ERROR CANNOT OPEN SKYPE AT ALL

Hello, I have version of skype 6.22 and windows 7 64-bit professional (fully updated) and cannot open skype at all, the message appears is: Application Error: Exception EOIeSysError in module Skype.exe at 0012A0F1. Access is denied.
I have tried several times to unistall and install skype but no any progress.
Please advise
Thanks

Open Windows Event Viewer -> Custom Views -> Administrative Events. Look for the recent error messages with timestamp corresponding to Skype crash. Copy and paste here the text from the General tab.

Similar Messages

Cannot open SKYPE at all.

good people, Please help me , I tried thousand ways in order to launch/open Skype( in Lenovo) . but doesn't work at all. I press on Skype icon it doesn't show me nothing. Recap, it doesn't open. Who can take me out of this,please?

What version of Windows are you on (XP, Vista, Windows 7, Windows 8 )? Is it 32-bit or 64-bit? http://support.microsoft.com/kb/827218 What is the version of Internet Explorer installed on your computer? In Internet Explorer go to Help -> About Internet Explorer. P.S. Please, don’t say that you are not using Internet Explorer. This is irrelevant. Skype depends on Internet Explorer.

My iTunes operating files were somehow corrupted on my pc. Is there a way to download iTunes again, and yet preserve my playlists? II cannot open iTunes at all right now. My playlists are intact on my iPod. Thanks

My iTunes operating files were somehow corrupted on my pc. Is there a way to download iTunes again while preserving my playlists?
I cannot open iTunes at all right now.
My playlists are intact on my iPod.
Thanks

Hi, InsaneCharlie.
Thanks for the question. I see you have uninstalled iTunes and want this program back. Start with completely uninstalling iTunes if present and all of it's components in the order specified in the article below. Once this is done, download and install iTunes. If none of your data was modified in the iTunes media folder, then your data should be present upon installation.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
If you experience issues during installation, see the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
Jason H.

[Flat File Source [2]] Error: Cannot open the datafile "VendorPurchases20050512.txt".

hi
I'm trying to use foreachloop container in order to read the data that i have in several txt files and upload it into MRR table.
when i'm trying to run the package, i'm getting the following error:
[Flat File Source [2]] Warning: The system cannot find the file specified.
[Flat File Source [2]] Error: Cannot open the datafile "VendorPurchases20050512.txt".
[SSIS.Pipeline] Error: Flat File Source failed the pre-execute phase and returned error code 0xC020200E.
I don't know what's the problem since it was working before.In the flat file connection manager i defined all the path including the name of the file.
I'll be happy for assistance
thanks
Yaron

Hi Yaron,
Does the file stored in local file system or a share folder on remote server? If you can load data from a file in local computer, but cannot load data from a file in a remote computer, the issue may be caused by the Kerberos authentication. In this condition,
check the following points:
Enable SQL Server for Kerberos
Check delegation settings for SQL Server service account and Computer
Add Host SPNs for FileShare Server and SQL Server
References:
http://msdn.microsoft.com/en-us/library/dd568720.aspx
http://msdn.microsoft.com/en-us/library/ms191153.aspx
Regards,
Mike Yin
TechNet Community Support

Getting error "cannot open" when playing Videos purchased on itunes.

I'm trying to stream videos from my PC to my iPad 2 using the "Videos" app and i keep getting error "cannot open" on any video that I try to play that I purchased through iTunes. Other videos I added that werent purshased through itunes play fine however. Can anyone help with a solution? My iPad is on 5.0.1 if that helps.

I'm getting this error suddenly. I used to be able to stream purchased movies just fine, and now it simply says, "Cannot open." With movies I ripped from my DVDs, they will play just fine, but movies purchased from iTunes give the error every time.
I know I don't have any odd characters in my name like mikesoderstrom had and I haven't changed any account details since the last time it was working a few weeks ago. The only major change I can think of is upgrading to iTunes 11.
My iTunes account says that both my Mac and my Phone are still authorized. Maybe I should try deauthorizing all anyway, but I'd rather not deal with the hassle of re-authorizing, especially if it didn't work for someone who tried it already.
I have no problems with downloading/updating apps, just with Home Sharing purchased movies.

Loosing X ... 'Error: cannot open display: localhost:11.0'

Hello, I hope some may be able to help me finding a solution to this X related problem.
Before Lion everything worked as expected.
From a terminal I
ssh -X user@linuxbox
and it work as expected... all the X application come back to my Mac.
but after a while (generaly not long ... about 5 to 10 min)
I cannot launch any X application anymore.
within my Terminal I get "Error: cannot open display: localhost:11.0"
and on the linuxbox side I get " sshd[xxxx]: channel 4: open failed: administratively prohibited: open failed"
Running 10.7.1. fully updated (from my 10.6.8 Mac I do not have this problem
... and never had)
Thanks in advance for your help
PhS

'arch' is set as the alias for localhost. I never entered 'arch' anyway, that's just what the error said.
e: I tried ssh-ing into a X session on another laptop running an Ubuntu live CD. I can ssh into it normally, but when I run 'xinit -e ssh -XCT [email protected] gnome-session -- :1' it just starts a new X session on ctrl+alt+F8 using my startx file, rather than the one on the other computer.
Last edited by Yes (2008-07-11 19:17:28)

Error "cannot open render.mov"

Hi
In FCP, Im trying to fix up some audio. Sent the clip to Soundtrack pro (STP) but STP says error "cannot open render.mov"
any suggestions?
I also tried opening the file directly - eg "open in editor"didn't work
also tried changing the extension to ".wav" which didn't work either.

Hi
I've got the same difficulty sending clips to Soundtrack Pro in Final Cut Studio 3. This evening, I found a turnaround that works (at least in my case), but that do not explain whether it is a bug or not.
I observed that when I send a clip to STP, two files are created :
• one looks like a STP package file and contains two small files (among them a render.mov that can be read by QT, showing that it is a sound file)
• the other has the same name but truncated (only the first 18 letters) and is a video clip.
I put this last video clip inside the STP package, and then it worked : this new package file opens in STP correctly, I can edit the sound tracks, and when I save the file in STP, all changes are made in FCP.
Can you reproduce this on your systems ?

Documents backup failure in commvault with error Cannot open file ReportViewer.dwp

Hi,
SharePoint Documents backup failure in commvault with error "Cannot open file ReportViewer.dwp" even all necessary permissions are available for all the sites , sql

Hi Praveen,
Whether you tried to backup the library using PowerShell exporting command.
Export sites, lists, or document libraries in SharePoint 2013:
http://technet.microsoft.com/en-us/library/ee428301(v=office.15).aspx
As the commvault is a third party tool and I am not familar with it, I suggest you ask the third party support or forum for help.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Upgrade Plug-ins error (Cannot Open File)

I was working on a document in CS3 as a final thesis for my masters work. I was using a Blurb template in order to export the file for printing. In between working on the file, one afternoon I could no longer open the file and was met with the follwing error:
Cannot Open File
IMAGE.RPLN
IMAGE FILTERS.RPLN
HYPERLINKS.RPLN
"Cannot open "Masters_book dec.indd".
Please upgrade your plug-ins to their latest
versions, or upgrade to the latest version of
Adobe InDesign."
I hadn't changed any other files on my computer or ran any updates. I was simply met with the error when I tried launching the application. After trying to run necessary updates I was still met with the same error message. I downloaded the trial version of CS5 on another machine and tried to open it and was once again met with the above error message. I have a back up of the file that I can use but it still represents a lot of lost work if I have to resort to an old file.

I probably shouldn't dwell, on this, but I can get really worked up over it.
I come from the Cosmos and I can assure you we have sent no "Rays" to your puny Earth Planet today!(*)
Since this concerns a CS3 file and I haven't seen posts of others having the same issue, either with CS3 or with any other version, I have to take it as a One-Time Fluke.
I'm pretty firmly convinced this never happens. There are real problems and even if we only see them once, they are happening hundreds and thousands of times and going unreported and undetected, but they are no less real. In fact, because of the reporting bias towards repeatable problems, they are probably causing added frustration and confusion without being detected or fixed properly. So, IMNSHO, we owe a larger duty to pay attention to so-called "unreproducible" bugs.
(You can imagine how well these conversations with Adobe Support go...)
Of course, in this case, it's probably really hard to find the problem. And since it's effectively an end-of-life'd product that is 3 versions behind the released product and at least 4 versions behind the development product, well, it's hard to lose too much sleep over it.
(*) Yes, I know, this incident would not have been "today." Consider it time dilation.

I updated the system to OS X Mavericks and now I cannot open iPhoto with all my pics in. I trying to update iPhoto and this note appears: "Update unavailable with this Apple ID"

iMac OS X 10.9.4
3.06 GHz Intel Core 2 Duo
4 GB 1067 MHz DDR3
I updated the system to OS X Mavericks and now I cannot open iPhoto with all my pics in.
I trying to update iPhoto 9.5.1 and this note appears:

Make sure you're logged in to the App Store with the same Apple ID that you used to download and install Mavericks. If necessary, log out of the App Store and log back in.
If that fails contact the App Store support personnel via the link circled in this screenshot:

I cannot open Mozilla at all sometimes, why is that?

Sometimes I cannot open Mozilla at all, nothing happens when I click on it. I have to re-start my computer, then minimize so I can have access to it. What is happening with that?

Hello Marilyn.
Look at this support article:
http://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit
Hopefully it has the answer for your question.

Cannot open preview at all since upgrade to Mavericks

cannot open preview at all since upgrade to Mavericks

It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

Getting an error 'Cannot open Boot device' while trying to install Solaris

Hi,
We were trying to install Solaris * on a Sun Sparc system and the CD rom drive does not seem to get recognised. When we try booting from cd rom we get an error 'Cannot open boot device' .
This server was up & running and we were trying to remove a hard disk that had failed and modified the vfstab script . After that the system failed to even boot up. So when we tried reinstalling the OS we are running into this problem.
Am new to this technology ...And any help would be greatly appreciated. .....
Thanks

Cdrom drive must be scsi device 6
I assume you are running < boot cdrom> at the ok prompt
also at the ok prompt run the command <probe-scsi> (without the angled brackets) you need to see the following:
Target 6
Unit 0 Removable read only device TOSHIBA XM.......bigpileofnumbers
If not, check the cdrom drive and the cdrom inside
hope this helps
Alan

Client copy error:cannot open log:/w2k3-web53/sapmnt/trans/log/cc000007.ecc

Hi Experts,
While Client copy in Local System , I am facin gthis Error, please anybody help me out.
client copy error:cannot open log:/w2k3-web53/sapmnt/trans/log/cc000007.ecc
Regards,
Amit,

Your Error Message is like => cannot open log:/w2k3-web53/sapmnt/trans/log/cc000007.ecc
This means 'w2k3-web53' is your machine name. and your sap system name is 'ECC'.
1) If you are on windows then :
    Type '
w2k3-web53\sapmnt' in address bar, this gives you an error and hence you are getting the above mentioned SAP error.
    Therefore to get out of this error follow the simple steps=>
     I) Create 'sapmnt/trans/log' (recursive) directories anywhere on your machine.
    II) Share 'sapmnt' directory over network {right click on directory->properties->sharing} with full access to others.
   III) Confirm this by typing '
w2k3-web53\sapmnt' in your address bar. 'CC00000*.ECC' will be created automatically by SAP system while copying.
2) If you are using Linux then:
    Create the directories as mentioned above and give full access to directories by using CHMOD command.
    Share 'sapmnt' directory if necessary.
Note: Change the protection level of your client in SAP if necessary:
SCC4->EDIT->Double click your client -> then set Protection level at level 0 {No restriction}.

Getting error- Cannot open as archive for CS6 Master suite collection. How to d/l & install?

I have an account and a license key code. I purchased a new laptop that doesn't have a dvd drive. I want to download CS6 Master Suite Collection but I keep getting error "cannot open as archive"!!! I have already located the d/l files, but they will NOT install. Does anyone know how to get around this problem?

if you downloaded an exe and 7z, they should both be in the same folder and click (or double click) the exe.
do NOT manually try to extract the 7z file.
if that doesn't solve your problem, what file names and extensions did you download and what are their file sizes?

ERROR CANNOT OPEN SKYPE AT ALL

Similar Messages

Maybe you are looking for