Error Category: BPE ADAPTER???

i have a simple file to file scenario...with a BPM in which i have a send, a receive and one transformation...
on running the scenario..i get the error in the MONI
Error Category: BPE ADAPTER
Error ID: UNKNOWN MESSAGE...
whats the reason???????

Hi,
Tcode : SXI_CACHE
Select your integration process which you created in IR and activate.
again you will get the return code is 2 and again activate your integration process until you will get the return code is '0'.
Prerequisite for BPM : check tcode : SWF_XI_CUSTOMIZING
all are in green hook , if not get all are green hook
Regards
Chilla

Similar Messages

Error in BPE Adapter Processing

Hi Experts,
I have a scenario in which data flow from JDBC => BPE => ECC.
while sending data from JDBC to BPE adapter, faced below error in SXMB_MONI.
"Error in BPE Adapter Processing"
In SXMB_MONI, Overall status displays as "Manual Restart Possible" error as attached below.
I completed the all configuration related to SWF_XI_CUSTOMIZING and SXI_CACHE.
also my Integration process has return code 0 in SXI_CACHE.
I also want to know what are the software's required in PI related to BPM for both JAVA and ABAP Stack. i have a SAP PI System with version 7.31.
Please guide me to solve this error and also inform me if any configuration related to BPE adapter is missing or not.

hi dear,
Tried the reports which are mentioned in the notes and followed the link
but we couldn't resolve the same. can u please help us to move ahead to resolve our issue.
any corrections / suggestion regarding the same.
Permanent error in BPE inbound processing

Error in BPE Adapter

Hi,
I Want to Know How to Configure BPE Adapter.
I have Done the Scenario of Arpit's given in WEBLOG File to RFC to File using BPM.
I m getting the Following Error.
<sap:category>XIadapter</sap:category>
<sap:code area="BPE_ADAPTER">Unknown Message</sap:code area>
No Message Type found for this type.
Plz Suggest me.
Thanks in Advance,
Sree.

Sanjay,
XI 3.0 SR1 = SP 9.
Until SP 9 to activate a BPM in cache you need an access key (which can be requested from SAP), An access key is needed to create/change the custom programs. SAP realized that BPM is not a program rather it is configuration they corrected it with OSS Note 708338.
To apply the note, you have to configure the OSS1 transaction and go to SNOTE transaction and apply the note.
regards
Shravan

Error from BPE Adapter using in Async Sync scenario

Hi,
I'm trying to use a Asyn Sync pattern with BPM:
1)File adapter get a file from AS400, split it several XML messages and send to XI(Async)
2)XI get each message and forward to BPM using XI adapter
3)BPM has to send the message to R/3 via BAPI (Sync)
4)R/3 reply the result message to BPM(Sync)
5)BPM has to send the result message to e-mail system if an error had occurred in BAPI call (Async)
When I send directly from File adapter to R/3 works like a charm, but when I want use the BPM, a soap header error says to me, that cannot identify a data type that Im using in the message sent by File adapter.
The error that I'm getting is BPE Adapter UNKNOWN_MESSAGE in soap header.
Regards,
Eduardo

I got the same problem after installing new patches.
This is what I had to do:
Go to SXI_CACHE
- Choose Business Processes
- select your Buisness Process
If your buisness process has Return Code 99
- Click "Repeate Activate" button
- On the next screen, click Activate again.
This worked for me. Good Luck!

BPE adapter : message not used by any process

hi frnds,
I've created 2 scenarios using BPM
1) merge scenario: 2 msgs ==> BPM ==> 1 msg
1st msg is going without any problem. but 2nd msg is giving error saying 'BPE ADAPTER ERROR: message not used by any process'. i checked in sxi_cache and found that return code for Intg'n process is 0 only. but still i tried reactivating. but no use
2) split scenario: 1 msg ==> BPM ==> 2 msgs
sender msg is going without any problem,but not receiving 2 rcvr msgs to the target directory. return code of IP is 0 and no other errors.
after installing PI on my system, for the first time i'm trying BPM scenarios. simple file to file working properly. BPE adapter has to be activated manually or i missed any initial configuration??? pls help me to resolve this.
thanks.

abhishek,
I have used the following steps in BPM for this scenario xml file ==> BPM ==>xml file
1) data types: a)send_dt
                        b) rcv_dt
2) msg types a) send_mt
                        b)rcv_mt
3) interfaces   : send_ob_im
                          send_abs_im
                          rcv_abs_im
                          rcv_ib_im
in integration process,
start ==> receive ==> send ==> stop
so in general its like,
send CC ==> send OB I/F ==> send ABS I/F ==> rcv ABS I/F ==> rcv IB I/F ==> rcv CC
when i'm not using BPM, outbound queue SMQ1 is empty and messages are not stickking up there. but if i use BPM, SMQ1 is having entry saying 'SYSFAIL'. for the first time i'm doing the BPM scenarios.
thanks.

Error on file adapter (GENERAL_ERROR on XI_J2EE_ADAPTER_XI_HANDLER )

Hi Experts,
I have just configured a sender file adapter with content conversion in a PI 7.0. I will try to explain the problem:
1. I put the text file on the selected folder, to be taken.
2. The file is taken from the folder and archived in the archive folder.
Until here everything works fine, but from here:
- I can't watch the message in the sxmb_moni
- I can watch the message in the message monitoring in the Runtime Workbench. Here I can even see the XML well formed(the text file have been processed correctly)
The error log:
Message Data
Attribute Value
Engine Adapter Engine
{Status System Error
Repeatable Yes
Cancelable Yes
Error Category XI_J2EE_ADAPTER_XI_HANDLER
Error Code GENERAL_ERROR
Does anybody know where will be the error?
Regards
Gonzalo

Hi,
please check the following links related to your error category.
File (xml)>>xi>>IDoc
Problem in JDBC Reciver Channel
Problem in Webservice -> XI -JDBC
regards
mahesh.

File-IDoc scnario : Error in call adapter

Hi Experts,
I have developed File to IDoc scenario. And getting the following error in "Call Adapter" pipeline step. I have mapped the control record values in IDoc like Sender Partner, no, port and same for receiver.
Have created:
In XI: RFC destination to connect to ECC (sm59)
Port for the above RFC sestination (idx1)
In ECC: New logical system for source file system (BD54)
Partner Profile for Source (we20)
Also in Receiver_IDoc_CC, checked options for 1. Apply control record values from payload 2. Take Sender and Receiver from Payload
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPEAQ_100, client , RFC destination contain errors</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Transaction IDX1: Port SAPEAQ_100, client , RFC destination contain errors</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please tell me if i am doing any mistake.
Br,
Nilz

Hi,
Adding to Björn
Check the Port ( Tcode - idx1 ) Port SAPEAQ_100 & Select the Business System where you declared IDOC adapter -go to - Service and check whether you have mentioned the right Logic System,System ID & Client.
Cheers
Agasthuri Doss

BPM Error Permanent Error in BPE inbound processing

Hi
I require some urgent help on this BPM issue.
We are trying to integrate SRM PO being directly sent to Vendors using HTTP. We are getting an error saying Permanent Error in BPE inbound processing. The scenario works like this.
SRM system would sent PO using the SRM Standard interface PurchaseOrderRequest_Out. We need to transform the message into cXML format and send it to the vendors using HTTP adapter. Using the HTTP response we need to trigger an email to the business process team.
The SRM interface is under the software component SAP SRM Server 5.5 and our mapping is being done in a common software component and for the vendor interface we have another software component. We have created a relationship in the SLD by making the common SWC as dependent software component to SAP SRM Server and Vendor Software Component. So in the integration repository we are able to get the interfaces for the SAP SRM Server and Vendor Software Component under the common software component. The receive step for this BPM is a copy of the standard SRM interface PurchaseOrderRequest_Out(as the standard interface is an asynchronous interface) and we would require an abstract interface for the BPM. We have checked the semantics for the BPM and its fine. The related ID development is in place. When the message is being triggered, it gives us this above mentioned error. When we go to the QRFC monitor we are able to check the details.
Regards,
Indranil

Hi Indranil,
     You don't see you BPM....
First go to SXI_CACHE and check that your BPM is listed there and that the compilation has been completed succesfully.
Is this the first time the BPM is being used? If so check if has been configured. For example, go to RWB->Component Monitoring->BPE in <SYSID>
and check if any error is listed there.
In order to check what is going on in your BPM you can trace it:
                  SXMB_MONI_BPE->Diagnosis Processes with Errors
                  SXMB_MONI->Process, get your msg and click on 'PE'. You should see the workitems and see if there is any error.
         Hope this helps you....
         Regards,
            Encinas.

Error in File Adapter: no alert generated

Hi folks,
I have a problem with monitoring our file adapters.
In one scenario we occasionally get the following error:
Fehler bei der Konvertierung des Dateiinhalts in XML an Position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'eTSFlatDetailStructure':java.lang.Exception: ERROR in configuration / structure 'eTSFlatDetailStructure.': More elements in file csv structure than field names specified!
So I have build an alert category with me as recipient and an alert rule in Runtime Workbench with the following attributes:
- Rule active
- Alert-category as I have created above
- Bound to Message: no
- Error occures in Adapter Engine -> File Adapter
I have tested the Category... it works... but the rule does not fire any alert.
Has anyone an idea how to solve this problem?
Thanks
Greetings
Habib Sarbas

Hi,
the report generates following output:
20090507072803,7018210          0 07.05.2009    09:28:03      0AFE24F09F47460132CAD06697A18964
*Error records received from AF on host rd-srxt0_RXT_00 (sysid: RXT client: ). Try to send Alert...
20090507072803,7045260          0 07.05.2009    09:28:03      0AFE24F09F47460132CAD06697A18964
*Find rule for (From:vkeTSFlatBPM:vkeTSFlatBPM_var01_eTSSender:mi_eTSFlat_var01_out_asyn:urn:rsd-de:xi:ZRSD_XI_01:vkeTSBPM To::::)
20090507072803,7063530          0 07.05.2009    09:28:03      0AFE24F09F47460132CAD06697A18964
*No matching rule found
I also tried to specify the conditions with service, interface and namespace, but this is only possible if i switch bound to message to yes...
but the error occurs in file adapter... there is no message generated...

BPE adapter unknown message

Hi
I get an error in MONI" BPE adapter unknown message " .scenario is working fine in development system .And just now imported the configurations in quality system .
SXI_CACHE RETURN CODE IS 0
DELETED AND REIMPORTED THE PROCESS AGAIN
i have check transaction enabled for all teh steps in BPM in dev sysem ..Would it be a possible reason
and does it have any linkage to authorizations .. since I retransferred the change list to my name from some one else and activated but with no errros
Kindly advise on to resolve this error
Thanks
Anusha

i have check transaction enabled for all teh steps in BPM in dev sysem
Any specific requirement to do this?....if no then remove the checkbox entry....just the Start Process checkbox should be enabled for the first step (receive step)
Regards,
Abhishek.

Permanent error in BPE inbound processing

Hi all,
We have recently migrated are XI scenarios to a new server.
In one of the file to rfc scenario whenver a file is processed i get the error in smq2: Permanent error in BPE inbound processing.
The chances of BPM and mapping error are less as the BPM is working live in another server.
What could be the other problems.
REgards
Edited by: Vinithra Iyangar on Feb 26, 2009 10:36 AM

Dear Vinithra,
Its highly improbable for this error to occur because of transports going wrong. There is one more case which i am sure is the cause why you are getting this error.
"This behavior is when we place the files in the respective folders both the files are picked up by the file adapter. Process instance is generated for BPM. First receive step is encountered and the file is received by it. But due to the wait step the second receive step is not open and hence the second file cannot be delivered to it. Unlike the first case, in this case as the buffering is deactivated the file is not buffered and hence the inbound processing of BPM fails for the second receive step."
Please check if something like this is happening.
Refer : /people/milan.thaker/blog/2008/07/04/delivery-modes-in-bpm
Rgds
joel

Error Category      XI_J2EE_ADAPTER_XI_HANDLER

Hi
A couple of days we had problem in our Xi production server & we were unable to login into the server.
During that time the messages which got picked up from FTP went into Adapter Engine System Error.
Our Scenario is File to Idoc.
When I try to resend those messages through RWB its giving through PIAFUSER its givig wrong user id or password. Although the user id & pwd is correct.
Message Data
Attribute     Value
Status             System Error
Repeatable     Yes
Cancelable     Yes
Error Category      XI_J2EE_ADAPTER_XI_HANDLER
Error Code     GENERAL_ERROR
Start     12.08.2011 02:35:50
End     12.08.2011 07:08:59
Sender Party
Sender Service     CLMS
Receiver Party
Receiver Service
Interface     http://srl.in/clm_outbound
SRL_MI_CLM_SALES
Quality of Service     Exactly Once
Message     cf1c6b31-b3ed-45cb-08da-ebcbc1de3906
Reference
Conversation ID
Version     0
Edited     No
Serialization Context
Direction     OUTBOUND
Message Type     Send
Profile     XI
Connection     File_http://sap.com/xi/XI/System
Transport     HTTP
End Point     http://srlxiprd:8000/sap/xi/engine?type=entry
Authorization     SAPPasswordCredential(PIAFUSER):password=********:sapclient=900:saplang=
Sequential Number     0
Number of Retries     3
Failed     4
Retries     300000
Valid to
Persist Until     11.09.2011 02:35:50
Schedule Time     12.08.2011 06:22:55
Please give your valuable suggestion as I have lots of messages in system error.
Thanks

User XIAFUSER/PIAFUSER could have been locked.
Check the exchange profile and transaction SU01; try to reset the password.
Restart the Java Engine to activate changes in the exchange profile.
Regards
Pothana

" SYSTEM ERROR" with ERROR CATEGORY: Message and ERROR ID : GENERAL

HI all
I m doing JDBC -> XI -> SOAP -> XI -> FILE ( XML) scenario .I have implemented it using BPM .
But ,In MONI , i am getting a "SYSTEM ERROR " with "ERROR CATEGORY : MESSAGE" and "ERROR ID : GENERAL" .and
One thing more is there my all adapters are active (JDBC,FILE) in runtime workbench but SOAP adapters i am not able to see it there as its services are not defined in there .Is this problem is because SOAP adapters are not defined in runtime workbench ?

Hi Colin
I are using SP 3.0
I have checked the Communication channel monitoring and Adapter monitering also but in mine case when i want to see the SOAP adapter in adapter monitoring , the SOAP ICON is disabled there ,so i am not able to see whats the status of my SOAP adapter i have used in my scenario
Thanks and Regards
Abhishek

Error-Receiver File Adapter using Variable substitution when file is empty

XI Experts,
We are on PI 7.0, SP14.
We are using variable subtitution to get the filename from source message. This works fine as long as we have data in the payload for filename element. But we have a scenario where we don't have to create file when certain condition does not exists in source message so in the message payload filename element will not exists in such condition and file will be empty and we should not create file.
Parameter in the communication channel for Handling empty message is "Ignore".
Does anyone knows how to handle this scneario. We don't want to default any file name in the message mapping if source file name element does not exists.
We are following getting error in the Adapter engine.
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: file: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: file
Thanks
MP

You can implement this by writing the module to throw an exception or whatever method you want to execute.
If you don't want to receive an error message then module is suitable for you.
Gaurav Jain

Error:SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to read request. --- There is an error in XML document (1, 447). --- Input string was not in a correct format.

Hi All,
We have a scenario of FTP-->PI---> Webservice. While triggering the data in the FTP, it is failing in the PI with the below error
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to read request. ---> There is an error in XML document (1, 447). ---> Input string was not in a correct format.
Can you please help?

Hi Raja- It seems to be a data quality issue.
Check for the value @ 1447 position in the xml message that you are trying to send to web service..
may be a date filed/decimal value which is not in expected format.

Error Category: BPE ADAPTER???

Similar Messages

Maybe you are looking for