Error: Can't connect to auth server at /var/run/dovecot/auth-master: No su

Error: Can't connect to auth server at /var/run/dovecot/auth-master: No such file or directory
error showing up, there is no auth-master file in /var/run/dovecot
this has just happnened over night
any ideas how to re-install dovecot
google search goes on about linux but barely any info about max osx server

auth-master is created when you start the mail service. Deleted if you stop the mail service. If that is not happening, you may have to re-install mail. Dovecot is the IMAP/POP part of the mail service. I am not sure what happens if you disable IMAP. I am guessing it is not there. But that is the extent of any tips I can offer. I suppose you could reinstall, but that seems a bit extreme to me.

Similar Messages

I can't get email. Get POP3 error . can't connect to POP3 server. It's not email vendor issue ... c

Good afternoon. For over a week I can't get email on MY DASH. Can't see mail in my Gmail Viewer. Get a POP3 error ... can't connect to POP server. Thought it may be a Gmail interface issue so tried to get Hotmail and then Earthlink email in the Chumby email app. Both give same message POP3 Error , can't connect to pop3 server. I have done multiplr hard restarts / power off / "restore to normal operation" procedures. I have searched the discussions and community and can find no mention of POP server issues. Please help .... advise. I'm a disabled, but still working, senior citizen without a fancy, internet, cell phone and my Dash's ability to display my email is very important to me. I have the Dash at my bedside and My Dash allows me to see a message from a client before I would otherwise rise. Kind regards, Martin

Hi USER-901698,
This is not an issue with the Sony device.
We highly suggest to contact your email service provider regarding your concern.
For further information, please check the link below.
https://us.en.kb.sony.com/app/answers/detail/a_id/32749/p/46543,46552,46553/c/65,66/kw/pop3
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

Can't connect to Application server

Hello.
i have installed sccm 2012 r2 with Application catalog web service and website roles. Status of all roles is "Ok".
But when i try to open http://ap-server/cmapplicationcatalog/, i get error "Can't connect to Application server"
What is the problem? Thanks.

If you have IPV6 enabled on SCCM server then disable it.
Few similar threads:-
http://social.technet.microsoft.com/Forums/en-US/267352b5-01d2-4c8e-b40b-0a7ab669b65b/application-catalog-cannot-connect-to-the-application-server-error?forum=configmanagerapps
http://social.technet.microsoft.com/Forums/en-US/e741b7db-26f1-45af-b074-77f420476267/application-catalog-cannot-connect-server-error-due-to-fqdn?forum=configmanagerapps
Prajwal Desai, http://prajwaldesai.com

Essbase Administration Services "Can not Connect to Administration Server"

Hi
Here I am installed Oracle EPM 11.1.2.2 Essbase,Planning and Reporting and after sucessfull configuration. When I tried to open Essbase Administration Console and there is no option to open administration console and I opened the Hyperion extraction setup folder and I installed Essbase Administration Console setup manuallay and after sucessful installation I try to Open and when I create new server and ir=ts created and then I am trying to connect server its throw this error
Error: Can not Connect to Administration Server
Please give me possitive things.
Thanks in advance..

Did you deploy the web applications to one managed server in the configurator, if you did then EAS is probably running on port 9000 so you would need to enter the server in the EAS console as servername:9000
Cheers
John
http://john-goodwin.blogspot.com/

TS1814 I had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
-Griff W.

Database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2) on mac os x 10.9.2

Dear Fellas:
I received "database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2)" on mac os x 10.9.2.
mysql info:
ps -ef | grep mysql
    0    66     1   0 11:06AM ??         0:00.04 /bin/sh /usr/local/mysql/bin/mysqld_safe --user=mysql
   74   225    66   0 11:06AM ??         0:02.50 /usr/local/mysql/bin/mysqld --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --plugin-dir=/usr/local/mysql/lib/plugin --user=mysql --log-error=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.err --pid-file=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.pid --socket=/var/run/mysqld/mysqld.sock
501   952   947   0 3:52PM ttys000    0:00.00 grep mysql
Please help!!

Fascinated and guessing:
Something related to sock(2) because that's not part of your copied info. I'm thinking you've doubled up on sockets and the second socket doesn't exist, meaning you should be connecting to the first socket "mysqld.sock" whether automatic or not.
I've only used GUI tools on purpose, so does this mean you've already got MySQL running and you tried to launch it again manually? Perhaps you already have one instance of a db and you're trying to launch a second instance, and the two can't coexist with a single user local db?
Assuming this is all local, I'd shut down the db service and restart it, out of hand. I've seen similar messages when I set the db to start up on boot, and it didn't finish shutting down when I tried to restart it manually. Usually the GUI won't let me turn it on because it reports it's already running, but in that case it hadn't finished performing what the GUI was reporting.
Just speculating.

Can't connect to a server? Error message

Hi, I have what I believe to be a strange problem. My internet service seems to be fine except I can't connect to any pages related to my internet service provider. I have no problems connecting to any other site page. When i try to connect to my providers home page or webmail service, I get an error:
can't open page because can't connect to the server www.9online.fr
How is it possible that this is the only page that does not work, and, it's my provider? Called them, they say there is no problem on their end, and that they can connect on a mac. Is it possible to block only one page? Was it something I might have done? And, is there a fix.
Many thanks,
M

I ran into a problem with my provider's personal web space. Basically, all I can see now is HTML code instead of the graphics I loaded over a year ago. I tried it from a PC on my LAN and it works fine. I can only assume that a OS X update did me in.
Are you by any chance using Verizon? That's where my problem lies.

-50 error: can't connect to server?

I purchased music. Then my Internet service went down. When the service came back up, when I go to Advanced/Check for Purchases, it says it's trying to access my purchases, and then I get a -50 error that says it can't connect to the server.
This has happened for about an hour now. What gives?

hi lawyervon!
hmmm. here's the standard documentation on a Music Store (-50):
http://docs.info.apple.com/article.html?artnum=93447
http://docs.info.apple.com/article.html?artnum=93434
... but it seems kind of odd that you'd be getting one all of a sudden under these circumstances ...
keep us posted.
love, b

HT5085 hi, i bought itunes match yesterday, and i can not connect with the server. Error 4010 appear ever time when i want to entry on Itunes match.Thanks

i bought itunes match yesterday and i can not connect with the server. Error 4010 appear every tiem when i want to entry on itunes match.
Thanks

Here are some things to try:
Close itunes
Check your internet settings.
Control Panel – Internet Options – Advanced
Check SSL 3.0 and TLS 1.0
Uncheck “Check for server certificate revocation (requires restart)”
Click Apply
Click Okay
Open itunes and try again
And, you don't need to turn off the firewall, just add itunes and itunes helper to your security software firewall.

I can´t set the control panel iCloud. PC writes this: you can not connect because the server error occurred. What´s matters?

I can´t set the control panel iCloud. PC writes this: you can not connect because the server error occurred. What´s matters?

Whenever I log into icloud.com
Using what version of which browser?
iCloud.com requires Safari 6 or later, Firefox 22 or later, or Google Chrome 28 or later. Have you tried all of those?
If you have, have you tried clearing your browser cache and cookies?
For the first tine since 1989 I'm thinking about buying a PC.
You'd have exactly the same problems on an 8 year old PC too. It's a bit unreasonable to expect such an old Mac to continue to be compatible as software is constantly updated.
Saying that, I'm still able to access iCloud.com successfully in Safari v5.0.6 on a PowerPC Mac running Mac OS X 10.5.8, so the problem you're having is likely to be a browser issue, not something inherently wrong with the computer.
Since all this crap started, Mail won't download my Mac.com or me.com email.
The iCloud.com website is totally unconnected to Mail's ability to download email via IMAP. Have you checked the mail server settings are correctly setup and up-to-date?

Error Message: -1 Can not connect to the server is the message I get?

I am getting a -1 error message that it can not connect to the server when I am trying to use the apps on my Photosmart 6510 e-all-in-one series. If someone can please help me fix this I will greatly appreciate it.

Hi there spicygirlbowtiq,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

ERROR#: 2002 can't connect to MySQL server through socket '/var/mysql/mysql.sock'

I was following this adobe article (
http://www.adobe.com/devnet/dreamweaver/articles/php_macintosh.html)
to set up PHP and MySQL and connect a MySQL database to dreamweaver
in Mac OS 10.4.8 and I kept getting:
"Can't connect to MySQL server through socket
'/var/mysql/mysql.sock' ERROR#: 2002".
After a lot of searching I came across
this
article which said that there was an error in the PHP and MySQL
connection or something.
Anyway all I had to do was type (in a TERMINAL window):
$ sudo mkdir /var/mysql
$ sudo ln -s /tmp/mysql.sock /var/mysql/mysql.sock
and that fixed the problem, otherwise the adobe article
worked very well.
Check out the "this article" link to get the fix straight
from the horse's mouth.

I was following this adobe article (
http://www.adobe.com/devnet/dreamweaver/articles/php_macintosh.html)
to set up PHP and MySQL and connect a MySQL database to dreamweaver
in Mac OS 10.4.8 and I kept getting:
"Can't connect to MySQL server through socket
'/var/mysql/mysql.sock' ERROR#: 2002".
After a lot of searching I came across
this
article which said that there was an error in the PHP and MySQL
connection or something.
Anyway all I had to do was type (in a TERMINAL window):
$ sudo mkdir /var/mysql
$ sudo ln -s /tmp/mysql.sock /var/mysql/mysql.sock
and that fixed the problem, otherwise the adobe article
worked very well.
Check out the "this article" link to get the fix straight
from the horse's mouth.

Installation error : Can't connect to X11 window server using ':0.0

Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
WHILE INSTALLING ORACLE10g ON FC1 GETING THIS ERROR
Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
:0.0
:0.0
Unable to start an interactive install session because of the following error:Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
HOW SHOULD I MAKE THE REQUIRED CHANGES

Check this thread:
Re: Can't connect to X11 window server using 'localhost:0.0'

Internet Download error message: the connection with the server has been reset

With an WRT54GS v6 firmware v 1.50.9 on Windows XP SP2 with Internet Explorer 7, Intel wireless internal adaptor w/ 802.11b, I was getting the error message "The connection with the server has been reset" when downloading most anything from the Internet. My IP address would then be reset and download would be interrupted. To resolve, I turned off the WZC (Wireless Zero Configuration) Services, and this seems to correct the problem.
Control Panel > Admin Tools > Services > Wireless Zero Configuration > Disable
Hopes this helps.

Hi!
Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
So, what can I do now?
Thanx

Remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed

remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed each time i try to open remote connection to the server,
does remote desktop connection manager V2.2 not compatible with windows 8.1, and if so, is there are any other compatible versions
or what's the problem,
Mahmoud Sabry IT System Engineer

this issue maybe will be fix by latest version, we still waiting for it
maybe your issue can be fix using this methods
https://social.technet.microsoft.com/Forums/windowsserver/en-US/61f218a5-5ef8-49da-a035-90cdd64fc9a0/problem-with-remote-desktop-connection-manager-error-3334?forum=winserverTS
http://shawn.meunier.com/?p=1#comment-43

Error: Can't connect to auth server at /var/run/dovecot/auth-master: No su

Similar Messages

Maybe you are looking for