Error! Cannot read or write to my ipod

Whenever I plug my ipod into my powerbook, I get the error, "The ipod cannot be updated. The disk could not be read or written to." It was working fine, and then all of a sudden this happened.
I've restored the ipod and reinstalled itunes, but I still have the same problem. The ipod is working fine, and I can still add music to it, but I have to do it manually and it locks up repeatedly. I have had problems syncing iphoto with it as well.
Please help! I've talked to a few friends that said it is a sign that my hard drive is failing. Any thoughts?

The solution is or at least it was for me is as simple as the "speed" of your USB conection. On my old PC i would connect my ipod via a USB on the front casing , no problems, when i changed my PC i used the front USB again and got the cannot read or write to ipod error. I just connected the ipod to one of the USBs at the rear and as i understand it they need to be USB2 type , have a go try all the USBs you have especially the ones at the back of your PC , hope this helps it did for me

Similar Messages

Ipod Shuffle connected but error (Cannot read or write on device)

Hello,
My Ipod Shuffle 2 is connected to my Itunes on, I can create the name and everything seems fine. When I try to transfer songs, Itunes is showing that it is synchronizing and then I get an error message saying it cannot read or write from the device. What's wrong? I try reset the ipod, re-install the Itunes but I still get the same error.
What's happening.
Please HELP.

Hi techie59!
See if the suggestions in this article help with your error:
"Disk cannot be read fro or written to" when syncing iPod
-Kylene

Ipod "cannot read or write to___'s Ipod"

Hey, I'm getting a very frustrating error... and was wondering what on earth it means... and why I can't use any more than 2.89 Gigs of my 60 gig ipod...
after trying to place more on it... pretty much of anything... it says that it can't read or write to <my ipod's name> and then there's an elipses
like.. I'm trying to get a digital life videocast onto it and obviously it isn't working.
very frustrating
and I'v also got a problem of it quite often saying that all my songs are movies... and then making my movies not work
after a couple of minutes of screwing around on the computer I can make it work again... so I must be doing something right
I'm not in a huge rush... considering I got my Ipod for free...
need any more info, obviously you'll ask
thanks in advance

I am still having trouble updating my ipod click wheel 40gb and my nano ipod also my brothers nano ipod which he connected to my 17"powerbook! only to have the same problems.
When updating the ipods they all manage to update a few songs then they seem to stop updating on any song then I get this meassage.
The error message reads (Attempting to copy to the disk "my ipod" failed. The disk could not be read from or written to) so after that I looked at the last song that was updated to my ipod,then I looked at the song that was straight after the one the got stuck, I then deleted the song after the last updated song from my itunes library and updated again, my ipod then proceeded to update some more songs, then it stopped again and I got the error message again, if I repeat this process of finding and deleting these songs it sort of works but this is all so wrong!!!! So after getting this message with three different ipods surely this problem lies with the computer NOT the ipods!
Can anyone please please help.

WARNING: Cannot "Read or Write" files on iPod

My iPod has been behaving very curiosly as of late. For the past month a wanring has flashed up on my iTunes screen when attempting to sync music files. The warning says *"Cannot read the disk 'iPod'. Unable to read or write files"*. Despite this warning my iPod has been able to update daily podcasts without issue. However, when I recently purchased new music I could not get it to sync to my iPod. I have no problem listening to this new album in my iTunes library, but it just will not sync to my iPod. I created a playlist for it and attempted to add it, but I discovered that the iPod was not syncing the playlists either!
In a recent attempt to remedy the problem I selected only to sync the playlist that had the new album. What happened was frightening. All my music was no longer on the iPod, with the exception of my podcasts! I tried altering the settings to return all the music, but now I am unable to add any of my music from the library.
I am wondering if anyone has experienced this difficulty before, and if so, if they have any trouble shooting techniques. I have already been ti Apple's support page and completed the 5 recommended steps, to no avail. Any suggestions or thoughts as to what might be occuring.

Luckily, backing up your itunes library is easy. Just duplicate the folder(s) with your music in it. (Most likely, it's user/Music/ITunes.) Once the copy is made, you might want to move it to a different part of your hard drive.
Now, restoring your ipod WILL wipe the device. If there's anything on your ipod that isn't in your itunes library (unlikely but possible), you want to make sure you've got a copy of it somewhere before restoring.
Before restoring, check to see if there is an update to the ipod's firmware that needs to be installed. This is a "longshot" but might help. Just click the "check for update" button on the ipod's "Summary" pane in itunes. (Current version is 1.2.3, I think).

Ipod will sync up once then says cannot read or write to disk.

Is this normal? The IPOD shows up in Itunes after the first sync but when I go and try to update the ipod again it says it cannot read or write to disk. Tech support says this is normal but it does not make any sense as the IPOD still shows up in Itunes.

the IPOd will sync up when I fiorst plug it in. the problem is when it is finished, Itunes says ipod update complete you can disconnect. I leave it connected, and if I try to update the ipod again after I download something or whatever into Itunes it comes back with the cannot read from or write to disk. I can unplug it and plug it back in and it work sfine. There is something with the software I guess that is not staying connected with the hardware after the first sync.

Error message: "iTunes cannot read the contents of the iPod."

I wanted to get my dad a new iPod for Xmas and transfer all his music from his ancient Classic. But when I connect to my MacBookPro, I get the error message: "iTunes cannot read the contents of the iPod." I see that 90% of the ipod drive is used, but I don't see any songs listed either on the iPod screen or in iTunes, which is worrying. Is there anything I can to save the music? He will be so upset that it's all gone...

My suggestions, when Restoring the iPod.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC.
Disconnect all other USB devices, except the mouse and keyboard.
Stop all other programs except iTunes.
Good Luck!

"iTunes cannot read the contents of the ipod", How can I fix this?

Hello everyone, I am having trouble with my iPod touch 32GB and getting iTunes to detect it. I'm using Windows 7.
When plugging it in tonight, I got the message "iTunes cannot read the contents of the iPod (Name). Go to the summary tab in the iPod preferences and click restore to restore this iPod to factory settings". I attemped to do this, but I then got an iTunes error "3184" and was unable to install the iPod software.
I've tried...
- Using a different computer
- Using a different USB cable
- Rebooting the iPod
Nothing seems to work. I've read a solution as to delete one of the iTunes files on the iPod, but the iPod doesn't show up in my Windows Explorer, so I am unable to do this. The computer does however charge the battery when I have the iPod plugged in. I'm also able to still listen to music on the iPod as well.
One other note, I had the same thing happen to my previous iPod touch. I got my original iPod touch back in December 2010. In October 2011, the iPod just died one day and I was not able to turn it on at all or charge it. When I'd plug it into the computer, I got the exact same errors and was unable to restore the iPod. I sent it in to Apple as it was still under warrenty and they sent me a replacement. Now 3 months later it's happened again. Of course the warrenty starts from the day you purchase the original, so this is no longer under warrenty despite having it for only 3 months. The only difference this time is that the battery still charges and I can still turn it on and listen to music.
Any ideas?
Thanks

hi Angie!
hmmm. is there an Apple Store convenient where you can take the ipod for a check-up?
love, b

ITunes Reports "iTunes Cannot read the contents of the iPod...."

This morning I connected my 2 week old iPod Classic to my laptop via the USB cable and iTunes came up and displayed a message saying "iTunes cannot read the contents of the iPod MHAM'S IPOD". It suggested a restore, which I have not tried yet. I have faithfully used the "Eject" function in iTunes to disconnect. After reading some other posts in the forums, it appears that others are having a similar issue. I'm concerned that this is normal operating behavior for this product. Given that this is my first Apple brand purchase, I'm a little turned off to the brand. Does anyone have a suggestion that doesn't involve me wiping this thing clean and starting over? And is this something that I should just expect? I ran a diagnostic and the results are below.
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Latitude D620
iTunes 7.4.3.1
iPodService 7.4.3.1 is currently running.
iTunesHelper 7.4.3.1 is currently running.
Current user is an administrator.
The current local date and time is 2007-10-16 07:04:02.
Connected Storage Devices:
Disk drive, Hitachi HTS541080G9SA00, Bus Type ATA, Bus Address [0,0]
Disk drive, Apple iPod USB Device, Bus Type USB
Disk drive, RIM BlackBerry SD USB Device, Bus Type USB
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No IEEE 1394 Host Controller found.
The iPod Service Logging Information:
[SERVICE: 0xF88,06:40:36 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Tue Oct 16 06:40:36 2007)
[SERVICE: 0xF88,06:40:36 INFO] ##### iPodService starting as a service, version: 7.4.3.1
[SERVICE: 0xFD0,06:40:36 INFO] Adding iTunesHelper to session 0
[SERVICE: 0xF98,06:40:36 INFO] Got signaled to go ahead... Starting device manager!
[SERVICE: 0x114,06:40:36 INFO] Listener Window created
[SERVICE: 0x114,06:40:57 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:40:58 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:40:58 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:40:59 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:40:59 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:41:40 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:42:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:42:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:44:25 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:45:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:45:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:48:13 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:50:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:50:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:13 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x114,06:57:13 INFO] device \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x114,06:57:13 INFO] device is an iPod
[SERVICE: 0x114,06:57:13 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x114,06:57:13 INFO] [-1] set waiting to mount = 1
[SERVICE: 0x114,06:57:13 INFO] [1] Assigning session 0
[SERVICE: 0x114,06:57:13 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0x114,06:57:13 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0x114,06:57:13 INFO] [1] added device number 2 to m_objDeviceNumberMap
[SERVICE: 0x114,06:57:13 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0x114,06:57:13 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:13 INFO] [1] input #0 from src #0
[SERVICE: 0xEC,06:57:13 INFO] [1] input #0
[SERVICE: 0x114,06:57:13 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:13 INFO] [1] input #1 from src #0
[SERVICE: 0x11C,06:57:13 INFO] [1] input #1
[SERVICE: 0x114,06:57:13 INFO] [VolumeArrive] mask = 0x20
[SERVICE: 0x114,06:57:13 INFO] looking up device # for \\.\F:
[SERVICE: 0x114,06:57:13 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x114,06:57:13 INFO] iTunes device #2 found with drive letter F, mask 0x20
[SERVICE: 0x114,06:57:13 INFO] [1] set waiting to mount = 0
[SERVICE: 0x114,06:57:13 INFO] [1] input #2 from src #0
[SERVICE: 0x128,06:57:13 INFO] [1] input #2
[SERVICE: 0x114,06:57:13 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:13 INFO] [1] input #3 from src #0
[SERVICE: 0x118,06:57:13 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x118,06:57:13 INFO] [First Connect] Creating connect event for device 1
[SERVICE: 0x118,06:57:13 INFO] [1] set waiting to mount = 1
[SERVICE: 0x118,06:57:13 INFO] [1] input #4 from src #0
[SERVICE: 0xEC,06:57:13 INFO] [MACHINE 1 INPUT #0] - (HDW) CheckDevNode
[SERVICE: 0xEC,06:57:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,06:57:14 INFO] [MACHINE 1 INPUT #1] - (HDW) CheckDevNode
[SERVICE: 0x11C,06:57:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x128,06:57:14 INFO] [MACHINE 1 INPUT #2] - (HDW) Volume Mount
[SERVICE: 0x128,06:57:14 INFO] ** CItunesDevice::HandleHardwareInput()
[SERVICE: 0x128,06:57:14 INFO] [1] input #3
[SERVICE: 0xEC,06:57:14 INFO] [1] input #4
[SERVICE: 0x128,06:57:14 INFO] [MACHINE 1 INPUT #3] - (HDW) CheckDevNode
[SERVICE: 0x128,06:57:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xEC,06:57:14 INFO] [MACHINE 1 INPUT #4] - (HDW) Interface Arrival
[SERVICE: 0xEC,06:57:14 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0xEC,06:57:14 INFO] [1] progress is now 2
[SERVICE: 0xEC,06:57:14 INFO] [1] progress is now 2
[SERVICE: 0xEC,06:57:14 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0xEC,06:57:14 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0xEC,06:57:14 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0xEC,06:57:14 INFO] VendorId: Apple
[SERVICE: 0xEC,06:57:14 INFO] ProductId: iPod
[SERVICE: 0xEC,06:57:14 INFO] revision: 1.62
[SERVICE: 0xEC,06:57:14 INFO] vendor bytes:
[SERVICE: 0xEC,06:57:14 INFO] 02 01 00 00 00 00 00 00 00 13 00 00 92 00 00 00 00 00 00 00
[SERVICE: 0xEC,06:57:14 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0xEC,06:57:14 INFO] [1] Power State: Powered
[SERVICE: 0xEC,06:57:14 INFO] [1] Checkpoint attempt #0
[SERVICE: 0xEC,06:57:14 ERROR] Did not find first letter of stage
[SERVICE: 0xEC,06:57:14 INFO] got HotPlugState 0
[SERVICE: 0xEC,06:57:14 INFO] [1] serial number 000A27001547056B
[SERVICE: 0xEC,06:57:14 INFO] Checkpoint successfully read from device [1]. Apple Serial Number [8N7344U3YMV]
[SERVICE: 0xEC,06:57:14 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0x118,06:57:14 INFO] [First Connect] Creating mount event for device 1
[SERVICE: 0x118,06:57:14 INFO] [VolumeArrive] mask = 0x7C
[SERVICE: 0x118,06:57:14 INFO] looking up device # for \\.\G:
[SERVICE: 0x118,06:57:14 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x118,06:57:14 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x118,06:57:14 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x118,06:57:14 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x118,06:57:14 INFO] looking up device # for \\.\F:
[SERVICE: 0x118,06:57:14 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x118,06:57:14 INFO] iTunes device #2 found with drive letter F, mask 0x20
[SERVICE: 0x118,06:57:14 INFO] [1] set waiting to mount = 0
[SERVICE: 0x118,06:57:14 INFO] [1] input #5 from src #0
[SERVICE: 0x118,06:57:14 INFO] looking up device # for \\.\E:
[SERVICE: 0x11C,06:57:14 INFO] [1] input #5
[SERVICE: 0x118,06:57:14 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x118,06:57:14 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x118,06:57:15 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x118,06:57:15 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x118,06:57:15 INFO] looking up device # for \\.\D:
[SERVICE: 0x118,06:57:15 INFO] type 0x7 drive 0x0 partition 0x3
[SERVICE: 0x118,06:57:15 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x118,06:57:15 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x118,06:57:15 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x11C,06:57:15 INFO] [MACHINE 1 INPUT #5] - (HDW) Volume Mount
[SERVICE: 0x11C,06:57:15 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0x11C,06:57:15 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,06:57:15 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x11C,06:57:15 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,06:57:15 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,06:57:15 ERROR] Did not find first letter of stage
[SERVICE: 0x11C,06:57:15 INFO] got HotPlugState 0
[SERVICE: 0x11C,06:57:19 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x11C,06:57:19 INFO] [1] ===== iPod with Video =====
[SERVICE: 0x11C,06:57:19 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,06:57:19 INFO] 6:57:19, year 2007, day of yr. 288, GMT offset -20 isDST 1
[SERVICE: 0x11C,06:57:19 INFO] [1] progress is now 0
[SERVICE: 0x11C,06:57:20 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x11C,06:57:20 INFO] [1] Auto-launch iTunes ENABLED
[SERVICE: 0x11C,06:57:20 INFO] iTunes located at 'C:\Program Files\iTunes\iTunes.exe'
[SERVICE: 0xF90,06:57:21 INFO] Getting iTunesHelper for session 0
[SERVICE: 0xF90,06:57:21 INFO] launching iTunes.
[SERVICE: 0x90C,06:57:25 INFO] <0x4> Got Serial #
[SERVICE: 0x90C,06:57:25 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xFD8,06:57:25 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,06:57:25 INFO] Mounted
[SERVICE: 0xFD8,06:57:25 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:57:25 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:57:25 INFO] Mounted
[SERVICE: 0x90C,06:57:25 INFO] [1] already mounted!
[SERVICE: 0x90C,06:57:25 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x90C,06:57:26 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xFD8,06:57:26 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,06:57:26 INFO] Mounted
[SERVICE: 0xFD8,06:57:26 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:57:26 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:57:26 INFO] <0x4> COM request for device 1 drive letter - F
[SERVICE: 0x90C,06:57:27 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,06:57:27 INFO] Mounted
[SERVICE: 0x90C,06:57:27 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,06:57:27 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,06:57:27 INFO] Mounted
[SERVICE: 0xFD8,06:57:27 INFO] [1] already mounted!
[SERVICE: 0xFD8,06:57:27 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xFD8,06:57:40 INFO] Mounted
[SERVICE: 0xFD8,06:57:40 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:57:40 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:57:40 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,06:57:40 INFO] Mounted
[SERVICE: 0x90C,06:57:40 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,06:57:40 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:58:19 INFO] <0x4> Got Serial #
[SERVICE: 0x90C,06:58:19 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xFD8,06:58:19 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,06:58:19 INFO] Mounted
[SERVICE: 0xFD8,06:58:19 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:58:19 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:58:19 INFO] Mounted
[SERVICE: 0x90C,06:58:19 INFO] [1] already mounted!
[SERVICE: 0x90C,06:58:19 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x90C,06:58:19 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xFD8,06:58:19 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,06:58:19 INFO] Mounted
[SERVICE: 0xFD8,06:58:19 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:58:19 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:58:19 INFO] <0x4> COM request for device 1 drive letter - F
[SERVICE: 0x90C,06:58:19 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,06:58:19 INFO] Mounted
[SERVICE: 0x90C,06:58:19 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,06:58:19 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,06:58:19 INFO] Mounted
[SERVICE: 0xFD8,06:58:19 INFO] [1] already mounted!
[SERVICE: 0xFD8,06:58:19 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xFD8,06:58:23 INFO] Mounted
[SERVICE: 0xFD8,06:58:23 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:58:23 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:58:23 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,06:58:23 INFO] Mounted
[SERVICE: 0x90C,06:58:23 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,06:58:23 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,06:58:26 INFO] [1] input #6 from src #4
[SERVICE: 0x128,06:58:26 INFO] [1] input #6
[SERVICE: 0x128,06:58:27 INFO] [MACHINE 1 INPUT #6] - (APP) Unmount
[SERVICE: 0x128,06:58:27 INFO] [1] Begin...
[SERVICE: 0x128,06:58:27 INFO] [1] Mounted state
[SERVICE: 0x128,06:58:27 INFO] total locks = 1, caller = 296, caller locks = 1
[SERVICE: 0x128,06:58:27 INFO] [1] Begin Unmounting...
[SERVICE: 0x128,06:58:27 INFO] [1] progress is now 3
[SERVICE: 0x128,06:58:27 INFO] total locks = 2, caller = 296, caller locks = 2
[SERVICE: 0x128,06:58:27 INFO] Ejecting media
[SERVICE: 0x128,06:58:27 INFO] SUCCESS
[SERVICE: 0x128,06:58:27 INFO] Volume lock success!
[SERVICE: 0x128,06:58:28 INFO] total locks = 3, caller = 296, caller locks = 3
[SERVICE: 0x128,06:58:29 INFO] CMQuery_And_RemoveSubTreeW stop
[SERVICE: 0x114,06:58:29 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:29 INFO] [1] input #7 from src #0
[SERVICE: 0xEC,06:58:29 INFO] [1] input #7
[SERVICE: 0x114,06:58:29 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:29 INFO] [1] input #8 from src #0
[SERVICE: 0x11C,06:58:29 INFO] [1] input #8
[SERVICE: 0x128,06:58:29 INFO] CMQuery_And_RemoveSubTreeW took 625 ms
[SERVICE: 0x128,06:58:29 INFO] total locks = 2, caller = 296, caller locks = 2
[SERVICE: 0x128,06:58:29 INFO] total locks = 1, caller = 296, caller locks = 1
[SERVICE: 0x128,06:58:29 INFO] [1] Finished Unmounting with status 1
[SERVICE: 0x128,06:58:29 INFO] total locks = 0, caller = 296, caller locks = 0
[SERVICE: 0x128,06:58:29 INFO] [1] Ext app unmount request finished!
[SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 INPUT #7] - (HDW) CheckDevNode
[SERVICE: 0xEC,06:58:30 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,06:58:30 INFO] [MACHINE 1 INPUT #8] - (HDW) CheckDevNode
[SERVICE: 0x11C,06:58:30 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x114,06:58:30 INFO] [VolumeRemoved] existing mask 0x20, arrive mask 0x20
[SERVICE: 0x114,06:58:30 INFO] [1] value = 1
[SERVICE: 0x114,06:58:30 INFO] [1] input #9 from src #0
[SERVICE: 0x128,06:58:30 INFO] [1] input #9
[SERVICE: 0x114,06:58:30 INFO] [InterfaceRemoved]
[SERVICE: 0x114,06:58:30 INFO] [1] value = 0
[SERVICE: 0x114,06:58:30 INFO] removed device number 2 from m_objDeviceNumberMap
[SERVICE: 0x114,06:58:30 INFO] [1] input #10 from src #0
[SERVICE: 0xEC,06:58:30 INFO] [1] input #10
[SERVICE: 0x128,06:58:30 INFO] [MACHINE 1 INPUT #9] - (HDW) Volume Unmount
[SERVICE: 0x128,06:58:30 INFO] [1] progress is now 3
[SERVICE: 0x128,06:58:30 INFO] [1] Setting progress to 3
[SERVICE: 0x128,06:58:30 INFO] [MACHINE 1 TRANSITION] - {Mounted} ==> {Connected}
[SERVICE: 0x128,06:58:30 INFO] [1] *** UNMOUNTED - Sending event out, device session 0.
[SERVICE: 0x128,06:58:30 INFO] [1] !!!!! DoConnectStateAction() INTERRUPTED.
[SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 INPUT #10] - (HDW) Interface Removal
[SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Unknown}
[SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 ACTIONS] - {Unknown}
[SERVICE: 0xEC,06:58:30 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xEC,06:58:30 ERROR] device number 0 exists, but isn't in m_objDeviceNumberMap!
[SERVICE: 0xEC,06:58:30 INFO] [1] *** DISCONNECTED - Sending event out, device session 0.
[SERVICE: 0xEC,06:58:30 INFO] [1] progress is now 0
[SERVICE: 0xEC,06:58:30 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x114,06:58:38 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:38 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,06:58:38 INFO] [1] input #11 from src #0
[SERVICE: 0x11C,06:58:38 INFO] [1] input #11
[SERVICE: 0x114,06:58:38 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:38 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,06:58:38 INFO] [1] input #12 from src #0
[SERVICE: 0x128,06:58:38 INFO] [1] input #12
[SERVICE: 0x114,06:58:38 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:38 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,06:58:38 INFO] [1] input #13 from src #0
[SERVICE: 0xEC,06:58:38 INFO] [1] input #13
[SERVICE: 0x11C,06:58:38 INFO] [MACHINE 1 INPUT #11] - (HDW) CheckDevNode
[SERVICE: 0x11C,06:58:38 INFO] [1] PHYSICALLY DISCONNECTED!
[SERVICE: 0x128,06:58:38 INFO] [MACHINE 1 INPUT #12] - (HDW) CheckDevNode
[SERVICE: 0x128,06:58:38 INFO] [1] PHYSICALLY DISCONNECTED!
[SERVICE: 0xEC,06:58:38 INFO] [MACHINE 1 INPUT #13] - (HDW) CheckDevNode
[SERVICE: 0xEC,06:58:38 INFO] [1] PHYSICALLY DISCONNECTED!
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #14 from src #0
[SERVICE: 0x11C,07:02:24 INFO] [1] input #14
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #15 from src #0
[SERVICE: 0x128,07:02:24 INFO] [1] input #15
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #16 from src #0
[SERVICE: 0xEC,07:02:24 INFO] [1] input #16
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #17 from src #0
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #18 from src #0
[SERVICE: 0x11C,07:02:24 INFO] [MACHINE 1 INPUT #14] - (HDW) CheckDevNode
[SERVICE: 0x11C,07:02:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x128,07:02:24 INFO] [MACHINE 1 INPUT #15] - (HDW) CheckDevNode
[SERVICE: 0x128,07:02:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xEC,07:02:24 INFO] [MACHINE 1 INPUT #16] - (HDW) CheckDevNode
[SERVICE: 0xEC,07:02:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xEC,07:02:24 INFO] [1] input #17
[SERVICE: 0x11C,07:02:24 INFO] [1] input #18
[SERVICE: 0xEC,07:02:25 INFO] [MACHINE 1 INPUT #17] - (HDW) CheckDevNode
[SERVICE: 0xEC,07:02:25 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:25 INFO] [MACHINE 1 INPUT #18] - (HDW) CheckDevNode
[SERVICE: 0x11C,07:02:25 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x114,07:02:27 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x114,07:02:27 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x114,07:02:27 INFO] [1] set waiting to mount = 1
[SERVICE: 0x114,07:02:27 INFO] [1] Attempt to reassign from session 0 to session 0, DENIED!
[SERVICE: 0x114,07:02:27 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0x114,07:02:27 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0x114,07:02:27 INFO] [1] added device number 2 to m_objDeviceNumberMap
[SERVICE: 0x114,07:02:27 INFO] [1] input #19 from src #0
[SERVICE: 0x128,07:02:27 INFO] [1] input #19
[SERVICE: 0x114,07:02:27 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:27 INFO] [1] input #20 from src #0
[SERVICE: 0xEC,07:02:27 INFO] [1] input #20
[SERVICE: 0x114,07:02:27 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:27 INFO] [1] input #21 from src #0
[SERVICE: 0x11C,07:02:27 INFO] [1] input #21
[SERVICE: 0x114,07:02:27 INFO] [VolumeArrive] mask = 0x20
[SERVICE: 0x114,07:02:27 INFO] looking up device # for \\.\F:
[SERVICE: 0x114,07:02:27 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x114,07:02:27 INFO] iTunes device #2 found with drive letter F, mask 0x20
[SERVICE: 0x114,07:02:27 INFO] [1] set waiting to mount = 0
[SERVICE: 0x114,07:02:27 INFO] [1] input #22 from src #0
[SERVICE: 0x114,07:02:27 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:27 INFO] [1] input #23 from src #0
[SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 INPUT #19] - (HDW) Interface Arrival
[SERVICE: 0x128,07:02:28 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x128,07:02:28 INFO] [1] progress is now 2
[SERVICE: 0x128,07:02:28 INFO] [1] progress is now 2
[SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0x128,07:02:28 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0x128,07:02:28 INFO] VendorId: Apple
[SERVICE: 0x128,07:02:28 INFO] ProductId: iPod
[SERVICE: 0x128,07:02:28 INFO] revision: 1.62
[SERVICE: 0x128,07:02:28 INFO] vendor bytes:
[SERVICE: 0x128,07:02:28 INFO] 02 01 00 00 00 00 00 00 00 13 00 00 92 00 00 00 00 00 00 00
[SERVICE: 0x128,07:02:28 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0x128,07:02:28 INFO] [1] Power State: Powered
[SERVICE: 0x128,07:02:28 INFO] [1] Checkpoint attempt #0
[SERVICE: 0x128,07:02:28 ERROR] Did not find first letter of stage
[SERVICE: 0x128,07:02:28 INFO] got HotPlugState 0
[SERVICE: 0x128,07:02:28 INFO] [1] serial number 000A27001547056B
[SERVICE: 0x128,07:02:28 INFO] Checkpoint successfully read from device [1]. Apple Serial Number [8N7344U3YMV]
[SERVICE: 0x128,07:02:28 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0xEC,07:02:28 INFO] [MACHINE 1 INPUT #20] - (HDW) CheckDevNode
[SERVICE: 0xEC,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 INPUT #21] - (HDW) CheckDevNode
[SERVICE: 0x11C,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:28 INFO] [1] input #22
[SERVICE: 0x128,07:02:28 INFO] [1] input #23
[SERVICE: 0xFD8,07:02:28 INFO] <0x4> Got Serial #
[SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 INPUT #22] - (HDW) Volume Mount
[SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 INPUT #23] - (HDW) CheckDevNode
[SERVICE: 0x11C,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x11C,07:02:28 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x128,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:28 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,07:02:28 ERROR] Did not find first letter of stage
[SERVICE: 0x11C,07:02:28 INFO] got HotPlugState 0
[SERVICE: 0x11C,07:02:33 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x11C,07:02:33 INFO] [1] ===== iPod with Video =====
[SERVICE: 0x11C,07:02:33 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,07:02:33 INFO] 7:2:33, year 2007, day of yr. 288, GMT offset -20 isDST 1
[SERVICE: 0x11C,07:02:33 INFO] [1] progress is now 0
[SERVICE: 0xFD8,07:02:33 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,07:02:33 INFO] Mounted
[SERVICE: 0xFD8,07:02:33 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,07:02:33 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,07:02:33 INFO] Mounted
[SERVICE: 0x90C,07:02:33 INFO] [1] already mounted!
[SERVICE: 0x11C,07:02:34 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x11C,07:02:34 INFO] [1] Auto-launch iTunes ENABLED
[SERVICE: 0x11C,07:02:34 INFO] iTunes located at 'C:\Program Files\iTunes\iTunes.exe'
[SERVICE: 0x90C,07:02:34 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xFD8,07:02:34 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0x90C,07:02:34 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,07:02:34 INFO] Mounted
[SERVICE: 0x90C,07:02:34 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,07:02:34 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,07:02:34 INFO] <0x4> COM request for device 1 drive letter - F
[SERVICE: 0xFD8,07:02:35 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,07:02:35 INFO] Mounted
[SERVICE: 0xFD8,07:02:35 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,07:02:35 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,07:02:35 INFO] Mounted
[SERVICE: 0x90C,07:02:35 INFO] [1] already mounted!
[SERVICE: 0x90C,07:02:35 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xF8C,07:02:35 INFO] iTunes already running in current session.
[SERVICE: 0x90C,07:03:51 INFO] Mounted
[SERVICE: 0x90C,07:03:51 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,07:03:51 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,07:03:51 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,07:03:51 INFO] Mounted
[SERVICE: 0xFD8,07:03:51 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,07:03:51 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,07:03:51 INFO] <0x4> GetFormatType() returned unknown format 0
The iPod updater logging file cannot be found.

I had this same exact issue happen to me this morning, and I lost 40 gigs worth of transferring in restoring it. I put a few albums on for the day, and when I tried connecting again this evening, the same thing happened. It hit me when it happened the second time that both times I had the iPod locked when it connected it to the computer. I'm pretty sure I've never accidentally connected it while locked before. My guess it that it is unable to read the content since the iPod is locked, and somehow this causes some sort of corruption that prevents it from seeing the files until a restoration is done. I would think Apple should be able to release an update which would detect if the iPod was locked and tell you to unlock it rather than to go through this process of losing all your music from the iPod. It scares me to think this could happen again simply if I am absent-minded in the future and forget to check whether it is locked or not before I connect it.

ITunes cannot read the contents of the iPod " my iPod's name ".

I'm having problems with syncing the 5th gen nano to iTunes 9 on my early 2008 MBP. I had one since September when they came out. It was fine for a while, but then I would get the error message: iTunes cannot read the contents of the iPod "<my iPod's name>". It got to where it was happening every other night or every night when I would try to sync. Of course it goes without saying that this makes the video camera unusable, since one can't count on retrieving the videos.
I talked with Apple Support on the phone. They were very good. Led me through a rescue-restore. This was described as more thorough than a normal restore. It involves a non-trivial button sequence. Also per suggestions I quit using a non-powered hub. I had been hooking both my iPod touch2 and my nano5 up to the hub to sync (not enough USB ports).
We tried the rescue-restore and things looked OK, but then a couple days later on the evening sync, the message came back. I should also mention that I use the pedometer feature in always-on mode, so of course that data gets lost as well.
I then went to the local apple store genius bar, and they saw the same error message I got when they plugged it in, so they decided to give me a new nano5.
I figured this was really it, but last night, on the second evening sync since the initial setup, the same error message is back with the new nano5. Feel bad because it now seems likely there was nothing wrong with my first nano5 (unless both are bad the same way - seems unlikely), but at the same time, I can't use any nano5 like things are now.
So now it's time for some detective work. I have both a nano5 and a touch2, and I use pedometer in always-on mode on the nano5. I wonder if those might be clues. Last night when the error occurred, iirc I had previously sync'ed the nano5 ok and ejected. Then I had sync'ed my touch2. I unplugged the touch2 and went to sync the nano5 again to update for some playlist changes, and that's when the error occurred. I wonder if iTunes is somehow getting messed up and thinking it is still dealing with a touch2, and it trounces the nano5?
It's probably a long shot, but I think I read someone else here with the same error message, and had a touch.
Any ideas, would love to hear. I'm planning to try only syncing the nano5 on a fresh start of iTunes for a while, and see if that prevents the problem.
Thanks,
Joe

OK. How do I uninstall iTunes to reinstall it? Is there an uninstaller? Do I have to chase down plist files or other hidden system things I don't know about? Kind of a dumb question maybe, I've been on a mac at home for like five years now, but uninstalling apps is not something I need to do (that's a good thing).
So, yes, the problem happened again, with the new nano, on the second or third nightly sync (not sure how many days have gone by) since the plane to sync the nano first before the touch. Been using the right usb port also, in case that matters. Used to always use the left. The left port has a non-powered hub that has my time machine disk and a super-duper disk on it, along with an iLoc key. Tonight the two usb disks were not plugged in due to being in the process of be traded out for my other pair (I keep a pair offsite as well - backup-paranoid - but that's another topic).
Do you think it could matter what's plugged into the opposite USB port? Not the nano and the touch only go into the right port straight away - no hub.
Kind of a bummer, this. I hope we can figure it out. Thanks for helping...
BTW, I alway keep all my software up to date.
Joe

Error 500: ERROR: Cannot forward. Writer or Stream already obtained. Error

hi
i m unable to fugure out y I m getting this error
it's a suggestion page and on submitting this page I have to reload the page but with status of the page (requires approval) in form of url
earlier say few days back , it was working fine , i had absolutely no issues in this
since 2-3 days everytime i submit the page , i m getting the error
Error 500: ERROR: Cannot forward. Writer or Stream already obtained. Error 500
my code is listed below
pls help
<%@ include file="../includes/sessionChecker.jsp"%>
<%@ page isThreadSafe="false" errorPage="../html/messError.jsp" %>
<%@ page import="java.io.*,java.util.*,java.sql.*" %>
<%@ page import="com.syntaxsoft.util.*" %>
<%@ page import="com.syntaxsoft.util.DateUtil" %>
<%@ page import="com.syntaxsoft.admin.*" %>
<%@ page import="com.syntaxsoft.employee.*" %>
<%@ page import="com.syntaxsoft.db.*" %>
<%@ include file="../includes/cssJsInclude.jsp"%>
<%@ taglib uri="QuinnoxTags" prefix="QuinnoxTags" %>
<html>
<head>
<title>Suggestions</title>
<meta http-equiv="Content-Type" content="xls/html; charset=iso-8859-1">
<link href="../STYLESHEET/stylesheet.css" rel="stylesheet" type="text/css">
</head>
<body>
<%!
     Table sqltab;
     SqlBuilder sqlObj;
%>
<%
     String dofc = "",subject="",suggestion = "",docsrno="",actions="";
     String pick_button = "",locateid = "",employid="",url="";
     String employeeid="";
     String tabname=" ";
     boolean success = false;
     ResultSet rs= null;
%>
<%
     employid = (String) session.getAttribute("empid");
     locateid = (String) session.getAttribute("locationid");
     Employee empobj = Employee.getEmployee(employid);
     DateUtil dateform = new DateUtil(locateid);
     actions = request.getParameter("actions");
     pick_button = request.getParameter("DECISION");
     System.out.println("ACTION"+actions);
     System.out.println("pick_button"+pick_button);
%>
<body>
<%
     if(actions.equals("create")){
          if(pick_button == null){
%>
               <form name="form1" method="post" action="../HRFiles/Suggestions.jsp">
                    <input type="hidden" name="actions" value="<%=actions%>">
               <div class="page_heading">Suggestion Box</div><br>
               <table>
                    <tr><th>From:</th><td><%=empobj.getFullName()%></td></tr>
                    <tr><th>Dated:</th><td><%=dateform.getToday()%></td></tr>
                    <tr><th>Subject</th><td><QuinnoxTags:TextBox type="text" name="subject" maxLength="65" required="true" value=" " label="Subject"/></td></tr>
                    <tr><th colspan="2">Suggestion:</th></tr>
                    <tr><td colspan="2"><QuinnoxTags:TextBox name="suggestion" type="textarea" cols="60" rows="13" required="true" value=" " label="Suggestion" maxLength="250"/></td></tr>
               </table><br>
               <table>
          <tr>
               <td align="right">
                    <input type="submit" name="DECISION" value="Submit" class="button">
               </td>
          </tr>
     </table>
               <input type="hidden" name="empid" value="<%=employid%>"
               <jsp:include page="../masters/flow.jsp" flush="true">
                    <jsp:param name="CREATOR" value="true"/>
                    <jsp:param name="TABNAME" value="SUGGESTION_WKFLOW"/>
               </jsp:include>

          </form>
<%
          else{
               dofc          = dateform.getTodayMillis()+"";
               subject          = request.getParameter("subject");
               suggestion     = request.getParameter("suggestion");
               tabname =request.getParameter("TABNAME");
               // insert into SUGGESTIONS
               // generate key
               IDs idObj = IDs.getIDs();
               docsrno = idObj.getId("SUGGESTIONID");
               sqlObj=new SqlBuilder("SUGGESTIONS");
               sqlObj.setColumn("DOCSLNO",docsrno);
               sqlObj.setColumn("EMPID",employid);
               sqlObj.setColumn("DOFC",dofc);
               sqlObj.setColumn("DOFCZONE",locateid);
               sqlObj.setColumn("SUBJECT",tabname);
               sqlObj.setColumn("SUGGESTION",suggestion);
//          System.out.println("empid is "+request.getParameter("empid"));
               System.out.println("empid is "+employid);
               success = sqlObj.set(SqlBuilder.INSERT);
%>
               <jsp:include page="../masters/flow1.jsp" flush="true">
                    <jsp:param name="DECISION" value="<%=request.getParameter(com.syntaxsoft.admin.WorkFlow.DECISION)%>" />
                    <jsp:param name="empid" value="<%=request.getParameter(\"empid\")%>" />
                    <jsp:param name="VIEWLEVEL" value="<%=request.getParameter(com.syntaxsoft.admin.WorkFlow.VIEWLEVEL)%>" />
                    <jsp:param name="VIEWERID" value="<%=request.getParameter(com.syntaxsoft.admin.WorkFlow.VIEWERID)%>" />
                    <jsp:param name="COMMENTS" value="<%=request.getParameter(com.syntaxsoft.admin.WorkFlow.COMMENTS)%>" />
                    <jsp:param name="DOCSLNO" value="<%=docsrno%>"/>
                    <jsp:param name="CREATOR" value="true"/>
                    <jsp:param name="TABNAME" value="<%=request.getParameter(\"TABNAME\")%>" />
                    <jsp:param name="MASTER_TABLE" value="SUGGESTIONS" />
               </jsp:include>
               <jsp:include page="../includes/redirectInclude.jsp" flush="true">
                    <jsp:param name="url" value="../HRFiles/ViewSuggestion.jsp?flag=empview" />
               </jsp:include>
<%
          } // end of if(pick_button == null)
     } // end of if(actions == create)
     if(actions.equals("select")){
          rs = sqltab.select("select * from SUGGESTIONS");
          if(rs.next()){
%>
               <div class="page_heading">List of Suggestions</div><br>
               <table>
                    <tr>
                         <th>Employee Id</th>
                         <th>Employee Name</th>
                         <th>Suggestion Date</th>
                         <th>Subject</th>
                    </tr>
<%
               do{
                    docsrno = rs.getString("DOCSLNO");
                    employeeid = rs.getString("EMPID");
                    dofc = rs.getString("DOFC");
                    subject = rs.getString("SUBJECT");
                    Employee empobj1 = Employee.getEmployee(employeeid);
                    url = "../HRFiles/Suggestions.jsp?actions=view&docsrno="+docsrno;
%>
                    <tr>
                         <td><a href="<%=url%>"><%=employeeid%></a></td>
                         <td><a href="<%=url%>"><%=empobj1.getFullName()%></a></td>
                         <td><a href="<%=url%>"><%=dateform.getDate(dofc)%></a></td>
                         <td><a href="<%=url%>"><%=subject%></a></td>
                    </tr>
<%
               }while(rs.next());
          } // end of if
     } // end of if(actions == select)
     if(actions.equals("view")){
          docsrno = request.getParameter("docsrno");
          rs = sqltab.select("select * from SUGGESTIONS where DOCSLNO='"+docsrno+"'");
          if(rs.next()){
               do{
                    docsrno = rs.getString("DOCSLNO");
                    employeeid = rs.getString("EMPID");
                    dofc = rs.getString("DOFC");
                    subject = rs.getString("SUBJECT");
                    suggestion = rs.getString("SUGGESTION");
               }while(rs.next());
          } // end of if()
          Employee empobj2 = Employee.getEmployee(employeeid);
%>
          <div class="page_heading">Suggestion Box</div><br>
          <table>
               <tr><th>From:</th><td><%=empobj2.getFullName()%></td></tr>
               <tr><th>Dated:</th><td><%=dateform.getDate(dofc)%></td></tr>
               <tr><th>Subject</th><td><%=subject%></td></tr>
               <tr><th colspan="2">Suggestion:</th></tr>
               <tr><td colspan="2"><textarea name="suggestion" cols="70" rows="10" readonly><%=suggestion%></textarea></td></tr>
          </table><br>
          <table>
               <tr><td colspan="4" align="right">Back</td></tr>
          </table>
<%
     } // end of if(actions == view)
%>
</body>
</html>
rgds

The problem is that you are trying to do a forward somewhere when output has already been sent to the browser: this is not allowed. I cannot find it in your code, so it must be in one of the includes.

Error: cannot read: {My applet name}

I write the little program in Notepad and save it in C:\JDK1.3.1_02\bin\. Then I go to Command Prompt and
type: javac {My applet name}. I then get the error: ERROR: CANNOT READ: {MY APPLET NAME}

This {My applet name} have the same name of your class? The Java don't compiles if your class name has different of the files name . Another Error that can be possible that you files it's read only in their properties. What you can make is enable your file for full access.

TS2771 itunes cannot read the contents of the ipod

Has anybody found a way to fix this error? I have restored my ipod several times, but keep getting the error every week.

I am having the same problem as the original poster on my IPOD CLASSIC. Here is a link to the product page on IPOD CLASSIC for those who may not know what it is.
I keep getting the error over and over. I am able to successfully reformat the device, and reinstall all my tunes etc. and everything's good. I do nothing in particular, maybe listen to a podcast. A week later, the tunes and podcasts are GONE and the iPod says there is no music, however all my photos are present. I plug it in. My disk data is present (I have it enabled for disk use) however iTunes blows the following error.
iTunes cannot read the contents of the iPod “MYPOD”. Go to the Summary tab in iPod preferences and click Restore to restore this iPod to factory settings.
Here is the SMART data for the iPod Classic's internal hard drive.
Retracts: 7
Reallocs: 0
Pending sectors: 0
PowerOn Hours:2849
Start/Stops: 7201
Temp: Current 32C
Temp: Min 9C
Temp: Max 51C
(those are very good numbers by the way, indicating a healthy drive.)
Any ideas? This started happening constantly several months ago, If I recall there was an iTunes update around that time.

RH 8: Error: Cannot Read RHFrameStyleMappings.apj

We recently upgraded from RH7 to RH8. One of our project files (.xpj) would not open. After clicking Okay to Upgrade to RH8 I got a message "Error: Cannot Read RHFrameStyleMappings.apj". I decided to try copying RHFrameStyleMappings.apj from another project folder into the project folder of the project file that would not open. Then when trying to open the project file again I received this message "Error: Cannot Read RHFrameDoc.apj" and once again I copied it over from another file. I tried opening it again and it worked. I also tried generating the project to make sure it worked and it appears to work as normal. My question is if there is any reason my copying the two .apj files over could cause problems with the project file or if I should consider the problem fixed. Thanks!

Is that not the same problem as running in this thread?
http://forums.adobe.com/message/2311195#2311195
See www.grainge.org for RoboHelp and Authoring tips

ITunes cannot read the contents of iPhone/iPod Touch?

After following these instructions to update iTunes https://discussions.apple.com/message/21853130#21853130 , Whenever i connect my iPod Touch 5th gen i get this message:
iTunes cannot read the contents of the iPod “(my ipod name)”. Go to the Summary tab in iPod preferences and click Restore to restore this iPod to factory settings.
i click ok then iTunes says:
The software required for communicating with the iPod is not installed correctly, and you must manually eject the iPod before each disconnect. Please reinstall iTunes to install the iPod’s software.
I am NOT restoring my iPod as i know this is iTunes' problem. I went to the apple website and downloaded iTunes for mac and then installed it Installer said it was succuesful but after opening itunes i get the same problem. What do i do?
I WILL NOT DO ANYTHING IN TERMINAL. I never touch terminal and never will.

Hi,
I've the same problem too.
I had made iPhone sync on my PC in the past. But my HDD went in trouble and I had to buy another and reinstall Windows, so I lost my iTunes library.
Having no sync was ok, since I was comfortable with the photos, applications and music in my iPhone.
But yesterday my iPhone went out of disk space, and my problem started. I then needed to sync. I tried to extract my paid applications from iPhone using "transfer purchases from my iPhone". Unsuccessful, since it did not copy every application. I've tried to download the applications again, but iTunes say I need to pay for them. And now, after some unsuccessful purchase transfers and backups, iTunes says "iTunes cannot read the contents of iPhone", so I think I'm forced to restore the original settings.
What should I do?
I don't want to pay again for the applications I already purchased.
I don't want to loose my application data.
I don't care about my music, photos and videos, cause I can get them elsewhere anyway.
Is there a way to save my iPhone, applications and data?
Thanks

ITunes cannot read the contents of my iPod?

I wanted to put some new songs onto my iPod, but when I plug it into the computer, a message pops up; 'iTunes cannot read the contents of the iPod. Go to the Summary tab in iPod preferences and click Restore to restore this iPod to its factory settings.'
I tried this, but when I connected my iPod to the computer again, the same message popped up. I have switched my iPod off and then back on, reconnected my iPod and downloaded iTunes again, but they all didn't work.
Does anyone know what to do?

Reboot the computer
Try another USB port
Try aoterh cable
Try another computer to helpo determine if y have an iPod or computer problem
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Error! Cannot read or write to my ipod

Similar Messages

Maybe you are looking for