Error CIM_ERR_FAILED - Configure the integration server for sld
Hi,
I´m running the Configuration Wizard SLD in "PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage". In step 33/142 Configure the integration server for sld, I got following error:
Error: CIM_ERR_FAILED: Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement
Someone help me?
Regards,
The version is 7.0. I skip this step and finished with sucess. No run the step:
PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage Cancelled
PI_01_This template checks if the necessary services are started Cancelled
PI_05_This wizard will configure the integration server for sld Incompletely executed
These steps are with the same error.
Error: CIM_ERR_FAILED: Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement
Similar Messages
-
Error while configuring the application server for ESB on Jdeveloper
While i try to configure a application server connection on Jdeveloper for a remote installation of ESB (advanced mode with all the three components together and not in a cluster mode) i get the following error :
Error getting OC4J Process for: opmn-home+oc4j-10.10.36.21-6003-default:
Error connecting to OPMN (is it running?): Connection refused: connect
All the OC4J processes are running on the server as i get the following output for the ./opmnctl status command :
[oraclesoa@esboid2 bin]$ ./opmnctl status
Processes in Instance: home.localhost.localdomain
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
OC4JGroup:default_group | OC4J:oc4j_soa | 10000 | Alive
OC4JGroup:default_group | OC4J:home | 9999 | Alive
ASG | ASG | N/A | Down
HTTP_Server | HTTP_Server | 9998 | Alive
The installation is on a Linux box.
I give the following details in the connection properties box in Jdeveloper :
host : 10.10.36.21
opmn port : 6003
oc4j instance : home
Also the opmn port is correct :
[oraclesoa@esboid2 bin]$ ./opmnctl status -port
esboid2:6003
Any ideas on this?
Message was edited by:
Nilayi tried with taht.....same error.......is this an issue with port 6003 on the server........it is a linux server and I cannot telnet to it......i can use SSH though.......how to know whether the opmn port(6003) is open or not?.....
-
How to configure the Integration Server Settins?
Hi,
I am doing a scenario like Idoc 2 File, I am passing parameter of Adapter Engine is a Integration Server, and when we generate a Idoc and send to XI system using TC: WE19. XI System is not picked the Idoc, and when i am checking RWB the Adapter Framework. Please Guide me how to configure the Integration Server setting.
Regards
MohanHi,
did you checked the ur IDOC outbound status?
also check IDX5, whether it has reached XI system.
plz do check all ur settings:
1. Create RFC destination to XI in SM59 transaction
2. Create a port in we21
3. Create partner profile we20
4. we05- Idocs monitoring
XI Settings:
1. Create RFC destination to XI in SM59 transaction
2. Idx1 Port maintenance
3. Idx2 - Metadata maintenance
4. Idx5 All Idoc inbound and outbound messages
regards
Message was edited by:
Vijaya Lakshmi MV -
Error while instaling the MEP server for Single tier, using Oracle 10g DB
createDatabaseTables:
getAppServer:
============================================================
Sun Java System Mobile Enterprise Platform
============================================================
checkAppServer:
defaultDomainExists:
checkDefaultDomain:
Found "domain1", do you want to delete it? [y/n]
y
shouldDeleteDefaultDomain:
deleteDefaultDomain:
The domain (domain1) isn't running.
Domain domain1 deleted.
setup:
getDomainProperties:
Enter the name for the new Application Server domain (default: mep)
mep
Enter the Admin Port for the new domain [mep] (default: 4848)
Enter the HTTP Port for the new domain [mep] (default: 8080)
Enter the HTTPS Port for the new domain [mep] (default: 8181)
Enter the admin password for the new domain (default: adminpass)
remoba123
installGateway:
init:
getDomainProperties:
createDomain:
Using port 4848 for Admin.
Using port 8080 for HTTP Instance.
Using default port 7676 for JMS.
Using default port 3700 for IIOP.
Using default port 8181 for HTTP_SSL.
Using default port 3820 for IIOP_SSL.
Using default port 3920 for IIOP_MUTUALAUTH.
Using default port 8686 for JMX_ADMIN.
Domain being created with profile:developer, as specified by variable AS_ADMIN_P
ROFILE in configuration file.
Security Store uses: JKS
Domain mep created.
startDomain:
Attempting to start domain...
Waiting for domain to finish initializing
Waiting for status to be: mep running
init:
configureDomain:
Copying files to installation directory ...
Copying 53 files to F:\Sun\AppServer\domains\mep\ds
Copying 101 files to F:\Sun\AppServer\domains\mep\lib
Copying 1 file to F:\Sun\AppServer\domains\mep\lib
Copying 1 file to F:\Sun\AppServer\domains\mep\lib
Copying 1 file to F:\Sun\AppServer\domains\mep\lib
Copying 1 file to F:\Sun\AppServer\domains\mep\lib\classes\META-INF
init:
copyOracleJar:
Copying 1 file to F:\Sun\AppServer\domains\mep\lib\ext
Copying 1 file to F:\Sun\AppServer\domains\mep\lib\ext
server.java-config.classpath-suffix = F:\Sun\AppServer/domains/mep/ds/skin/user/
messages/i18n;F:\Sun\AppServer/domains/mep/ds/skin/admin/messages/i18n
Command create-jvm-options executed successfully.
Command create-jvm-options executed successfully.
Command create-jvm-options executed successfully.
Command create-jvm-options executed successfully.
Command create-jvm-options executed successfully.
Command create-jvm-options executed successfully.
Command create-jms-resource executed successfully.
Command create-jmsdest executed successfully.
Command create-jms-resource executed successfully.
configure:
configureMySQL:
configureOracle:
Command create-jdbc-connection-pool executed successfully.
Command create-jdbc-connection-pool executed successfully.
server.resources.jdbc-connection-pool.musicdb_jdbc_pool_oracle.match-connections
= true
configureRealm:
Command create-jdbc-resource executed successfully.
Command create-jdbc-resource executed successfully.
Command create-auth-realm executed successfully.
deployEAR:
stopDomain:
Domain mep stopped.
startDomain:
Attempting to start domain...
Waiting for domain to finish initializing
Waiting for status to be: mep running
Still waiting for status to be: mep running
Command deploy executed successfully with following warning messages: WARNING:
JDO76611: Cannot connect to database via JNDI name 'jdbc/gw': java.sql.SQLExcept
ion: Connection could not be allocated because: ORA-01017: invalid username/pass
word; logon denied.
installJCAconnectors:
stopDomain:
Domain mep stopped.
Aug 22, 2008 8:22:55 PM com.sun.jbi.installer.JBICoreInstaller main
INFO: OpenESB JBI Core Components successfully installed in F:\Sun\AppServer\jbiThe error suggests that the oracle gwdb database was incorrectly created with the wrong username and password for the database. The installation expects the gwdb database to be created with the username of "gwdbuser" and password of "gwdbpass". I would check the login credentials for this database. Also the installation expects the musicdb database to be created with the username of "musicdbuser" and password "musicdbpass". You may want to check this as well.
JDO76611: Cannot connect to database via JNDI name 'jdbc/gw': java.sql.SQLExcept
ion: Connection could not be allocated because: ORA-01017: invalid username/pass
word; logon denied.
Alan Frechette
Sun MEP SQA Engineer -
Error when installing the Integration Kit for SAP
Hello,
When installing the integration Kit I get the following error:
The installation of BO XI Integration for SAP Solutions cannot continue because WACS has been installed with BO Enterprise.
i have seen in BO-SAp Integration Kit Installation Error that I have to had selected the point Install Tomcat application server option, but I was not asked to.
I'm following the blog BusinessObjects and SAP - Part 1 of 4, and my installation screens are similar but not equal. for example, I fon't have the installation type new, but the quickk type. And I cannot select the database, too.
Of course the screen asking about the Web Application server with the option of installing the tomcat application server doesn't appear.
What have I done wrong?
What is the solution? Reinstalling everything but doing what?
Thanks and regards,
Ana.Hi Ingo,
Yes, it is BO Edge.
I have deinstalled the BO Edge sw and now I have installed it again. This time I have selected the export installation type and I have select the TOMCAT. The installation has finished successfully, but when installing the SAP integration Kit, I have the same problem. The message about the WACS already installed appears again.
What else can I do?
Thanks and regards,
Ana. -
Error in Configuring the EBS Adapter for WebCenter
Hi All,
when I'm configuring EBS Adapter for Web Center I'm getting the below Error while running the sql script AXF_EBS_SOLUTION_DATA.sql ,and I check the AXF_CONFIGS table is not available in db schema, not sure when this table will create. please find the error log detail below and give me some hint or link to overcome from this issue.
Error Log:
SQL> @AXF_EBS_SOLUTION_DATA.sql
49 /
v_formId AXF_CONFIGS.FORMID%TYPE;
ERROR at line 2:
ORA-06550: line 2, column 12:
PLS-00201: identifier 'AXF_CONFIGS.FORMID' must be declared
ORA-06550: line 2, column 12:
PL/SQL: Item ignored
ORA-06550: line 3, column 26:
PLS-00302: component 'EVENTID' must be declared
ORA-06550: line 3, column 13:
PL/SQL: Item ignored
ORA-06550: line 6, column 8:
PL/SQL: ORA-02289: sequence does not exist
ORA-06550: line 6, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 7, column 13:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 7, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 9, column 8:
PL/SQL: ORA-02289: sequence does not exist
ORA-06550: line 9, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 10, column 254:
PLS-00320: the declaration of the type of this expression is incomplete or
malformed
ORA-06550: line 10, column 254:
PL/SQL: ORA-00904: "V_FORMID": invalid identifier
ORA-06550: line 10, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 11, column 13:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 11, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 13, column 8:
PL/SQL: ORA-02289: sequence does not exist
ORA-06550: line 13, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 14, column 254:
PLS-00320: the declaration of the type of this expression is incomplete or
malformed
ORA-06550: line 14, column 254:
PL/SQL: ORA-00904: "V_FORMID": invalid identifier
ORA-06550: line 14, column 1:
PL/SQL: SQL Statement ignored
Thanks in advance
SanjeevHi Sanjeev,
You need to check if you have access to AXF_CONFIGS table. Check if you have ran GRANT_ACCESS.sql script which has below grant commands.
grant execute any type to apps;
grant create type to AXF;
grant select on AXF.AXF_CONFIGS to apps;
v_formId AXF_CONFIGS.FORMID%TYPE; means tableName.columnName%type;
so looks like when you are running AXF_EBS_SOLUTION_DATA.sql you are not able to access AXF_CONFIGS table.
Hope this helps.
Regards,
Amol Gavali. -
Error=49 from the LDAP server for GSSAPI Kerberos authentication
I am trying to find solution for ldapsearch failure with GSSAPI Kerberos authentication . I am running Sun Directory Server 5.2 P4 on a Solaris-9 sparc machine..
Steps :
bash-2.05# kinit tester1
Password for [email protected]:
bash-2.05#
When I do ldapsearch , I am getting following logs on the server :
tail -f /var/Sun/mps/slapd-bf1r-dsun-1/logs/access
[22/Feb/2007:01:44:16 -0700] conn=32 op=-1 msgId=-1 - fd=26 slot=26 LDAP connection from 10.7.30.185 to 10.7.30.16
[22/Feb/2007:01:44:16 -0700] conn=32 op=0 msgId=1 - BIND dn="uid=tester1,ou=people,dc=test1,dc=com" method=sasl version=3 mech=GSSAPI
[22/Feb/2007:01:44:16 -0700] conn=32 op=0 msgId=1 - RESULT err=14 tag=97 nentries=0 etime=0, SASL bind in progress
[22/Feb/2007:01:44:16 -0700] conn=32 op=1 msgId=2 - BIND dn="uid=tester1,ou=people,dc=test1,dc=com" method=sasl version=3 mech=GSSAPI
[22/Feb/2007:01:44:16 -0700] conn=32 op=1 msgId=2 - RESULT err=14 tag=97 nentries=0 etime=0, SASL bind in progress
[22/Feb/2007:01:44:16 -0700] conn=32 op=2 msgId=3 - BIND dn="uid=tester1,ou=people,dc=test1,dc=com" method=sasl version=3 mech=GSSAPI
[22/Feb/2007:01:44:16 -0700] conn=32 op=2 msgId=3 - RESULT err=49 tag=97 nentries=0 etime=0
[22/Feb/2007:01:44:16 -0700] conn=32 op=3 msgId=4 - UNBIND
[22/Feb/2007:01:44:16 -0700] conn=32 op=3 msgId=-1 - closing - U1
[22/Feb/2007:01:44:17 -0700] conn=32 op=-1 msgId=-1 - closed.
[22/Feb/2007:01:45:50 -0700] conn=33 op=-1 msgId=-1 - fd=26 slot=26 LDAP connection from 10.7.30.185 to 10.7.30.16
[22/Feb/2007:01:45:50 -0700] conn=33 op=0 msgId=1 - BIND dn="uid=tester1,ou=people,dc=test1,dc=com" method=sasl version=3 mech=GSSAPI
[22/Feb/2007:01:45:50 -0700] conn=33 op=0 msgId=1 - RESULT err=14 tag=97 nentries=0 etime=0, SASL bind in progress
[22/Feb/2007:01:45:50 -0700] conn=33 op=1 msgId=2 - BIND dn="uid=tester1,ou=people,dc=test1,dc=com" method=sasl version=3 mech=GSSAPI
[22/Feb/2007:01:45:50 -0700] conn=33 op=1 msgId=2 - RESULT err=14 tag=97 nentries=0 etime=0, SASL bind in progress
[22/Feb/2007:01:45:50 -0700] conn=33 op=2 msgId=3 - BIND dn="uid=tester1,ou=people,dc=test1,dc=com" method=sasl version=3 mech=GSSAPI
[22/Feb/2007:01:45:50 -0700] conn=33 op=2 msgId=3 - RESULT err=49 tag=97 nentries=0 etime=0
[22/Feb/2007:01:45:50 -0700] conn=33 op=3 msgId=4 - UNBIND
[22/Feb/2007:01:45:50 -0700] conn=33 op=3 msgId=-1 - closing - U1
[22/Feb/2007:01:45:51 -0700] conn=33 op=-1 msgId=-1 - closed.
I am using default Identiy Mapping and the ldif file looks like this :
dn: cn=default,cn=GSSAPI,cn=identity mapping,cn=config
objectClass: dsIdentityMapping
objectClass: nsContainer
objectClass: dsPatternMatching
objectClass: top
cn: default
dsMatching-pattern: ${Principal}
creatorsName: cn=directory manager
createTimestamp: 20070220045812Z
dsMatching-regexp: uid=(.*)
dsSearchBaseDN: ou=people,dc=test1,dc=com
dsMappedDN: uid=${Principal},ou=people,dc=test1,dc=com
modifiersName: uid=admin,ou=administrators,ou=topologymanagement,o=netscaperoo
t
modifyTimestamp: 20070221082740Z
Following is the snoop for LDAP on the server :
bash-2.05# !snoop
snoop -v port 389 | grep LDAP
Using device /dev/eri (promiscuous mode)
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation *[APPL 0: Bind Request]
LDAP: [Version]
LDAP: [Object Name]
LDAP: uid=tester1,ou=people,dc=test1,d
LDAP: c=com
LDAP: Authentication: SASL *[3]
LDAP: [OctetString]
LDAP: GSSAPI
LDAP: [OctetString]
LDAP: *** NOT PRINTED - Too long value ***
LDAP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation *[APPL 1: Bind Response]
LDAP: [Result Code]
LDAP: SASL Bind In Progress
LDAP: [Matched DN]
LDAP: [Error Message]
LDAP: SASL Credentials [7]
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation *[APPL 0: Bind Request]
LDAP: [Version]
LDAP: [Object Name]
LDAP: uid=tester1,ou=people,dc=test1,d
LDAP: c=com
LDAP: Authentication: SASL *[3]
LDAP: [OctetString]
LDAP: GSSAPI
LDAP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation *[APPL 1: Bind Response]
LDAP: [Result Code]
LDAP: SASL Bind In Progress
LDAP: [Matched DN]
LDAP: [Error Message]
LDAP: SASL Credentials [7]
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation *[APPL 0: Bind Request]
LDAP: [Version]
LDAP: [Object Name]
LDAP: uid=tester1,ou=people,dc=test1,d
LDAP: c=com
LDAP: Authentication: SASL *[3]
LDAP: [OctetString]
LDAP: GSSAPI
LDAP: [OctetString]
LDAP:
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation *[APPL 1: Bind Response]
LDAP: [Result Code]
LDAP: 1
LDAP: Invalid Credentials
LDAP: [Matched DN]
LDAP: [Error Message]
LDAP: SASL(-1): generic failure:
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation [APPL 2: Unbind Request]
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
Please help me on how to fix this issue.
Thanks,
RadhakrishnanI did reply on the other thread of yours...
Ludovic -
Newbee's question: Error connecting to the management server for the first time
Dear all, I am very new to the oralce world and got stuck today the first time I install oracle 8i on my win2k pro.
After the installation, I was trying to connect the Enterprise Manager Console for the first time, using the default user name sysman and password oem_temp (correct?). The problem is that I don't know exactly what is a management server, and what name it should be called. I named the database/sid name orarem, under D:\Oracle\admin\OraRem, does it have something to do with this issue?
I only installed the oracle enterprise server edition 8.1.6.0.0, not the Client part, will that matter if I only wanna run oracle on my stand alone desktop as a testing procedure for now?
Any help would be really appreciated!!Bingo!! I had been trying dumping various .plist files
Not surprisingly i was a little hesitant about throwing the Airport folder in the bin.
First thing I did was to check it had been replaced on restarting!
Glad to say that "Check for updates" is now doing its thing.
I don't know why it gave me such grief, I just felt it could develope into something nasty down the line.
Thank you again.
Unfortunately they don't seem to have a points system for this topic.
Your fix should be available in Google from now on -
RM Error: No ports that send to the Integration Server could be found
Hi,
In the Runtime Monitor, End-to-End Monitoring Configuration, Logon to XI, Display-->
It is showing the following error:
No ports that send to the Integration Server could be found for the following ALE logical systems:
ZSEND765: Unable to log on to system IDS in language en with user PIRWBUSER
Plz help in solving this.
Regards,
BalajiHi,
please check if user PIRWBUSER is locked and if he has enough rights:
http://help.sap.com/saphelp_nw2004s/helpdata/en/06/5d1741b393f26fe10000000a1550b0/frameset.htm
Regards
Patrick -
Adobe LiveCycle ES 8.2 Installation Error can't configure the App Server from Config Manager
Hello All-
We are trying to install the Adobe LiveCycle ES 8.2 SP2 and we are getting some issues while configuring the Application Server from the Config Manager, not sure why are those showing up, we never had these issues before when we installed 8.0, please look at the lcm log and the screenshot I provided for the errors which we are getting.
We are trying to configure the remote Application Server WebSphere on Linux from my machine which is on Windows and i made the target Application Server as WebSphere and target platform as linux when i initially installed the livecycle media.
The LCM logs say it failed to run the jacl scripts in the LiveCycle root directory and we wonder why is it pointing for the target Application Server to the Application Server which resides on my machine rather than it should point to the one on server. I am not sure what's going on and we did exactly what we did for 8.0.
Below are the environment details where we are trying to install.
Adobe LiveCycle ES: 8.2 SP2
Database: IBM DB2 9.1 FP4.
JVM Version and Vendor: 1.5.0 IBM Corporation
Application server: IBM WebSphere Application Server/6.1.0.19
Operating System: Linux
Hardware: x86 .
Any help will be appreciated!
Thanks-
Karthik.Hi All,
Even i was facing the same issue but i was able to resolve it.
Although the earlier reply from karthik_chowdary was sent way back in 2008 and i think would have got resolved till now, but still the resolution which i have found is
The port i was using on the app server conf screen was that of application server HTTP Port.
But here in case of WebSphere ND, we need to use port specified in WAS UI > System administrator > Deployment manager > Ports
Try using that by default it is 8879.
And this resolved the issue.
~Hkin -
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)
while proview the report i will get this error am using sql server 2008R2,
can u plesae hlep me out for this
<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>4880</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile. -
Error configuring the Kanaka Server via Wizard in Step 2 / 4
Testing the Kanaka Client for Mac we have an error configuring the Kanaka Server via Setup Wizard in Step 2 of 4:
After selecting the context where the Kanaka Proxy Object and the Administrator Group should be created and clicking on the next button the Wizard displays an error message >Unknown Directory services error has occurred< and stops. We are not able to complete the Wizard and do not find any message in the log(s) and eDirectory traces which let us know what is going wrong.
Any help would be appreciated.
Werner Seifert
Information Management
Johannes Kepler University Linz/Austria
werner dot seifert at jku dot atOn 24/01/2012 06:46, wseifert wrote:
> Testing the Kanaka Client for Mac we have an error configuring the
> Kanaka Server via Setup Wizard in Step 2 of 4:
>
> After selecting the context where the Kanaka Proxy Object and the
> Administrator Group should be created and clicking on the next button
> the Wizard displays an error message>Unknown Directory services error
> has occurred< and stops. We are not able to complete the Wizard and do
> not find any message in the log(s) and eDirectory traces which let us
> know what is going wrong.
>
> Any help would be appreciated.
Does the container you're adding the Kanaka Proxy object to have a
Universal Password policy assigned?
HTH.
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details. -
I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated.
Thank You.
The code of the sample RDL is shown below:
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
</DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
<ReportParameter Name="machine_id">
<DataType>String</DataType>
<Prompt>machine_id</Prompt>
</ReportParameter>
<ReportParameter Name="from_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>From Date</Prompt>
</ReportParameter>
<ReportParameter Name="to_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>To Date</Prompt>
</ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
<ReportItems>
<Table Name="table1">
<DataSetName>Main_Report</DataSetName>
<TableGroups>
<TableGroup>
<Header>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Textbox Name="textbox2">
<rd:DefaultName>textbox2</rd:DefaultName>
<ZIndex>1</ZIndex>
<Style>
<TextAlign>Left</TextAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingBottom>2pt</PaddingBottom>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<CanGrow>true</CanGrow>
<Value>=Fields!syscode.Value</Value>
</Textbox>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
<RepeatOnNewPage>true</RepeatOnNewPage>
</Header>
<Grouping Name="table1_Group1">
<PageBreakAtEnd>true</PageBreakAtEnd>
<GroupExpressions>
<GroupExpression>=Fields!syscode.Value</GroupExpression>
</GroupExpressions>
</Grouping>
</TableGroup>
</TableGroups>
<Details>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Subreport Name="subreport1">
<Parameters>
<Parameter Name="machine_id">
<Value>=Fields!machine_ip.Value</Value>
</Parameter>
<Parameter Name="syscode">
<Value>=Fields!syscode.Value</Value>
</Parameter>
<Parameter Name="from_date">
<Value>=Parameters!from_date.Value</Value>
</Parameter>
<Parameter Name="to_date">
<Value>=Parameters!to_date.Value</Value>
</Parameter>
</Parameters>
<ReportName>Holding_Summary_Multi_Period</ReportName>
</Subreport>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
</Details>
<TableColumns>
<TableColumn>
<Width>10.5in</Width>
</TableColumn>
</TableColumns>
<Height>0.5in</Height>
</Table>
</ReportItems>
<Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
<DataSet Name="Main_Report">
<Query>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
<CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
<QueryParameters>
<QueryParameter Name="@machine_id">
<Value>=Parameters!machine_id.Value</Value>
</QueryParameter>
</QueryParameters>
<DataSourceName>DataSource1</DataSourceName>
</Query>
<Fields>
<Field Name="syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>syscode</DataField>
</Field>
<Field Name="display_name">
<rd:TypeName>System.String</rd:TypeName>
<DataField>display_name</DataField>
</Field>
<Field Name="customer_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>customer_syscode</DataField>
</Field>
<Field Name="account_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>account_syscode</DataField>
</Field>
<Field Name="machine_ip">
<rd:TypeName>System.String</rd:TypeName>
<DataField>machine_ip</DataField>
</Field>
</Fields>
</DataSet>
</DataSets>
<Code>Shared offset As Integer
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
offset = pagenumber - 1
End If
Return pagenumber - offset
End Function
</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
<ReportItems>
<Image Name="image1">
<Sizing>Fit</Sizing>
<Left>8.875in</Left>
<MIMEType />
<Width>1.5in</Width>
<Source>External</Source>
<Style />
<Value>bottom_right_logo.gif</Value>
</Image>
</ReportItems>
<Height>0.5in</Height>
<PrintOnLastPage>true</PrintOnLastPage>
<PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
when i click on manage for .rdl file, its throwing error , as
"An internal error occurred on the report server. See the error log for more details. (rsInternalError)
Object reference not set to an instance of an object.
please help me with this -
Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD on a Windows 2008 server.
The global query block list is a feature that prevents attacks on your network by blocking DNS queries for specific host names. This feature has caused the DNS server to fail a query with error code NAME ERROR for wpad.contoso.com. even though data
for this DNS name exisits in the DNS database. Other queries in all locally authoritative zones for other names that begin with labels in the block list will also fail, but no event will be logged when further queries are blocked until the DNS server
service on this computer is restarted. -
We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means
Hello,
Did you means that you use the Windows Azure Virtual Machine DNS name as the server name in the Reporting Server Web Services URL?
For example:
Report server:http://uebi.cloudapp.net/reportserver
Report manager:http://uebi.cloudapp.net/reports
If you want to connect to Report Manager on the virtual machine from a remote computer, you should create a virtual machine TCP Endpoint and open the port in the virtual machine’s firewall. By default, the report server listens for HTTP requests
on port 80.
Reference:http://msdn.microsoft.com/en-us/library/jj992719.aspx#bkmk_ssrs_connect_2_remote_RM
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support
Maybe you are looking for
-
It is Posible that I run 2 or more user account at the same time from one PC???
I have core i7 2600 8GB ram based PC, and I want to add another display, keyboard & mouse to run another account on my same pc any way to run both account at same time??? or any other way???
-
Change the default year Begining from 'January" to "June"
Hi all, One of our requirements is: The Financial year starts from June 1st and ends in May. So If the user selects 02-Jun-2010, Week_of_Year Function should show him as *'1'* Can you please tell me where these default values for Year are stored? Can
-
Deployment process for Large ALSB/OSB project
Hi, I am searching for some details or article about deployment of alsb/osb projects (number of projects) as part of build process. How projects manages when number of different alsb projects need to be build, customized and imported into different e
-
Hi All, Can someone help me with the docs. on block specification in oracle 9i. Thanks pals regards aneej
-
Hi Friends, I want to create a process chain.If i need to create an Event based ( in the start process ) where am i going to create the event. How to decide when we have to go for event based start process. Can you please send me the process in creat