Error:Check port type name and ensure it is defined
Hi,
I have developed one ejb application by following the pdf
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/100e7b9e-d8ce-2a10-b986-c24acc3dd9ba
and while creating the ejb application in the demoesr1 in the ejbmodule>META-INF.......-->Caliculate.wsdl iam getting the following error message...
"'Caliculator' port type specified for the 'caliculator Binding' and the binding is undefined. Check the Caliculator port type name and ensure it is defined"
how to solve this error..
Thanks in advance
Thanks and Regards
Manohar
Hi Manohar,
just found your question and we are having the exact same problem. After creating the web service and implementing it, everything is fine. When I build the project, suddenly this error pops up.
It doesn't make any sense as the port type is there...
Did you find a solution? Please share it with.
Thanks and regards,
Tobias
Similar Messages
-
Lumira Login Error "Check the Server Name and Instance ID"
Dear Experts
I installed Lumira Desktop and was able to connect to the
HANA Server.
Later while I was working the software hanged and I had to
shut it down.
Now, after re-opening the software I receive error "Check the Server Name and Instance ID"
(though the server credentials are same as error and correct”
Any suggests on how to rectifyI wonder if one of the following KBAs may give you a clue?
1995325 - Error HDB 11009: The dataset could not be published to SAP Lumira Server because publishing to the SAP HANA layer failed. Lumira Server
2134259 - Lumira LaunchPad Logon Hangs
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter (#SAPLumira)
Got Enhancement ideas? Use the SAP Idea Place -
Help-Task not found - Please check the Task Type, Name and Location are cor
HI all,
i have upgraded my owb from version 11gr1 to 11gr2. the installation is complete and all my mappings and objects are imported successfully.
i was able to execute the mappings using the sql code:
@/oracle/product/11.2.0/owb/rtp/sql/sqlplus_exec_template.sql
by logging into sqlplus as the user in whose schema mappings are deployed.
hOwever, suddenly i am getting the error since sometime back - not sure what might have happened or what might have gone wrong. can someone please help me understand what might be wrong - how to decode this?
Here is my error:
@/oracle/product/11.2.0/owb/rtp/sql/sqlplus_exec_template.sql
Role set.
Enter value for 1: WSODS
Call completed.
Enter value for 2: ODS_SCHEMA
Enter value for 3: PLSQLMAP
Enter value for 4: MAPPING_1
Enter value for 6: ","
Enter value for 5: ","
Stage 1: Decoding Parameters
| location_name=ODS_SCHEMA
| task_type=PLSQLMAP
| task_name=MAPPING_1
Stage 2: Opening Task
begin
ERROR at line 1:
ORA-20001: Task not found - Please check the Task Type, Name and Location are
correct.
ORA-06512: at "OWBSYS.WB_RT_API_EXEC", line 759
ORA-06512: at "OWBSYS.WB_RT_SCRIPT_UTIL", line 910
ORA-06512: at line 2When i execute this: i get the result as follows:
SELECT warehouse_object_id, store_id, object_type_id, object_type_name, object_name FROM owb$wb_rt_warehouse_objects
where object_name = 'MAPPING_1';
WAREHOUSE_OBJECT_ID STORE_ID OBJECT_TYPE_ID OBJECT_TYPE_NAME OBJECT_NAME
15947 15325 769 PLSQLMap MAPPING_1
1 rows selectedEdited by: Chaitanya on Mar 5, 2012 3:33 AMHi Chaitanya,
Did you get any resolution for this error? I'm facing the same error while trying to execute OWB mapping through this command.
Any help would be much appreciated. Thanks.
Regards,
Jagari -
I am a PC user and I have Adobe Creative Cloud Muse 2014. I have received the 'Could not sign you in [Access denied: 530]. Check your user name and password' error when trying to upload my muse site to my ftp host, GoDaddy. I have successfully done this in the past and only recently it has stopped working. I looked online at the FAQ Adobe Muse Help | Uploading an Adobe Muse Site to a third-party hosting service and it said to download the ftpprefs.xml file but this file simply leads to a blank page that says /*Not found*//*Not found*/.
Can someone direct me to a working page with this file or provide a different solution? Thank you!Hello,
As you are getting error [Access denied: 530] it means issue is with access. Either the username and password you are entering is incorrect or you do not have proper permissions.
I would suggest you to contact Godaddy to either reset password or reset the permissions.
Regards
Vivek -
The following error pop's up as an [OK] dialogue box after logging in the iMac,
There was a problem connecting to the server "Time Capsule".
The share does not exist on the server. Please check the share name, and then try again."
As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
Any suggestions on how begin to work out how to achieve networking seamlesness?First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back. -
How to get the document type, name and revision from the search page cv04n
Hello,
After performing cv04n and getting a list of documents satisfying the search criteria, how can I then get the document type, name and revision of the selected document using ABAP?
ThanksHI,
IN table DRAW... u have Document type, Version and document number.
In Table DRAT also u get Document Type, Version, Number and Description of Doucment.
Regards
SAB -
Deleting Message Type name and namespace tag from XML payload
Hi Gurus,
Need help. My payload looks like this
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:MT_O_sss xmlns:ns1="http://sap.com/xi/tm">
- <Job>
<Field name="xxxx" value="" />
<Field name="xxx" value="" />
<Field name="xxx" value="" />
</Job>
</ns1:MT_O_sss>
But The soap webservice is expecting it in
<?xml version="1.0" encoding="utf-8" ?>
- <Job>
<Field name="xxxx" value="" />
<Field name="xxx" value="" />
<Field name="xxx" value="" />
</Job>
I have to remove the message type name and namespace tag.
So how can I achieve this. I am sending this payload using a Receiver Soap Adapter. Please help. I am kind of stuck.hi,
you have to simply add one module in your communication channel
that is XMLAnonymizerBean
you can refer below for help:
Remove namespace prefix or change XML encoding with the XMLAnonymizerBean
http://help.sap.com/saphelp_nw04/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/frameset.htm
hope it helps.
regards,
ujjwal kumar -
Hi,
I am getting the below error for JXDM when using. It was mentioned in http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6302524 that it is fixed. Still getting this error.
a) Appreciate if anyone can tell how to use the bug fix b20 that is mentioned in the above? I downloaded the latest jaxb 2.0 from this site and also from the jaxb RI(Reference Implementation and tried both).
b) Is there any workaround to get through this?
Will appreciate if any one can give advise on this.
************** Here is the error message ******************
There was this problem creating a context com.sun.xml.bind.v2.runtime.IllegalAnn
otationsException: 1 counts of IllegalAnnotationExceptions
Two classes have the same XML type name "usStateCodeType". Use @XmlType.name and
@XmlType.namespace to assign different names to them.
this problem is related to the following location:
at gov.ojp.it.jxdm.usps_states._1.USStateCodeType
at protected gov.ojp.it.jxdm.usps_states._1.USStateCodeType gov.
ojp.it.jxdm._3_0_2.proxy.usps_states._1.USStateCodeType.value
at gov.ojp.it.jxdm._3_0_2.proxy.usps_states._1.USStateCodeType
at protected gov.ojp.it.jxdm._3_0_2.proxy.usps_states._1.USState
CodeType generated.CjsAddressType.locationStateCodeUSPostalService
at generated.CjsAddressType
at protected java.util.List generated.CjsPersonType.personAddres
s
at generated.CjsPersonType
at protected generated.CjsPersonType generated.CjsSuspectType.su
spectPerson
at generated.CjsSuspectType
at protected generated.CjsSuspectType generated.CjsReportType.su
spect
at generated.CjsReportType
at public generated.CjsReportType generated.ObjectFactory.create
CjsReportType()
at generated.ObjectFactory
this problem is related to the following location:
at gov.ojp.it.jxdm.fips_5_2._1.USStateCodeType
at protected gov.ojp.it.jxdm.fips_5_2._1.USStateCodeType gov.ojp
.it.jxdm._3_0_2.proxy.fips_5_2._1.USStateCodeType.value
at gov.ojp.it.jxdm._3_0_2.proxy.fips_5_2._1.USStateCodeType
at protected java.util.List gov.ojp.it.jxdm._3_0.AddressType.loc
ationStateCodeFips52Alpha
at gov.ojp.it.jxdm._3_0.AddressType
at protected java.util.List gov.ojp.it.jxdm._3_0.LocationType.lo
cationAddress
at gov.ojp.it.jxdm._3_0.LocationType
at protected java.util.List gov.ojp.it.jxdm._3_0.OrganizationTyp
e.organizationLocation
at gov.ojp.it.jxdm._3_0.OrganizationType
at protected java.util.List gov.ojp.it.jxdm._3_0.BookingType.boo
kingAgency
at gov.ojp.it.jxdm._3_0.BookingType
at generated.CjsBookingType
at public generated.CjsBookingType generated.ObjectFactory.creat
eCjsBookingType()
at generated.ObjectFactory
Check this out
Exception in thread "main" java.lang.NullPointerException
at bpd.MakeNewItem.marshallItem(MakeNewItem.java:119)
at bpd.MakeNewItem.persistItem(MakeNewItem.java:112)
at bpd.MakeNewItem.<init>(MakeNewItem.java:31)
at bpd.MakeNewItem.main(MakeNewItem.java:137)
********************End of error message ******************
Thanks
Sat
Message was edited by:
sat_pIn Help > About > Properties:
sqldeveloper.oci.available = true -
BAPI error for mvmt types 201 and 202
Hi all,
I'm using a bapi BAPI_GOODSMVT_CREATE for the movement type 201 and 202 with the gm_code = '03' for the transaction mb11- Goods movement. But it returns an error u201D Account 400000 requires an assignment to a CO object u201D...I'm unable to resolve this one....I have attached the code below. Please help me in fixing this issue...
if sy-subrc = 0.
loop at it_mchb into wa_mchb.
if wa_mchb-clabs gt 0.
clear wa_header.
wa_header-pstng_date = sy-datum. " fill header data
wa_header-doc_date = sy-datum.
wa_code-gm_code = '03'. "fill code data
clear wa_item.
wa_item-material = wa_mchb-matnr. " fillitem data
wa_item-plant = wa_mchb-werks.
wa_item-stge_loc = wa_mchb-lgort.
wa_item-batch = wa_mchb-charg.
wa_item-entry_qnt = wa_mchb-clabs.
wa_item-move_type = '201'.
wa_item-entry_uom = wa_mchb-meins.
append wa_item to it_item.
elseif wa_mchb-clabs lt 0.
clear wa_header.
wa_header-pstng_date = sy-datum. " fill header data
wa_header-doc_date = sy-datum.
wa_code-gm_code = '03'. "fill code data
clear wa_item.
wa_item-material = wa_mchb-matnr. " fillitem data
wa_item-plant = wa_mchb-werks.
wa_item-stge_loc = wa_mchb-lgort.
wa_item-batch = wa_mchb-charg.
wa_item-entry_qnt = wa_mchb-clabs.
wa_item-move_type = '202'.
wa_item-entry_uom = wa_mchb-meins.
append wa_item to it_item.
endif.
endloop.
clear lv_lin.
describe table it_item lines lv_lin.
if lv_lin = 0.
write : / 'No records found'.
endif.
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = wa_header
goodsmvt_code = wa_code
importing
materialdocument = lv_matdoc
tables
goodsmvt_item = it_item
return = it_return.
if it_return is initial. " if record created successfully
call function 'BAPI_TRANSACTION_COMMIT'. " commit work
write : / lv_matdoc, 'IS CREATED SUCCESSFULLY' color 5.
loop at it_item into wa_item.
write : / 'Mat :', wa_item-material,'bat :', wa_item-batch.
endloop.
else. " if record is not created successfylly
loop at it_return into wa_return.
write : / wa_return-message color 6.
endloop.
uline.
endif.
else.
write : / 'No Records found' color 7.
endif. " gt_s035 is not initial
Edited by: Arunmozhi_06 on May 30, 2011 12:48 PMHi,
Did you passing the leading 0's in the cost center field?
and check the below coding..
* Structures for BAPI
data: gm_header type bapi2017_gm_head_01.
data: gm_code type bapi2017_gm_code.
data: gm_headret type bapi2017_gm_head_ret.
data: gm_item type table of
bapi2017_gm_item_create with header line.
data: gm_return type bapiret2 occurs 0.
data: gm_retmtd type bapi2017_gm_head_ret-mat_doc.
clear: gm_return, gm_retmtd. refresh gm_return.
perform show_status using 'Scrapping(551) Material'.
* Setup BAPI header data.
gm_header-pstng_date = sy-datum.
gm_header-doc_date = sy-datum.
gm_code-gm_code = '06'. " MB11
* Write 551 movement to table
clear gm_item.
move '551' to gm_item-move_type .
move xresb-matnr to gm_item-material.
move p_bdmng to gm_item-entry_qnt.
move xresb-meins to gm_item-entry_uom.
move xresb-werks to gm_item-plant.
move xresb-lgort to gm_item-stge_loc.
move p_grund to gm_item-move_reas.
* Determine cost center per plant
case xresb-werks.
when '0004'.
move '0000041430' to gm_item-costcenter."pass leading zero's in the cost center field
when '0006'.
move '0000041630' to gm_item-costcenter.
when '0007'.
move '0000041731' to gm_item-costcenter.
when '0008'.
move '0000041830' to gm_item-costcenter.
endcase.
append gm_item.
* Call goods movement BAPI
call function 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = gm_header
goodsmvt_code = gm_code
IMPORTING
goodsmvt_headret = gm_headret
materialdocument = gm_retmtd
TABLES
goodsmvt_item = gm_item
return = gm_return.
Maybe there is some config missing for your cost center, or maybe something missing in your code. check above.
Regards,
Dhina,..
Edited by: Dhina DMD on May 31, 2011 8:02 AM -
How to check report server name and how to start report server in 10g ?
Hello Experts,
I do have 10g Dev suite installed on my machine
I want to run my report on web using OC4J
How can i check the report server name as well how can i start the report server if is not running ?
As well,
Want to know in real time how it works in case there is application server installed
Thanks in advance,
SShubhangiHi Tony
Sorry for the confusion as I m new to reports
I do have 10g Dev suite installed/Report builder on my local machine
I want to run my report on web using OC4J on the same local machine instead of the Run paper layout and Run web layout option
Means i want to run the report by passing URL like below
http://hostname:port/reports/rwservlet?report=report_name server=server_name+userid=db_connect_string+destype=file
+desformat=spreadsheet+desname=C:\temp\myexcel_output.htm
How can i check the report server name as well how can i start the report server if is not running ?
Hope this is clear now
Thanks... -
Checking for month name and number in different language?
I have to let people search for documents by date. The database is used by French-speakers as well as English-speakers. The search allows users to type in free text (because it's not just dates they might search by, though if they do type in something that's intended to be interpreted as a date, that's the only thing they're allowed to type in). So, I might get '23/Apr/2009' or '2009/04/23', for example. (I also have to allow them to submit 23.04.2009 and 23 04 2009 and any combination of the above!)
I have written a function which breaks the string into three bits, and then I work out if each bit is a year, or a month, or a day with simple rules (eg, if it's a number between 1900 and 2400, it must be the year component).
When it comes to the month, I do two things. One is obvious: is it a number between 1 and 12? The other is, is it a month name that appears in a list of 'allowed' month names. So my function does this at the start:
v_validmonths := 'january,february,march,april <and so on>';
v_validmonths := v_validmonths || ',janv,fevr,avr,mai, <and so on>';Then I do this:
for x in 1 .. listlen(v_validmonths,',') loop
v_probemonth := listgetat(v_validmonths,x,',');
if instr(lower(v_partone),v_probemonth) > 0 then
v_month := extract (month from to_date(v_partone,'MON'));
end if;
end loop; IE, I compare the first component of the string (v_partone) with the list of allowed month names. I repeat that for the other two parts of the supplied string. As you can see, if one of the parts of the supplied string matches an allowed month name, I then try to extract the month number into a variable, using Oracle's own extract function.
And that's where my problem arises. Because although "aout" is valid French for August and is permitted by my list of valid months, the extract function fails to understand it. A simple select extract (month from to_date('AOUT','MON')) from dual, for example, gives an ORA01843 (invalid month).
How can I get the code to work with French (and German, actually) months and month abbreviations whilst also being able to understand English ones? Is there an in-built function that would allow me to do this? Or is there some way neatly to say, 'yes: AOUT is in the list, and it's month 8' without me having to rely on the extract function to work it out?
(I realise that the business requirement here is very peculiar and your first reaction will probably be "this is horrible!". I will absolutely agree with you! But this is the requirement as has been explicitly specified by the MD and I can't negotiate it away, sadly.)Hi,
Many of Oracle's date functions allow a parameter where you can override the current NLS settings only for that function call.
For example:
SELECT TO_DATE ( 'JUIL.'
, 'MON'
, 'NLS_DATE_LANGUAGE=FRENCH'
) AS month
FROM DUAL;You could also create your own table of month names
NAME NUM LANGUAGE
JANVIER 1 FRENCH
JANV 1 FRENCHand look up the names in this table, rather than in a string hard-coded in the function. This might be especially useful if you wanted to allow your own abbreviations or spellings (e.g., ignoring accent marks).
Edited by: Frank Kulash on Dec 16, 2010 11:40 PM -
Is there any std. BAPI to check both user name and password exist or not
Hi frnds,
I am looking for a std. bapi to check both username and password exist or not..
i found one bapi bapi_user_existence_check. but it checks only username...I don't think that you will have access to the passwords that are stored in the system.
If so, you could read every user's password and logon to the system.
I guess that they're encrypted and stored on the database.
Why do you need to check for the password. Isn't the username sufficient? -
whats m
Hi, I called Apple Support this day, and the answer is that enterprise WPA wireless is NOT supported by Lion Internet Recovery.
You can find the supported configurations and protocols on Apple site:
http://support.apple.com/kb/HT4718?viewlocale=en_US -
Error 0x00000709 operation could not be compleated Double check the printer name etc.
After installing my new printer and removing all other printers from my computer I now can not make the only printer listed as my default printer. I get this error 0X00000709 operation could not be completed Double check the printer name and make sure it is connected. I have done all that over and over again. I also I have reinstalled the old printer software and tried to default to my new printer at that time and still the same error. I have checked my register and it has the old printer listed but does not allow me to change it. I now have removed all but the new printer from my computer but I still can not make it my default printer. Programs such as Adobe only recognizes the default printer (which is not there any more) and don't even list the new printer as an option. The printer works just fine accept with the programs that uses the default printer. The Windows Hardware and Device Troubleshooting finds the problem (printer not set as default)but can not fix it.
I sure wish someone out there could help me get rid of the error and allow me to default my printer again. I have noticed other people have had this same issue with error 0X00000709 using other Windows versions as well. I have been trying to resolve this issue for the past three months and would appreciate any and all ideas.
I have an HP Pavilion elite HPE 337C computer running with Window 7 and I installed my new HP LaserJet PRO CM1415fnw color MFP printer. My old printer that I removed (but is still listed in my Regester) was an HP 6500 inkJet.After doing some research on the net:
This link provided an answer:
https://exploreb2b.com/articles/solving-error-0x00000709-cant-set-default-printer-problem
Regedit -> HKEY_CURRENT_USER -> Software->Microsoft->Windows NT->Current Version->Windows
One of the entries you should see in the right hand pane is“Device”. If the value for “Device” as noted under the “Data” area is anything other than the printer you are using, then highlight “Device” in the right hand pane with the mouse and press the delete key to remove it. (I edited it and put the name of the printer I wanted to be the default)
VI. Restart the computer so it starts with the altered Windows system registry. (Italics mine) -
Field Selection error for movement type and G/L account
I am currently experiencing a field selection error between movement type 601 and G/L account 7140000. The problem field is 'Segment'. This field is set to required for the G/L account, but it is hidden for the movement type 601. This inconsistency causes an error when posting the goods movement. According to business requirement the field must be required for the G/L account, therefore we must make this field optional for the movement type.
However, in configuration the field segment does not appear for the movement type 601. Therefore it can not be changed to optional.
Does anyone know a workaround other than making this field optional for the G/L account because the business requirement is to have this field as required?????
Many ThanksHi,
On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
Regards
Chandra Shekhar
Maybe you are looking for
-
So I have an 5th generation Ipod touch. I was playing games and noticed that one of them started completely over and said to log into the Game Center. I tried to but it wouldn't let me. So I let it go, but then the Game Center app just poped up whene
-
Error message "EDI: Field SEGNAM in data record is default"
Hi all, I am facing issue in Idoc creation. I am getting error message saying 'EDI: Field SEGNAM in data record is default' and so Idoc is not getting created. Can anybody tell me how to resolve this. I checked in debugging mode and found that this e
-
I'm getting a mini and I intend to use it on my 46" Panni. I still have an empty HDMI slot but my TV also has a VGA slot as well. Since I have to buy a cable adapter does it matter which direction I take VGA or HDMI? One other bit of info, my tv is 1
-
After publishing Player files, I want to preview the Player output so I launched player.exe. It opens in Internet Explorer, and I can see and expand the modules and view the topic listing. However, I cannot see the Concept pages. All I get is a blank
-
Any experience with Apple fixing Iphone just after warranty has expired
My iPhone has just past a year old, actually it's now 54 Weeks since I purchased it. The Touch Screen has just stopped working, it was fine, I went to unlock it and it didn't respond. I've now reset, restored etc and the touch part of the screen is j