Error! cannot enable extended adj rogue

I need a little help.
When enabling Adjacent Channel Rogue (Management>Trap Controls>Security), I get the following error:
Error! cannot enable extended adj rogue.
Why do I get this error?
Reading the WLC help pages, I did not see any documentation on this error nor enabling Adjacent Channel Rogue.
Searching the Cisco Wireless LAN Controller Configuration Guide, Release 7.4, I did read any documentation on this error nor enabling Adjacent Channel Rogue.

I never use it, but it probably give you an error because you are not either using monitor mode APs or RLDP enabled. You don't want to enable RLDP either just to let you know. Here is more info on rogue detection and does explain the caveats to using RLDP.
http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080b40901.shtml
Sent from Cisco Technical Support iPhone App

Similar Messages

ERROR: The network you selected cannot be extended

I just bought a new Airport Extreme duel-mode router, and I want to use it to extend my network. I go to the wireless settings, and choose to "Extend A Network" then I choose the network that I want to extend. The problem is that when I selected the network I get an error "The Network You Chose Cannot Be Extended." There are some other networks (open and closed) around me, so I tried to extend one of those and I got the same error every time. The part that is really odd to me is that I already have a airport express extending that same network without any problem. Any Ideas?

So there is no way of using the new Airport Extreme on a wireless network unless that network was created by another Airport Extreme? My goal here is just to use the Airport Extreme with my external HD to backup my laptops using Time Machine. For this to be effective the Airport Extreme needs to be on the same network through which I get internet... or else it is pointless (I would have to switch to an internet-less network to do the backups) Is there any way I can do this?

Error: Cannot extend package

Hi All,
I created a package with SE80 and tried to save 'Z' prgram in it but it gave an error Cannot extend package <PACKAGE NAME>..
Can anyone please help me out on this.

HI as Sandra suggested, this question could easily be found.
[Cannot Extend Package;

P1102w cannot enable "HP WEB SERVICES" for sprintConnection error" check

I have a new printer which works fine for wifi printing but I'd like to use web printing which I beleive is called eprint.
I printed the configuration page and my firmware is 20120814
I cannot see were my printers email address is.
I navigated to the printers url and clicked on the tab "hp web services" and clicked on the green button enable but I keep getting the following error message.
"connection error: check internet connection"
From the router I can see that both the laptop and printer are on the same network 192.168.0.??
Can you please advise I suspect I have a fault on the printer but cannot be certain what can I do, I have updated the software on my mac which is running mavericks 10.9.2 , I've even hit the update software and there is no further updates available whch should mean I have the latest software and firmware for the printer.
Please advise how I may overcome the error when there clearly is no network issue as I can get to the printer to print and go to its web pages without any issues at all?

Hi paz_egap,
Thank you for the thorough response, I appreciate it.
Since you have set a static ip with manual DNS servers and you are still cannot enabled the web services is the firmware up-to-date on the printer. Please follow the steps in Getting the Firmware and Product Updates. Once the firmware is current and the printer still has its manual ip address and manual DNS servers you should be okay to enabled the web services on the printer.
If you are still having an issue after completing the above please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HT1349 Cannot enable my sharing function. Error 5506

Cannot enable home sharing function. Used to work fine, now it does not. No changes have been made recently that might have caused this that I'm aware of. I have rebooted the computer, rebooted the network router, reset my Apple ID and password and turned Itunes off and on multiple times. I am trying to connect to my Apple TV. I am now getting an Error 5506 message. Any ideas?

You mean services.msc, and I cannot start this service, I have tried per above and failed. SSPD and UPNP start with out a hitch, however I get the error from event log with windows media sharing service:
Service 'WMPNetworkSvc' did not start correctly because QueryService encountered error '0x80070002'. In Windows Media Player, turn off media sharing, and then turn it back on.
Scouring the internet did not find much nor Technet... I used to be able to see network devices for sharing at one time... this has disappeared during one of the windows updates... I dont know when as I just hooked back up the 360. Any help on this would be appreciated. More info below:
Frendly view:
System
Provider
[ Name]
Microsoft-Windows-WMPNSS-Service
[ Guid]
{6A2DC7C1-930A-4FB5-BB44-80B30AEBED6C}
[ EventSourceName]
WMPNetworkSvc
EventID
14325
[ Qualifiers]
49165
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2008-12-21T00:15:47.000Z
EventRecordID
75284
Correlation
Execution
[ ProcessID]
0
[ ThreadID]
0
Channel
System
Computer
stormrunner-V
Security
EventData
ServiceName
WMPNetworkSvc
ErrorCode
0x80070002

Gettin error Cannot convert to number in RTF Template

Hi,
I am working on xml template development i am getting the followinf error
Font Dir: C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
RTFProcessor setLocale: en-us
FOProcessor setData: D:\Tickets\Remittance Advice XMLP\canada_report1.xml
FOProcessor setLocale: en-us
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:586)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:383)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:201)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:161)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1015)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:968)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:209)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1561)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:951)
     at RTF2PDF.runRTFto(RTF2PDF.java:626)
     at RTF2PDF.runXDO(RTF2PDF.java:460)
     at RTF2PDF.main(RTF2PDF.java:251)
Caused by: oracle.xdo.parser.v2.XPathException: Cannot convert to number.
     at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1526)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:517)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:485)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:264)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:150)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:187)
     ... 16 more
I have checked the code and problem was due to following code i dont know where i went wrong
<xsl:variable xdofo:ctx="incontext" name="inner_group" select=".//G_SEL_INV_DATA"/><?for-each:$inner_group?><?if:(position()-1) mod $no_of_lines_per_page=0?><xsl:variable name="first_rec" xdofo:ctx="incontext" select="position()"/>
Please help me to solve this issue...
Thanks
Rajesh

What was the problem in the template? I am facing the same error, when I put a conditional in the data field, it throws the XML-22036: (Error) Cannot convert to number.
error, where if the element was printed directly it works fine.
error
<Line 984, Column 130>: XML-22036: (Error) Cannot convert to number.
@Line 984 ==> <xsl:variable name="v148" select="format-number(string(xdoxslt:one($v147)), string('###0.00'), string('_DECIMALFORMAT'))"/>
End of Process.
<format>
Number, ###0.00
<DATA >BROKEN
If (to_number(../DocumentPayableCount) + to_number(Extend/NumberOfPO) + sum(to_number(../DocumentPayable/Extend/Commentlength))) <= 7 then Extend/InvoiceAmount end if
<DATA >ALSO BROKEN
If (../DocumentPayableCount + Extend/NumberOfPO + sum(../DocumentPayable/Extend/Commentlength)) <= 7 then Extend/InvoiceAmount end if
<DATA> WORKS
then Extend/InvoiceAmount

[SOLVED] configure: error: cannot run C compiled programs

I'm trying to build lib32-libxkbcommon 0.5.0-1 from AUR with makepkg. I already tried installing pacman (setting the default makepkg.conf) and multilib-devel with no luck.
makepkg messages:
==> Making package: lib32-libxkbcommon 0.5.0-1 (Mon May 11 00:17:05 EEST 2015)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found libxkbcommon-0.5.0.tar.xz
==> Validating source files with sha256sums...
libxkbcommon-0.5.0.tar.xz ... Passed
==> Extracting sources...
-> Extracting libxkbcommon-0.5.0.tar.xz with bsdtar
bsdtar: Failed to set default locale
==> Starting prepare()...
==> Removing existing $pkgdir/ directory...
==> Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for style of include used by make... GNU
checking for gcc... gcc -m32
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
==> ERROR: A failure occurred in build().
Aborting...
makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
#-- The package required by makepkg to download VCS sources
# Format: 'protocol::package'
VCSCLIENTS=('bzr::bzr'
'git::git'
'hg::mercurial'
'svn::subversion')
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j5"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(!distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(!distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
config.log:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by libxkbcommon configure 0.5.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/usr --libdir=/usr/lib32 --disable-docs --disable-static
## Platform. ##
hostname = Arch
uname -m = x86_64
uname -r = 4.0.1-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /usr/lib/jvm/default/bin
PATH: /usr/bin/site_perl
PATH: /usr/bin/vendor_perl
PATH: /usr/bin/core_perl
## Core tests. ##
configure:2424: checking for a BSD-compatible install
configure:2492: result: /usr/bin/install -c
configure:2503: checking whether build environment is sane
configure:2558: result: yes
configure:2709: checking for a thread-safe mkdir -p
configure:2748: result: /usr/bin/mkdir -p
configure:2755: checking for gawk
configure:2771: found /usr/bin/gawk
configure:2782: result: gawk
configure:2793: checking whether make sets $(MAKE)
configure:2815: result: yes
configure:2844: checking whether make supports nested variables
configure:2861: result: yes
configure:2987: checking whether to enable maintainer-specific portions of Makefiles
configure:2996: result: yes
configure:3023: checking for style of include used by make
configure:3051: result: GNU
configure:3122: checking for gcc
configure:3149: result: gcc -m32
configure:3378: checking for C compiler version
configure:3387: gcc -m32 --version >&5
gcc (GCC) 5.1.0
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3398: $? = 0
configure:3387: gcc -m32 -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/5.1.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/gcc-multilib/src/gcc-5-20150505/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --enable-libmpx --with-system-zlib --with-isl --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --disable-libssp --enable-gnu-unique-object --enable-linker-build-id --enable-lto --enable-plugin --enable-install-libiberty --with-linker-hash-style=gnu --enable-gnu-indirect-function --enable-multilib --disable-werror --enable-checking=release --with-default-libstdcxx-abi=c++98
Thread model: posix
gcc version 5.1.0 (GCC)
configure:3398: $? = 0
configure:3387: gcc -m32 -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3387: gcc -m32 -qversion >&5
gcc: error: unrecognized command line option '-qversion'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3418: checking whether the C compiler works
configure:3440: gcc -m32 -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3444: $? = 0
configure:3492: result: yes
configure:3495: checking for C compiler default output file name
configure:3497: result: a.out
configure:3503: checking for suffix of executables
configure:3510: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3514: $? = 0
configure:3536: result:
configure:3558: checking whether we are cross compiling
configure:3566: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
In file included from /usr/include/stdio.h:27:0,
from conftest.c:11:
/usr/include/features.h:365:25: fatal error: sys/cdefs.h: No such file or directory
compilation terminated.
configure:3570: $? = 1
configure:3577: ./conftest
./configure: line 3579: ./conftest: No such file or directory
configure:3581: $? = 127
configure:3588: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure:3590: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
## Cache variables. ##
ac_cv_env_CC_set=set
ac_cv_env_CC_value='gcc -m32'
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=-D_FORTIFY_SOURCE=2
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_DOT_set=
ac_cv_env_DOT_value=
ac_cv_env_DOXYGEN_set=
ac_cv_env_DOXYGEN_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=set
ac_cv_env_PKG_CONFIG_PATH_value=/usr/lib32/pkgconfig
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_XCB_XKB_CFLAGS_set=
ac_cv_env_XCB_XKB_CFLAGS_value=
ac_cv_env_XCB_XKB_LIBS_set=
ac_cv_env_XCB_XKB_LIBS_value=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_set=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_value=
ac_cv_env_YACC_set=
ac_cv_env_YACC_value=
ac_cv_env_YFLAGS_set=
ac_cv_env_YFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/usr/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC='gcc -m32'
ac_cv_prog_make_make_set=yes
am_cv_make_support_nested_variables=yes
## Output variables. ##
ACLOCAL='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing aclocal-1.14'
ADMIN_MAN_DIR=''
ADMIN_MAN_SUFFIX=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='1'
AM_V='$(V)'
APP_MAN_DIR=''
APP_MAN_SUFFIX=''
AR=''
AUTOCONF='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoconf'
AUTOHEADER='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoheader'
AUTOMAKE='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing automake-1.14'
AWK='gawk'
BASE_CFLAGS=''
BUILD_LINUX_TESTS_FALSE=''
BUILD_LINUX_TESTS_TRUE=''
CC='gcc -m32'
CCDEPMODE=''
CFLAGS='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
CHANGELOG_CMD=''
CPP=''
CPPFLAGS='-D_FORTIFY_SOURCE=2'
CWARNFLAGS=''
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DLLTOOL=''
DOT=''
DOXYGEN=''
DRIVER_MAN_DIR=''
DRIVER_MAN_SUFFIX=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_DOCS_FALSE=''
ENABLE_DOCS_TRUE=''
ENABLE_X11_FALSE=''
ENABLE_X11_TRUE=''
EXEEXT=''
FGREP=''
FILE_MAN_DIR=''
FILE_MAN_SUFFIX=''
GREP=''
HAVE_DOT=''
HAVE_DOT_FALSE=''
HAVE_DOT_TRUE=''
HAVE_DOXYGEN_FALSE=''
HAVE_DOXYGEN_TRUE=''
HAVE_NO_UNDEFINED_FALSE=''
HAVE_NO_UNDEFINED_TRUE=''
INSTALL_CMD=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro'
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIB_MAN_DIR=''
LIB_MAN_SUFFIX=''
LIPO=''
LN_S=''
LTLIBOBJS=''
MAINT=''
MAINTAINER_MODE_FALSE='#'
MAINTAINER_MODE_TRUE=''
MAKEINFO='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing makeinfo'
MANIFEST_TOOL=''
MAN_SUBSTS=''
MISC_MAN_DIR=''
MISC_MAN_SUFFIX=''
MKDIR_P='/usr/bin/mkdir -p'
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OTOOL64=''
OTOOL=''
PACKAGE='libxkbcommon'
PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon'
PACKAGE_NAME='libxkbcommon'
PACKAGE_STRING='libxkbcommon 0.5.0'
PACKAGE_TARNAME='libxkbcommon'
PACKAGE_URL='http://xkbcommon.org'
PACKAGE_VERSION='0.5.0'
PATH_SEPARATOR=':'
PKG_CONFIG=''
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH='/usr/lib32/pkgconfig'
RANLIB=''
RT_LIBS=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
STRICT_CFLAGS=''
STRIP=''
VERSION='0.5.0'
XCB_XKB_CFLAGS=''
XCB_XKB_LIBS=''
XKBCONFIGROOT=''
XLOCALEDIR=''
XORG_MALLOC_DEBUG_ENV=''
XORG_MAN_PAGE=''
YACC=''
YACC_INST=''
YFLAGS=''
ac_ct_AR=''
ac_ct_CC='gcc -m32'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/install-sh'
libdir='/usr/lib32'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "libxkbcommon"
#define PACKAGE_TARNAME "libxkbcommon"
#define PACKAGE_VERSION "0.5.0"
#define PACKAGE_STRING "libxkbcommon 0.5.0"
#define PACKAGE_BUGREPORT "[url]https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon[/url]"
#define PACKAGE_URL "[url]http://xkbcommon.org[/url]"
#define PACKAGE "libxkbcommon"
#define VERSION "0.5.0"
configure: exit 1
other info:
core/pacman 4.2.1-1
multilib/gcc-multilib 4.9.2-4 (multilib-devel) [installed]
The GNU Compiler Collection - C and C++ frontends for multilib
multilib/lib32-fakeroot 1.20.2-1 (multilib-devel) [installed]
Tool for simulating superuser privileges (32-bit)
multilib/lib32-libltdl 2.4.5-1 (multilib-devel) [installed]
A generic library support script (32-bit)
Last edited by tsester (2015-05-10 22:10:28)

tsester wrote:P.S.: I recently transfered the linux system between failing disks
In that case you should probably check that no other packages are missing files with
pacman -Qkk 2>&1 | grep "No such file or directory"
Any packages that report that they're missing files, you should reinstall.

Acrobat Pro 8 and Reader X - Enable Extended Features for Form

Using Acrobat Pro 8.3.0, I "Enabled Usage Rights for Adobe Reader" for a fillable form created in LiveCycle Designer 8.0. The following error message occurs when opening this form in Reader X:
"This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer available. Please contact the author for the original version of this document."
The form has not been changed and as mentioned, I am the author. Any solutions to allow user in Reader X to fill-in form? Do I need to upgrade to Acrobat Pro X?

I am having same problem with a 2011 year tax PDF fill in form I JUST got from IRS website. The actual form is the 2011 8829.
I can not open the PDF from the web browser or if I save it to my local drive.
I have not been able to open it at all ... thus I have made NO changes.
I am running Windows 7 64 bit, Adobe Reader X version 10.1.4.
After trying to open the doc (nothing displays) I go to properties, and it says ...
Title: 2011 Form 8829
Author: SE:W:CAR:MP
Created: 12/23/2008
PDF Producer: Adobe LiveCycle DSesigner ES 8.2.
PDF Version: 1.7 (Acrobat 8.x)
Tagged PDF: No
Fast Web View: No
What do I do to resolve this ... I only have this version of Reader ... nothing else.

The Document Enabled Extended Features in Adobe Reader.

Hi Experts,
We are facing a problem while opening a PDF form that is editable. get below error message:
The Document Enabled Extended Features in Adobe Reader, The document has been changed since it was created & use of extended features is no longer available. Please contact the author for the original version of the document.
Our requirement is like we received a PDF template from client. we added an image field by using Adobe LiveCycle designer to achieve user signature on the field & save the PDF form, once signature field is added; PDF form is opened in Adobe Acrobat X pro to enable readers extensions (open PDF form in Adobe Acrobat X pro -> File -> Save As - > Readers Extended PDF -> Enable Additional features.).
Once this reader Enabled PDF form is uploaded in sharepoint Document library where from user can download this form on their local, open this PDF form is opened in Adobe Reader on their local system the Above mentioned message appears.
Here we are using trial version of Adobe Acrobat X Pro, Can you please confirm if this error is because of this trial version? or some alternate approch.
Thanks,
Ram

Check your computer's date.

Pooladm: cannot enable pools: No such file or directory

I'm having a problem enabling pools in Solaris 10. I used a core installation and manually installed the SUNWpool, SUNWpoolr, SUNWzoner, and SUNWzoneu packages.
When I try to execute "pooladm -e" to enable pools I get the following error:
pooladm: cannot enable pools: No such file or directory
Also, when I enable the svc:/system/pools:default service it errors into maintenance state with the same error in the log file.
I believe the problem is related to the non-existance of /dev/pool, but I'm not sure why it is not there.
Here is the output from truss:
bash-3.00# truss -f pooladm -e
2753:   execve("/usr/sbin/pooladm", 0xFFBFFC8C, 0xFFBFFC98) argc = 2
2753:   resolvepath("/usr/lib/ld.so.1", "/lib/ld.so.1", 1023) = 12
2753:   resolvepath("/usr/sbin/pooladm", "/usr/sbin/pooladm", 1023) = 17
2753:   stat("/usr/sbin/pooladm", 0xFFBFFA68)           = 0
2753:   open("/var/ld/ld.config", O_RDONLY)             Err#2 ENOENT
2753:   stat("/lib/libpool.so.1", 0xFFBFF520)           Err#2 ENOENT
2753:   stat("/usr/lib/libpool.so.1", 0xFFBFF520)       = 0
2753:   resolvepath("/usr/lib/libpool.so.1", "/usr/lib/libpool.so.1", 1023) = 21
2753:   open("/usr/lib/libpool.so.1", O_RDONLY)         = 3
2753:   mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 172032, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF370000
2753:   mmap(0xFF370000, 93041, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF370000
2753:   mmap(0xFF398000, 7097, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 98304) = 0xFF398000
2753:   munmap(0xFF388000, 65536)                       = 0
2753:   memcntl(0xFF370000, 17100, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libc.so.1", 0xFFBFF520)              = 0
2753:   resolvepath("/lib/libc.so.1", "/lib/libc.so.1", 1023) = 14
2753:   open("/lib/libc.so.1", O_RDONLY)                = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 1015808, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF200000
2753:   mmap(0xFF200000, 909301, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF200000
2753:   mmap(0xFF2EE000, 32017, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 909312) = 0xFF2EE000
2753:   mmap(0xFF2F6000, 5984, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF2F6000
2753:   munmap(0xFF2DE000, 65536)                       = 0
2753:   memcntl(0xFF200000, 144128, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libxml2.so.2", 0xFFBFF520)           Err#2 ENOENT
2753:   stat("/usr/lib/libxml2.so.2", 0xFFBFF520)       = 0
2753:   resolvepath("/usr/lib/libxml2.so.2", "/usr/lib/libxml2.so.2", 1023) = 21
2753:   open("/usr/lib/libxml2.so.2", O_RDONLY)         = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 1540096, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF080000
2753:   mmap(0xFF080000, 1397070, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF080000
2753:   mmap(0xFF1E4000, 72885, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 1392640) = 0xFF1E4000
2753:   mmap(0xFF1F6000, 2168, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF1F6000
2753:   munmap(0xFF1D6000, 57344)                       = 0
2753:   mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF360000
2753:   memcntl(0xFF080000, 202876, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libscf.so.1", 0xFFBFF520)            = 0
2753:   resolvepath("/lib/libscf.so.1", "/lib/libscf.so.1", 1023) = 16
2753:   open("/lib/libscf.so.1", O_RDONLY)              = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 172032, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF330000
2753:   mmap(0xFF330000, 97095, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF330000
2753:   mmap(0xFF358000, 4934, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 98304) = 0xFF358000
2753:   munmap(0xFF348000, 65536)                       = 0
2753:   memcntl(0xFF330000, 20432, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libnvpair.so.1", 0xFFBFF520)         = 0
2753:   resolvepath("/lib/libnvpair.so.1", "/lib/libnvpair.so.1", 1023) = 19
2753:   open("/lib/libnvpair.so.1", O_RDONLY)           = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 98304, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF310000
2753:   mmap(0xFF310000, 24206, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF310000
2753:   mmap(0xFF326000, 1192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 24576) = 0xFF326000
2753:   munmap(0xFF316000, 65536)                       = 0
2753:   memcntl(0xFF310000, 7604, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libexacct.so.1", 0xFFBFF520)         Err#2 ENOENT
2753:   stat("/usr/lib/libexacct.so.1", 0xFFBFF520)     = 0
2753:   resolvepath("/usr/lib/libexacct.so.1", "/usr/lib/libexacct.so.1", 1023) = 23
2753:   open("/usr/lib/libexacct.so.1", O_RDONLY)       = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 90112, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF060000
2753:   mmap(0xFF060000, 15042, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF060000
2753:   mmap(0xFF074000, 888, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 16384) = 0xFF074000
2753:   munmap(0xFF064000, 65536)                       = 0
2753:   memcntl(0xFF060000, 3568, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libpthread.so.1", 0xFFBFF520)        = 0
2753:   resolvepath("/lib/libpthread.so.1", "/lib/libpthread.so.1", 1023) = 20
2753:   open("/lib/libpthread.so.1", O_RDONLY)          = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00002000, 16384, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF3EC000
2753:   mmap(0xFF3EC000, 12032, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF3EC000
2753:   close(3)                                        = 0
2753:   stat("/lib/libz.so.1", 0xFFBFF520)              Err#2 ENOENT
2753:   stat("/usr/lib/libz.so.1", 0xFFBFF520)          = 0
2753:   resolvepath("/usr/lib/libz.so.1", "/usr/lib/libz.so.1", 1023) = 18
2753:   open("/usr/lib/libz.so.1", O_RDONLY)            = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 139264, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF030000
2753:   mmap(0xFF030000, 69442, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF030000
2753:   mmap(0xFF050000, 6012, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 65536) = 0xFF050000
2753:   munmap(0xFF042000, 57344)                       = 0
2753:   memcntl(0xFF030000, 5032, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libm.so.2", 0xFFBFF520)              = 0
2753:   resolvepath("/lib/libm.so.2", "/lib/libm.so.2", 1023) = 14
2753:   open("/lib/libm.so.2", O_RDONLY)                = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 786432, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEF00000
2753:   mmap(0xFEF00000, 693647, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEF00000
2753:   mmap(0xFEFB8000, 28592, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 688128) = 0xFEFB8000
2753:   munmap(0xFEFAA000, 57344)                       = 0
2753:   memcntl(0xFEF00000, 33076, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libsocket.so.1", 0xFFBFF520)         = 0
2753:   resolvepath("/lib/libsocket.so.1", "/lib/libsocket.so.1", 1023) = 19
2753:   open("/lib/libsocket.so.1", O_RDONLY)           = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 122880, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF000000
2753:   mmap(0xFF000000, 44594, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF000000
2753:   mmap(0xFF01C000, 4277, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 49152) = 0xFF01C000
2753:   munmap(0xFF00C000, 65536)                       = 0
2753:   memcntl(0xFF000000, 14320, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libnsl.so.1", 0xFFBFF520)            = 0
2753:   resolvepath("/lib/libnsl.so.1", "/lib/libnsl.so.1", 1023) = 16
2753:   open("/lib/libnsl.so.1", O_RDONLY)              = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 729088, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEE00000
2753:   mmap(0xFEE00000, 594942, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEE00000
2753:   mmap(0xFEEA2000, 33745, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 598016) = 0xFEEA2000
2753:   mmap(0xFEEAC000, 23232, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFEEAC000
2753:   munmap(0xFEE92000, 65536)                       = 0
2753:   mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF300000
2753:   memcntl(0xFEE00000, 89508, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libdoor.so.1", 0xFFBFF520)           = 0
2753:   resolvepath("/lib/libdoor.so.1", "/lib/libdoor.so.1", 1023) = 17
2753:   open("/lib/libdoor.so.1", O_RDONLY)             = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 81920, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEFE0000
2753:   mmap(0xFEFE0000, 3315, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEFE0000
2753:   mmap(0xFEFF2000, 600, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 8192) = 0xFEFF2000
2753:   munmap(0xFEFE2000, 65536)                       = 0
2753:   memcntl(0xFEFE0000, 2240, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libuutil.so.1", 0xFFBFF520)          = 0
2753:   resolvepath("/lib/libuutil.so.1", "/lib/libuutil.so.1", 1023) = 18
2753:   open("/lib/libuutil.so.1", O_RDONLY)            = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 106496, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEEE0000
2753:   mmap(0xFEEE0000, 26032, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEEE0000
2753:   mmap(0xFEEF8000, 1882, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 32768) = 0xFEEF8000
2753:   munmap(0xFEEE8000, 65536)                       = 0
2753:   memcntl(0xFEEE0000, 6652, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libgen.so.1", 0xFFBFF520)            = 0
2753:   resolvepath("/lib/libgen.so.1", "/lib/libgen.so.1", 1023) = 16
2753:   open("/lib/libgen.so.1", O_RDONLY)              = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 98304, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEEC0000
2753:   mmap(0xFEEC0000, 22089, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEEC0000
2753:   mmap(0xFEED6000, 2303, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 24576) = 0xFEED6000
2753:   munmap(0xFEEC6000, 65536)                       = 0
2753:   memcntl(0xFEEC0000, 5656, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   munmap(0xFF3A0000, 8192)                        = 0
2753:   mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEFD0000
2753:   getcontext(0xFFBFF758)
2753:   getrlimit(RLIMIT_STACK, 0xFFBFF738)             = 0
2753:   getpid()                                        = 2753 [2752]
2753:   setustack(0xFEFD2088)
2753:   sigfillset(0xFF2F64D8)                          = 0
2753:   stat("/platform/SUNW,Sun-Fire-T200/lib/libc_psr.so.1", 0xFFBFF1B0) = 0
2753:   resolvepath("/platform/SUNW,Sun-Fire-T200/lib/libc_psr.so.1", "/platform/sun4v/lib/libc_psr.so.1", 1023) = 33
2753:   open("/platform/SUNW,Sun-Fire-T200/lib/libc_psr.so.1", O_RDONLY) = 3
2753:   mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFEDF0000
2753:   close(3)                                        = 0
2753:   brk(0x00022448)                                 = 0
2753:   brk(0x00024448)                                 = 0
2753:   getprivimplinfo(0xFFBFF2E0, 2076)               = 0
2753:   sysconfig(_CONFIG_NGROUPS)                      = 16
2753:   zone_lookup("")                                 = 0
2753:   zone_getattr(0, ZONE_ATTR_PRIVSET, 0xFEFD02C8, 12) = 12
2753:   getppriv(PRIV_EFFECTIVE, {ffffffffffffffffffffffff}) = 0
2753:   open64("/dev/pool", O_RDONLY)                   Err#2 ENOENT
2753:   fstat64(2, 0xFFBFEC88)                          = 0
pooladm2753:    write(2, " p o o l a d m", 7)                   = 7
: 2753: write(2, " : ", 2)                             = 2
cannot enable pools2753:        write(2, " c a n n o t   e n a b l".., 19)      = 19
: 2753: write(2, " : ", 2)                             = 2
No such file or directory2753: write(2, " N o   s u c h   f i l e".., 25)      = 25
2753:   write(2, "\n", 1)                               = 1
2753:   _exit(1)

All it took was running devfsadm and the errors were gone.

[Flat File Source [2]] Error: Cannot open the datafile "VendorPurchases20050512.txt".

hi
I'm trying to use foreachloop container in order to read the data that i have in several txt files and upload it into MRR table.
when i'm trying to run the package, i'm getting the following error:
[Flat File Source [2]] Warning: The system cannot find the file specified.
[Flat File Source [2]] Error: Cannot open the datafile "VendorPurchases20050512.txt".
[SSIS.Pipeline] Error: Flat File Source failed the pre-execute phase and returned error code 0xC020200E.
I don't know what's the problem since it was working before.In the flat file connection manager i defined all the path including the name of the file.
I'll be happy for assistance
thanks
Yaron

Hi Yaron,
Does the file stored in local file system or a share folder on remote server? If you can load data from a file in local computer, but cannot load data from a file in a remote computer, the issue may be caused by the Kerberos authentication. In this condition,
check the following points:
Enable SQL Server for Kerberos
Check delegation settings for SQL Server service account and Computer
Add Host SPNs for FileShare Server and SQL Server
References:
http://msdn.microsoft.com/en-us/library/dd568720.aspx
http://msdn.microsoft.com/en-us/library/ms191153.aspx
Regards,
Mike Yin
TechNet Community Support

I cannot enable find my mac

As the title says, I cannot enable find my mac, i am running 10.8.2, and cant see any updates in the app store,
I've looked up some things and I think that my recovery hd isn't up to date, there is a patch for updating you recovery hd, but only for 10.7,
Any ideas on fixing this? I read that rerunning the mountain lion install would recreate the recovery hd (question: would i lose my data?), but when i try to run it it says:
this disk isn't using guid partitionlabeling, change it with diskutility, but in diskutility i cant find a way to change this..
thanks for the help

You have a very strange partition table because of three reasons:
It's MBR, and you need a GUID partition table.
You have the Boot Camp volume above your OS X volume.
You have three partitions on your hard disk, and Boot Camp only allows two partitions on the hard disk.
You need to erase the whole hard disk, so you have to make backups. For OS X, you can use Time Machine to back up your hard disk or you can use Carbon Copy Cloner to make a clone on an external disk. For Windows, use WinClone. You will need an external disk, so if you haven't got one, you should buy it.
Then, to install Mountain Lion, as you haven't got the Recovery HD for Mountain Lion, you can use Lion Diskmaker to copy the Mountain Lion installer onto a DVD or USB drive.
After doing all those steps, follow these ones to install Mountain Lion again on a GUID partition table.
Open Boot Camp Assistant and delete the Boot Camp partition. If it doesn't allow you, skip this step.
Insert the USB drive or DVD with Mountain Lion, press Option key while your Mac is starting and choose the DVD or USB drive with Mountain Lion.
OS X Utilities window will appear, so open Disk Utility. Here's when the fun starts.
Select your hard disk at the top of the sidebar and go to Partition tab.
On the window, choose "Options" and select GUID Partition Table. Then, press OK.
You will return to the Partition. Select each partition one by one on the bar and press - button until all disappear.
Then, press + button, choose "Mac OS Extended (Journaled)" in Format and press Apply.
When it has finished, close Disk Utility and install OS X. It can take from 15 minutes to 30, depending of the disk you are using to install Mountain Lion and if you are installing it onto a HDD or SSD.
When the installation finishes, restore the backups so you will leave your Mac as it was before erasing the disk

Error "Cannot be resolved to a type" on OwnerPIN, APDU, ISO7816

The error I'm reffering to might clearify the fact that I'm new at Java/javaCard-development.
To learn how it all works I've downloaded an example and try to understand what happens.
I opened the source in Eclipse and get errors "Cannot be resolved to a type" on OwnerPIN, ADPU and ISO7816 classes. I have an Import javacard.framework statement and expected these types to be part of this library.
I guess I'm forgetting something somewhere but couldn't find the soluiton on internet.
import javacard.framework.*; // import all neccessary packages for java card*
import java.applet.;
import java.lang.Object;
public class classpgdata extends Applet {
final static byte PROP_CLASS = (byte) 0x80; // Class of the proprietary APDU commands
static {color:#ff0000}OwnerPIN{color} pin; // the PIN object
public void process({color:#ff0000}APDU{color} apdu) {
byte[] cmd_apdu = apdu.getBuffer();
if (cmd_apdu[{color:#ff0000}ISO7816{color}.OFFSET_CLA] == {color:#ff0000}ISO7816{color}.CLA_ISO7816) {
//----- it is the ISO/IEC 7816 class
switch(cmd_apdu[{color:#ff0000}ISO7816{color}.OFFSET_INS]) { // check the instruction byte
case INS_SELECT: // it is a SELECT FILE instruction
...

Hi,
What you need to do update your Java build path fr the project in your Eclipse project.
Project -> Properties then find Java Build Path.
In the Libraries tab add the {JCDK Home}/lib/javacardframework.jar by clicking the add external JARs button. You may also want to remove the standard Java Runtime (JRE) libraries as you do not build against these.
If you want to use the JC 2.2.1 CAP file converter, you may also want to ensure that the Eclipse compiler is set to compile as Java 1.3 in the Java Compiler section of the project properties.
KeesdeVink wrote:
import javacard.framework.*; // import all neccessary packages for java card
import java.applet.*;
import java.lang.Object;
It also looks like you have added two imports you don't actually want. You only need the javacard.framework.* import.
Cheers,
Shane
Edited by: safarmer on 23/09/2009 08:00

Oracle.xml.sql.OracleXMLSQLException:Cannot enable auto commit within JTS transaction

Hi All,
OracleXMLSave class in the Oracle XDK is being used to load XML data into an 8170 database. The Java code is running in IBM WebSphere with container-managed transactions. When JTA is enabled with the Merant JDBC driver for Oracle, we get the following error when the XML is loaded:
oracle.xml.sql.OracleXMLSQLException: Cannot enable auto commit within JTS
transaction
     at java.lang.Throwable.fillInStackTrace(Native Method)
     at oracle.xml.sql.dml.OracleXMLSave.saveXML(OracleXMLSave.java:2213)
     at oracle.xml.sql.dml.OracleXMLSave.insertXML(Compiled Code)
This suggests the OracleXMLSave class is not aware of the fact that it is now operating in a JTS transaction where control is managed elsewhere. i.e. should also not attempt to commit or rollback, as this is the responsibility of the container.
Is there a property which needs to set to prevent the above or does the XDK not work with J2EE (JTS) transactions?.
If you have any useful comments, let me know. Testing the above presents me with a number of problems so if this is easily explained , let me know.
Thanks,
Malcolm

Clearly , there does seem to be something a bit odd with the above stack.
<Bug:1917808> mentions OracleXMLSave in context of plsql equivalent : dbms_xmlsave . i.e dbms_xmlsave is a wrapper around OracleXMLSave class.
disabling autocommit on connection as follows should help:
conn = DriverManager.getConnection("connect string","scott","tiger");
conn.setAutoCommit(false);
to disble auto commit and see if this has an effect.
This issue might be <Bug:1497506>. If disabling autocommit does not work then it appears that it could be this issue .
Malcolm
Hi All,
OracleXMLSave class in the Oracle XDK is being used to load XML data into an 8170 database. The Java code is running in IBM WebSphere with container-managed transactions. When JTA is enabled with the Merant JDBC driver for Oracle, we get the following error when the XML is loaded:
oracle.xml.sql.OracleXMLSQLException: Cannot enable auto commit within JTS
transaction
     at java.lang.Throwable.fillInStackTrace(Native Method)
     at oracle.xml.sql.dml.OracleXMLSave.saveXML(OracleXMLSave.java:2213)
     at oracle.xml.sql.dml.OracleXMLSave.insertXML(Compiled Code)
This suggests the OracleXMLSave class is not aware of the fact that it is now operating in a JTS transaction where control is managed elsewhere. i.e. should also not attempt to commit or rollback, as this is the responsibility of the container.
Is there a property which needs to set to prevent the above or does the XDK not work with J2EE (JTS) transactions?.
If you have any useful comments, let me know. Testing the above presents me with a number of problems so if this is easily explained , let me know.
Thanks,
Malcolm

ORA-00385: cannot enable Very Large Memory with new buffer cache 11.2.0.2

[oracle@bnl11237dat01][DWH11]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Production on Mon Jun 20 09:19:49 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup mount pfile=/u01/app/oracle/product/11.2.0/dbhome_1/dbs//initDWH11.ora
ORA-00385: cannot enable Very Large Memory with new buffer cache parameters
DWH12.__large_pool_size=16777216
DWH11.__large_pool_size=16777216
DWH11.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
DWH12.__pga_aggregate_target=2902458368
DWH11.__pga_aggregate_target=2902458368
DWH12.__sga_target=4328521728
DWH11.__sga_target=4328521728
DWH12.__shared_io_pool_size=0
DWH11.__shared_io_pool_size=0
DWH12.__shared_pool_size=956301312
DWH11.__shared_pool_size=956301312
DWH12.__streams_pool_size=0
DWH11.__streams_pool_size=134217728
#*._realfree_heap_pagesize_hint=262144
#*._use_realfree_heap=TRUE
*.audit_file_dest='/u01/app/oracle/admin/DWH/adump'
*.audit_trail='db'
*.cluster_database=true
*.compatible='11.2.0.0.0'
*.control_files='/dborafiles/mdm_bn/dwh/oradata01/DWH/control01.ctl','/dborafiles/mdm_bn/dwh/orareco/DWH/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_name='DWH'
*.db_recovery_file_dest='/dborafiles/mdm_bn/dwh/orareco'
*.db_recovery_file_dest_size=7373586432
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=DWH1XDB)'
DWH12.instance_number=2
DWH11.instance_number=1
DWH11.local_listener='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=bnl11237dat01-vip)(PORT=1521))))'
DWH12.local_listener='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=bnl11237dat02-vip)(PORT=1521))))'
*.log_archive_dest_1='LOCATION=/dborafiles/mdm_bn/dwh/oraarch'
*.log_archive_format='DWH_%t_%s_%r.arc'
#*.memory_max_target=7226785792
*.memory_target=7226785792
*.open_cursors=1000
*.processes=500
*.remote_listener='LISTENERS_SCAN'
*.remote_login_passwordfile='exclusive'
*.sessions=555
DWH12.thread=2
DWH11.thread=1
DWH12.undo_tablespace='UNDOTBS2'
DWH11.undo_tablespace='UNDOTBS1'
SPFILE='/dborafiles/mdm_bn/dwh/oradata01/DWH/spfileDWH1.ora' # line added by Agent
[oracle@bnl11237dat01][DWH11]$ cat /etc/sysctl.conf
# Kernel sysctl configuration file for Red Hat Linux
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.
# Controls IP packet forwarding
net.ipv4.ip_forward = 0
# Controls source route verification
net.ipv4.conf.default.rp_filter = 1
# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
# Controls whether core dumps will append the PID to the core filename
# Useful for debugging multi-threaded applications
kernel.core_uses_pid = 1
# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 1
# Controls the maximum size of a message, in bytes
kernel.msgmnb = 65536
# Controls the default maxmimum size of a mesage queue
kernel.msgmax = 65536
# Controls the maximum shared segment size, in bytes
kernel.shmmax = 68719476736
# Controls the maximum number of shared memory segments, in pages
#kernel.shmall = 4294967296
kernel.shmall = 8250344
# Oracle kernel parameters
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
kernel.shmmax = 536870912
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586
net.ipv4.tcp_wmem = 262144 262144 262144
net.ipv4.tcp_rmem = 4194304 4194304 4194304
Please can I know how to resolve this error.

CAUSE: User specified one or more of { db_cache_size , db_recycle_cache_size, db_keep_cache_size, db_nk_cache_size (where n is one of 2,4,8,16,32) } AND use_indirect_data_buffers is set to TRUE. This is illegal.
ACTION: Very Large Memory can only be enabled with the old (pre-Oracle_8.2) parameters

Error! cannot enable extended adj rogue

Similar Messages

Maybe you are looking for