Error - can't open application

I'm getting this error when trying to install photoshop:
You can't open the application "Adobe Photoshop CS6" because it's not supported on this type of Mac.
I've got a IMac duoCor 10.6.8...does this mean I need to buy a new Mac?

Hi Lenaeva,
Possibly, here are the system requirements
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X Mountain Lion (v10.8) when installed on Intel based systems.**
1GB of RAM
2GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 (1280x800 recommended) resolution display with 16-bit color and 512MB of VRAM
OpenGL 2.0–capable system
DVD-ROM drive
This software will not operate without activation. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.† Phone activation is not available.
You might not meet the first one there with some older processors.
This link might help:
http://support.apple.com/kb/HT3696
If its the Core Duo processor it is only 32-bit
-Dave

Similar Messages

App store error: can't open application

Please help. I updated my software about a year ago from 10.5.8 to 10.6.8. SInce then my app store shows as blocked. When I click to use it, it says the following: You can't open application app store because it may be damaged or incomplete. I really need to use my app store jsut for one app. Is there any other way I can go about downloading an app without the app store on my macbook pro?

Drag & drop the App Store app from the Apps folder to the Trash. Then download and install this update combo over your current installation.
OS X Snow Leopard 10.6.8 v1.1 update combo
http://support.apple.com/kb/DL1399

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds.

I keep getting error message, "can't open application PACE because PowerPC applications are no longer supported." I've run Clean My Mac and I still get the error.

I keep getting error message, "can't open application PACE because PowerPC applications are no longer supported." I've run Clean My Mac and I still get the error.

Use the Finder "Go" menu while holding down the option key to expose your User / Library folder.
Look in the Application Support folder for PACE items and delete them.

Command line: Error: unable to open '/Applications/flex_sdk_4\frameworks\flex-config.xml'

Hi,
I am new to flex. I am trying to use the xmp sdk to create custom file info panels in photoshop.
I am going through the example show in the adobe documentation 'Building a panel with Flex SDK'
I got any running and I got all the files setup in the proper folders but I cannot for the life of me figure out why I keep getting this error.
Buildfile: /Volumes/three/2011/XMP/test project/build.xml
clean:
buildPanel:
     [echo] --> Panel 'Test2'
    [compc] Adobe Compc (Flex Component Compiler)
    [compc] Version 4.5.1 build 21328
    [compc] Copyright (c) 2004-2011 Adobe Systems, Inc. All rights reserved.
    [compc] command line: Error: unable to open '/Applications/flex_sdk_4.5\frameworks\flex-config.xml'
    [compc] Use 'compc -help' for information about using the command line.
BUILD FAILED
/Volumes/three/2011/XMP/test project/build.xml:20: compc task failed
Total time: 616 milliseconds
thanks,
digitalkyle

can you tell us where your services-config.xml file is
located. can you make sure it is right under the "src" folder of
the Flex Builder project.
Hope this helps.

"you can't open application NotificationExec because PowerPC applications are no longer supported" continually appearing on my screen

I have an iMac with Lion 10.7.4 and tonight I tried to download and install a Maxstor drive from the internet, since then the following notice has appeared on my screen at approximately 6 second intervals. “you can’t open application NotificationExec because PowerPC applications are no longer supported” I have removed the Maxtor manager via the waste basket but the notices keep appearing. Is there a way for me to stop these as they make my iMac virtually unusable or is this a virus?

none of the above worked for me....this worked after hours of messing around with Libraries, deleting things, etc.
Absolutely frustrated by the same problem, just lost 3 hours of my day trying to uninstall after getting the same error message. The ONLY thing that worked for me was going to the following Maxtor (Seagate) URL:
http://knowledge.seagate.com/articles/en_US/FAQ/199931en
I downloaded their "remove maxtor sw.zip" file
Click here to download the remove_maxtor_sw.zip file and store it on your system's desktop.
And it worked perfectly. Took 10 seconds and - after restarting - it was done.
What a waste of the day!!!

I can't open application "Setup EXE" because Microsoft Windows applications are not supported on OS X.

I can't open application "Setup Exe" because Microsoft Windows applications are not supported on OS X! How do I install Windows software?

Sorry I misinformed you this is update bundle, if you already have Office installe, you can search Amazon for Micrsoft Office for Mac, sorry for the error,
Check here:
http://www.amazon.com/Office-Mac-Home-Student-2011/dp/B0064PFB9U/ref=sr_1_1?ie=U TF8&qid=1387734396&sr=8-1&keywords=microsoft+office+mac+download
Also check around you may find better pricing, I included tis for an example.

Quicktime-no sound & Broadcaster Error - Can't Open Handler (-2004)

Greetings - I made the following post in the Tiger forum and after 3 days have received no response. Hopefully I'll have better luck here. Thanks in advance.
10.4.7
MacbookPro Intel Core Duo
Suddenly some problems.
My Fireworks 8 will no longer open. I get a Macromedia error pop-up stating "A problem was detected with your application. Please reinstall software to correct the problem."
So I reinstall.
Same problem! Reinstallation does not fix.
Also, I now have no sound with Quicktime. All other system sounds are fine, DVD player, sound applications like Peak. But Quicktime is silent.
Lastly - my Quicktime Broadcaster is no longer working.
Video is no longer appearing in the source preview. (although I can confirm that the camera is working when I click on options for "built in iSight." I DO see video in the "Video Adjustments" window.
Futhermore, if I click on "broadcast" I get this error "Broadcaster Error - Can't Open Handler (-2004)
Argghhh.
Any suggestions for me?
Thanks!

I doubt it is corrupt you could try to delete it but that will probably cause a problem with QT. What is the turn of events that took you to the registry?
This is a permissions issue. What account originally installed QT? Are you an administrator account? You need to take Full Control or Ownership of the item in the registry or QT with a administrator account. Whatever account you're using, now, either is not an administrator account or it is being denied permissions. At worse I would think you might have to create another administrator account to take ownership and full control. There are at least 2 on the computer now.

Error can't open display after reboot

Hi,
I encounter this problem :
I just install SSGD 4.2 on Solaris 10 01/06 T2000 server. After installation I can connect to the SSGD using browser from my notebook, and can try the various demo (dtterm, xclock etc)
I reboot the Solaris 10 OS.
After reboot I tried to login again via browser in my notebook and try to run the various demo.
I can login, but almost all the demo failed to execute, the X applications give error "can't open display:" with no hostname following the error.
The only demo still runs is the vt420 demo
Anybody can help me to point out what causes the problem ? I am trying to demo this SSGD software to a customer.
Regards
Adrianus B. Kurnadi

I've noticed this as well, under Solaris 10 FCS, Solaris 10 U1, and Solaris Express nv_39.
However, I have tried it out under S8 02/04, and S9 09/04 and I do not have this problem after rebooting the host at all.
For the hell of it, I (rather badly) converted the S89/S90 startup scripts to be SMF manifests with S90Tarantella having a dependancy on tS89TarantellaWebServer as I thought perhaps there was a strange issue with the tta process starting before the web service had fully started (beats me why it would matter, ends up it didn't) - as my test S10 host is a slow Netra T1.
I'd be interested to know what the difference is between it being started up via an rc2.d script and the root user logging into the system console running /opt/tarantella/bin/tarantella start. I haven't even bothered starting to try to observe the environment differences between startup via SMF in S10 and init.d in S8.
</2.2c>
Andrew

Xclock Error: Can't open display: - after upgrading to openSSH 5.2p1

I have got two servers apssvrX and apssvrZ on OEL. Both were built by the same team using their standard build scripts.
Having received the servers I had installed Oracle (ODI) product on it successfully.
Then as a part of requirement and as per Oracle support's advise, I had upgraded the ssh version on apssvrX server from OpenSSH_4.3p2 To OpenSSH_5.2p1, so that, I can implement the chroot jailing.
As per Oracle advise, I had downloaded the 3 RPMs from "_http://layer1.rack911.com/openssh/rhel5/x86_64/" to run them on my first server i.e., apssvrX and then configured the sshd services following the below steps:
a) Modify /etc/ssh/sshd_config to comment the below line:
#Subsystem sftp /usr/libexec/openssh/sftp-server
b) Add below lines:
Subsystem sftp internal-sftp
Match Group sftponly
ChrootDirectory %h
X11Forwarding no
AllowTcpForwarding no
ForceCommand internal-sftp
Then lastly, Restart sshd services complete the configuration
# /etc/init.d/sshd restart
apssvrX server current details are as below:
apssvrX$ uname -a
Linux apssvrX 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
apssvrX$ ssh -V
OpenSSH_5.2p1, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
My problems started from this point onwards. I want to install another Oracle product using OUI, but when I try to execute xclock using the Exceed HummingBird tool on apssvrX server then it fails with the error - (xclock) Error: Can't open display:
I tried the DISPLAY variable setup as well but to no use.
Whereas I can successfully execute the xclock on apssvrZ and OUI as well. Its config details are as below:
apssvrZ$ uname -a
Linux apssvrZ 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
apssvrZ$ ssh -V
OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
Please advise the way forward.

Tried but still same error.
Affected servers's sshd_config is as below:
[root@apssvrX]# cat /etc/ssh/sshd_config
# $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options change a
# default value.
#Port 22
Protocol 2
Protocol 2
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 768
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
SyslogFacility AUTHPRIV
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
PermitRootLogin without-password
#StrictModes yes
#MaxAuthTries 6
#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile .ssh/authorized_keys
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
PasswordAuthentication yes
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIAuthentication no
GSSAPIAuthentication yes
#GSSAPICleanupCredentials yes
GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication mechanism.
# Depending on your PAM configuration, this may bypass the setting of
# PasswordAuthentication, PermitEmptyPasswords, and
# "PermitRootLogin without-password". If you just want the PAM account and
# session checks to run without PAM authentication, then enable this but set
# ChallengeResponseAuthentication=no
#UsePAM no
UsePAM yes
# Accept locale-related environment variables
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#ShowPatchLevel no
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10
#PermitTunnel no
# no default banner path
#Banner /some/path
# override default of no subsystems
Subsystem sftp /usr/libexec/openssh/sftp-server
## Commented the sftp jailing configuration
##Subsystem sftp internal-sftp
##Match Group sftponly
## ChrootDirectory %h
## X11Forwarding no
## AllowTcpForwarding no
## ForceCommand internal-sftp

X11 remote app and XQuartz and xterm Xt error: Can't open display: %s

Hi
I have Snow Leopard (10.8.4) and XQuartz on it I need to run X11 remote app on redhat.
On local host echo $DISPLAY shows /tmp/launch-d33HNb/org.macosforge.xquartz:0
When i do ssh -X (or -Y) [email protected] and try to run xterm i got:
xterm Xt error: Can't open display: %s
xterm: DISPLAY is not set
the sshd_config on remote host has
cat /etc/ssh/sshd_config | grep X11
#X11Forwarding no
X11Forwarding yes
X11DisplayOffset 10
#X11UseLocalhost yes
Question is do i need to set up DISPLAY variable on remote host?
If yes which display number do i choose?
if i do export DISPLAY=<my mac ip>:10.0 or export DISPLAY=<my mac ip>:0.0
i still have message xterm Xt error: Can't open display: %s
Maybe this will help also
ssh -v -v -Y [email protected]
OpenSSH_5.9p1, OpenSSL 0.9.8x 10 May 2012
debug1: Reading configuration data /etc/ssh_config
debug1: /etc/ssh_config line 20: Applying options for *
debug1: /etc/ssh_config line 53: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to 172.20.0.12 [172.20.0.12] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /var/root/.ssh/id_rsa type -1
debug1: identity file /var/root/.ssh/id_rsa-cert type -1
debug1: identity file /var/root/.ssh/id_dsa type -1
debug1: identity file /var/root/.ssh/id_dsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3
debug1: match: OpenSSH_4.3 pat OpenSSH_4*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.9
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie- hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-g roup1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 110/256
debug2: bits set: 492/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA 92:ac:c2:7b:1e:ba:6b:62:9b:32:3e:14:c6:87:a7:59
debug1: Host '172.20.0.12' is known and matches the RSA host key.
debug1: Found key in /var/root/.ssh/known_hosts:2
debug2: bits set: 524/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /var/root/.ssh/id_rsa (0x0)
debug2: key: /var/root/.ssh/id_dsa (0x0)
debug1: Authentications that can continue: publickey,gssapi-with-mic,password
debug1: Next authentication method: publickey
debug1: Trying private key: /var/root/.ssh/id_rsa
debug1: Trying private key: /var/root/.ssh/id_dsa
debug2: we did not send a packet, disable method
debug1: Next authentication method: password
[email protected]'s password:
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
Authenticated to 172.20.0.12 ([172.20.0.12]:22).
debug1: channel 0: new [client-session]
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: client_session2_setup: id 0
debug2: fd 3 setting TCP_NODELAY
debug2: channel 0: request pty-req confirm 1
debug1: Sending environment.
debug2: channel 0: request shell confirm 1
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel_input_status_confirm: type 99 id 0
debug2: PTY allocation request accepted on channel 0
debug2: channel 0: rcvd adjust 2097152
debug2: channel_input_status_confirm: type 99 id 0
debug2: shell request accepted on channel 0
Last login: Thu Jun 6 09:12:43 2013 from 172.20.0.17
[root@npecdp01 ~]#

Jeffrey Jones2 wrote:
I'm always looking for new tricks of the trade.
I remember now why I originally changed the ssh config file. Here is another trick: In a text editor, type
ssh://[email protected]
making the obvious substitutions. Select the line and drag it to the Desktop. It will create an inetloc file that, when double-clicked, opens a Terminal window and connects to the ssh session. I have several of these in my Dock.
That is a neat trick. However, with LaunchPad I'm not much of a Finder double-clicker anymore. What is interesting is that the OS knows how to handle the ssh protocol. You can also type "open ssh://[email protected]" for the same effect. That may not seem like much of a gain, but it reveals some interesting OS-level possibilities.
With an RSA key, I don't even need a password
You can use the newer DSA keys. There is another neat trick too. Pretty much every set of instructions I've seen online suggests using an empty private key password because running ssh-agent is such a hassle on Linux. It is built-in to OS X. So, on OS X, you can create more secure DSA private keys with pass phrases that are stored (and encrypted) in your keychain. You only have to supply the Then, even if someone gets your private keys, they get nothing.

Adobe photoshop lightroom won't install on my Mac - error can not open file

Adobe Photoshop Lightroom4 will not install on my Mac. "Error can not open file" when trying to open will installer. If I cannot get it to work I would like to return product.

What version of Mac OS are you using? What is the exact name of the file which you are double clicking on? If you right click on the file and select Get Info what does it state under the Open With section?

I have an iMac 10.8.2. When trying to download a photo attachment from an email I received the following : "You can't open application IPhoto because the classic environment is no longer supported." This occurred on 10/25/12 at about 11PM CST. The iPho

I have an iMac 10.8.2. When trying to download a photo attachment from an email I received the following : "You can't open application IPhoto because the classic environment is no longer supported." This occurred on 10/25/12 at about 11PM CST. The iPhoto icon in both the dock and the application folder is grayed out with the no or do not enter symbol. How can I resolve this so I can access my photos?

I have two iPhoto icons in applications. One is grayed out and has the no symbol, the date of last modification is Oct 25, 2012 11:07pm. The size is 110 KB and kind shows Applic…lassie). When I click on with CMD i it shows:
kind: Application (Classic)
size: 109,677 bytes (111 KB on disk)
Where: / Applications
Created: Thursday, October 25, 2012 11:07 PM
Modified: Thursday, October 25, 2012 11:07 PM
Version: --
More info: --
Name and extension: iPhoto.app
Hide extension is grayed out and checked
Preview shows a photo I had attempted to save to iPhoto
The second iPhoto icon is also grayed out, but the symbol is an envelope, the date of last modification is Oct 12, 2012 12:09PM. The size is 548 KB and kind is shown as an email message. When I clicked on it with CMD i it shows:
Kind: Email Message
Size: 547,665 bytes (549 KB on disk)
Where: /Applications
Created: Friday, October 12, 2012 12:09 PM
Modified: Friday, October 12, 2012 12:09 PM
Version: not listed
Name & Extension: iPhoto.eml
Hide Extension: checked
Open with: Mail
Preview shows a photo I had attempted to save to iPhoto

Error : "Can't open boot_archive"

Hello, I am having an issue with a SUN FIRE V240 (SOLARIS 10).
The server doesn't boot, normally , first we had a file system error (bellow) and now we have an other error message "Can't open boot_archive"
====================+FIRST ERROR MESSAGES+===================================================
Unable to repair the / filesystem. Run fsck manually
(fsck -F ufs /dev/md/rdsk/d400).
====================================================================================
1) i tried to repair manually the disc with "fsck -F ufs /dev/md/rdsk/d400" , but I wasn't able to run fsck
2) I decided to boot the server with the solaris dvd
"boot cdrom -s" to try to repair the mirror "fsck -F ufs /dev/rdsk/c0t0d0s0" but I couldn't.
3) So I have decided to restore the root from the most recent backup tape that I have
4)I have mounted the root and all the other partitions from /a/etc/vfstab & /a/etc/system"
5) I have tried to update the boot archive but it didn't work and I had this error message *"not a boot archive based Solaris instance"*
6) Then I have reboot the server and since I see this two errors *"Can't open boot_archive" et "The file just loaded does not appear to be executable"*
=================the error that I see everytime the server boot===============================================
*"Can't open boot_archive" et "The file just loaded does not appear to be executable"*
I would appreciate any help

Have you tried to boot the system from OBP with the following command: boot -F failsafe

AIR 16.0 Error: can't open -non_global_symbols_no_strip_list file: ......aot/lib/local_nostrip.arm-air.txt

When package app with the new AIR 16.0 build 245 and ANE, the following error occur.
ld: Error: can't open -non_global_symbols_no_strip_list file: ......aot/lib/local_nostrip.arm-air.txt

Hi DigiCrafts,
It seems you are doing something wrong at your end. I have used the swf and ane provided by you and I am able to create an ipa. For your reference I am pasting the command I Used.
~/archive_air_16.0_with_asc2_drm_sdk/bin/adt -package -target ipa-app-store -provisioning-profile <abcd.mobileprovision> -storetype pkcs12 -keystore <abcd.p12> -storepass <password> Temp.ipa app.xml ShipSim.swf -extdir /Users/abhisek/Downloads/ane-error/bin/

Error - can't open application

Similar Messages

Maybe you are looking for