Error: Cannot connect to NTP server or NTP server is not running - Cisco IPS
This is different scenario here:
I have two Cisco IPS 4260-k9 and both are in production now.
One of the IPSs is configured with NTP and works fines, but another one is not.
When tried to configure when the device is ON and live in production and got the following error,
Error from CLI:
" Error: Cannot connect to NTP server or NTP server is not running "
Error from IME:
" Delivery failed.
err Unaccepable Value - cannot connect to the NTP server or NTP server is not running"
I am able to reach the NTP server, also the same NTP is working fine with other devices....
Am I doing anything wrong?
Please advise
Hi,
Now the error has changed:
Session.connect: java.net.SocketTimeoutException: Read timed out
I have increased the pooling interval to 1 Hr from 1 Min. Waiting for the next pooling interval result.
Guide me if I am heading right.... or anything else needs to be done.
Regards,
Krishna Chauhan
Similar Messages
-
Hi,
EPM version: EPM 11.1.2.1
When we are using Zoom In Level as All Levels and tring to drill down for dimention of HFM application we are getting below error.
Error: "Cannot connect to the provider. Make sure it is running in the specified host/port. Error (12031)"
As we found some solution from comunity , we have performed below workaround but still we are getting same error.
· We have done the changes in mod_wl_ohs.conf file of OHS with (WLIOTimeoutSecs 3600 and WLIOSocketTimeoutSecs 3600)
· And then restarted OHS and APS service but still we found same error.
Could anyone please suggest ,where can we trace its log from web server and the solution for this issue?
Thanks,
D.N. RanaHi,
We have already performed the changes for APS in OHS as mentioned in the solution and the path also same as under OHS.
Intially we were getting error for "to increase netRetryCould and NetRetryInterval" as a solution we have added below 3 registry DWORD keys under path
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
"KeepAliveTimeout"=dword:00180000 (26 Minutes)
"ReceiveTimeout"=dword:00dbba00 (240 Minutes)
"ServerInfoTimeout"=dword:00180000 (26 Minutes)
Above error resolved but then we received Error"12031"
Now we have added above 3 DWORD keys under path HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
and now we are not getting the error "12031".
But here we are not getting how it(LB issue) resolved with above solution?
Thanks,
D.N.Rana -
Hi All
Our user are getting below error when they try to connect from SmartView
Cannot Connect to the Provider. Make Sure It Is Running in the Specified Host/Port.Error(12031).
We are on 9.3.3 planning.our web server is WebSphere
Please suggest
Thanks,You might want to increase the timeout and check:
Smartview in Excel utilizes some Microsoft settings that it obtains From IE. When running on IE 7 or higher there are new settings that have a low default time out. You can increase these by following the instructions in the articles listed below
http://support.microsoft.com/kb/813827
http://support.microsoft.com/kb/181050
Make sure you have a safe backup of the windows registry before you do this .
1. Open the Registry (Start -> Run -> Regedit)
2. Locate the following section:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\
3. Create the following new keys for DWORD with Hexadecimal values:
ReceiveTimeout and set it to 00dbba00
KeepAliveTimeout and set it to 00180000
ServerInfoTimeout and set it to 00180000
4.Disconnect and close the Smartview and launch a fresh connection
HTH-
Jasmine. -
Error : Cannot connect to the LDAP server
I have exported a file called "test1.ldif"
and then import in a new Oracle ldap server using the command:
ldapadd -p 389 -D cn="directory manager" -w <password> -f test1.ldif
But there is error "Cannot connect to the LDAP server".
Actually, I'm migrating the ldap data from 1 machine to another, please advise. ThanksCheck your ldap port, by default it is 4032...
--Bill -
Error cannot connect to server or DNS name when working with the SRDemo
I receive the error cannot connect to server or Dns name when trying to
display the SRlist.jspx page in the SRDemo. I am using the embedded OC4J server . I tried to using the debugger to trouble shoot the problem but I did not get any information that was useful. The url I am using is http://localhost:8989/SRDemo-UserInterface-context-root/faces/app/SRlist.jspx I also tried using the IP address that didn't work . I really need to get through this demo.What about using:
http://127.0.0.1:8989/SRDemo-UserInterface-context-root/faces/app/SRlist.jspx
Or disabling any proxy settings your browser might have? -
Error : Cannot connect to the server temporarily
Hi,
A particular PC is giving an error " cannot connect to the server temporarily", the user is able to login on another PC and no one is able to login to lync 2010 ( internal user ) on this particular PC.
Options tried:
1) Deleted sip folder under app data.
2) Uninstall and reinstall Lync client.
3) checked timezone and srv records.
4) checked ping to FE and director server.
) checked manually adding FE on lync client.
Your inputs/suggestions would of great help.
Thanks.Is the computer join the domain?
Run the following command to check the automatic configuration is working
Nslookup
>set type=srv
>_sipinternaltls._tcp.<sip domain>.com(for internal user)
>_sip._tls<sip domain>.com(for external user)
If you can ping to FE, please try to sign in with manual configuration.
Lisa Zheng
TechNet Community Support -
" ERROR cannot connect to server. please try again later" for games
my phone keeps coming up with the phrase " ERROR cannot connect to server. please try again later" for games but some of my games are working and game centre loads . what's the deal?? how do you fix it ?
for the amount of money I pay a month (£80) you'd expect it to work.... afterall it is apparently a "smart" phoneThanks for the reply. Tried that of course before going to the effort of posting something here.
Cheers
G -
Logon balancing error:cannot connect to message server (rc=9)
Hi Gurus,
I have just installed SAP GUI 710 in my new system and copied the saplogon.ini file to the respective folder in the new system.
I am now able to see the servers in the logon pad but not able to login .
When i try clicking the logon i am getting the below error message "
"Logon balancing error:cannot connect to message server (rc=9)"
Then further expanding the message i am getting the below message
" Error: Server '?' unknown
Tue Mar 02 11:51:05 2010
Release 710
Component NI (Network Interface), Version 39 rc =-3 , Detail NiErrSet. "
Can you please help me out in accessing the servers.
Regards
VikramCheck OSS Note : 882741
Summary
Symptom
Some users cannot longer connect SAP GUI to any SAP systems e.g. via SAP Logon, SAPShortcut etc. although they have not made any update to either SAP GUI or SAP system. The attempt to connect to the SAP system ends with error messages like this: "Logon balancing error: could not connect to message server (rc=9)", "service sapmsXXX unknown" or "service sapdp## unknown".
The detailed error information is as follows:
Error: service 'sap...' unknown
Component NI (network interface), ...
rc = -3, module ninti.c, line 463
Detail NiPGetServByName: service 'sap...' not found
System Call getservbyname
Other terms
service sapmsXXX unknown,logon balancing,service sapdp## not found error,etc/services,drivers\etc\services,getservbyname, sapdpxx
MSN Messenger 7.5,Connection Troubleshooter
Reason and Prerequisites
The reason for this malfunction is, that the datatype of the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
was changed from REG_EXPAND_SZ to REG_SZ.
The following programs are currently known to cause this registry change:
Starting MSN Messenger 7.5 "Connection Troubleshooter" (Build 7.5.0299).
Installation of MSN Messenger 7.0 or MSN Messenger 7.5 with the option automatic scanning and configuration of ports.
This modification prevents the expansion of environment variables in the value of the parameter. Therefore,
%SystemRoot%\system32\drivers\etc
is not translated to
c:\windows\system32\drivers\etc
and the services database is not found by the API function getservbyname().
If you have checked the datatype of registry value DatabasePath and it is REG_EXPAND_SZ, apply SAP Note 52959 to check the appropriate settings in the services file.
Solution
Start the registry editor and rename the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
Create an Expandable-String Value (REG_EXPAND_SZ) with the same name and value.
If more PCs are affected, you can export the correct value to a .reg file and import the .reg to other PCs.
If you have the same problem although you have not installed Microsoft MSN Messenger 7.5, create a customer message, collect the following information and attach it to the message according to note 541726 or upload it to sapservX (see note 40024):
Scan your workstations for spyware and viruses with up-to-date virus definitions. If you already did that what was the result ?
What software has been installed recently ? (client software, Firewall)
Create a registry export of the following key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstallon the affected and the unaffected PC respectively and attach the two .reg files to the customer message.
Are the users on the affected workstations logged on with administrative credentials (local administrator ) ?
Create an MPS Report Networking and Setup Perf of an affected workstation so that we can check if they use an software in common.
You can download the Networking MPS Reporting Tool at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network.exe
You can find a short description about the features of the tool at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network_Readme.txt
The Setup Perf MPS Reporting Tool is located at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_SETUPPerf.EXE
Run this report too on identically configured workstations, which are not affected.
If you have already changed back the DatabasePath parameter and if after a while the value was switched back to REG_SZ perform the following steps to help us to identify the reason for this problem:
Switch the datatype back to REG_EXPAND_SZ
Download Regmon from http://www.sysinternals.com on the affected machines
Enable auditing on the affected clients
Modify the settings of the eventlog so that no important entry is deleted!
Open Regedit and highlight HKLM\System\CCS\Services\TCPIP\Parameters
Right-click on "Parameters" and choos "Permissions" and click "Advanced".
Choose "Auditing" and "Add".
Add "Everyone" and select "this key only" under "Apply onto".
Check the boxes "Set Value" and "Delete" and click "OK".
Apply these settings
Start Regmon and apply the correct filter settings:
Press the "magnifying glass" button to stop the monitoring.
Press the rubber button to delete all logged entries.
Go to "Options Filter/Highlight".
Copy the following value to the include field: tcpip\parameters\databasepath and click "Apply".
Start Regmon by pressing the magnifying glass button
Verify that logging starts when you double-click the TCPIP Key in regedit!
If the datatype will be changed again, provide us the output of the monitoring tools.
Solution provided by Microsoft
This issue is said to be fixed as of build 7.5.0311 of MSN messenger. -
Error: Cannot connect to SFTP server ; channel is not opened
Hi PI Gurus,
Sender SFTP CC is getting error:
Error: Cannot connect to SFTP server. channel is not opened. (Software version: 3.0.23)
Can anyone guide me, what this error means 'channel is not opened'
Is the issue is at SFTP server location?
Regards,
Krishna ChauhanHi,
Now the error has changed:
Session.connect: java.net.SocketTimeoutException: Read timed out
I have increased the pooling interval to 1 Hr from 1 Min. Waiting for the next pooling interval result.
Guide me if I am heading right.... or anything else needs to be done.
Regards,
Krishna Chauhan -
Error: Cannot connect to fulfillment server. Error: cannot find loan record. Definitely connected to internet, authorization correct, etc. Not sure what else to look at.
Is the computer join the domain?
Run the following command to check the automatic configuration is working
Nslookup
>set type=srv
>_sipinternaltls._tcp.<sip domain>.com(for internal user)
>_sip._tls<sip domain>.com(for external user)
If you can ping to FE, please try to sign in with manual configuration.
Lisa Zheng
TechNet Community Support -
Connection Error, cannot connect to game server
I Just updated to iOS 8.1. When I tried to play WordRoll I got an error message, Connection Error, Cannot connect to game server.
ave researched some answers and have tried several, log out then soft reset, delete app and reinstall, reset wireless, nothing seems to work.I'm not sure. Prior to last Wendesday our net connection was fine, but from Wednesday evening it's been decidedly flakey during the evenings
Oh & I'm using a HH2 & am on Total Broadband option 3. I've also tried the Leatrix Latency Fix (several months ago) & have turned off the router for several mins (on Thursday evening). I've been able to connect again to the servers this morning (as I did yesterday morning). Here's the pathping (sorry for it being an image, I can't work out how to copy & paste from the dos box & don't really want to copy it out), my HH's saying I'm getting 7,616kps down & 448 kps up, Speedtest.net's saying 6.34Mb/s down & 0.38Mb/s up (now). -
Can't start server -- Fatal error: Cannot connect to user group ldap server
After installing iCS 2.1, iCS 2.1p1, and iCS 2.1p3, a user will receive the
following error message when trying to start the server:
<P>
Fatal error: Cannot connect to user group ldap server.
<P>
In addition, the Directory Server access logs will contain the following
entry:
<P>
-0400] conn=125 op=1 SRCH base="dc=ldgw-llc,dc=com" scope=2
filter="(objectclass=People)"
In the server.conf file,
check the local.enduseradmindn
parameter. The parameter
should appear as follows:
<P>
uid=admin,ou=Administrators,ou=TopologyManagement,o=NetscapeRoot
<P>
If the parameter contains
"calmaster" or any user
other than "admin,"
change it to match the line above.Hi,
I am getting the same error, kindly let me know how did you solved this problem
Thanks
Ahmad -
Error: Cannot connect to Repository !!!
Hi all,
We are running PI 7.0 SP14 on a dual stack (ABAP & Java). It was a fresh install on a brand new laptop. We followed all the configuration and installation wizards. When we go to the Integration Directory with PISUPER and click on "Configuration Wizard" under Tools, we receive the error "Cannot connect to Repository" with the following:
#17 19:13:09 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.utilxi.misc.api.BaseRuntimeException
com.sap.aii.utilxi.misc.api.BaseRuntimeException: Cannot connect to Repository
at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.checkRepository(WizardContext.java:65)
at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.init(WizardContext.java:75)
at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.setWizard(WizardContext.java:260)
at com.sap.aii.ibdir.gui.scenario.wizard.ConfigurationWizardCommand.execute(ConfigurationWizardCommand.java:57)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#16 19:13:09 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.utilxi.misc.api.BaseRuntimeException: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Cannot connect to Repository
at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.checkRepository(WizardContext.java:65)
at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.init(WizardContext.java:75)
at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.setWizard(WizardContext.java:260)
at com.sap.aii.ibdir.gui.scenario.wizard.ConfigurationWizardCommand.execute(ConfigurationWizardCommand.java:57)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#15 19:13:09 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.utilxi.misc.api.BaseRuntimeException: Cannot connect to Repository
#14 19:13:09 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.utilxi.misc.api.BaseRuntimeException: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Not found in adapter metadata for XI adapter; check whether SAP BASIS content for your release has been imported correctly
at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.checkRepository(WizardContext.java:62)
at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.init(WizardContext.java:75)
at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.setWizard(WizardContext.java:260)
at com.sap.aii.ibdir.gui.scenario.wizard.ConfigurationWizardCommand.execute(ConfigurationWizardCommand.java:57)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#13 19:13:09 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.utilxi.misc.api.BaseRuntimeException: Not found in adapter metadata for XI adapter; check whether SAP BASIS content for your release has been imported correctly
#12 16:57:02 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.utilxi.misc.api.BaseRuntimeException
com.sap.aii.utilxi.misc.api.BaseRuntimeException: Cannot connect to Repository
at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.checkRepository(WizardContext.java:65)
at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.init(WizardContext.java:75)
at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.setWizard(WizardContext.java:260)
at com.sap.aii.ibdir.gui.scenario.wizard.ConfigurationWizardCommand.execute(ConfigurationWizardCommand.java:57)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#11 16:57:02 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.utilxi.misc.api.BaseRuntimeException: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Cannot connect to Repository
at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.checkRepository(WizardContext.java:65)
at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.init(WizardContext.java:75)
at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.setWizard(WizardContext.java:260)
at com.sap.aii.ibdir.gui.scenario.wizard.ConfigurationWizardCommand.execute(ConfigurationWizardCommand.java:57)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#10 16:57:02 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.utilxi.misc.api.BaseRuntimeException: Cannot connect to Repository
#9 16:57:02 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.utilxi.misc.api.BaseRuntimeException: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Not found in adapter metadata for XI adapter; check whether SAP BASIS content for your release has been imported correctly
at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.checkRepository(WizardContext.java:62)
at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.init(WizardContext.java:75)
at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.setWizard(WizardContext.java:260)
at com.sap.aii.ibdir.gui.scenario.wizard.ConfigurationWizardCommand.execute(ConfigurationWizardCommand.java:57)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#8 16:57:02 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.utilxi.misc.api.BaseRuntimeException: Not found in adapter metadata for XI adapter; check whether SAP BASIS content for your release has been imported correctly
#7 16:56:49 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "ConfAsstntHelp" is not registered in the service class Type Service - Type Information
at com.sap.aii.ib.core.service.ServiceBase.getServiceImpl(ServiceBase.java:71)
at com.sap.aii.ib.bom.gen.TypeServiceImpl.getTypeInformation(TypeServiceImpl.java:82)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.getTypeInfo(InternalXiItemService.java:23)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.createEmptyXiItem(InternalXiItemService.java:92)
at com.sap.aii.ib.gui.xiitem.services.XiItemServiceProvider.createEmptyXiItem(XiItemServiceProvider.java:97)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemServiceBase.<init>(InternalXiItemServiceBase.java:38)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemServiceBase.<init>(InternalXiItemServiceBase.java:25)
at com.sap.aii.ibdir.gui.xiitem.DirInternalXiItemService$ForConfAssistantHelp.<init>(DirInternalXiItemService.java:607)
at com.sap.aii.ibdir.gui.applcomp.StartupCodeEntry.localStartup(StartupCodeEntry.java:145)
at com.sap.aii.ibdir.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:101)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:429)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#6 16:56:49 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "ConfAsstntHelp" is not registered in the service class Type Service - Type Information
#5 16:56:49 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "TypeGroupFolder" is not registered in the service class Type Service - Type Information
at com.sap.aii.ib.core.service.ServiceBase.getServiceImpl(ServiceBase.java:71)
at com.sap.aii.ib.bom.gen.TypeServiceImpl.getTypeInformation(TypeServiceImpl.java:82)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.getTypeInfo(InternalXiItemService.java:23)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.createEmptyXiItem(InternalXiItemService.java:92)
at com.sap.aii.ib.gui.xiitem.services.XiItemServiceProvider.createEmptyXiItem(XiItemServiceProvider.java:97)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemServiceBase.<init>(InternalXiItemServiceBase.java:38)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemServiceBase.<init>(InternalXiItemServiceBase.java:25)
at com.sap.aii.ibdir.gui.xiitem.DirInternalXiItemService$ForFolder.<init>(DirInternalXiItemService.java:752)
at com.sap.aii.ibdir.gui.applcomp.StartupCodeEntry.localStartup(StartupCodeEntry.java:139)
at com.sap.aii.ibdir.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:101)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:429)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#4 16:56:49 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "TypeGroupFolder" is not registered in the service class Type Service - Type Information
#3 16:56:49 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "TypeConntestObj" is not registered in the service class Type Service - Type Information
at com.sap.aii.ib.core.service.ServiceBase.getServiceImpl(ServiceBase.java:71)
at com.sap.aii.ib.bom.gen.TypeServiceImpl.getTypeInformation(TypeServiceImpl.java:82)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.getTypeInfo(InternalXiItemService.java:23)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.createEmptyXiItem(InternalXiItemService.java:92)
at com.sap.aii.ib.gui.xiitem.services.XiItemServiceProvider.createEmptyXiItem(XiItemServiceProvider.java:97)
at com.sap.aii.ib.gui.xiitem.InternalXiItemServiceForNameNamespaceObjects.addType(InternalXiItemServiceForNameNamespaceObjects.java:68)
at com.sap.aii.ib.gui.xiitem.InternalXiItemServiceForNameNamespaceObjects.<init>(InternalXiItemServiceForNameNamespaceObjects.java:55)
at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.guiStartup(StartupCodeEntry.java:154)
at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:111)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
at com.sap.aii.ibdir.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:80)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:429)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#2 16:56:49 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "TypeConntestObj" is not registered in the service class Type Service - Type Information
#1 16:56:49 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "versConflList" is not registered in the service class Type Service - Type Information
at com.sap.aii.ib.core.service.ServiceBase.getServiceImpl(ServiceBase.java:71)
at com.sap.aii.ib.bom.gen.TypeServiceImpl.getTypeInformation(TypeServiceImpl.java:82)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.getTypeInfo(InternalXiItemService.java:23)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemServiceBase.<init>(InternalXiItemServiceBase.java:44)
at com.sap.aii.ib.gui.xiitem.CommonInternalXiItemService$ForVersionConflictList.<init>(CommonInternalXiItemService.java:326)
at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.guiStartup(StartupCodeEntry.java:150)
at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:111)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
at com.sap.aii.ibdir.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:80)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:429)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#0 16:56:49 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "versConflList" is not registered in the service class Type Service - Type Information
Has anyone seen this error or know how to resolve this?
Thanks!
Daniel
Edited by: Daniel Lee on Dec 11, 2008 5:39 PMHi,
is your server newly installed? or was there any upgradation done to it? from the error details that you have posted your error is with the import of Basis components for adapters
Not found in adapter metadata for XI adapter; check whether SAP BASIS content for your release has been imported correctly.
Please ask your Basis team to check whether the import was successful or not....if not then ask them to reperform the action.
Regards,
Abhishek. -
Cannot connect to database master at SQL server at SERVERNAME
I have installed SQL 2008 R2 in a fresh win 2008 R2. I’m running the sharepoint configuration Wizard using the database server name with the correct domain
credentials but I get the following error message. “Cannot connect to database master at SQL server at
SERVERNAME. The database might not exist, or the current user does not have permission to connect”
I‘m able to login to the new SQL server using the “SQL server management studio” with no problems. I used the sa account and a domain account.
The sharepoint server is also a new installation. And both servers have the firewall disabled.
Thanks in advance for your help.
SimonHi,
What is your SharePoint server’s version?
Please make sure you use the farm admin account to launch SharePoint configuration wizard. If not, please log in with this account, then check the effect.
In addition, check if you create a named instance, such as, servername\sharepoint, however, you only specify the servername in the configuration wizard. If this is
the case, change to servername\sharepoint, then check the effect.
Thanks,
Rock Wang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Regards, Rock Wang Microsoft Online Community Support -
Hi all,
In advance i`m thankful for your help,
I come across a problem while migrating the Active Directory from Windows Server 2003 to Windows Server 2008 R2,
SharePoint 2010 is getting this error Cannot connect to the configuration database. The same goes for the Administrative page,
Nothing is change in the MySql database, same log in, same server name, i guess it have something to do with the SharePoint Farm,
My question is will reinstalling the SharePoint do the job? Or is there an easy way to get back on my old track?
I`ve try to sync users... no good
PS C:\Users\administrator.SERVERM> if($configManager.IsSynchronizationRunning()
-eq $false)
>> {
>> $configManager.StartSynchronization($true)
>> Write-Host "Started Synchronizing"
>> }
>> else
>> {
>> Write-Host "Already Synchronizing"
>> }
>>
Can someone explain a little bit more about this:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)
Aleksandar Delcevski, Web-administrator School of Journalism and Public Relations Jurij Gagarin 17-1/1, 1000 Skopje, R. Macedonia t: + 389 2 3090 004 mob: +38972 257 565 [email protected]; www.vs.edu.mk; www.medium.edu.mk; www.unescochair-vs.edu.mkHiya,
I don't think it is necessary to reinstall.
You should just confirm that your basic infrastructure is working.
1: On the SharePoint server, open cmd and write ping <SQL server name>
2: On the SharePoint server, open cmd and write nslookup <SQL server name>
Basically the steps outlined here, is the best way to start:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)
Maybe you are looking for
-
How do I upload my mp3 files to the iTunes store?
I've been recording mp3 files and copying them to my iMac, and I would like to know how to sell them on iTunes.
-
Problem with Temporary Tablespace in 8i
Hello friends, I have the 8.1.7.4 version, with a 18GB Temporary Tablespace. An external process (from Datawarehouse tool) is making a query over a 10.000.000 records. It appeared the error: SQL error 1652 occurred when accessing table XXX It's suppo
-
Reading the Installation directory from Registry
Dear All, Wondering if it is possible somehow to read a path from system register and use that path as an installation (destination) directory for the application ? This should happen programmatically every time when the user starts the installation
-
i just restored my ipad as it was lagging very much. but after the restore i found that my ipad which was 16gb and was showing 13.5gb have decreased to 11.8gb why this same thing happend with my friends iphone it was 8gb showing 6 to7 gb but it turne
-
Applets are not loading.
Hey I am about 3/4 through the book Teach yourself java in 24 hours...and so far every applet I have done has not loaded in the browser but stayed the gray box of doom... bla bla not found. I am using Jcreater as a compiler and have the newest runtim