Error :Check product hierarchy for uniqueness

Dear all ,
load is failing with below message
Error:Check product hierarchy for uniqueness.
please suggest
Regards,
Puru

Hi Purshottam,
Check the technical names of the hierarchy nodes. They should not be same.
This issue is faced when technical names of the hierarchy nodes are same.
To solve this issue, modify the technical names of your hierarchy nodes and then try loading the hierarchy.
Thank you,
Ketan Z

Similar Messages

  • Error : No basis hierarchy for product type 01

    Hi
    When i am trying to create product hierarchy in CRM 5.0 the following error
    "no basis hierarchy for product type 01" is futuring in the system,I would rquest you help in this issue.
    Regards
    Krishna

    Hi All,
    While congiguring the material system showing the same mssg like "No basis hierarchy for product type 01". Even If I created the hierarchy. Plz any body is there to solve this issue.
    Thanx
    Chinmaya

  • Error when charging hierarchy for infoObject hieracky for 0MATERIAL

    Error when charging hierarchy for infoObject hieracky for 0MATERIAL from infosource 0MATERIAL_LKLS_HIER.
    I have an issue when performing a charge of the material hierarchy for the 0MATERIAL InfoObject. The problem is that maybe there are some referential problem. I show you 2 images about that.
    [http://bp1.blogger.com/_RnNmoD1OiLE/SE1AyQThUgI/AAAAAAAAAmU/PPp7Uwn22PI/s1600-h/ErrorCarga1.JPG]
    [http://bp0.blogger.com/_RnNmoD1OiLE/SE1A6bGswnI/AAAAAAAAAmc/Gtvotn1nilI/s1600-h/ErrorCarga2.JPG]
    Could please anyone give me a clue about what's my problem? All regs i'm trying to upload to my BW system give the same error. The datasource i'm using is 0MATERIAL_LKLS_HIER. As you can see, it has registers on it.
    [http://bp2.blogger.com/_RnNmoD1OiLE/SE1BBvyBAOI/AAAAAAAAAmk/i2aXHvt8E7o/s1600-h/ErrorCarga3.JPG]
    Any Idea? Thank-you!
    Artur.
    Edited by: Artur Rodriguez Coma on Jun 9, 2008 4:59 PM
    Edited by: Artur Rodriguez Coma on Jun 9, 2008 5:00 PM

    For this you can enter the screen of infoobject change and select the hierarchy tab at the bottom theres a button External Characteristic in Hierarchy ....there you can set other infoobjects that can be part of the hierarchy of your infoobject...
    This is the procedure but you only can add infoobjects that attributes of the principal infoobject ....
    I hope this helps
    Regards

  • Error: check your ApJServLogFile for details

    When I start the apachectl , error : check your ApJServLogFile for details
    Pls help..thanks

    When I start the apachectl , error : check your ApJServLogFile for details
    Pls help..thanks

  • Product hierarchy for indirect material?

    How do we maintain prodh for indirect material?
    for maintaining indirect materials master which of the following attributes are important to be considered
    Material Numbering
    Unit of Measure
    Material Type
    Product Hierarchy
    Valuation Class
    Material Status
    Country of Origin
    Conflict Minerals
    Material Group

    Indirect material is a consumable material. Its used with direct material for procurement.
    Usually this material are non stock materials and it consumed immediately when you will do goods receipt.
    And for attributes, its depend on your business process. You can maintain all these above as per your requirement.
    But some are necessary to create a material master record like as
    Material Numbering
    Unit of Measure
    Material Type
    Valuation Class
    Material Group

  • Time out error in production server  for alv grid report

    hi. i have developed alv grid report using nested select statments. when i testing in development  server it is giving the output but in production server if i give 4 months then it is showing time out error.please help me out..its urgent.
    Thanks in advance.

    Hi Manu,
    Don't use Nested selected statements.
    Use the Following  Performance Tuning Options that i have given below so that your problem can be solved.
    1)  Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
    2) Avoid for all entries in JOINS
    3) Try to avoid joins and use FOR ALL ENTRIES.
    4)   Try to restrict the joins to 1 level only ie only for tables
    5)   Avoid using Select *.
    6)   Avoid having multiple Selects from the same table in the same object.
    7)  Try to minimize the number of variables to save memory.  
    8)   The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
    9)   Avoid creation of  index as far as possible
    10) Avoid operators like  <>, > , < & like % in where clause conditions
    11) Avoid select/select single statements in loops.
    12) Try to use 'binary search' in READ internal table. Ensure table is sorted before using   BINARY SEARCH.
    13) Avoid using aggregate functions  (SUM, MAX etc) in selects ( GROUP BY , HAVING,)  
    14) Avoid using  ORDER  BY in selects
    15) Avoid Nested Selects
    16) Avoid Nested Loops of Internal Tables
    17) Try  to  use FIELD SYMBOLS.
    18) Try to avoid into Corresponding Fields of
    19) Avoid using Select  Distinct, Use DELETE ADJACENT
    <b>
    Reward Points for sure if you find it useful. </b>
    Regards
    Babu

  • PRKC-1031: error checking free space for /dev/shm

    Dear,
    hope someone can help me with this error.
    install oracle 11g on linux OUL5 2 nodes cluster.
    the cluster is fine. when install database, i always have this error. did increase /dev/shm to 2G but still get this error.and it would not let me continue.
    the specific Prerequisite checks were fine.only failed on swap
    Linux rac11g1 2.6.18-92.1.13.0.1.el5PAE #1 SMP
    Filesystem 1K-blocks Used Available Use% Mounted on
    /dev/mapper/VolGroup00-LogVol00
    22282108 8542032 12589920 41% /
    /dev/hda1 101086 40264 55603 42% /boot
    tmpfs 2097152 0 2097152 0% /dev/shm
    /dev/mapper/VolGroup01-LogVol01
    25189484 769252 23140644 4% /u01
    Thanks in advance.

    Hi
    you are quite welcome, so you don't any issues with the user equiv part during the cluvfy controls?
    how many instances are you running on your server that hosts ASM?
    More than 1 then read that: Did you change your shm values in the kernel ? Please check those values in 2.6 Configuring Kernel Parameters
    64 bits: http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/pre_install.htm#i1011296
    32 bits: http://download.oracle.com/docs/cd/B19306_01/install.102/b15660/pre_install.htm#sthref264
    Note that you have to increase : semmni, semmns,shmmni should be multiplied by # of instances, SHMMAX should be set to avail memory
    Can you please give us your values from your server please?
    Your physical memory :
    grep MemTotal /proc/meminfo
    And also the result of
    ipcs -l
    Edited by: Hub on Oct 24, 2008 11:07 PM

  • Error activating CIF model for subcontractor PO w/component requirements

    Hello CIF experts,
    I'm having a problem with the CIF POs and PReqs between ECC and SCM.  If the CIF model is already active, then a subcontractor PO with component requirements is created (the material exists in SCM but the components do not exist in SCM) then the order CIFs successfully to SCM. 
    However, if the CIF model is deactive, then a subcontractor PO with component requirements is created (the material exists in SCM but the components do not exist in SCM), then when the CIF model is activated, it fails.  The error is "Product x for location y in model z does not exist". 
    We do not want to send all components to SCM because we do not plan components and do not want to overload SCM with additional data. 
    Can anyone answer why the order CIFs successfully if the model is active but why it fails when trying to activate the model?
    Much thanks,
    Elizabeth

    Elizabeth
    You have mentioned that you get an error that product X - loc Y does not exist in APO. Does this " product X" refer to the parent material or component material ?  If the product X refers to component material then check your PO integration model and make sure the component is not included in the filter criteria by mistake - CFM5 tcode .
    I understood your scenario and i believe that you must be able to transfer the parent subcontracting PO successfully to APO . Please delete the error queue and check your master data again in APO. Check if the parent material - location exists in APO and then create the integration model and activate it.
    Thanks
    Aparna

  • Production hierarchy to be update in COPA

    Hi SAP expert
    i having problem and need SAP Gurus expert to help me resolve this issue, when i creating each material, i need to create production hierarchy for each material.
    example
    Material A - Production Hierarchy is 0001
    Material B - Production Hierarchy is 0002
    i managed to create all process in MM. the problem is the production hierarchy not updating in COPA site. when can be wrong ? any config missing ? or COPA just for SD site ?

    There is no direct link between MM and COPA , the values to COPA will be coming from SD condition types . The problem may be between MM ans SD

  • Product Allocation for STO

    Hello Experts,
    We would like to check Product Allocation for STO using two custom field. These custom field will be created as custom partner function for the customer (KUNNR) assigned to receiving plant (TO WERKS).
    Could anyone help us with the relevant BADI and user exit that we need to implement?
    Thanks,
    Prasun

    Hi Vinod
    Thanks for the information.
    We have gone through SAP Note 600883 and are checking the BAdI ME_TRIGGER_ATP and BAdI ME_CHANGE_CHARACTER. However, we are yet to find a way to make this happen.
    If you have experience of similar implementation, could you please share more information on this?
    Thanks,
    Prasun

  • Standard field to be used in place of Product Hierarchy

    HI,
    We are going to have a new material in our system but we do not want to create a new Product Hierarchy for that. Infact we want that if any new material is created, we need not creata any new product hierarchy for that.
    Please suggest what standard field can we use instead of Product Hierarchy without impacting the system .
    Thanks.
    Rudresh

    Hi Rudresh,
    Product Hierarchy is a informative field and can be used for reporting purpose. For a specified material type, if you dont want to maintain product hierarchy, make that field optional using OMS9.
    Regards,
    Amol

  • Product Hierarchy assignment

    Sap Gurus
    Pl let me know how and where we can assign the  New Product Hierarchy to the sales organization
    Thax in advance

    Jannu,
    Product hierarchy for MM-SD integration , plz chk the below path
    Logistics General>MM>Settings for Key Fields>Data relevant for SD->Define Product hierarchy.
    Thanks,
    raja

  • Error in GR for a Production Order for a particular material....Unique case

    Hi Dear Gurus,
    I am facing the following problem:
    There is a production order for a material (say X, matrl type FERT) of order qty 21EA. First we did GR of qty 9EA. but when we are going to do GR for the rest of the qty i.e.12EA it is not happening system showing Error message " Account XXXXX requires an assignment to a CO object".
    But while we are going to do GR for the rest 12Ea qty in two parts i.e. first by doing GR of 11EA then 1EA system is accepting.
    Interestingly if do the GR for the same order as first by 8EA and then the rest 13EA that is also accepting.
    Eventhough, for any other material (of same type and group) if we make a production order of the same 21EA and then doing GR firstly by 9Ea and then 12EA that is also getting posted properly.
    What would be the reason for the error message for that particular case?
    Here the system is SAP4.5B version, material MRP type is M0, lot size  FX & fixed lot size 10Ea, safety stock 8EA, Reorder point 15.
    Thanks in advance for your inputs.
    Regards,
    Arghya

    REfer this link..
    [https://forums.sdn.sap.com/click.jspa?searchID=25161817&messageID=7040673]
    [https://forums.sdn.sap.com/click.jspa?searchID=25161817&messageID=7159723]
    hope the above helps..
    karthick

  • Product :  Errors in attribute hierarchy structure SAP BCA   000164

    Hi All ,
    When ever i create /Display /Change Product in
    Financial Supply Chain Management --> In House Cash > Master Data>Product Definition--> Product --> Create /Change/Display
    system through below mentioned error .
    I tryed to resolve problem as per below mentioned program through se38 , but still getting same error
    Errors in attribute hierarchy structure SAP BCA   000164
    Message no. FIPR217
    System Response
    An error was found in the attribute hierarchy.
    In some cases, it is not possible to display the attribute hierarchy without having to correct the errors first.
    Procedure
    It is recommended that you run the FIPR_CLEAN_ATTRIBUTES (by using transaction SE38).  This report can recognize errors, and it attempts to correct them automatically.
    Caution: This report can change your table entries permanently.
    Once this report has run, you need to check the hierarchy structure, and make any necessary changes.
    Regards
    Prakash Sharma

    Hi,
    the realignment (KEND) does not change the line item tables (CE1***, CE2***), thats why they remain unchanged.
    The line items in CE1**** can not be changed. If you really want to have new line items (with the new prod. hierarchy) try in test-client if the use of report RKECADL1 and the new transfer to CO-PA for the deleted line items (KE4S, KE4SFI,...) can help you (SAPNET-note 69370 for details).
    CE2**** + SQL-error: As per now, I don't have an idea how to deal with that cases.
    best regards, Christian

  • Sharepoint 2013: Problem / Error when creating Variation Hierarchy for French and German Languages from Variation root EN

    Hi,
    I have a website with English and Arabic Language Packs installed. I have the corresponding Variation heirachies created and the whole site collection is published.
    Recently the client asked for french and german languages to be accomodated as well. So I followed the same approach I did for English and arabic (installed the language packs) for foundation, ran ocnfiguration wizard, installed server language pack &
    ran configuration wizard.
    But after creating the variation label, when i try to create the variation heirarchy, I am getting the following error.
    "Unknown failure when creating a variation of page http://server:port/en/pages/default.aspx in label /fr/Pages/default.aspx.
    The Variations Create Hierarchies job failed with the following error message&  Unknown failure when creating a variation of site
    http://server:port/en in label fr."
    Am not sure what is going wrong. Appreciate a feedback.
    Thanks,
    SSP
    SSP

    Hi,
    According to your description, my understanding is that the error occurred when you created the Variation Hierarchy for French and German Languages from Variation root EN.
    I recommend to check the Resources folder located at C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15 to see if the file core.fr-FR.resx exists in the folder.
    Here is a similar thread for you to take a look:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/611575b2-d129-44c6-814b-2e5782178850/unknow-failure-when-creating-variations-in-sharepoint-2013-is-this-a-bug-in-sharepoint-2013-rtm?forum=sharepointadmin
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

Maybe you are looking for