Error :CIM_ERR_FAILED:HTTP response code:501 Not Implemented_Unsupporte

Hello gurus
iam facing the below error when trying to do the initial Setup on PI 7.1 running on Windows 64bit,Oracle
Error :CIM_ERR_FAILED:HTTP response code:501 Not Implemented_Unsupported-protocol version
i have checked the following notes 1115280,939592,764176,1309239 but cant find a solution to this.i have tried to add the  Businness systems manually and re excute the steps but no luck.
any ideas are welcome

Thanks for your response .I updated the CR content up to the latest but the problem still existed.
I did a work around althought that was not part of the landscape.I reexecuted the post installation on to the local sld it works without a problem.
There are notes that  states that you can use a remote sld  but tried all that  but still doesn`t work so  reinstalled the PI system several times on different boxes thinking that maybe a patch somewhere is causing the problem.
I sent an OSS to SAP and they provided a link to help of which its just the same info that is in the notes.So then they came back later and said that i should reboot the server.......
but  its now working as a local SLD not REMOTE (my sld on Solution manager not PI)

Similar Messages

  • Error: CIM_ERR_FAILED: HTTP response code: 404 Not found

    Hi, we had finished to install Sap Netweaver Usage type PI (Abap +Java), now we are running Post Installation task, but we are getting an error when we ran "Configuration Wizard"
    In the step: Configure the integration server for sld
    Error: CIM_ERR_FAILED: HTTP response code: 404 Not found
    Any Idea?
    Thanks
    Elias Mendoza
    The following lines are part of the error log:
    Debug Events
    InvokeService:Configure the integration server for sld
    Library: sap.com/tclmctctemplateslevel1_4_tcc
    SourcePath ./PIPostInstallProcess/configureIntegrationServer8
    Time 2008/07/07 at 20:47:33
    WSDL /content/NetWeaver/PI/service/SLDConfig_configureIntegrationServer_configureIntegrationServer.wsdl
    Execute Java Service
    Library:sap.com/tclmctcutilbasic_ear
    Class:com.sap.ctc.util.SLDConfig
    Method:void com.sap.ctc.util.SLDConfig.configureIntegrationServer(java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String)
    InvokeService- Result: Failed
    Exception Message:CIM_ERR_FAILED: HTTP response code: 404 Not found
    Exception Class:com.sap.sld.api.wbem.exception.CIMCommunicationException

    Dear
    Possibly CIM content is not uploaded to your SLD.
    Is your SLD running properly ?
    Did you install this SLD as a local SLD at the installation of your SAP system (along with other stuff using sapinst) ?
    <removed_by_moderator>
    Kind regards
    Tom
    Edited by: Julius Bussche on Jul 8, 2008 1:55 PM

  • CIM_ERR_FAILED: HTTP response code: 404 Not found

    Hello!
    We are installing NW7.0 PI with local SLD as HA system with virtual name and after patching it up to SPS17 we started Configuration wizard
    PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage
    and on step 33/142 Configure the Integration server for sld  we got an error:
    CIM_ERR_FAILED: HTTP response code: 404 Not found
    and from log:
    InvokeService:Configure the integration server for sld
    Library: sap.com/tclmctctemplateslevel1_4_tcc
    SourcePath ./PIPostInstallProcess/configureIntegrationServer8
    Time 2009/05/07 at 10:45:31
    WSDL /content/NetWeaver/PI/service/SLDConfig_configureIntegrationServer_configureIntegrationServer.wsdl
    Execute Java Service
    Library:sap.com/tclmctcutilbasic_ear
    Class:com.sap.ctc.util.SLDConfig
    Method:void com.sap.ctc.util.SLDConfig.configureIntegrationServer(java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String)
    Arguments
    SID : XRQ 
    CLIENT : 001 
    HOST : capitate 
    PORT : 8032 
    SLDUSER : PISUPER 
    SLDPASSWORD : % secure content % 
    InvokeService- Result: Failed
    Exception Message:CIM_ERR_FAILED: HTTP response code: 404 Not found
    Exception Class:com.sap.sld.api.wbem.exception.CIMCommunicationException
    Stacktrace
    com.sap.sld.api.wbem.client.WBEMHttpRequestSender.newCommunicationException(WBEMHttpRequestSender.java:414)
    com.sap.sld.api.wbem.client.WBEMHttpRequestSender.processResponse(WBEMHttpRequestSender.java:323)
    com.sap.sld.api.wbem.client.WBEMHttpRequestSender.send(WBEMHttpRequestSender.java:142)
    This error would be normal with Central SLD but we have local SLD. Is there any parameters for systems with virtual name which is not configured?
    Regards,
    Mart

    Thanks for answering.
    Configuration is done by the Post-Installation Guide - SLD of SAP NetWeaver 7.0   , but there is still same error.
    It seems, that point is in CPA Cache full refresh, because in SLD Java system on app.server still shows his patchlevel 9 not 17 .
    CPA Cache refresh gives an error:
    The XML page cannot be displayed
    Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
    Invalid at the top level of the document. Error processing resource 'http://capitate:53200/CPACache/refresh?mode=full'. Li...
    CPA cache refresh (mode=full) successfully executed in 703 milliseconds.
    ^
    Regards,
    Mart

  • Received HTTP response code 404 : Not Found

    I am attempting to pass a file through XI into an IDoc to ECC.  I have tested the mapping, and that works fine.  I have also tested the configuration in the integration builder and it seems to be fine.  However, when the file is picked up by XI from the directory, processed by XI, and then sent to ECC, an error occurs in the runtime workbench:
    Transmitting the message to endpoint http://server:port/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
    The error leads me to believe that the system cannot be found, or there is a privelage issue with the service user attempting to log onto ECC.  However I believe I have set up the RFC connection correctly, and the service user should be fine.
    Does anyone know what may be causing this?  I am using the IDoc adapter for the reciever communication channel.  I have set the RFC destination (and tested it in SM59, works fine) and the port (I assume this is the port in WE21?).  Not sure where to look...

    Being that the error says:
    Transmitting the message to endpoint http://server:port/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
    I am trying to understand what this means.  Can anyone explain to me why the message is getting sent to this address?  I assume that the AFW is coming into play because I am using the IDoc adapter, hence the adapter framework.  Is this true?  Should the AFW be showing up, or do you think there is another issue?
    Mainly I want to know if this is more of a basis issue, or a configuration problem with the interface in XI?

  • Help: Received HTTP response code 404 : Not Found

    Transmitting the message to endpoint http://chmsxd42:52200/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
    Our senario is a simple file transfer one, no object has been created in IR.
    While we run the wizard, we just put the dummy interface name and namespace in the interface and namespace blanks.
    After we activate the objects, the source files were picked up and deleted but there is no file created in the target directory, and we got the error message listed at the top.
    Does anyone has some clue about this? Please help.
    Thanks a lot.
    Aditya Babu

    Hi,
    The port of Integration Engine is 80XX, and so 8001.
    In the SLD you must to select the Business System of XI and there you can just set the corret Pipeline URL.
    It means you AE is unable to communicate with IE.
    t-code SMICM..check the HTTP port No:
    open the SMICM code...just right click anywhere in the window...then click on the Services..it will show u the HTTP and HTTPs port no.
    THen from SLD --Business Landscape --your Business System..chek the Pipeline URL http://<host>:<port>/sap/xi/engine?type=entry
    the HTTP port that u will see in the SMICM should be same in the pipeline URL
    Have you checked this one,...
    /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    Go through this link which as the information of all HTTP errors in XI
    /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    Thanks
    Vikranth

  • Getting HTTP response code: 404  Not Found  while playback

    Hi Folks,
    Am creating a loadtest script on Oracle Empirica application by using web protocol with only 6 steps. While play back am getting the following error
    Error Code:INVALID_HTTP_RESPONSE_CODE
    Error Detail:
    oracle.oats.scripting.modules.http.api.exceptions.ThinBrowserException: HTTP response code: 404 Not Found
         at oracle.oats.scripting.modules.http.api.exceptions.ThinBrowserException.createErrorInvalidHttpResponseCode(ThinBrowserException.java:66)
         at oracle.oats.scripting.modules.http.api.internal.ResponseCodeValidator.validate(ResponseCodeValidator.java:21)
         at oracle.oats.scripting.modules.http.api.internal.AbstractHTTPService.validate(AbstractHTTPService.java:993)
         at oracle.oats.scripting.modules.http.api.internal.AbstractHTTPService.navigate(AbstractHTTPService.java:595)
         at oracle.oats.scripting.modules.http.api.internal.AbstractHTTPService.doNavigate(AbstractHTTPService.java:504)
         at oracle.oats.scripting.modules.http.api.internal.AbstractHTTPService.doNavigate(AbstractHTTPService.java:494)
         at oracle.oats.scripting.modules.http.api.internal.InternalHTTPService.navigate(InternalHTTPService.java:1930)
         at oracle.oats.scripting.modules.http.api.internal.InternalHTTPService.navigate(InternalHTTPService.java:1867)
         at oracle.oats.scripting.modules.http.api.internal.InternalHTTPService.get(InternalHTTPService.java:1975)
         at oracle.oats.scripting.modules.http.api.internal.InternalHTTPService.get(InternalHTTPService.java:1966)
         at oracle.oats.scripting.modules.http.api.HTTPService.get(HTTPService.java:2426)
         at script.run(script.java:153)
         at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:320)
         at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:726)
         at java.lang.Thread.run(Thread.java:619)
    please help me to fix this issue.
    Thanks,
    Jay.

    I have checked this link: /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    The SLD and the Integrationserver pipeline URL the Port was 50100 and the HTTP port in the RFC Dest. is 8001.
    Witch port must entered in the URL, 50100 or 8001?
    If the port must be 8001, how could i change the URL in the SLD? Must the business System Integrationserver be deleted and new entered witch the right URL?
    Thank you for all answers.
    regards
    Jochen Schütze

  • HTTP response Code 404: Not Found

    Hallo,
    I want to get a Email from the account to my SAP-System.
    The Email is downloaded in the XI-System and then directly the following error is shown.
    "Fehler beim Übertragen zum Endpunkt /sap/xi/engine?type=entry über die Verbindung AFW. Grund: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found".
    What could i do?
    Thank you.
    Jochen Schütze

    I have checked this link: /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    The SLD and the Integrationserver pipeline URL the Port was 50100 and the HTTP port in the RFC Dest. is 8001.
    Witch port must entered in the URL, 50100 or 8001?
    If the port must be 8001, how could i change the URL in the SLD? Must the business System Integrationserver be deleted and new entered witch the right URL?
    Thank you for all answers.
    regards
    Jochen Schütze

  • RecoverableException: Received HTTP response code 404 : Not Found

    Hi All,
    I am getting the below error while doing Scenario JDBC to ABAP Proxy.
    Transmitting the message to endpoint http://XXXXXXXX:50000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
    Can any body tell me:
    1. Ideally what should be the port if it is an error due to Port?
    2. I am not able to see the messages in SXMB_MONI?
    3. What is the Flow of my message in the above mentioned Scenario I mean to say from which Engine to which engine?
    Thanks,
    RP

    Hi Rajesh,
    Do I need to mention  Port 8XXX in my Pipeline URL " http://XXXXXXXX:50000/sap/xi/engine?type=entry"?
    I have checked in
    1. SMICM there is HTTP Service port 8XXX
    2. SLD - PI Business System - Pipeline URL is "http://XXXXXXXX:50000/sap/xi/engine?type=entry"
    3. In SXMB_ADM - Corresponding Integ. Server = "http://XXXXXXXX:50000/sap/xi/engine?type=entry"
    Now tell me is these entries are Ideal??
    Also is thr any place where I need to check for Port and URL??
    Thanks for quick response.
    RP

  • File- XI- RFC (Error: Received HTTP response code 500..)

    Hi,
    I am working on File->XI->RFC  scenario, getting Processed Successfully status in "SXI_MONITOR".
    But Data is not posted in SAP R/3. I check   <b>Runtime Workbench  </b> Getting following Error in one step.
    Can any one help me in analyzing the error.....??????
    2006-06-09 14:36:32 Success output 1149888992513 Channel WEBMETHOD_SENDER_SOAPFMTEST: Send binary file "/usr/sap/transx42/data/xi_input.xml". Size 175 with QoS EO
    2006-06-09 14:36:38 Success output 1149888998592 Application attempting to send an XI message asynchronously using connection AFW.
    2006-06-09 14:36:39 Success output 1149888999757 Trying to put the message into the send queue.
    2006-06-09 14:36:40 Success output 1149889000823 Message successfully put into the queue.
    2006-06-09 14:36:40 Success output 1149889000824 The application sent the message asynchronously using connection AFW. Returning to application.
    2006-06-09 14:36:41 Success SAPEngine_System_Thread[impl:5]_12 1149889001577 The message was successfully retrieved from the send queue.
    2006-06-09 14:36:41 Success output 1149889001591 File "/usr/sap/transx42/data/xi_input.xml" deleted after processing
    2006-06-09 14:36:41 Success SAPEngine_System_Thread[impl:5]_12 1149889001745 The message status set to DLNG.
    <b>2006-06-09 14:37:47 Error SAPEngine_System_Thread[impl:5]_12 1149889067522 Transmitting the message to endpoint http://SAPR3001.bently.com:8042/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 500..</b>
    2006-06-09 14:37:47 Success SAPEngine_System_Thread[impl:5]_12 1149889067585 The asynchronous message was successfully scheduled to be delivered at Fri Jun 09 14:42:47 PDT 2006.
    2006-06-09 14:37:47 Success SAPEngine_System_Thread[impl:5]_12 1149889067695 The message status set to WAIT.
    2006-06-09 14:42:47 Success SAPEngine_System_Thread[impl:5]_9 1149889367587 Retrying to send message. Retry: 1
    2006-06-09 14:42:47 Success SAPEngine_System_Thread[impl:5]_9 1149889367587 The message was successfully retrieved from the send queue.
    2006-06-09 14:42:47 Success SAPEngine_System_Thread[impl:5]_9 1149889367643 The message status set to DLNG.
    2006-06-09 14:42:48 Success SAPEngine_System_Thread[impl:5]_9 1149889368435 The message was successfully transmitted to endpoint http://SAPR3001.bently.com:8042/sap/xi/engine?type=entry using connection AFW.
    2006-06-09 14:42:48 Success SAPEngine_System_Thread[impl:5]_9 1149889368471 The message status set to DLVD.
    2006-06-09 14:42:48 Success SAPEngine_System_Thread[impl:5]_9 1149889368472 The message was successfully delivered.
    Thanks & Regards

    Hi Umesh,
    I think, the reason is because of huge number messages ..
    Also just go to RFC adapter, activate the adapter,refresh the cache and try it..
    following guide will help you to solve problem~
    https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
    Just refresh the cache-The following guide will help you on that~
    https://websmp101.sap-ag.de/~sapidb/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
    Refer these SAP notes- 807000,803145
    (some hints)
    Regards,
    Moorthy

  • XML Form Build Error Unexpected http response code 500: Internal Server Err

    Hi
    I have the following error message when i am trying to load  XML Form Builder
    "Unexpected http response code 500: Internal Server Error "
    When i am trying to Run the test its shows me the follwoing error log.
    Test Environment: XML Forms Builder Environment Check *
    Start Time: 2008-09-17 15:09:53                       *
    End Time: 2008-09-17 15:09:59                         *
    - Test: Java Environment
    - OK
    -      Start Time: 2008-09-17 15:09:53
    -      End Time: 2008-09-17 15:09:53
    -      Java Runtime Version is 1.6.0_02
    - Test: Connection Tests
    - ! Test Failed !
    -      Start Time: 2008-09-17 15:09:53
    -      End Time: 2008-09-17 15:09:59
    -      A test in the suite failed
         - Test: Download XML Forms Builder Jar
         - OK
         -      Start Time: 2008-09-17 15:09:53
         -      End Time: 2008-09-17 15:09:55
         -      Successfully loaded XML Forms Builder Jar from http://zhmscad8.whirlpool.com:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/xmlforms/km.appl.xmlforms.xfbuilder_core.jar, Version 6.4.1
         - Test: Download SAP XML Toolkit Jar
         - OK
         -      Start Time: 2008-09-17 15:09:55
         -      End Time: 2008-09-17 15:09:59
         -      Successfully loaded SAP XML Toolkit Jar from http://zhmscad8.whirlpool.com:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/xmlforms/sapxmltoolkit.jar
         - Test: XML Forms Builder Version
         - ! Test Failed !
         -      Start Time: 2008-09-17 15:09:59
         -      End Time: 2008-09-17 15:09:59
         -      Unexpected http response code 500: Internal Server Error
         - Test: Load Global Settings
         - Not Started
         -      This test depends on the test "XML Forms Builder Version", which did not complete successfully
         - Test: Load Project List
         - Not Started
         -      This test depends on the test "XML Forms Builder Version", which did not complete successfully
    Please let me know the how to slove this Problem.
    Thanks
    Mmukesh
    Edited by: mmukesh reddy on Sep 17, 2008 9:29 PM

    Hi Koti Reddy
    That is not related to my issue.
    Here this error only comming for two users in my group.
    The environment every thing working for remaining user.  But only that two users are facing the problem.
    So please let me know is there any security issues.
    Thanks
    mmukesh

  • XML Form Build Error Unexpected http response code 500: Error

    Dear All,
    I am facing the error when I am starting the XML Forms Builder.The tool checks the environment in which the XML Forms Builder is running (xfbuildertest.html)
    I am getting the following result :
    - Test: Connection Tests
    - ! Test Failed !
    - A test in the suite failed
    - Test: XML Forms Builder Version
    - ! Test Failed !
    - Unexpected http response code 500: Internal Server Error
    Test: Load Global Settings
    - Not Started
    - This test depends on the test "XML Forms Builder Version", which did not complete successfully
    - Test: Load Project List
    - Not Started
    - This test depends on the test "XML Forms Builder Version", which did not complete successfully
    Please help me.
    Regards
    Pravesh

    Hi Lorcan.
    So what exactly happens when you try to start XML Forms builder, do you get an actual error or does it just not start at all?
    > Actually the News are not getting displayed . The HTML (Html tages)are not getting rendered properly in XML Form Builder.
       This news are perfectly working in other environment  (Dev/Qlty) but not in Production .. where i am facing the issue of rendering the news ( not in correct format as expected)
    It is appearing as link. where as in my other environment the Text in proper HTML format.
    (Link of News appearing in production) whereas in Dev/Qlty proper text with Heading/Font/Colour appears. Or are you only seeing errors when you run the environment check?
    > I am getting the errors when running the environment check on in Production but not in Development/Quality.
    Did you try it on different clients or with different users? Is this a new installation or have you recently upgraded? Are all your components on the same SP level?
    > This is new installation but SP level are exactly same across the system(Dev/Qlty/Prod).
    Also the check the settings and found proper..
    Root Directory * /usr/sap/<System-ID>/SYS/global/config/cm/etc*
    Please let me know am I missing something..
    Why its not running on my production system.
    Regards
    Pravesh

  • RNIF Error - BAD HTTP RESPONSE CODE RECEIVED: HTTP/1.1 500 Internal Server

    Hi,
    I am trying to do a scenario on RNIF. While testing, we trigger the PIP from STK, But we are getting the error as BAD HTTP RESPONSE CODE RECEIVED.
    Java Exception     com.rosettanet.rnstt.outbound.RosettanetException: BAD HTTP RESPONSE CODE RECEIVED: HTTP/1.1 500 Internal Server Error
    Trace     com.rosettanet.rnstt.outbound.RosettanetException: BAD HTTP RESPONSE CODE RECEIVED: HTTP/1.1 500 Internal Server Error at com.rosettanet.rnstt.outbound.Outbound.checkResponseCode(Outbound.java:342) at com.rosettanet.rnstt.outbound.Outbound.checkResponse(Outbound.java:306) at com.rosettanet.rnstt.outbound.Outbound.sendMessage(Outbound.java:284) at com.rosettanet.rnstt.controller.TestController.handleSocketOutbound(Unknown Source) at com.rosettanet.rnstt.controller.TestController.handleOutbound(Unknown Source) at com.rosettanet.rnstt.controller.TestController.runTestCases(Unknown Source) at com.rosettanet.rnstt.controller.TestController.run(Unknown Source) at com.rosettanet.rnstt.controller.TestController.main(Unknown Source)
    Any help on this? What could be the reason for this error?
    Thanks in advance...
    Vasu

    Hi All,
             I too getting the same problem. Any inputs from anybody?
    Thanks & Regards,
    Purshothamm

  • HTTP Response code 404 - RFC Adapter des not connect to Integration engine

    Hi,
    I seem to have problem with XI Integration engine. My integration process does not go beyond adapter engine and it fails with the following error,
    Begining of the erorr report -
    2006-01-23 13:35:53 Success RFC adapter received sRFC for ZSCEN2_XI from <sysno>/<client>. Attempting to send message synchronously
    2006-01-23 13:35:54 Success Application attempting to send an XI message synchronously using connection AFW.
    2006-01-23 13:35:55 Success Trying to put the message into the call queue.
    2006-01-23 13:35:55 Success Message successfully put into the queue.
    2006-01-23 13:35:55 Success The message was successfully retrieved from the call queue.
    2006-01-23 13:35:55 Success The message status set to DLNG.
    2006-01-23 13:35:55 Error Returning synchronous error notification to calling application: Received HTTP response code 404 : Not Found.
    2006-01-23 13:35:55 Error Transmitting the message using connection http://<host>:55300/sap/xi/engine?type=entry failed, due to: Received HTTP response code 404 : Not Found.
    2006-01-23 13:35:55 Error The message status set to FAIL.
    2006-01-23 13:35:55 Error Returning to application. Exception: Received HTTP response code 404 : Not Found
    end of error report -
    and the runtime workbench does not connect to Integration engine and fails with the following error,
    begin error report -
    javax.ejb.CreateException: Unable to log on to system XID in language en with user XIRWBUSER
         at com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean.ejbCreate(IntegrationEngineMonitoringBean.java:374)
         at com.sap.aii.mdt.server.IntegrationEngineHomeImpl10.create(IntegrationEngineHomeImpl10.java:185)
         at com.sap.aii.mdt.server.IntegrationEngineHome_Stub.create(IntegrationEngineHome_Stub.java:56)
    end of report -
    Have anyone experienced the same issue?. Are we missing some post installation configuration?.
    Thanks in advance
    Regards,
    Arul

    HI Anulraja,
    Your Adapter Engine searches the pipeline url of the integration engine from the SLD.
    Check the Bussiness System in Sld , which you'll have defined for XI Server.
    It should have ROLE : Integration Server And
    pipeline url: http://ux0800:55300/sap/xi/engine?type=entry
    should be this if your http port is 55300.
    Check if this url is right in SLD-Bussiness System.
    You can check the exact http port in transaction sxmb_adm.
    Go to Integration engine configuration and then click on check icon(F7).
    It should match with that provided in the BS in SLD.
    By default it should be 8000.
    Check all these things and then try.
    Regards,
    Yomesh

  • Received HTTP response code 500 : Error during conversion of XI message

    hi
    Facing the error , "Received HTTP response code 500 : Error during conversion of XI message"
    This is the fist time i am configuring the sender soap ( Axis Framework in the SOAP Adapter) (Quality of service Best effort) communication channel and i am getting the above error did any body face this error.
    01.09.2011 12:02:32     Information     The message status was set to DLNG.
    01.09.2011 12:02:32     Error     SOAPFault received from Integration Server. ErrorCode/Category: XIServer/ATTRIBUTE_INITIAL; Params: Manifest cid:6D90482BF678436D75928FC8B9930519; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Attribute Manifest cid:6D90482BF678436D75928FC8B9930519 is initial
    01.09.2011 12:02:32     Error     Transmitting the message using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during conversion of XI message.
    regards
    sandeep
    Edited by: pendyalas on Sep 1, 2011 12:20 PM

    I found a link with respect to similar error , sap note 1522630 has been used to resolve this error.
    i will try and see if it works.
    AXIS Sender Adapter Failure after upgrade to PI 7.11 SP06
    regards
    sandeep

  • HTTP response code: 500  Internal Server Error

    Hi,
    I am working on OpenScript 8.5.
    1) When i play back the script i got the following error message in result view.
    oracle.oats.scripting.modules.http.api.exceptions.ThinBrowserException: HTTP response code: 500  Internal Server Error
    * see the Result View :*
    +15:41:09,973 INFO [1] Step: [4] Safexpress PROPEL+
    +15:41:10,066 ERROR [1] Error in section Run+
    oracle.oats.scripting.modules.http.api.exceptions.ThinBrowserException: HTTP response code: 500  Internal Server Error
    +     at oracle.oats.scripting.modules.http.api.exceptions.ThinBrowserException.createErrorInvalidHttpResponseCode(ThinBrowserException.java:43)+
    +     at oracle.oats.scripting.modules.http.api.HTTPService.validate(HTTPService.java:574)+
    +     at oracle.oats.scripting.modules.http.api.HTTPService.navigate(HTTPService.java:473)+
    +     at oracle.oats.scripting.modules.http.api.HTTPService.navigate(HTTPService.java:1197)+
    +     at oracle.oats.scripting.modules.http.api.HTTPService.post(HTTPService.java:1704)+
    +     at script.run(script.java:45)+
    +     at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:225)+
    +     at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:595)+
    +     at java.lang.Thread.run(Thread.java:619)+
    +15:41:10,066 ERROR [1] Error in section Run+
    oracle.oats.scripting.modules.http.api.exceptions.ThinBrowserException: HTTP response code: 500  Internal Server Error
    +     at oracle.oats.scripting.modules.http.api.exceptions.ThinBrowserException.createErrorInvalidHttpResponseCode(ThinBrowserException.java:43)+
    +     at oracle.oats.scripting.modules.http.api.HTTPService.validate(HTTPService.java:574)+
    +     at oracle.oats.scripting.modules.http.api.HTTPService.navigate(HTTPService.java:473)+
    +     at oracle.oats.scripting.modules.http.api.HTTPService.navigate(HTTPService.java:1197)+
    +     at oracle.oats.scripting.modules.http.api.HTTPService.post(HTTPService.java:1704)+
    +     at script.run(script.java:45)+
    +     at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:225)+
    +     at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:595)+
    +     at java.lang.Thread.run(Thread.java:619)+
    +15:41:10,082 ERROR [1] HTTP response code: 500 Internal Server Error+
    2) And how to record the JS(Javascript files) in OpenScript.
    How i can solve this problem.Can any one help me in this issue.

    Ramesh
    The 500 error I guess is due to a miss correlation, sending wrong data to the server making it crash.
    You can record JavaScript files by editing the proxy filter:
    View -> OpenScript Preferences -> Record -> HTTP module (or Sieble) -> Change to URL Filters tab; you can add edit remove filters from there.
    Regards
    Alex

Maybe you are looking for

  • Reduced Performanc​e When No Battery

    I've noticed something on my T510 that's interesting and also a little disturbing. If I run the T510 off the power adapter, without the battery, the clock frequency never goes over 50% (according to the Win7 Resource Monitor) even though both process

  • Icloud no longer syncing Outlook calendar on my PC with iphone

    My Outlook calendar on my PC is no ,longer syncing with icloud or with my iphone. This happened since IOS6 update.

  • How do I setup the HP recovery partition on my HP Pavilion DV7-1232nr

    How do I setup the HP recovery partition on a drive that has been erased of it's HP tools recovery partition like in the recovery patition size needed on the harddrive and how it should be setup like in should it be set as Active,Logical,Primery,etc

  • Trying to subtract days from a date

    Im trying to subtract days from a date. When i use this query: select sysdate-:p21_DAYS_OLD from dual; it displays the correct date but not in the correct format. It is displaying 12-AUG-09 instead of 08/12/2009. I tried this query but i get the ORA-

  • ITunes artwork does not appear in fan view

    This is very irritating.  I am using the touchsmart music app on my brand new IQ522UK to control my iTunes library.  Everything is fine except there is no artwork shown in the fan view.  All the artwork appears in the normal album view. Any ides?