Error: Change to balance sheet control in spite of postings. Plz..... Help

Hi Gurus
When I change a GL account from P&L to BS account, I am getting following error.
"Change to balance sheet control in spite of postings
The data contains error, you cannot save."
There were some postings in this accounts. Today I reversed all the docs, so the account balances are now zero. However, the system still won't allow me to change the account from a P&L to a BS account.
Plz help.
Thanks
PrinceOfLight

If the G/L account was already posted in the previous year, execute the balance carryforward again for the current fiscal year. (program SAPF011).

Similar Messages

General ledgar A/C change from Balance sheet to P&L

Dear all
i have one requirement, we have one GL a/c is there As a Balance sheet item it is showing in asset side in FSV,
I want to change into p&l a/c alonge with balance in income side. then it should show in the income side
ple give me replay ASAP
thanks
ravi
Edited by: bikkina.prakash on Sep 1, 2011 1:05 PM

Hi,
If you don't want to create new account for this
1. Pass an adjustment entry to make the account balance zero.
2. Change the status from B/S to P&L
3. Repost the entry into GL account
Rgds
Murali. N

Error msg in Balance Sheet - asking for SQL username and Password

Hi experts,
I have observed strange behaviour of SAP B1 8.81 PL 07 in following way.
On one client PC when I preview standard SAP CR Balance Sheet it asks for SQL user Id and password.
Where as on the same PC, when I select Vertical option to preview Balance sheet, it works fine. This happens on few PC only, On server it shows both balance sheet option correctly.
any Idea ?
Thanking you in advance,
Samir Gandhi

Hi Palak.......
I would suggest you to please Make a new connection of CR with OLE DB SQL Server and then reimport it.......
And then try to take a preview.....
Regards,
Rahul

HT201210 im trying to restore my iphone 4 but getting error message as could not be contacted or temporarily unavailable plz help

im trying to restore my iphone 4 but getting error message as could not be contacted or temporarily unavailable plz help

Hey santhosh.pv,
We have a few articles that can help troubleshoot the alert message in iTunes you see when you are trying to restore your iPhone 4. You can resolve many restore issues using the troubleshooting steps documented here:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
The next article is the companion of the more general article above. Follow the above article first. If, after following that article, the issue persists, continue with this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Cheers,
David

Error message while trying to download Itunes for Windows Vista.plz help!

I've been trying to install itunes 9 on windows vista system. During the install, it says "error occurred during installation of assembly policy 8.0.microsoft.vc80.CRT, version 8.0.50727.403 type win 32 policy public key token=1fc8b3b901e18e3bprocess architecture=x86 Quicktime installs OK, but Itunes install is interruped -- Apple Support install portion is rolled back after this error pops up. I went thru suggested Apple troubleshooting options, got same error. Ran install as administrator from desktop, also did not work. Tried installing both thru apple software updater and directly from Apple website -- still get error. I am also having trouble downloading new updates for my computer, has anyoone exp this?? I am so frustrated, I have a new nano and can't use it

Interesting.
Okay, let's try some general principles troubleshooting with this one, then.
(1) Do you currently have a copy of the Microsoft Visual C++ 2005 Redistributable Package installed on that PC? If so, try downloading the following security update:
[Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update|http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-4 0ff-b072-9112bab119c2&displaylang=en#filelist]
Does iTunes install for you after applying that update?
(2) If no joy there, head into your Windows Update and click on the Update History. Have a lot of Updates also been failing for you recently? If so, doubleclick on the entries for the failed updates to bring up more information on each. What error codes appear for you for the failed updates? (Precise spelling, please.)

Error in transport while importing in my BI production.. plz help

Hi ,
I have a strange issue when I am trying to import a transport in my BI production with options as "Overwrite Originals" & "Overwrite Objects in unfinished repairs".
In Quality there is no issue present with the transport but where as the same failed in production with the below error message.
in STMS:
Program terminated (job: RDDEXECL, no.: 15232100)
With the return Code: 12.
When I look at the log of the job: here is the summary:
ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC the logs shows that it has failed with the this error (dump) message.
I have searched for OSS notes and other information but still there is no update on this kind of issue.
Thanks
Ashwini

Hi,
In Production server goto STMS_IMPORT and tehn Identify the RED request and then goto Log and see the details and find the reason and correct it and again transfort the dependencies first then transport this object.
Note: Transports basically fails, because of its dependencyies are not present in Production, so first Transport the dependecies then transport the main obejcts.
Don't mix all obejcts in single request.
First Transport the Package then
1. InfoObejcts.
2. Cubes, DSO's
3.DataSources from ECC Dev to ECC Qty
4. DataSource Replication in BW Qty
5. InfoSources.
6.Transformations in between DataSource and InfoSource.
7.Transformations in between InfoSource and InfoCube/DSO.
8. DTP's & InfoPackages.
9. Multiproviders/InfoSets.
10. Reports.
Thanks
Reddy

N73 phone having a fatal error..........plz help

Its having a fatal error.backlight remains on continuously,phone memory is empty but then too it shows memory full,cant chane profile,cant open msgs,no call log,cant delete anything,cant open clock,cant open gallery....what to do?

Its having a fatal error.backlight remains on continuously,phone memory is empty but then too it shows memory full,cant chane profile,cant open msgs,no call log,cant delete anything,cant open clock,cant open gallery....what to do?

Error:Could not find binding for QNameProperty - in WLS 11g-Plz help!!

I have a WSDL containing complexType and simpleType. I generate the webservice from wsdl using JAX-RPC.
When i deploy it in WebLogic 11g I get the error: Could not find binding for QNameProperty substringType :
<xs:complexType name="SimpleTerm">
<xs:sequence>
<xs:element minOccurs="0" name="entityConstraint" type="xs:string"/>
*<xs:element minOccurs="0" name="substringType" type="S5:substringTypeSimpleTermEnum"/>*
</xs:sequence>
</xs:complexType>
<xs:simpleType name="substringTypeSimpleTermEnum">
<xs:restriction base="xs:string">
<xs:enumeration value="beginswith"/>
<xs:enumeration value="endswith"/>
</xs:restriction>
</xs:simpleType>
My Observations:*
If i remove the simpleType's i dont get any error.
If i generate webservice from the same wsdl using JAXWS then the project gets successfully deloyed in WLS11g.
Kindly help me in solving the problem using JAX-RPC.
Edited by: 939488 on Jun 8, 2012 3:13 AM

HI,
Seems known issue. I would suggest to raise an Service Request with the test case.
GD,
Ashish

Volume control device wont come on plz help me

i have a problem BIG problem with my volume control. i cant get the green light to light up on the volume control for some reason. the subwoofer itself still works cuz i took it apart and hooked it up to another speaker system that i have and it worked perfectly. i think it might have to do with the board inside with the subwoofer. i tried to wiggle the wires a bit to see if there was a shortage but that didnt seem to be it. its not the fuse either cuz i replaced it and nothing still happened. i dont really know so if someone would help me out i would really apprieciate it.
Message Edited by KA-Pow on 04-01-2005 08:47 PM

KA-Pow,
No green lights on volume control means no power. My guess would be either the volume control or the power adaptor that's probably faulty since you have mention testing the subwoofer and it's fine. I would think it's more on the volume control. You're best off contacting support to have it repair.
Jason

Change GL Account Type from Balance Sheet Account to P&L Statmt Account

Hi Experts's
We have mistakenly defined the GL account as type Balance Sheet Account type and Some postings are done on this GL, we need to change it to P&L Statmt Account, When we do that it's throwing message FH602, as below.
Change balance sheet control in spite of account balance
     Message no. FH602
Diagnosis
     You have changed the G/L account from a "balance sheet account" to a
     "P&L account" or conversely.
     The balance of the account is, however, not zero.
Procedure
     Check your entries.
     If the G/L account was already posted in the previous year, execute the
     balance carryforward again for the current fiscal year. (program
     SAPF011).
Please let me know the procedure to do this change, or do i have to run any report.
Thanks

HI
If you are mid-year please try this:
Balance sheet having 10000 credit balace
try to post like this manually
Balance sheet account dr 10000
to Profit and loss account 10000
now tick the Profit and loss account and reverse the entry
try this in test environment first
Thanks & Regards
Phaneendra

Condition type for fee - no change of moving price or balance sheet account

Hi, hope you can help me.
We need a new condition type for a kind of fee which has to be paid to the vendor and used in the purchase order.
This is a condition type which
- has to be part of the invoice
- has to be posted as a kind of accrual
- must not! change the price of the material or the balance sheet account
If we use freight conditions the moving price is changed.
Because it is dependent on the material (and therefore a condition record works great) we can't or better don't want to use a second position in the purchase order.
Does anybody have a solution for this one?
PC

Thanks for the answer!
This is what I already tried, but it still changes the balance sheet account and the moving average price.
This is what I customized:
Condition ZXYZ
Cond. class A
Calculat.type C
Cond.category B
Item condition yes, delelte, amount/percent and Qte relation yes
Scale base C
Accruals yes
In the Calculation Schema it's defined just before the Actual Price, with Statistical-checkbox marked and Account key ZE1, Account key - accruals / provisions ZE2.
Do you have any idea what I have to change or what else to try?
Thanks a lot!

Changes of CC (profit center) in master data and balance sheet side in PCA

HI
Organizational assignments are not managed as time-dependent in the asset master record.
We want to change the assignment to a cost center, which is in another PC.
The system then automatically run ABUM with appropriate standard transaction type as a default for the posting transaction.
Which standard transaction type is appropriate to reflect change in balance sheet side in PCA ?

The best for this is to use the transaction ABUMN - Transfer within Company Code and not to make the change with AS02

Balance Sheet Account saved as Profit and Loss Account now wants to rectify

Dear All,
Balance Sheet account wrongly created as profit and loss account, and it contains some entries in previous year and current year as well.
Now we want to rectify that error i.e. we would like to change the profit and loss account as balance sheet account (which is to be as Balance Sheet A/c.).
There is a program which is exclusively available for the same which converts profit and loss account to balance sheet account. If you know pl. let me know.
Waiting for your early response and thanks in advance.
Regards
anand.inguva

Hi ,
earliar also i have given same quation replay, possiblity is there for change GL account type.
When you tray to can change to Balance sheet account from FS00 screen u can get following error message
"Cannot change control of Profit and lossaccount (primary cost elements exist)
"The data contains error, you cannot save"
and if u open that message u can get the following message no.
"The data contains error, you cannot save
Message no. FH511"
it can not be save. so u comeback from fs00 screen
go to OBA5 and give the application are FH and enter, after that select new entries, select the drop down button select your message 511, in online column select W for warning and save.
then u can get the change.
please ensure that if you have not completed the year ending closing procedure the above shoul do..
but your case last year also some entries thre in that particular GL account, so u can not do the above method.
You cannot change the account type.
you need to block that gl account and crete a new GL
pass journals entries to transfer from old p&l gl account to new b/s account
please try it and come back me
assign points if it is useful,
If u find the solution close the issue and assign points.
thanks
sai Krishna

Message no FH017 Open item management only allowed for balance sheet accounts

Dear All,
i try to change one Balance Sheet account to P&L Account. However i failed changing the account.
it pops up the error Message no FH017.
For this error, i have already untick the Open Item Management
Can anyone help me on this? Very appreciated on this!
Cheers
Jill

Aslo see help on open Item managed field by pressing f1
Indicator: Open Item Management?
Determines that open items are managed for this account.
Use
Items posted to accounts managed on an open item basis are marked as open or cleared. The balance of these accounts is always equal to the balance of the open items.
Procedure
Set up accounts with open item management if offsetting entries are to be assigned to the postings made to these accounts. Postings to these accounts represent incomplete transactions.
Example:
A goods receipt/invoice receipt (GR/IR) clearing account should be managed on an open item basis so that you can check at any time whether invoices have been received for the goods received for an order.
Set up accounts without open item management if no offsetting entry is to be made against a posting to this account.
Examples
Accounts that are managed on an open item basis include:
Clearing accounts:
Bank clearing account
Payroll clearing account
Cash discount clearing account
GR/IR clearing account
Accounts that are not managed on an open item basis:
Bank accounts
Tax accounts
Raw material accounts
Reconciliation accountsThese are managed implicitly using the subledger open item function.Profit and loss accounts
Materials Management (MM) accounts posted with a posting key that has account type 'M'

Account Balance Sheet x Inventory Cube BW

Hi Gurus,
Need a cube o extractor with account Balance Sheet x inventory(materials).
I have 0FIGL_C10 0figl_c10 has all the accounts but not for material balance and 0ic_c03 have all the materials but not the balance sheet accounts, expense accounts only
Need your help
Regards

HI,
balance sheet is always combination of GL accounts. but you need the functional help for which GL accounts you can use in balcance sheet line items. ex: input material cost, utility cost these all are combination of GL accounts so functional guy will give you the list of GL accounts.
easy way is creating the heirarchy, since you have the heirarchy copy it and do the changes as per your requirement finaly in your report you just have the heirarchy and key figures are credit and debit etc
roconsilation alway with the combination of GL accounts. (take some GLA ccounts month wise or fiscal period wise and check in R3 and your BI data target)
Regards,
Chandra.

Error: Change to balance sheet control in spite of postings. Plz..... Help

Similar Messages

Maybe you are looking for