Error checking work status

Dear ALL,
I'm working on SAP BPC 10.0 NW version.
So, I'm launching a script logic for a particular company, actually working on the currency translation but unfortunately I got an error "Error checking work status".
I did enable the Work Status in my model, and I did also put 2 Controls in it. But, I'm very sure the 2 Controls are all pass which I could also see the same from Control Monitor.
Any part which I could have missed out or any steps I have to work on in order to skip the error?
BR,
Antony

Hi Antony
Finally the problem was bigger than I thought; the user uploaded data from previous period and it’s affected the currency conversion, because it is configured at periodic way
The access member profile for each group was configured wrongly, too
We fix this point and the currency conversion and the work status pass OK
Thank for your time answer its
Regards
Ariel

Similar Messages

  • Package Log - Error checking work status

    Hi, Experts,
    We are using SAP BPC 10 NW.
    When we run a package manually it is ok. But when we include it at package link (with the same prompt) and run it, we received error message (Error checking work status). Look at the log below:
    ++++++++++++++++++++++++++++++++++++++++++++++
    /CPMB/MODIFY finished in 0 seconds
    /CPMB/ALLOCATION_LOGIC finished in 449 seconds
    /CPMB/CLEAR finished in 0 seconds
    [Selection]
    SELECTION = /CEREAL/EXPENSE/PRIVATEPUBLICATIONS/BPCADMINBIP/TempFiles/FROM.TMP@@@SAVE@@@@@@EXPAND@@@|DIMENSION:CATEGORY|PROJETADO,REVISAO|DIMENSION:ENTITY|CC_11
    [Message]
    RUN_LOGIC:
    Error checking work status
    +++++++++++++++++++++++++++++++++++++++++++++++
    There is no work status activity at REVISAO and PROJETADO category members at this model.
    Would anybody help us to understand what is happening?
    Best Regards,
    Ana Teresa

    Hi Ana
    I found a related note.
    1945016 - "Error checking work status" when executing package
    Symptom
    There is "Error checking work status" in the status log after executing clear package:/CPMB/CLEAR.
    Environment
    SAP BusinessObjects Planning and Consolidation, version 10 for SAP NetWeaver
    Reproducing the Issue
    Run clear package:/CPMB/CLEAR
    Set check work status when clearing as YES. ("CHECKLCK"=YES)
    Check detail status log
    CauseWork status is not set or not found for the "to be cleared" data.
    Resolution
    Try to change the work status of the data in EPM and check if system pops up with "work status not found".
    If yes, check in work status table (you can get the table name by running program UJ0_GET_GEN_TABNAME) if there is default work status assigned.
    If yes, check UJW_STATCODE table in SE16, incase the line which contain field ORDERN=0 is missing, run program: UJW_UP_INSERT_0_STATE to insert this line.
    See Also
    1862768 - EPMWorkStatus function displays wrong status
    Hope this helps.
    Regards
    Juan Pablo

  • Error changing work status in EPM Addin

        Hi all,
        I'm trying to change the working status for a category and a specific period.
        However in doing so the system is generating error
        Failed in checking status in control
        Failed or unexecuted control sets exist in your data region
        I'm doing this from Excel client, option EPM tab, save data, change work status.
        Working state has already configured in the Web Administrator
        That I can do to fix this error?
        Thank you for your help
        Regards,
        Guillermo

    Hi all,
    According to what the 1795953 note says and thread sent by Dinesh,
    the problem is some of the Entity members are not part of the Group selection on Ownership settings. This is the configuration that I have for the entity
        I'm trying to change the work status for the item Org_so, who is the parent of the other.
        I have another question, what is the relationship between the controls and work status,
        if controls have not been executed you can not change work status?
        Best regards,
        Guillermo

  • Script Logic - Check Work Status

    Hi,
    I am using the standard process chain "/CPMB/DEFAULT_FORMULAS_LOGIC" to trigger Script logic file.
    I have created some logic to clear and copy data to a targer category. I want to check the workstatus of the target category and if it is locked i want to clear/copy to fail.
    I am not sure how to go about this? I was thinking of adding the following but that is just a guess!
    TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,1)
    any advice would be helpful.
    Thanks,

    Hi,
    Ideally did want an option for the user to select option to check whether the copy should happen if the data had been locked. Have done this via the standard COPY package.
    Can this be done with the script logic e.g. using paramters in the package?
    Or if you create a script logic file does it always check the workstatus?
    thanks

  • Work Status log

    Hi experts,
    Coud anyone say how to fill Locks Log Table UJW_UPD_LOG. It found in programm UJW_WS_TEST.
    I need to analyse Work Status historical log - no only last state.
    Thanks a lot,
    Oleksandr.

    Hi Ana
    I found a related note.
    1945016 - "Error checking work status" when executing package
    Symptom
    There is "Error checking work status" in the status log after executing clear package:/CPMB/CLEAR.
    Environment
    SAP BusinessObjects Planning and Consolidation, version 10 for SAP NetWeaver
    Reproducing the Issue
    Run clear package:/CPMB/CLEAR
    Set check work status when clearing as YES. ("CHECKLCK"=YES)
    Check detail status log
    CauseWork status is not set or not found for the "to be cleared" data.
    Resolution
    Try to change the work status of the data in EPM and check if system pops up with "work status not found".
    If yes, check in work status table (you can get the table name by running program UJ0_GET_GEN_TABNAME) if there is default work status assigned.
    If yes, check UJW_STATCODE table in SE16, incase the line which contain field ORDERN=0 is missing, run program: UJW_UP_INSERT_0_STATE to insert this line.
    See Also
    1862768 - EPMWorkStatus function displays wrong status
    Hope this helps.
    Regards
    Juan Pablo

  • Work status error

    Hi gurus,
    When i`m implementing the work status when i lock a data region and i try to send data instead of receive a message like "this data region has submitted work status" i received and error message that says "Error when try to check work status".
    It doesn't allow me to send data but when i try to open the region via BPC for web to change the work status it shows me an incorrect current work status.
    Anyone has the same problem
    Thanks in advance.

    Hello eljosetxu,
    This may be related to some problem in UJW_STATCODE table.
    In this table, you should see in STATUS colums an indentifier number for the work state and an sequential number in column ORDERN (for each apset) starting in 0.
    The other columns will show what you have defined during work status configuration where 0 is manager, 1 is owner and 2 means both.
    In table /1CPMB/LKWS<APPSET_PREFIX><APPL_PREFIX> you can check what is the SATUS for each locked intersections and compare.
    As far as I know, the numbers in ORDERN must be sequential. Confirm that the column STATUS for the data region in the LKWS* and UJW_STATCODE tables are the same.
    Hope it helps! Let me know what you'we found
    Debora

  • Unlocking work status

    Hi,
    We are implementing BPC 7.5 NW version and having SP04.
    we have an Entity A (parent entity) and unerneath that we have two entities B and C.
    In the Entity Dimension we have an owner peroperty in which for Entity A we gave a user (say Administrator as the owner) and for both Entity B and C we gave another user (say-BPcuser as the owner)
    So the user Administrator of Enitity A is the owner of Entity A and he is also now the Manager for Enitity B and C.
    After making these settings, when we try to modify work status through BPC for Excel it takes to BPC for WEB and in BPC for WEB we make the following selection.
    Category-Actual
    Entity- A
    Time -2010.April
    And in the next screen we are changing the satus from sUBMITTED to APPROVED ( TO lock the Data region) and save it.
    Now when we input any data for this data we are getting Check work status settings.( which is our desired output)
    However when we try to change the work status setting From Approved to Submitted (to unlock the data region) with the ID Administrator (i.e Owner of Parent Entity A) it is getting saved.However when we try to input the data it is still showing check the Work status settings.
    So can you please suggest me how to unlock the work status settings now so that we can post the data for that data region.
    Thanks,
    Shankar.v

    Hi,
    If you are in a development system and if you want to delete all the locks on the data at one go......you could try reordering your work states (rearrange your last work state for example by moving it one step further up). You get a message on the screen that this will delete all the locks on the data....just confirm the message. You could change the order again back to the original order.
    Above is only if you are working on a development system and for test if you want to delete all the existing locks at one go.
    If your system wants only to unlock a specifc dataset, select the required members of the work state dimensions (refer to your appliation and work staus to know what the work status dimensions are for your application). Note, if your selection includes any parent member for a dimension current work status is not displayed.(This is again as per the work status set up in BPC that work status is stored at non-parent members).
    Please let me know if you still have any issues in deleting the locks

  • Work status in data package

    Hi,
      Assuming category, entity, time are my work status dimension, and i have decided to give a work status of 'approved' to category=budget, entity=sales, time=2015.total, hence category and entity are both base members while time is a parent member. However i DID NOT click on "include children in the data region". But later when i checked the work status of 'category=budget, entity=sales, time=2015.aug", it has turned into "approved". Don't i have to click on "include children in the data region" in order to flow this down to the children?
      Regarding the work status checking in data packages, what does the following mean:
    - Select whether to check work status settings when deleting comments?
    - Select whether to check work status settings when importing data?
    - Select whether to check work status settings when running logic?
    Thanks and regards

    Hi,
    You are absolutely right. Ideally, if "Should children of this data region be included?" is not selected, the children should not be included. However, I am not sure why this has happened in your case. Will definitely check on this and get back to you.
    For your second query regarding the DM packages.
    If you select Yes, work status settings will be copied with the data. If you select No, work status settings are not copied with the data.
    Hope this helps.

  • Work status SPRUNCONVERSION

    Hi,
    We are using script logic in the package.
    We would like to prevent the packed from running on u201Clockedu201D data.
    Below is the code of the script. The statuscode of locked data is 3. The maxstatus parameter in stored procedure is set to 1 (unlocked).
    *SysLib Stored_Procedure_Wrapper.lgl
    //=============================================
    // Currency translation logic
    //=============================================
    *RUN_STORED_PROCEDURE=SPRUNCONVERSION('%APP%','%CATEGORY_SET%','','GLOBAL','%SCOPETABLE%','%LOGTABLE%','' ,'' ,'', 1)
    Unfortunately we still can write to the locked intersection.
    We are using BPC MS 5.1.
    Could you give us some advise how to solve this problem?

    Mariusz,
    If you define a business rule in a script logic file and call the script
    logic file from data manager, the data generated by the business rule   
    will be posted to a locked data region since the business rule engine   
    cannot check Work Status. BPC has the limitation of the business rule. It has been earlier requested as an enhancement.        
    Regards

  • Error while checking the status of Oracle Cluster ware

    Hi
    I was trying to install the database using dbca after setting up the grid and database software on LINUX x86-64 RHEL 5.7 machine. The database software version is 11.2.0.3. It throwing the error regarding the connectivity of clusterware. So I checked the status of clusterware.
    -bash-3.2$ ./crsctl stat res -t
    CRS-4535: Cannot communicate with Cluster Ready Services
    CRS-4000: Command Status failed, or completed with errors.
    -bash-3.2$
    But when I ran below one:
    -bash-3.2$ ./crsctl stat res -t -init
    NAME TARGET STATE SERVER STATE_DETAILS
    Cluster Resources
    ora.asm
    1 ONLINE ONLINE sfv9699 Started
    ora.cluster_interconnect.haip
    1 ONLINE ONLINE sfv9699
    ora.crf
    1 ONLINE ONLINE sfv9699
    ora.crsd
    1 ONLINE OFFLINE
    ora.cssd
    1 ONLINE ONLINE sfv9699
    ora.cssdmonitor
    1 ONLINE ONLINE sfv9699
    ora.ctssd
    1 ONLINE ONLINE sfv9699 OBSERVER
    ora.diskmon
    1 OFFLINE OFFLINE
    ora.drivers.acfs
    1 ONLINE ONLINE sfv9699
    ora.evmd
    1 ONLINE INTERMEDIATE sfv9699
    ora.gipcd
    1 ONLINE ONLINE sfv9699
    ora.gpnpd
    1 ONLINE ONLINE sfv9699
    ora.mdnsd
    1 ONLINE ONLINE sfv9699
    So i saw that the crsd having some issue. I checked the alert log and crsd log. Below are the output.
    Alert <server_name>.log
    2012-10-20 15:37:51.408
    [ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
    2012-10-20 15:37:52.968
    [crsd(5188)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
    2012-10-20 15:37:52.984
    [crsd(5188)]CRS-0804:Cluster Ready Service aborted due to Oracle Cluster Registry error [PROC-26: Error while accessing the physical storage
    ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    ]. Details at (:CRSD00111:) in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
    2012-10-20 15:37:53.471
    [ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
    2012-10-20 15:37:53.472
    [ohasd(3694)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
    CRSD.log
    2012-10-20 15:37:52.456: [ CRSMAIN][3563381328] Checking the OCR device
    2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Sync-up with OCR
    2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Connecting to the CSS Daemon
    2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Getting local node number
    2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
    [   CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
    2012-10-20 15:37:52.897: [  OCRASM][3563381328]proprasmo: Error in open/create file in dg [DATA]
    [  OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
    2012-10-20 15:37:52.898: [  OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    2012-10-20 15:37:52.967: [  OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
    2012-10-20 15:37:52.967: [  OCRASM][3563381328]proprasmo: The ASM instance is down
    2012-10-20 15:37:52.968: [  OCRRAW][3563381328]proprioo: Failed to open [+DATA]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
    2012-10-20 15:37:52.968: [  OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
    2012-10-20 15:37:52.968: [  OCRASM][3563381328]proprasmcl: asmhandle is NULL
    2012-10-20 15:37:52.969: [    GIPC][3563381328] gipcCheckInitialization: possible incompatible non-threaded init from [prom.c : 690], original from [clsss.c : 5326]
    2012-10-20 15:37:52.975: [ default][3563381328]clsvactversion:4: Retrieving Active Version from local storage.
    2012-10-20 15:37:52.978: [ CSSCLNT][3563381328]clssgsgrppubdata: group (ocr_SFV9699-cluster) not found
    2012-10-20 15:37:52.978: [  OCRRAW][3563381328]proprio_repairconf: Failed to retrieve the group public data. CSS ret code [20]
    2012-10-20 15:37:52.981: [  OCRRAW][3563381328]proprioo: Failed to auto repair the OCR configuration.
    2012-10-20 15:37:52.981: [  OCRRAW][3563381328]proprinit: Could not open raw device
    2012-10-20 15:37:52.981: [  OCRASM][3563381328]proprasmcl: asmhandle is NULL
    2012-10-20 15:37:52.983: [  OCRAPI][3563381328]a_init:16!: Backend init unsuccessful : [26]
    2012-10-20 15:37:52.984: [  CRSOCR][3563381328] OCR context init failure. Error: PROC-26: Error while accessing the physical storage
    ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    2012-10-20 15:37:52.984: [ CRSMAIN][3563381328] Created alert : (:CRSD00111:) : Could not init OCR, error: PROC-26: Error while accessing the physical storage
    ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    2012-10-20 15:37:52.984: [    CRSD][3563381328][PANIC] CRSD exiting: Could not init OCR, code: 26
    2012-10-20 15:37:52.984: [    CRSD][3563381328] Done.
    =======================
    I see in the above log that saying ASM instance is down and failed to open +DATA .
    But the asm instance up and running
    SQL> select instance_name,status from v$instance;
    INSTANCE_NAME STATUS
    +ASM1            STARTED
    And we havent created any disk named DATA before the installation. We have created only below two disks
    SQL> select name,header_status from v$asm_disk;
    NAME HEADER_STATUS
    ASM_DATA MEMBER
    FLASH_RECOVERY MEMBER
    But I am seeing a diskgroup in the v$asm_diskgroup which we havent created.
    SQL> select name,state from v$asm_diskgroup;
    NAME STATE
    DATA MOUNTED
    Ya this is a second time installtion. In the first installtion we created the asmdisk as DATA. But later everything (RAW device ) was formatted and this new disks has been created and installtion again started
    [root@SFV9699 bin]# oracleasm listdisks
    ASM_DATA
    FLASH_RECOVERY
    Seems like its trying to read the old disk DATA.
    we have done asmscanning too with oracleasm scan disks. but no use.
    Where I can remove the old entry of DATA disk.
    It would be a great if a quick response get.
    Thanks
    SHIYAS M

    The permission looks fine. If it was permission issue then y it is trying to read the DATA disk which I havent created this time at all ( But created in the first installation).
    2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
    [ CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
    2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: *Error in open/create file in dg [DATA]*[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
    2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
    2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
    2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: *Failed to open [+DATA].* Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
    2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
    2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
    The only disks created are
    [root@SFV9699 dev]# oracleasm listdisks
    ASM_DATA
    FLASH_RECOVERY
    And these disks are showing part of that group also.. Not quite sure how this happened..
    what abt dropping this group.. will anything work.

  • 5 error while checking job status

    Hi,
    We are getting the following error when we are trying to check the status of the process chain through FM 'RSPC_API_CHAIN_GET_STATUS':
    5 error while checking job status.
    The real scenario is we are using an abap screen with a button on it. when the user clicks on the button we call the FM 'BP_EVENT_RAISE' to trigger the process chain. once the chain is triggered we are having an endless loop to monitor the status of the chain with FM 'RSPC_API_CHAIN_GET_STATUS' untill the chain status turns green ie G.
    Now while monitoring the status it randomly throws me the above error. it seems to work sometimes and other times it gives the popup with the said error.
    Can anybody help why we get the error.
    Regards,
    Shashank

    Hi Shanshank,
    Try to Debug the FM.
    Rgds,
    Ravi

  • Error checking no longer works when filling in a form - FF 29

    I am running FF 29.0 and when I try to fill in the following form, the error checking on the form does not work, I cannot tick the checkbox and the 'Submit' button remains 'greyed-out'.
    The problem persists in 'Safe' mode. Here is the form in question:-
    https://digitalmailbox.com.au/registration
    Hope a solution can be found.
    Regards
    Dennis W

    I don't normally use Internet Explorer but on this occasion I thought I would give it a try.
    IE 11.0.9600.17105 handles the above registration page without a problem.
    Is the problem with FF 29 or with the webpage in question?
    Regards
    Dennis W

  • CUA: One or more errors occurred while checking the status of Windows Firewall on the cluster nodes

    Cluster with 2 hosts 2012 R2
    Scheduled CAU fails with:
    CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of Windows Firewall on the cluster nodes. Review the errors for more information on how to resolve the problems.
    Error Code:-2146233088 Stack:   at MS.Internal.ClusterAwareUpdating.Util.<CheckFirewallsAsync>d__3a.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.ClusterAwareUpdating.Commands.InvokeCauRunCommand.<_ProcessCluster>d__78.MoveNext()
    If I run CAU "Analyze Readiness" ALL comes as PASS
    If I run CUA by hand on same hosts with NO change to the system (not even reboot) it finishes OK
    Anybody any ideas?
    Thanks
    Seb

    Hi,
    In some case if you disabled the connection in Windows firewall inbound of
     "Cluster aware updating" service it will can’t use the CAU.
    More information:
    Starting with Cluster-Aware Updating: Self-Updating
    http://blogs.technet.com/b/filecab/archive/2012/05/17/starting-with-cluster-aware-updating-self-updating.aspx
    What is Cluster Aware Updating in Windows Server 2012? (Part 1)
    http://blogs.technet.com/b/mspfe/archive/2013/02/06/what-is-cluster-aware-updating-in-windows-server-2012.aspx
    Cluster-Aware Updating Overview
    http://technet.microsoft.com/en-us/library/hh831694.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Actionscript error checking not working?

    Does error checking only work on actionscript files that are imported by main file?
    Also...will error checking not work on the current open file if another file contains errors?

    from where u are loading the external SWF
    possible problems are
    check the URL
    check for crossDomain problem

  • Error when trying to delete a work status option

    I am trying to delete one of our work states and I keep getting an error indicating the "operation has timed-out", has anyone seen this before?
    Thanks!

    Hi Amy,
    Whenever you try to delete a particular work state, it will delete all the work status related information from the database. This means that all the work status previously set for the transactional data will be lost. How many records do you have with teh work status set? You might be getting this error because there might be lot of records for whom the work status has been set.
    You might try to first take a bakup of all the work status related information from all the applications, then delete them. And then try to delete your work state.
    Hope this helps.

Maybe you are looking for