Error: Cannot communicate with mainApp (getVersion)

                   Dear All,
I have error when login to IPS with the follwoing error:
Error: Cannot communicate with mainApp (getVersion). Please contact your system administrator.
Would you like to run cidDump?[no]:
My IPS detail:
Model: ASA-SSM-20
Sw Version: 7.1(6)E4
Rgrds
Sariah

i guess u need to reinstall the os of the ips i had the same problem ,... best of luck
                                                                                                     regards
                                                                                                     Shoaib ali

Similar Messages

  • Jabber is unable to register through expressway (Error:Cannot communicate with the server)

    Hello Experts !
                         I am getting below error while trying to login in jabber through expressway . Please help me to fix this issue
    Attached is the file .
    (Error:Cannot communicate with the server)
    Regards;
    KV

    Ok, let's clarify, what u have (correct me, where I am wrong):
    1. We assume,that outside server's config is okay (there are only collab_edge srv for outside domain);
    2. Traversal Zone is up (everything is okay with certs, IM&P nodes,CM are added);
    3. Both domains (inside/outisde) are created on E/C and properly configured;
    4.Inside DNS server has has srv records (cuplogin,cisco-uds) for both domains:outside,inside;
    If yes, then you need to reset jabber, make "ipconfig /flashdns" on client, flash dns on E/C.
    Start logging with packet captures and tries to login. After that, start checking from packet captures: client, E/C. Try to search for DNS lookups, if evry node tries to find appropriate server (client->E, C->IM&P) .
    Regards,
    Kirill

  • IDSM Error: Cannot communicate with system processes.

    Dear all,
    We have 6500 Switch which include IDS module.We are facing some different problem while accessing IDS Module. We can able to ping module but when we try to telnet which logout session before we can get in IDSM prompt.Is any one facing same problem .
    IDSM Error: Cannot communicate with system processes.
    Is it related to memory utilization.How can i get access to IDSM?This is working configuration.Access list is also define properly.
    TIA
    Regards
    SAM

    Which software version are you using?
    check this bug-id: CSCef12198.
    Try these links:
    http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/idsm/idsm_2/13074_04.htm#wp71383
    http://www.cisco.com/en/US/products/hw/modules/ps2706/prod_configuration_guide09186a00800f24fe.html

  • CanoScan LiDE 220 error Cannot communicate with scanner Error 2, 156,182

    A month ago I bought a scanner the "Canon CanoScan LiDE 220" .
    I get this scanner after a month of testing not stable / operational.
    I keep getting the following error message :
    and also the error 2, 156, 182
    Configuration:
    A. Mobo ASUS X99-A > with the latest Bios Level
    B. Windows 7 64-Bit
    C. When connected to a USB 2.0 or 3.0 does not matter.
    D. Scan Driver is the
    http://www.canon.nl/support/consumer_products/products/scanners/lide_series/canoscan_lide_220.aspx
    CanoScan LiDE 220 Scanner Driver v. 1.01 (Windows 8.1 / 8.1 x64 / 8/8 x64 / 7/7 x64 / Vista / Vista64 / XP)
    File version: 1:01
    Release date: April 24, 2015
    E. Quick Menu v 2.5.0 (Windows 8.1 / 8.1 x64 / 8/8 x64 / 7/7 x64 / Vista / Vista64 / XP) File version: . 2.5.0 " is used.
    Please help me, It's very frustrating when you buy new stuff and it all turns out not to work.
    Regards,
    Rob Blankestijn

    I am also getting a similar error, except mine is "Code:2,156,182"
    If anyone is also getting these errors or if someone on Canon tech support could rectify this, I would really appreciate it. 

  • Cannot communicate with the server. Verify your connection and try again.

    Hi,
    Recently I performed SharePoint 2010 upgrade to 2013 including Project Server 2010 to 2013.
    Error "Cannot communicate with the server.  Verify your connection and try again." shows when I access PWA over extranet, while its fine if I access from any system within local network.
    Any idea what can be the issue ?
    Regards,
    Mehar

    Hi,
    Have you configured SSL configuration NLB. If yes, please add SSL URL in Alternate Access Mapping which is being configured on NLB
    For instance. Add Https://servername instead of
    http://serverame

  • I am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???

    i am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???

    Welcome to the Apple Community.
    The following article(s) may help you.
    Photo Stream ToU's

  • Canoscan 88ooF error report, "Cannot communicate with scanner."

    When I try and use my scanner I get the error report,"Cannot communicate with scanner, check that it is plugged in and truned on." When I go to Windows device manager I can see it and when I click on the properties buttonn it says that the device is working properly. I have downloaded the latest driver software etc., and I have uninstalled everything and re installed again but I still get the same error report.
    I am using Windows 7, 64 bit version.
    Above is the error message I get.
    Solved!
    Go to Solution.

    After two days of fruitless effort I have found my own solution. I have downloaded and installed VueScan  x64 and it works a treat. I think the problem I have been having is due to the fact that the scanner driver is 64 bit and the programs that install are 32 bit and although scanner driver is working perfectly well the 2 bit probrams can't see it.

  • Error starting db via batch script: Cannot communicate with crsd

    Hi,
    I've installed Oracle 11g on a Windows 7 64 bit laptop, and I have no problems starting the database using Windows Services
    I tried starting the db using the batch command, but received the following error:
    C:\Users\Scott>C:\app\Scott\oracle\11.2.0\11gr2_home\BIN\srvctl.bat start database -d sw11g
    PRCD-1027 : Failed to retrieve database sw11g
    PRCR-1070 : Failed to check if resource ora.sw11g.db is registered
    Cannot communicate with crsd
    Have I missed a parameter?
    Cheers

    No, this is my laptop where I'm using the DB as an experimental tool etc.
    This was my attempt in placing a shortcut on my desktop for startup.

  • MG3250 Printer throws up error message - Scangear cannot communicate with scanner for these reasons

    Hi
    I have an MG 3250 printer running off an HP Pavilion Laptop using Windows 8.1. Every time I try to scan  I get an error message that 'cannot  communicate with scanner for these reasons...........etc'. The only way I can get the printer / scanner to work is by going through the Control Panel / Hardware & Printers route. This seems terribly slow and time consuming. What is wrong and what needs to be done to correct the problem?
    Thanks

    I have the exact same problem as you with my new Canon LiDE 120. The errors I get are: 2, 156, 182, 55 and sometimes 77 when using it on my Windows 8.1 (64 Bit) desktop PC. I have tried installing and uninstalling the drivers multiple times, used different ports and still nothing. It does however work properly on a Windows 7 device.
    My PC's specification is as follows:
    Windows 8.1 (64 Bit) - With latest updates
    Avast Premier
    Malwarebytes
    ASUS z87 Pro
    Intel 4770k
    ASUS GTX 670 (4GB)
    8GB 1600MHz Kingston RAM
    Things I have done
    Tried different ports (USB 2.0 and 3.0)
    Installed all software & driver from CD
    Installed all software & driver from Canon Website
    Installed only the latest driver from Canon Website (April 2015)
    Tried to use Windows Fax & Scan, Scan, IJ Scan Utility, Scangear and Vuescan.
    What happens
    The physical buttons on the device are unresponsive
    The computer says it is warming up, but nothing happens
    It starts to scan for a few seconds and then comes to an abrupt end - this can happen at 10% of the scan or even at 91%.
    Surely the problem cannot be with Windows 8.1 since the device was only released last year. What could be the issue? I called their support line and was advised to clear the drivers of previous scanners used by my system, I did this and there still is no change. Could somebody please help me! 

  • M1319F Scan error message " cannot communicate with the scanner"

    I have a HP M1319F which was able to print/scan/fax.  Recently the fax function has ceased. I have ordered a fax board which will hopefully resolve that problem.  Now it does not scan as well. I get the error message " cannot communicate with the scanner" . unistalled and resinstalled the software but to now avail

    I have a HP M1319F which was able to print/scan/fax.  Recently the fax function has ceased. I have ordered a fax board which will hopefully resolve that problem.  Now it does not scan as well. I get the error message " cannot communicate with the scanner" . unistalled and resinstalled the software but to now avail

  • Cannot communicate with system processes error

    Hello,
    It seems after S159 our IDS's started refusing any config updates/remote logins and returning "cannot communicate with system processes" shortly after login and then disconnecting the session. I see there are some patches available on TAC.
    I can't tell if the IDS has any of these patches or not. It reports 4.1-4 Should the IDS report a version with a letter of the patch if it has any installed. Also, does this problem sound like the out of memory bug I have seen mentioned before? The memory usage on the sensors reports 98%
    Any help is appreciated!

    The only indication of a patched sensor is the status list of components, like Analysis Engine. Instead of "(Release)" it will have the patch version.
    Yes, this could be the out of memory issue that can occur during a sigupdate.
    NOTE: the memory usage portion of show version in 4.x is incorrect because it does not take into account the OS cached memory that is available for use. It may show that most of the memory is used when actually there is plenty available.

  • Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help .  regards Cindy

    Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help .  regards Cindy

    Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
    Some basic printer troubleshooting steps before worrying about a printer driver:
    1. Have you tried turning the printer off and back on?
    2A. Is the printer attached with a cable?
         If yes, have you tried unplugging and re-plugging both ends of the printer cable?
         If that does not help, can you test the printer with another cable?
    2B. If your printer is not connected to the computer with a cable, have you tried restarting your printer (assuming wireless connection)?
         Have you tried restarting your wireless router?
    3. Have you tried restarting your MacBook? (Be sure to save your work first.)
    4. Does the printer have ink? (Doesn't usually generate a 'communications error' though)
    5. Have you updated OS X or the program you're trying to print from recently?

  • LDOM Issue on T2000   ldmd cannot communicate with the hypervisor as the re

    Hi,
    There were some issues with old primary LDOM at T2000 so I installed
    new o/s 64 bit on SUN SPARC T2000 and reset SC on factor-default and
    also installed LDOM 1.2 version. Seems like old hypervisor is not
    deleted.
    Now I am getting error.
    #ldm list
    Failed to connect to logical domain manager: Connection refused
    So far I have trying the following steps. but still no luck
    I installed version 1.2 LDOM. and also I updated SC. Plus I installed
    below patches:
    •118833-36, Kernel update patch
    •124921-02, which contains updates to the Logical Domains 1.0 drivers
    and utilities
    •125043-01, which contains updates to the qcn (console) drivers.
    SC> bootmode config="factory-default"
    SC> poweroff
    SC> resetsc -y
    SC> poweron
    Now I tried everything but still no luck
    Here are some errot which I am getting
    #Svcs -xv
    [ Oct  5 00:07:14 Method "start" exited with status 96 ]
    [ Oct  5 00:32:11 Leaving maintenance because disable requested. ]
    [ Oct  5 00:32:11 Disabled. ]
    [ Oct  5 00:32:21 Enabled. ]
    [ Oct  5 00:32:21 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
    Service LOG file Info:
    ldmd cannot communicate with the hypervisor as the required device
    does not exist:
    /devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
    Either this is not the control domain or the firmware does not support LDoms
    [ Oct  5 00:32:21 Method "start" exited with status 96 ]
    [ Oct  5 00:43:54 Leaving maintenance because disable requested. ]
    [ Oct  5 00:43:54 Disabled. ]
    [ Oct  5 00:45:19 Enabled. ]
    [ Oct  5 00:45:19 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
    ldmd cannot communicate with the hypervisor as the required device
    does not exist:
    /devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
    Either this is not the control domain or the firmware does not support LDoms
    [ Oct  5 00:45:19 Method "start" exited with status 96 ]
    [ Oct  5 00:45:19 Rereading configuration. ]
    bash-3.00# cd /opt/SUNWldm/bin/
    bash-3.00# ls
    ldm ldmconfig ldmd ldmd_start schemas
    bash-3.00# ./ldmd_start
    ldmd cannot communicate with the hypervisor as the required device
    does not exist:
    /devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
    Either this is not the control domain or the firmware does not support LDoms
    bash-3.00# ldm
    Failed to connect to logical domain manager: Connection refused
    bash-3.00# sc>
    sc> showhost
    Sun-Fire-T2000 System Firmware 6.7.12 2011/07/06 20:03
    Host flash versions:
    OBP 4.30.4.d 2011/07/06 14:29
    Hypervisor 1.7.3.c 2010/07/09 15:14
    POST 4.30.4.b 2010/07/09 14:24
    bash-3.00#
    bash-3.00# uname -a
    SunOS ldom-srv 5.10 Generic_118833-36 sun4v sparc SUNW,Sun-Fire-T200
    Thanks in advance

    Hi,
    There were some issues with old primary LDOM at T2000 so I installed
    new o/s 64 bit on SUN SPARC T2000 and reset SC on factor-default and
    also installed LDOM 1.2 version. Seems like old hypervisor is not
    deleted.
    Now I am getting error.
    #ldm list
    Failed to connect to logical domain manager: Connection refused
    So far I have trying the following steps. but still no luck
    I installed version 1.2 LDOM. and also I updated SC. Plus I installed
    below patches:
    •118833-36, Kernel update patch
    •124921-02, which contains updates to the Logical Domains 1.0 drivers
    and utilities
    •125043-01, which contains updates to the qcn (console) drivers.
    SC> bootmode config="factory-default"
    SC> poweroff
    SC> resetsc -y
    SC> poweron
    Now I tried everything but still no luck
    Here are some errot which I am getting
    #Svcs -xv
    [ Oct  5 00:07:14 Method "start" exited with status 96 ]
    [ Oct  5 00:32:11 Leaving maintenance because disable requested. ]
    [ Oct  5 00:32:11 Disabled. ]
    [ Oct  5 00:32:21 Enabled. ]
    [ Oct  5 00:32:21 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
    Service LOG file Info:
    ldmd cannot communicate with the hypervisor as the required device
    does not exist:
    /devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
    Either this is not the control domain or the firmware does not support LDoms
    [ Oct  5 00:32:21 Method "start" exited with status 96 ]
    [ Oct  5 00:43:54 Leaving maintenance because disable requested. ]
    [ Oct  5 00:43:54 Disabled. ]
    [ Oct  5 00:45:19 Enabled. ]
    [ Oct  5 00:45:19 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
    ldmd cannot communicate with the hypervisor as the required device
    does not exist:
    /devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
    Either this is not the control domain or the firmware does not support LDoms
    [ Oct  5 00:45:19 Method "start" exited with status 96 ]
    [ Oct  5 00:45:19 Rereading configuration. ]
    bash-3.00# cd /opt/SUNWldm/bin/
    bash-3.00# ls
    ldm ldmconfig ldmd ldmd_start schemas
    bash-3.00# ./ldmd_start
    ldmd cannot communicate with the hypervisor as the required device
    does not exist:
    /devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
    Either this is not the control domain or the firmware does not support LDoms
    bash-3.00# ldm
    Failed to connect to logical domain manager: Connection refused
    bash-3.00# sc>
    sc> showhost
    Sun-Fire-T2000 System Firmware 6.7.12 2011/07/06 20:03
    Host flash versions:
    OBP 4.30.4.d 2011/07/06 14:29
    Hypervisor 1.7.3.c 2010/07/09 15:14
    POST 4.30.4.b 2010/07/09 14:24
    bash-3.00#
    bash-3.00# uname -a
    SunOS ldom-srv 5.10 Generic_118833-36 sun4v sparc SUNW,Sun-Fire-T200
    Thanks in advance

  • Itunes cannot communicate with my iphone

    I installed an update and then I tried to restore and i received a message that my iphone (4s) cannot communicate with itunes. (on mac) Any suggestions?

    Hello there kellynocca,
    Given what you are describing I recommend starting here with the iOS: Troubleshooting USB connection article: http://support.apple.com/kb/ts1286.
    Once you determine that your computer has a USB 2.0 connection, use the following steps to troubleshoot the connection between the device and the computer. Test after each step:
    Update to the latest version of iTunes.
    Plug the device directly into a high-power USB 2.0 port on the computer. If possible, use a USB port on the back of the computer.Avoid plugging the device into a keyboard, display, or standalone hub. The USB ports on these accessories may be low-power or only offer USB 1.x connections.
    If you are using an accessory, remove the device from the dock and connect it to the computer using only the Apple USB to Dock Connector cable.If you have access to additional Apple USB to Dock Connector cables, try testing with another if the first one doesn't work.
    Restart your computer and device. To restart your device:Hold the power button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.
    Disconnect all USB devices from your computer, except for your keyboard and mouse. Then reconnect the iOS device. If the issue is resolved, reconnect other USB devices, testing after each connection.
    Another article describes what to do if you are using Windows and see an unknown error containing "0xE" when connecting your device.
    IF that does not get your device to communicate with iTunes correctly I recommend restarting both the computer and the iPhone.
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    As a last resort I would recommend backing up to iCloud, and restoring the device.
    iCloud: Backup and restore overview
    http://support.apple.com/kb/ht4859
    iOS: How to back up and restore your content
    http://support.apple.com/kb/ht1766
    Regards,
    Sterling

  • VIPCA and CRS-0184: Cannot communicate with CRS daemon

    I have some strange issue during Clusterware installation. I've installed software on 2 nodes, and have ran root.sh on both. On second node I've had problem with interfaces but it came through after using oifcfg for both public and private interface. Silent vipca executed by root.sh failed, but as it is said in docs it's ok. I need to run vipca on second node manually. But when I'm running it I'm receiving CRS-0184 Cannot communicate with CRS daemon. Daemons are running, there's no error running crs_start -all. I don't have any idea what can I do now.
    Clusterware 10.2.0.1
    SUSE Linux Enterprise Server 10 SP2

    10/26/2008 17:56:08
    ./ocrdump.bin
    [SYSTEM]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.interfaces]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_CREATE_SUB_KEY, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.interfaces.global]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.interfaces.global.eth0]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.interfaces.global.eth0.172|d16|d216|d0]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.interfaces.global.eth0.172|d16|d216|d0.1]
    ORATEXT : public
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.interfaces.global.eth0.172|d216|d16|d0]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.interfaces.global.eth0.172|d216|d16|d0.1]
    ORATEXT : public
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.interfaces.global.eth1]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.interfaces.global.eth1.192|d168|d0|d0]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.interfaces.global.eth1.192|d168|d0|d0.1]
    ORATEXT : cluster_interconnect
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.clustername]
    ORATEXT : crs
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.misscount]
    UB4 (10) : 60
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.diskfile]
    ORATEXT : /dev/raw/raw2
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.configured_node_map]
    BYTESTREAM (16) : 6
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_names]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_names.slesorange]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_names.slesorange.nodenum]
    UB4 (10) : 1
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_names.slesred]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_names.slesred.nodenum]
    UB4 (10) : 2
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node1]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node1.nodename]
    ORATEXT : slesorange
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node1.privatename]
    ORATEXT : slesorange-priv
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node1.hostname]
    ORATEXT : slesorange
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node1.nsendpoint]
    ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesorange-priv)(PORT=49895))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node2]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node2.nodename]
    ORATEXT : slesred
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node2.privatename]
    ORATEXT : slesred-priv
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node2.hostname]
    ORATEXT : slesred
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node2.nsendpoint]
    ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesred-priv)(PORT=49895))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.privatenames]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.privatenames.slesorange-priv]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.privatenames.slesorange-priv.nodenum]
    UB4 (10) : 1
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.privatenames.slesred-priv]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.privatenames.slesred-priv.nodenum]
    UB4 (10) : 2
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.hostnames]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.hostnames.slesorange]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.hostnames.slesorange.nodenum]
    UB4 (10) : 1
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.hostnames.slesred]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.hostnames.slesred.nodenum]
    UB4 (10) : 2
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.language]
    ORATEXT : AMERICAN_AMERICA.WE8ISO8859P1
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.version]
    UB4 (10) : 3
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.version.node_numbers]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.version.node_numbers.node1]
    ORATEXT : 10.2.0.1.0
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.version.node_numbers.node2]
    ORATEXT : 10.2.0.1.0
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.version.activeversion]
    ORATEXT : 10.2.0.1.0
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.versionstring]
    ORATEXT : 10G Release 2
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.ORA_CRS_HOME]
    ORATEXT : /u01/oracle/product/10.2.0/crs
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.local_only]
    ORATEXT : false
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.cevmkey]
    ORATEXT : 17536746
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.rmport]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.rmport.localhost]
    ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=49897))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.rmport.slesorange]
    ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesorange-priv)(PORT=49897))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.rmport.slesred]
    ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesred-priv)(PORT=49897))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.cevmport]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.cevmport.slesorange]
    ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesorange-priv)(PORT=49898))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.cevmport.slesred]
    ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesred-priv)(PORT=49898))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.acceptor]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.acceptor.slesorange]
    ORATEXT : (ADDRESS=(PROTOCOL=ipc)(KEY=Aslesorange_crs_evm))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.acceptor.slesred]
    ORATEXT : (ADDRESS=(PROTOCOL=ipc)(KEY=Aslesred_crs_evm))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.cevmipc]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.cevmipc.slesorange]
    ORATEXT : (ADDRESS=(PROTOCOL=ipc)(KEY=Cslesorange_crs_evm))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.cevmipc.slesred]
    ORATEXT : (ADDRESS=(PROTOCOL=ipc)(KEY=Cslesred_crs_evm))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs.usersecurity]
    ORATEXT : 1
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs.deny]
    ORATEXT :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs.user_default_dir]
    ORATEXT : /u01/oracle/product/10.2.0/crs/crs/public
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs.e2eport]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs.e2eport.slesorange]
    ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesorange-priv)(PORT=49896))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs.e2eport.slesred]
    ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesred-priv)(PORT=49896))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs.uiport]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs.uiport.slesorange]
    ORATEXT : (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs.uiport.slesred]
    ORATEXT : (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.0]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.0.NODENAME]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.0.TIMESTAMP]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.0.LOC]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.1]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.1.NODENAME]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.1.TIMESTAMP]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.1.LOC]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.2]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.2.NODENAME]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.2.TIMESTAMP]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.2.LOC]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.DAY]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.DAY.NODENAME]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.DAY.TIMESTAMP]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.DAY.LOC]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.DAY_]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.DAY_.NODENAME]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.DAY_.TIMESTAMP]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.DAY_.LOC]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.WEEK]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.WEEK.NODENAME]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.WEEK.TIMESTAMP]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.WEEK.LOC]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.WEEK_]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.WEEK_.NODENAME]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.WEEK_.TIMESTAMP]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.WEEK_.LOC]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [DATABASE]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_CREATE_SUB_KEY, OTHER_PERMISSION : PROCR_CREATE_SUB_KEY, USER_NAME : root, GROUP_NAME : root}
    [DATABASE.NODEAPPS]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_CREATE_SUB_KEY, GROUP_PERMISSION : PROCR_CREATE_SUB_KEY, OTHER_PERMISSION : PROCR_CREATE_SUB_KEY, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.VIP_RANGE]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_CREATE_SUB_KEY, GROUP_PERMISSION : PROCR_CREATE_SUB_KEY, OTHER_PERMISSION : PROCR_CREATE_SUB_KEY, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.LOG]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_ALL_ACCESS, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.ASM]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_CREATE_SUB_KEY, GROUP_PERMISSION : PROCR_CREATE_SUB_KEY, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.DATABASES]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_CREATE_SUB_KEY, GROUP_PERMISSION : PROCR_CREATE_SUB_KEY, OTHER_PERMISSION : PROCR_CREATE_SUB_KEY, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.ONS_HOSTS]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.ONS_HOSTS.slesorange]
    ORATEXT : slesorange
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.ONS_HOSTS.slesorange.PORT]
    ORATEXT : 6200
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.ONS_HOSTS.slesred]
    ORATEXT : slesred
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.ONS_HOSTS.slesred.PORT]
    ORATEXT : 6200
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [CRS]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}

Maybe you are looking for

  • Using UNUSABLE on Unique Index gives "initially in unusable state" error

    I am doing the following: 1. Truncate table 2 Alter PK Index Disable 2. Alter Unique Index Unusable 3. Insert /*+ APPEND NOLOGGING*/ into my table My problem is, I get an "ORA-26026: unique index ... initially in unusable state" error when I try to d

  • Captured video is stretched too wide

    I connect my camcorder to my Mac with a Firewire cable and capture video but the result is stretched too much. Instead of widescreen (16:9) it is more like 19.5 to 9! I am new to Mac, I have a new Macbook Pro and am still learning.  The camcorder is

  • Accessing a component property

    How can a access a component property defined in the portal.xml file simulair to this <property name="plainDescription" value="Number of messages"/> I use a JSPDynPage. what I realy want is this.       <env-entry>           <env-entry-name>CONFIGURAT

  • Call Library Node

    Hi, I have experienced some problem (refer to my attachment) in running my LabVIEW program as an EXE file. However, such error did not appear when the program in running as llb format. I suspect it has something to do with the configuration of the Ca

  • Regarding creating questionnaire in Work Area

    Hello, I have created question catalog & catalog group. When I tried to save the catalog entries it is not happening. Pleass suggest. Regards Gayathri B R