Error: cc1obj: out of memory allocating 1130584464 bytes after a total of 0

hi guys : )
I have a weird bug. It's a compile time error but only happens when i compile in release config. when i compile in debug mode, my app runs perfectly. when i compile in release mode (even to simulator) i get this error:
cc1obj: out of memory allocating 1130584464 bytes after a total of 0 bytes
Command /Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/gcc-4.0 failed with exit code 1
any one else seen this?

the file was too big : )

Similar Messages

Error 500 Out of Memory on x64 bit machine

Using windows vista 64bit business
x64 bit machine 32 bit application
using visual fox pro odbc driver
Happens on Crystal reports 8 and 10
After 3+ million records with our query we receive an Error 500 out of memory.
Under windows 32bit machine, we haven't encountered this issue regardless the size of data.
Any thoughts?

Hi Alex
As mentioned earlier Crystal Reports 9 and 10 are not tested platfrom with Windows Vista.
Try using Crystal Reports 2008 and check if you are facing any issues.
Hope this helps.
Please let us know if you have any further queries.
Regards
Ashwini Yadav

Run-time error '7': Out of memory - Cisco Clean Access problem

Hi all,
I hope this question is in the appropriate place. I'm trying to use my company's vpn service. Here's how the process should work:
1) Log on with username/password using Cisco AnyConnect VPN Client
2) Log-in to the portal. During this step the Cisco Clean Access Agent is supposed to automatically log-in. However I get the following error:
Run-time error '7':
Out of memory
My company's network services didn't seem to be much of a help so I was hoping one of you would have a good suggestion(s).
Please keep in mind that I'm not great with computers. I know how to use them and all that but I'm not familiar with the inner-workings at all (registry editing etc.)
Thanks in advance!
-Bill

I should add that the version of CCA is 4.1.10

Encountering with the error Client out of memory in Bex. . .

Hello All,
In the Bex report when I run for the 2000 sales organization selection the initial display is coming fine. When I try to drill down to the next levels in the result, I am encountering with the error 'CLENT OUT OF MEMORY'.
The report is displaying sales document level data. I need to drill down on almost 6 fields like cost element, Profit center. Auth group, Cost center, Customer number... Up to 7 attributes.
I am able to drill down up to 5 attributes when i try to drill down on the 6th one, the report ended up with this error.
Note: I am able to run the report for remaining sales orgs and can drill down on all the fields. Might be because of huge data not able drill down on 2000, not sure
Any one could help me on this.
Thanks in Advance,
Lakshmi.

I checked in the infoprovider level.
For the same selection, we have around 450000 of cells.
Thank you,
Lakshmi.

C-runtime error occured "Out of Memory"

Cannot display the selected records when an end user clicks the (>*) button next to the record count. Instead of displaying all the records based on the prompted selection criteria, the record count (28,338) is shown by itself without the data after a few minutes of waiting. Above the record count and selected prompts, "!error: A C-runtime error occurred (Out of Memory)" is shown twice. No data.
So long as the end user does not click the (>*) button next to the record count, everything works okay. End user can download the entire set of selected records to a tab-delimited .csv file without any problem. End user can also scroll thru the 28,338 records, one page at a time. Using more restrictive selection criteria, I can view several thousand records at a time. No problem until the (>*) button is clicked when 28,338 records are requested.
We recently doubled the memory on our desktops from 1GB to 2GB. No help attempting to display all records.
Problem reproduced at will in both OBIEE 10.1.3.3.2 and 10.1.3.4.1 environments using either IE 8.0 or Firefox 3.6 on Windows XP Pro.
How can we reconfigure our environment to display the 28,338 records on a desktop without running Windows XP out of memory?

The C:\OracleBIData\tmp directory on the desktop appears empty before, during and after the query.
In addition in Windows Task Manager, the Networking tab for the Local Area Connection shows a steady, but less than 0.5%, activity stream for the duration. CPU use and paging is also minimal.
Edited by: bobatx on Dec 23, 2010 10:04 AM

How do I fix Error Message = Out Of Memory Could Not Install or Delete Data"

I have looked all over the internet and there is a lot of discussion about WHY this happens and a lot of discusion about what to do in the future to avoid this from happening.
I need help with specific steps on how to delete the static image that is stuck on my desktop. The image is large and covers most of my screen. I have shut down, unplugged, let the machine rest....started up several times. Not working.
The error reads "OUT OF MEMORY - COULD NOT INSERT OR DELETE DATA"
Thanks!

Probably you are running out of disk space. Can you interact with your Mac at all, or is the error message preventing you from using Finder windows?
I'd try to boot into Save Mode: This will only load a rudimentary version of Max OS X, needing less space, and will clean some caches. The Start Up will tale longer, however.
When in Save Mode try to empty the Trash and to free as much disk space as you can, by deleting files.
How much free disk space do you have right now?
See:
http://www.wikihow.com/Start-Your-Mac-in-Safe-Mode
If you cannot access the FInder to free disk space, even in Save Boot Mode, post back.
Regards
Léonie

After Effects Error: Keylight out of memory (4)

After Effects CS4 keeps crapping out on me, and won't allow me to render my projects. I keep getting the message, "After Effects Error: Keylight out of memory (4)"
I'm running a brand new IMac 3.4 GHz Intel Core I7 (which I understand gives me virtually 8 cores), and I have 8 GB of Ram.
I've tried with multi-frame processing enabled, and dissabled and the same thing. When I tried with the mulit-frame enabled I selected allow 4 CPU's Free and allow 6CPU's free, and still the same results. Any help would be greatly apprecicated.
Thanks!

Since you run AE 9, it's probably your footage. Okay, it's the most likely cause, at least. Here's a copy 'n paste response I used to use a LOT on the Creative COW:
Dave's Stock Answer #1:
If the footage you imported into AE is any kind of the following -- footage in an HDV acquisition codec, MPEG1, MPEG2, AVCHD, mp4, mts, m2t, H.261 or H.264 -- you need to convert it to a different codec.
These kinds of footage use temporal, or interframe compression. They have keyframes at regular intervals, containing complete frame information. However, the frames in between do NOT have complete information. Interframe codecs toss out duplicated information.
In order to maintain peak rendering efficiency, AE needs complete information for each and every frame. But because these kinds of footage contain only partial information, AE freaks out, resulting in a wide variety of problems.
I'm a Mac guy, so I like to convert to Quicktime movies in the Animation or PNG codecs; both are lossless. I'll

Error #3121 out of memory

ＨＴＭＬ形式で書き出しでエラー「error #3121 out of memory」が出ます。
原因と解決方法を教えて下さい。

これ迄、ＨＴＭＬ形式で書き出しでエラーが出た事は無かったですが、「error #3121 out of memory adobe muse」で検索したところ、下記を見つけました。
Adobe Muse crashes when i make a right mouseclick in the element library
<BB68E8CC-422F-3121-8C86-D0F766FB696D>とあります。
http://forums.adobe.com/message/5920753
Google翻訳（http://translate.google.co.jp/）で見ました。
内容が難解でよくわかりませんが、OS 10.9をお使いですか？
内容としましては、スタッグの方の回答を期待するしかないです。

Error 21 - Out of Memory

Already created file, attempting to modify. Receiving "Error 21, Out of Memory" message.

Hi Don ,
Could you please provide me with with some more details about the PDF and the Acrobat version?
What version of Acrobat are you using ?
What kind of PDF is it?
What version of OS are you using?
Try deleting the temp files and see if that helps.
Try modifying any other PDF and compare the outcome .
Regards
Sukrit Dhingra

"Assembly Error. Out Of Memory"

I am burning a 5 Disc set for someone, and when I burn disc 3, I get this message during the burning process: "Assembly Error. Out of Memory". Then a little while later the program turns off on its own.
This is only happening when I burn the 3rd disc. When I burn discs 4 and 5 it works just fine, and they are all approximately the same size...
Any idea what can be causing this? Thanks!

OK, let's look at both the Audio and the still images.
For the JPEG's, what are the dimensions (pixel x pixel) of these? Large stills can cause a myriad problems and if much larger than the Frame Size of the Project, will suffer a quality loss. Bigger is NOT better here.
This ARTICLE will give you some background and an automated way to prepare them for use in PrPro.
For the WMA, are these perhaps multi-channel files, like 5.1 SS Audio?
First, I would look at doing a Render/Replace with these, and test. This will convert them to PCM/WAV 48KHz 16-bit Audio. If that does not allow you to build your DVD, then I would use Audition, or Soundbooth (or even the free audio-editing program, Audacity) to convert to PCM/WAV 48KHz 16-bit. Depending on which version of PrPro you have, you should have Edit in Soundbooth, or Edit in Audition, when you Rt-click on one of the WMA files. That would be my first choice. Test.
Good luck,
Hunt

DB error - Ran out of memory retrieving results - (Code: 200,302) (Code: 209,879)

I am encountering an error while running a big job of about 2.5million records running thru the EDQ cleansing/match process.
Process failed: A database error has occurred : Ran out of memory retrieving query results.. (Code: 200,302) (Code: 209,879)
The server has 8gb memory with 3gb allocated to Java for processing. I could not see any PostgreSQL configuration files to tune any parameters. Need some help with configuring the PostgreSQL database I guess. Appreciate any suggestions!!

Hi,
This sounds very much like a known issue with the latest maintenance releases of EDQ (9.0.7 and 9.0.8) where the PostgreSQL driver that we ship with EDQ was updated to support later versions of PostgreSQL but has been seen to use huge amounts more memory.
The way to resolve this is to change the PostgreSQL driver that ships with EDQ to the conventional PostgreSQL version:
1. Go here PostgreSQL JDBC Download and download the JDBC4 Postgresql Driver, Version 9.1-902.
2. Put this into the tomcat/webapps/dndirector/WEB-INF/lib folder
3. Remove/rename the existing postgresql.jar from the same location
4. Rename the newly downloaded driver postgresql.jar
5. Restart the 3 services in the following order: Director database, Results database, Application Server)
With this version of the driver, the memory issues have not been seen.
Note that there are two reasons why we do not ship this driver as standard, so you may wish to be aware of the impact of these if you use the standard driver:
a. Drilldown performance from some of the results views from the Parse processor may be a little slower.
b. There is a slim possibility of hitting deadlocks in the database when attempting to insert very wide columns.
Regards,
Mike

HP LaserJet 2100tn, Error message: "out of memory"

When I'm printing, an error message appears after printing the first page: "out of memory". My printer has 40MB of memory. I tried to change the printer settings for several time (8MB RAM, ..., over 30MB), but no result. The pages I want to print are from FileMakerPro.
I tried also to make a pdf file and to print, same result: first page o.k. then error message.
Thanks a lot for your answers.
Tobi

Meg: You are an earth angel You have come to my recue before.
Yikes...I found one sneaky b&w drawing .tiff that was 12621 x 966.
Will convert that puppy.
Thanks

Error message: 'Codec not found. You may be using a compression type without the corresponding hardware card' - then - 'Error. Out of memory'

Hi all. This is a new error I've never seen before.
It's stopping me doing anything at all really.
As soon as I start up FCP and click on a sequence I get this message: 'Codec not found. You may be using a compression type without the corresponding hardware card.'
Then I click on OK and it says 'Error - Out of memory.'
I've heard rumours that it could be the fact I'm using a strange type of JPEG, but it still happens with PNGs.
I've made sure my scratch disks are all going to the right place. I also have 100gb of free space.
The version of FCP I'm using is 6.0.5. I'm using an iMac with OSX 10.4.11 (yes, I know it's old!) and I've downloaded the latest version of Quicktime.
Help, anyone? I have an assignment due in tomorrow.
Many thanks...

p.s. having looked at other posts, perhaps I am missing some (or all) of the relevant codecs?
In the folder Macintosh HD > Library > Quicktime
there is basically nothing. Do you think this is the problem?
If so, where do I download FCP codecs from?
Many thanks..

"File Error" and "Out of Memory" when rendering FCE

Dear all,
I imported a 2 hour holiday video into FCE.
When rendering the video, a message appears that the rendering process will last about 15 minutes to complete.
However, frequently I am warned by the following message:
"File Error: The specified file is open and in use by this or another application"
When activating Rendering again, the render time is now increased to about 45 minutes.
I now either receive a couple of times the message: "File Error: The specified file is open and in use by this or another application" >>or even worse: "Out of memory"<<.
Today I purchased an addition 2GB of memory to increase my memory form 750 MB to 2.5GB !!!
Can anyone please tell me what could be the cause of these messages and how to solve them?
BTW, no other programs are running while I use FCE.
Thanks in advance,
Hans E.<br>
PowerMac G5-Dual 1.8GHz, Memory 2.5GB, iMac G3-600MHz, Airport, Airport Express Mac OS X (10.3.9)
PowerMac G5-Dual 1.8GHz, Memory 2.5GB, iMac G3-600MHz, Airport, Airport Express Mac OS X (10.3.9)
PowerMac G5-Dual 1.8GHz, Memory 2.5GB, iMac G3-600MHz, Airport, Airport Express Mac OS X (10.3.9)

Is it happening when you're rendering, or exporting?
The error message means FCE is trying to rewrite a file that it is currently using. It could be mistakenly trying to save a render file, if you're only rendering, or if you're trying to re-export a file, you'll get that message.
Try dumping all your render files, restarting FCE and trying again.
The Out of Memory error almost always points toward a corrupt file. Could be a source file, could be a render file. Again, dump your render files and try again.
If these don't work, you need to close FCE, take all your source media offline, then open FCE. Now, reconnect each clip one by one until you find the corrupt clip. Keep going, there may be more than one. Re-capture the corrupt clips and you should be good to go.

Final Cut Pro 7 error message (out of Memory)

I have an 8 core 6 gigs of ram. My mac is configured for HD video using XDCam footage.
I get a message that I am out of memory. 26:30 program and I have a lot of filters on my footage.
Can you tell me how I can release my memory? Conrol Command P R?
Can some help me with this?
Steve

I have a few times ... strangely enough, when rendering to another internal drive with plenty of space, but the boot drive was 98% full (not my system). When you have too little free space on the boot drive (which the system uses for temp and swap files), all sorts of wonky things start happening, and not just in FCP so I suggested checking that since MtD had already covered the graphics issue.
But you are correct; the error message is usually the result of importing an improper file format or still image not to proper specs. With still images, it can happen not only with CMYK color mode images, but also with images in Grayscale or Indexed color modes.
-DH

Error: cc1obj: out of memory allocating 1130584464 bytes after a total of 0

Similar Messages

Maybe you are looking for