Error checking no longer works when filling in a form - FF 29

I am running FF 29.0 and when I try to fill in the following form, the error checking on the form does not work, I cannot tick the checkbox and the 'Submit' button remains 'greyed-out'.
The problem persists in 'Safe' mode. Here is the form in question:-
https://digitalmailbox.com.au/registration
Hope a solution can be found.
Regards
Dennis W

I don't normally use Internet Explorer but on this occasion I thought I would give it a try.
IE 11.0.9600.17105 handles the above registration page without a problem.
Is the problem with FF 29 or with the webpage in question?
Regards
Dennis W

Similar Messages

After up date my I phone 5 will no longer work when calling an automated phone . Press 1 for this or 2 for that. It tells me wrong selection.

Why will my phone no longer work when calling an system with automated dialing, press 1 for this or 2 for that. Tells me not a valid number.

sunshinesunshine wrote:
So basically if a iphone has a fault after the 1 year warranty period is over, there is nothing the consumer can do but purchase a new phone??
Pretty much. Except that Apple will replace it for a fixed fee that is far less than the cost of a new phone. In the US the replacement cost for an iPhone 4 is $149. It is comparable in the UK. Unless you can prove that the fault was present at the time of purchase. A switch wearing out would probably be considered normal wear and tear, not a "fault".

HT1947 The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1. This seem to happen after the update. Any suggestions?

The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1.
This seem to happen after the update. Any suggestions?

Dear Apple friends,
I have the exact same problem with some apps.
Even when I try some websites in Safari and Chrome that require loading big chunks of data they crash.
Today it crashed in two new places. In the notification center and when I opened newstand app I no longer was able to return to the main window and the dock disappeared.
I have my ipad retina for about three months now but latelly this issue has became more frequent. What should I do?
Should I update to the latest firmware and do what raymond73 said?
Is there a fix for this issue?
Has Apple said anything about this? Because I see that this issue is happening to a lot of people.
Is it possible to downgrade to iOS 6?
Is it a firmware problem? That can be fixed in future releases? Or an hardware issue?
Should I wait or go to the place I bought it and try to get the money back?

In Yosemite Mail, the control click option no longer works when clicking on attachments, that previously allowed you to save, quicklook, and select app to open with. Any solutions?

In Yosemite Mail, the control click option no longer works when clicking on attachments, that previously allowed you to save, quicklook, and select app to open with etc. Any solutions?

Hi
It shows just 4 always as an option in the "open with" lsit. Also I haven't downloaded any apps for a while so why would it start now?
Do you know how I can estabilsh how many apps are counting toward this 10 and what they are?

Just upgraded to Mavericks and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported. Is there a way to use my HP6100 Printer with Mavericks?

Just upgraded my 2009 iMac (3.06 Ghz, core 2 duo $GB 1067 Mhz DDR3) to Mavericks OSX 10.9.5 and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported. Printer says the software was improperly installed. Is there a way to use my HP6100 Printer with Mavericks or do I need to go back to Mountain Lion or Snow Leopard?

It's not clear whether your printer is included in the Apple list - there is an Officejet 6100 and a couple of other types. Go to the page linked to above and use the browser search for 6100.
I'm afraid HP are notorious for not supporting older printers - I had the same problem. Probably they hope you will buy another printer (I did, but it was a Canon). I did look on HP's site and couldn't see a driver - you could give it a try (make sure you have the exactly correct printer name):
http://www8.hp.com/uk/en/support-search.html?tab=1#/qryterm=HP6100&search_search type=s-002
Alternatively ou could try Gutenprint (open source software):
http://gimp-print.sourceforge.net/MacOSX.php
I found it would indeed drive the printer, but the colour dithering wasn't very satisfactory and the duplex printing bolt-on wouldn't work. However as Gutenprint is free it's worth trying to see if it's any good for you.

My forward delete no longer works when searching or editing on Itunes since installing an update

My forward delete no longer works when searching or editing on Itunes since installing an update. Anyone else have that problem? Any fixes?

Have you tried:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
Apple will exchange your iPod for a refurbished one for this price:
Apple - Support - iPod - Repair pricing
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

The control click and external mouse right click no longer works when copying and pasting album art within itunes. Ex. Hit get info for one song to paste to the rest, copying the artwork wont work when it used to.

The control click and external mouse right click no longer works when copying and pasting album art within itunes. Ex. Hit get info for one song to paste to the rest, copying the artwork wont work when it used to.

Hello there, Teworsham90.
The following Knowledge Base article reviews the process of adding artwork to content in your iTunes Library:
iTunes: How to add artwork to songs and videos in your library
http://support.apple.com/kb/HT1409
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

When filling out a form, when I type in information in one field, move to the next and begin typing,

when filling out a form, when I type information into the first field, move to the next and begin typing, the information in the prior field disappears

Hey gregery,
Please let me know what Acrobat version are you using.
Also, go to File> Properties> Security and check whether form filling is allowed or not as shown below:
Regards,
Anubha

How do I change the font size of the "typewriter tool" when filling out a form?

How do I change the font size of the "typewriter tool" when filling out a form?
== This happened ==
Not sure how often
== The typewriter tool works, but the font is very tiny.

You can set a minimum size for the Monospace font:
Tools > Options > Content : Fonts & Colors: Advanced > Monospace

The Horizontal & vertical scroll is not visible or not working when i run the form in Forms 6i.

Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
In this form , there are 5 canvas namely
CANVAS2 - Stacked Canvas
PASS - Content Canvas
MAT_RATES - Content Canvas
DATE - Content Canvas
PREVIOUS - Content Canvas
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.

Vijetha wrote:
Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.
hello vijetha,
window and canvas show scroll bar when it need.
You should show block property
and set block scroll bar
hope this helps..
Hamid

When filling out a form, some fields copy to others when I tab to the next. How can I make this stop?

When filling out a form, some fields copy to others when I tab to the next. How can I make this stop?

You can't using Adobe Reader. It looks like whomever created the form used the same identifiers (names) for various fields. Each field with the same name will populate with the information used in another field of the same name. This is intentional.
Normally when I see this, it tells me that someone created an initial field then copy/pasted it to make additional fields but forgot to change the names.

Workspace no longer works when using flex application as Form

Hi,
I've got a problem in the Workspace with one of my process that use a flex application as form.
I used the tutorial "Creating Flex® Applications Enabled for LiveCycle® Workspace ES" to create the flex application and it works well in the workspace (displays ok and datas well passed to the process).
The task completes well because my process fires the next step with all the datas filled in the task.
But after the end of the task (when I click on the submit button of the form) the Workspace is no longer usable.
I can no longer access preferences, messages, starting process panel... when a click on an item in any Menu nothing occurs. Everything is blocked.
I must restart the Workspace to be able to use it again.
Can someone help me please?

I think I have it solved, will check...
When modifying, the P3 in the go url was left out. what was P2 should be P3 and the correct P2 would have the table.column name.

Go URL no longer works when placed as 'Treat as Text' column property

Hi all - I have a question on syntax for using a Go URL as part of the 'Treat as Text' Data Format property for a column...
In a pivot I had a column (employee name) that had in the formula a Go URL that passed parameters to another report. The drilled to report would then open with the employee that had been clicked on. The go url works fine. However, if the report (the one with the go url link) was to be printed in PDF form, the URL link specified in the column's formula will be printed, not the actual column value, the employee's name.
So, to get around this, I removed the go url link in the formula and resorted back to the column's value (table name.column name) in the formula and placed the go url syntax (with some modifications) into the 'Data Format' property of the column and set the 'Treat Text As' to:
*@[html] "<a href=saw.dll?Go&Path=/shared/(...path of report to drill on)&Options=fdr&Action=Navigate&P0=1&P1=eq&P2=" @H ">" @H "</a>"*
The employee's name is to be included after '...&P2='
Now, I see the column's value as a hyperlink and the correct report is navigated to, however, the parameters being passed don't work any longer, I'm getting all employees, not just the one I clicked on. This was working until I put the go url into the 'Treat as Text'.
For what I'm trying to do, does the syntax seem correct?
Thanks.

I think I have it solved, will check...
When modifying, the P3 in the go url was left out. what was P2 should be P3 and the correct P2 would have the table.column name.

.hasDefinition no longer working when I move .swf movie to a diff directory

I am on Flex 3.6 (Sorry, the move to 4.5 is just too darn difficult right now as I am on a tight deadline and I ran into many many migration issues).
For years I have used the following code in a component I made that subclasses SWFLoader and it works just dandy fine:
var mClip:MovieClip;
var swfAppDomain:ApplicationDomain = this.loaderContext.applicationDomain;
if (swfAppDomain.hasDefinition(symbolLinkName)){
var classRef:Class = swfAppDomain.getDefinition(symbolLinkName) as Class;mClip = new classRef();
The .swf's I am loading with the SWFLoader contain various animation MovieClips that I created in Flash CS4 and are stored in the library of that animations.swf. When I keep the animations.swf in the relative path of the Flex app MyApp.swf (i.e. I have a folder myApp which has the Flex app MyApp.swf and a folder called assets which has the animations.swf) all works fine. As soon as I move the assets folder to a different folder that is outside the myApp folder foodchain, the .hasDefinition no longer works. That is, the hasDefinition() can't find my animation in the library of the animiations.swf
What on earth could be the issue? I don't get any exceptions or error messages. I just don't get the MovieClips out of the library.

Thank you so much for your prompt and helpful reply. I am both testing locally (using file system relative path url's) and going to deploy using http. Where do I put the crossdomain.xml file? In the foodchain of where my app will be running? If I am testing locally and want to test the http url paths, do I put the crossdomain.xml file inside my html-template folder?
Thanks again for all your help.

Spell check no longer works in Safari after iOS5 update

After updating to iOS5 on my iPad2 yesterday, the spell check feature no longer works in Safari when using the Apple Wireless Keyboard. It works in all the other applications I've tried, such as Pages and Mail. It's a real bummer, especially if writing a blog. Any help or suggestions? Spell check worked fine before the update. (Spell check still works in Safari with the on-screen keyboard, just not with the Apple Wireless Keyboard - Safari seems to be the only application effected so far) Thank you.

Update: After rebooting my macbook - Moves now playing. TV shows bought using a different apple ID account still does not work even though they did before.

Error checking no longer works when filling in a form - FF 29

Similar Messages

Maybe you are looking for