Error : "Can't open boot_archive"

Hello, I am having an issue with a SUN FIRE V240 (SOLARIS 10).
The server doesn't boot, normally , first we had a file system error (bellow) and now we have an other error message "Can't open boot_archive"
====================+FIRST ERROR MESSAGES+===================================================
Unable to repair the / filesystem. Run fsck manually
(fsck -F ufs /dev/md/rdsk/d400).
====================================================================================
1) i tried to repair manually the disc with "fsck -F ufs /dev/md/rdsk/d400" , but I wasn't able to run fsck
2) I decided to boot the server with the solaris dvd
"boot cdrom -s" to try to repair the mirror "fsck -F ufs /dev/rdsk/c0t0d0s0" but I couldn't.
3) So I have decided to restore the root from the most recent backup tape that I have
4)I have mounted the root and all the other partitions from /a/etc/vfstab & /a/etc/system"
5) I have tried to update the boot archive but it didn't work and I had this error message *"not a boot archive based Solaris instance"*
6) Then I have reboot the server and since I see this two errors *"Can't open boot_archive" et "The file just loaded does not appear to be executable"*
=================the error that I see everytime the server boot===============================================
*"Can't open boot_archive" et "The file just loaded does not appear to be executable"*
I would appreciate any help

Have you tried to boot the system from OBP with the following command: boot -F failsafe

Similar Messages

Xclock Error: Can't open display: - after upgrading to openSSH 5.2p1

I have got two servers apssvrX and apssvrZ on OEL. Both were built by the same team using their standard build scripts.
Having received the servers I had installed Oracle (ODI) product on it successfully.
Then as a part of requirement and as per Oracle support's advise, I had upgraded the ssh version on apssvrX server from OpenSSH_4.3p2 To OpenSSH_5.2p1, so that, I can implement the chroot jailing.
As per Oracle advise, I had downloaded the 3 RPMs from "_http://layer1.rack911.com/openssh/rhel5/x86_64/" to run them on my first server i.e., apssvrX and then configured the sshd services following the below steps:
a) Modify /etc/ssh/sshd_config to comment the below line:
#Subsystem sftp /usr/libexec/openssh/sftp-server
b) Add below lines:
Subsystem sftp internal-sftp
Match Group sftponly
ChrootDirectory %h
X11Forwarding no
AllowTcpForwarding no
ForceCommand internal-sftp
Then lastly, Restart sshd services complete the configuration
# /etc/init.d/sshd restart
apssvrX server current details are as below:
apssvrX$ uname -a
Linux apssvrX 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
apssvrX$ ssh -V
OpenSSH_5.2p1, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
My problems started from this point onwards. I want to install another Oracle product using OUI, but when I try to execute xclock using the Exceed HummingBird tool on apssvrX server then it fails with the error - (xclock) Error: Can't open display:
I tried the DISPLAY variable setup as well but to no use.
Whereas I can successfully execute the xclock on apssvrZ and OUI as well. Its config details are as below:
apssvrZ$ uname -a
Linux apssvrZ 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
apssvrZ$ ssh -V
OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
Please advise the way forward.

Tried but still same error.
Affected servers's sshd_config is as below:
[root@apssvrX]# cat /etc/ssh/sshd_config
# $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options change a
# default value.
#Port 22
Protocol 2
Protocol 2
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 768
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
SyslogFacility AUTHPRIV
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
PermitRootLogin without-password
#StrictModes yes
#MaxAuthTries 6
#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile .ssh/authorized_keys
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
PasswordAuthentication yes
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIAuthentication no
GSSAPIAuthentication yes
#GSSAPICleanupCredentials yes
GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication mechanism.
# Depending on your PAM configuration, this may bypass the setting of
# PasswordAuthentication, PermitEmptyPasswords, and
# "PermitRootLogin without-password". If you just want the PAM account and
# session checks to run without PAM authentication, then enable this but set
# ChallengeResponseAuthentication=no
#UsePAM no
UsePAM yes
# Accept locale-related environment variables
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#ShowPatchLevel no
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10
#PermitTunnel no
# no default banner path
#Banner /some/path
# override default of no subsystems
Subsystem sftp /usr/libexec/openssh/sftp-server
## Commented the sftp jailing configuration
##Subsystem sftp internal-sftp
##Match Group sftponly
## ChrootDirectory %h
## X11Forwarding no
## AllowTcpForwarding no
## ForceCommand internal-sftp

X11 remote app and XQuartz and xterm Xt error: Can't open display: %s

Hi
I have Snow Leopard (10.8.4) and XQuartz on it I need to run X11 remote app on redhat.
On local host echo $DISPLAY shows /tmp/launch-d33HNb/org.macosforge.xquartz:0
When i do ssh -X (or -Y) [email protected] and try to run xterm i got:
xterm Xt error: Can't open display: %s
xterm: DISPLAY is not set
the sshd_config on remote host has
cat /etc/ssh/sshd_config | grep X11
#X11Forwarding no
X11Forwarding yes
X11DisplayOffset 10
#X11UseLocalhost yes
Question is do i need to set up DISPLAY variable on remote host?
If yes which display number do i choose?
if i do export DISPLAY=<my mac ip>:10.0 or export DISPLAY=<my mac ip>:0.0
i still have message xterm Xt error: Can't open display: %s
Maybe this will help also
ssh -v -v -Y [email protected]
OpenSSH_5.9p1, OpenSSL 0.9.8x 10 May 2012
debug1: Reading configuration data /etc/ssh_config
debug1: /etc/ssh_config line 20: Applying options for *
debug1: /etc/ssh_config line 53: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to 172.20.0.12 [172.20.0.12] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /var/root/.ssh/id_rsa type -1
debug1: identity file /var/root/.ssh/id_rsa-cert type -1
debug1: identity file /var/root/.ssh/id_dsa type -1
debug1: identity file /var/root/.ssh/id_dsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3
debug1: match: OpenSSH_4.3 pat OpenSSH_4*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.9
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie- hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-g roup1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 110/256
debug2: bits set: 492/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA 92:ac:c2:7b:1e:ba:6b:62:9b:32:3e:14:c6:87:a7:59
debug1: Host '172.20.0.12' is known and matches the RSA host key.
debug1: Found key in /var/root/.ssh/known_hosts:2
debug2: bits set: 524/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /var/root/.ssh/id_rsa (0x0)
debug2: key: /var/root/.ssh/id_dsa (0x0)
debug1: Authentications that can continue: publickey,gssapi-with-mic,password
debug1: Next authentication method: publickey
debug1: Trying private key: /var/root/.ssh/id_rsa
debug1: Trying private key: /var/root/.ssh/id_dsa
debug2: we did not send a packet, disable method
debug1: Next authentication method: password
[email protected]'s password:
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
Authenticated to 172.20.0.12 ([172.20.0.12]:22).
debug1: channel 0: new [client-session]
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: client_session2_setup: id 0
debug2: fd 3 setting TCP_NODELAY
debug2: channel 0: request pty-req confirm 1
debug1: Sending environment.
debug2: channel 0: request shell confirm 1
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel_input_status_confirm: type 99 id 0
debug2: PTY allocation request accepted on channel 0
debug2: channel 0: rcvd adjust 2097152
debug2: channel_input_status_confirm: type 99 id 0
debug2: shell request accepted on channel 0
Last login: Thu Jun 6 09:12:43 2013 from 172.20.0.17
[root@npecdp01 ~]#

Jeffrey Jones2 wrote:
I'm always looking for new tricks of the trade.
I remember now why I originally changed the ssh config file. Here is another trick: In a text editor, type
ssh://[email protected]
making the obvious substitutions. Select the line and drag it to the Desktop. It will create an inetloc file that, when double-clicked, opens a Terminal window and connects to the ssh session. I have several of these in my Dock.
That is a neat trick. However, with LaunchPad I'm not much of a Finder double-clicker anymore. What is interesting is that the OS knows how to handle the ssh protocol. You can also type "open ssh://[email protected]" for the same effect. That may not seem like much of a gain, but it reveals some interesting OS-level possibilities.
With an RSA key, I don't even need a password
You can use the newer DSA keys. There is another neat trick too. Pretty much every set of instructions I've seen online suggests using an empty private key password because running ssh-agent is such a hassle on Linux. It is built-in to OS X. So, on OS X, you can create more secure DSA private keys with pass phrases that are stored (and encrypted) in your keychain. You only have to supply the Then, even if someone gets your private keys, they get nothing.

Adobe photoshop lightroom won't install on my Mac - error can not open file

Adobe Photoshop Lightroom4 will not install on my Mac. "Error can not open file" when trying to open will installer. If I cannot get it to work I would like to return product.

What version of Mac OS are you using? What is the exact name of the file which you are double clicking on? If you right click on the file and select Get Info what does it state under the Open With section?

AIR 16.0 Error: can't open -non_global_symbols_no_strip_list file: ......aot/lib/local_nostrip.arm-air.txt

When package app with the new AIR 16.0 build 245 and ANE, the following error occur.
ld: Error: can't open -non_global_symbols_no_strip_list file: ......aot/lib/local_nostrip.arm-air.txt

Hi DigiCrafts,
It seems you are doing something wrong at your end. I have used the swf and ane provided by you and I am able to create an ipa. For your reference I am pasting the command I Used.
~/archive_air_16.0_with_asc2_drm_sdk/bin/adt -package -target ipa-app-store -provisioning-profile <abcd.mobileprovision> -storetype pkcs12 -keystore <abcd.p12> -storepass <password> Temp.ipa app.xml ShipSim.swf -extdir /Users/abhisek/Downloads/ane-error/bin/

Server 280R is showing the error can't open PAM library

Hello Guys,
Please help me to overcome this error .server is showing the error can't open the PAM library contact system administrator.i heard that i have to install one package to fix this problem that package is SUNnspr.but this package i am not getting any where from sun site .so kindly any body can help me what to do now.shall i install the os again or any other process is there.and the server is also not booting.
Its very urgent

Try searching for SUNWnspr in your Solaris CDs / DVD. Its there. Once you find it, use pkgadd to install the package and if you have access to sunsolve, apply the latest nspr patch (I think this patch available for SunOS 5.8 in patch 119209-11, for SunOS 5.9 in patch 119211-11, for SunOS 5.10 in patch 119213-11, for SunOS 5.9_x86 in patch 119212-11, for SunOS 5.10_x86 in patch 119214-11).

Server0 not starting; ERROR = Can't open property file

Hi,
I have installed SAP EP 6.0 and it was working fine till yesterday.
But now when I am trying to open the Portal (http://hostname:50000/irj) it says Page cannot be displayed.
Also when I try to login to Visual Admin I get this error message:-
Unable to lookup connection Default http://sbdep:8101/msgserver/text/logon returned empty list of connection parameters
I restarted the EP instance (not rebooted) and the JC00 and SCS01 have started normally,but portal is till not UP.
Have found the following details in the logs:-
dev_jcontrol :-
[Thr 47609482135840] *** ERROR => Can't open property file [/usr/sap/EPD/JC00/SDM/program/config/sdm_jstartup.properties] [jstartxx_mt. 1952]
[Thr 47609482135840] *** ERROR => JStartupReadArgumentsEx: can't enumerate nodes [/usr/sap/EPD/JC00/j2ee/cluster/instance.properties:/usr/sap/EPD/JC00/SDM/program/config/sdm_jstartup.properties] (rc = -1) [jstartxx_mt. 524]
Kindly suggest where cud be the issue and how do I proceed.
Rgds,
Abhijeet

Hi,
- I think firstly, you need to ensure following files is restored or available as per location
1. instance.properties file
2. sdm_jstartup.properties file
and restart instance
- check if any profile changes
Regards,
Vincent

Quicktime-no sound & Broadcaster Error - Can't Open Handler (-2004)

Greetings - I made the following post in the Tiger forum and after 3 days have received no response. Hopefully I'll have better luck here. Thanks in advance.
10.4.7
MacbookPro Intel Core Duo
Suddenly some problems.
My Fireworks 8 will no longer open. I get a Macromedia error pop-up stating "A problem was detected with your application. Please reinstall software to correct the problem."
So I reinstall.
Same problem! Reinstallation does not fix.
Also, I now have no sound with Quicktime. All other system sounds are fine, DVD player, sound applications like Peak. But Quicktime is silent.
Lastly - my Quicktime Broadcaster is no longer working.
Video is no longer appearing in the source preview. (although I can confirm that the camera is working when I click on options for "built in iSight." I DO see video in the "Video Adjustments" window.
Futhermore, if I click on "broadcast" I get this error "Broadcaster Error - Can't Open Handler (-2004)
Argghhh.
Any suggestions for me?
Thanks!

I doubt it is corrupt you could try to delete it but that will probably cause a problem with QT. What is the turn of events that took you to the registry?
This is a permissions issue. What account originally installed QT? Are you an administrator account? You need to take Full Control or Ownership of the item in the registry or QT with a administrator account. Whatever account you're using, now, either is not an administrator account or it is being denied permissions. At worse I would think you might have to create another administrator account to take ownership and full control. There are at least 2 on the computer now.

Error can't open display after reboot

Hi,
I encounter this problem :
I just install SSGD 4.2 on Solaris 10 01/06 T2000 server. After installation I can connect to the SSGD using browser from my notebook, and can try the various demo (dtterm, xclock etc)
I reboot the Solaris 10 OS.
After reboot I tried to login again via browser in my notebook and try to run the various demo.
I can login, but almost all the demo failed to execute, the X applications give error "can't open display:" with no hostname following the error.
The only demo still runs is the vt420 demo
Anybody can help me to point out what causes the problem ? I am trying to demo this SSGD software to a customer.
Regards
Adrianus B. Kurnadi

I've noticed this as well, under Solaris 10 FCS, Solaris 10 U1, and Solaris Express nv_39.
However, I have tried it out under S8 02/04, and S9 09/04 and I do not have this problem after rebooting the host at all.
For the hell of it, I (rather badly) converted the S89/S90 startup scripts to be SMF manifests with S90Tarantella having a dependancy on tS89TarantellaWebServer as I thought perhaps there was a strange issue with the tta process starting before the web service had fully started (beats me why it would matter, ends up it didn't) - as my test S10 host is a slow Netra T1.
I'd be interested to know what the difference is between it being started up via an rc2.d script and the root user logging into the system console running /opt/tarantella/bin/tarantella start. I haven't even bothered starting to try to observe the environment differences between startup via SMF in S10 and init.d in S8.
</2.2c>
Andrew

Error can't open display while installation

Hi,
While installting oracle, i am unable to launch the oracle universal installer. I have already set the DISPLAY value to IPAddress.
I am installing it from ora<sid>, it asking about xlock. When i am running it from root, i am able to open up xclock. But i am unable to open up xclock from ora<sid>. It is giving error as error: can't open display.
Please suggest the solution.
Regards
Karunakar

Hello,
It already solved!
What I did was:
Open a new Term. session.
Under root user I ran
#xhost + *
(this enables the X window for all users)
Then I don´t needed to set the Display variable with the value user within that Term. session.
#echo $DISPLAY
#:0.0
... then I test xclock to validate the display functionality and then I start oracle wizard installation with command
#./RUNINSTALLER
The oracle installation finish without problems!
Best regards,
João Dimas - Portugal

Error : Can't open local data port

Hello:
I�d like present this problem to yours:
I am executing two files Client/Server into my own PC, using two DOS console different, this one to Client an another to Server.
I got this error:
Output of the CLient (DOS Console of the client)
C:\RUN\EX14>java AVReceive2 1.1.9.147/45300
- Open RTP session for: addr: 1.1.9.147 port: 45300 ttl: 1
- Waiting for RTP data to arrive...
- Waiting for RTP data to arrive...
- A new participant had just joined: mpalacios@mpv
- Waiting for RTP data to arrive...
- Waiting for RTP data to arrive...
Output of the Server (DOS Console of the Server)
C:\RUN\EX14>java AVTransmit2 file:/c:/run/format/au/drip.au 1.1.9.147 45300
Track 0 is set to transmit as:
ULAW/rtp, 8000.0 Hz, 8-bit, Mono, FrameSize=8 bits
Error : Can't open local data port: 45300
Well, 1.1.9.147 is the IP address of my PC.
So, What�s the problem?
If you need of the rest of code, please say me.
Thanks.
Angel.

Well, I am agree with you, but I have this code in the Transmit File (Server):
* Use the RTPManager API to create sessions for each media track of the processor.
private String createTransmitter() {
     // Cheated. Should have checked the type.
     PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
     PushBufferStream pbss[] = pbds.getStreams();
     rtpMgrs = new RTPManager[pbss.length];
     SessionAddress localAddr, destAddr;
     InetAddress ipAddr;
     SendStream sendStream;
     int port;
     SourceDescription srcDesList[];
     for (int i = 0; i < pbss.length; i++) {
     try {
          rtpMgrs[i] = RTPManager.newInstance();
//The local session address will be created on the
// same port as the the target port. This is necessary
// if you use AVTransmit2 in conjunction with JMStudio.
// JMStudio assumes - in a unicast session - that the
// transmitter transmits from the same port it is receiving
// on and sends RTCP Receiver Reports back to this port of
// the transmitting host.
          port = portBase + 2*i;
          ipAddr = InetAddress.getByName(ipAddress);
          localAddr = new SessionAddress( InetAddress.getLocalHost(),
                                   port);
          destAddr = new SessionAddress( ipAddr,
                              port);
          rtpMgrs.initialize( localAddr);
          rtpMgrs[i].addTarget( destAddr);
          System.err.println( "Created RTP session: " + ipAddress + " " + port);
          sendStream = rtpMgrs[i].createSendStream(dataOutput, i);
          sendStream.start();
     } catch (Exception e) {
          return e.getMessage();
     return null;
When I use this Files (Client/Server), between diffrent PCs into LAN, eg, Client (One PC) and Server (Another PC), but I used:
This One PC: (IP Address PC = 1.1.9.150)
C:\run\ex14\java AVTransmit2 file:/c:/run/format/audrip.au 1.1.9.147 45300
Another PC:(IP Address PC = 1.1.9.147)
C:\run\ex14\java AVReceive2 1.1.9.147/45300
That�s work right!
So, what�s happen?

Error: Can't open display: localhost:0.0

Hi all,
Please help to solve the problem of x display, thanks a lot!
$DISPLAY=localhost:0.0; export DISPLAY
$xhost +sky
xhost: unable to open display "localhost:0.0"
$xclock
Error: Can't open display: localhost:0.0
Vivia/en

reboot
or
using xmanager tool

Xterm: Xt error: Can't open display: xterm: DISPLAY is not set

Hello, I am completely new to networking/systems. I have been asked to complete an open flow tutorial ( http://www.openflow.org/wk/index.php/OpenFlow_Tutorial ) I have fininshed a part of the tutorial and when i used "ssh -X [email protected]**.*", I was able to log in successfully but when i type in Xterm, it says "xterm: Xt error: Can't open display: xterm: DISPLAY is not set". I have downloaded virtual box, XQuartz and an ovf file as given in teh tutorial. I don't know what the problem is. Can someone please guide me through this? Thank you so much!

I didn't quite understand what you were saying but when i typed "ssh -Y ..." this is what happened:
mobile-172-16-103-167:~ mininet$ ssh -Y [email protected]
Password:
Last login: Sat May 18 20:25:50 2013 from 192.168.56.1
mobile-172-16-103-167:~ mininet$
ssh -X and ssh -Y do essentially the same thing. -Y is just less restrictive on X11 return traffic authority (basically it tells the local X11 display server that you trust the remote system sending X11 traffic to it).
Now what you are display seems strange. You prompt implies that your current system's IP address is 172.16.103.167 and you are ssh'ing to 192.168.56.1. You get a password prompt as expected, but then the "Last Login" messages says you are coming from 192.168.56.1, which is should be where you are coming, but that it the address you are trying to ssh to. And then to top it off, you command line prompt has not changed.
So I'm wondering if 192.168.56.1 is the same system you are currently using, but just a different account on that system?
Is this true?
Also your prompt implies you were logged into the 'mininet' account when you issued the ssh -Y command to login to the 'mininet' account on 192.168.56.1.
Or is it possible that you are loosing track of which system and account you are current remotely logged into?

Direct Commands : ERROR: Can't open SubVI. (createNXT.vi)

Hi all,
I'm running LV 8.5 Student Edition - Toolkit 1 - patch 1.0.1 - FW 1.28
When using the Direct Commands I get a comile time error, ERROR: Can't open SubVI. (createNXT.vi).
Did a full reinstall of software toolkit patch and mass compile. still get error.
I explicitly named the directory path to the file (createNXT.vi). still get error.
I found that the file (createNXT.vi) is password protected, could this be the issue?
Any help with this problem would be great.
Cheers
Nick
Attachments:
DC_SensorVal_01.vi ‏16 KB

Hey Zach,
Thanks for your reply.
The error in question occurs when compiling to NXT.
Attached is a screenshot of the vi & error
Cheers
Nick
Attachments:
CreateNXT_Error_01.jpg ‏278 KB

Exceed : Error: Can't open display

Trying to install SAP with sapinst on AIX 6.1 , after launching exceed , and exporting the display variable , when try xclock , get the following error
ladksapdk33:/root # export DISPLAY=XXX.XX.XXX.XXX:2.0
adksapdk33:/root # xclock
Error: Can't open display: XXX.XX.XXX.XXX:2.0
Any one has any clue ? Please help

Abu Al MAmun wrote:
> ladksapdk33:/root # export DISPLAY=XXX.XX.XXX.XXX:2.0
> adksapdk33:/root # xclock
> Error: Can't open display: XXX.XX.XXX.XXX:2.0
Verify this IP
Thanks

Error : "Can't open boot_archive"

Similar Messages

Maybe you are looking for