Error: CJS-20057 while Java-Add-In-Installation
Hi,
I get this error while Java-Add-In-Installation:
ERROR 2005-08-31 09:01:59
CJS-20057 Starting J2EE Engine D01 of SAP system XI3 failed: after 23 seconds the state of the engine changed from "Stopping" to "Stopped".
Who knows the solution?
Thanks.
Greets
Stefan
Hi Stefan,
This is one solution that i came across in an alternate thread,
"Not sure if this will help but..
All of my issues resolved around the Java engine (HEAP) not being able to reserve enough memory. Also, I found some of the default parameters in the config tool to be slightly incorrect.
So, I patched to the Java version C:\j2sdk1.4.2_08..I assume you have edited the profile parameter to include
jstartup/vm/home = <your jdsk> location
During the java install, failed at the IGS step (due to IGS running on the Abap stack), had to kill this process with
qprocess sapservice<SID> (look for the IGS processes)
sapntkill -INT pid pid pid (yes, I'm running Windows)
Then, the failure at the Java startup time. Numerous error messages like cj2-20057, or server0 would not start etc. I tried numerous attempts, eventually identifing that the Java parameters were not correct.
So...
Run the configtool.bat
For the instance_ID:-
Message Server and Bootstrap tab
256MB memory
no Java parameters set
Servers General Tab
Max heap size 256MB
-Xms128m
-XX:NewSize=32m
-XX:MaxNewSize=64m
-XX:NewRatio=3
-XX:+DisableExplicitGC
The DISPATCHER ID
General TAB
Ensure the max heap size is 64
-Xms64M
Bootstrap TAB
Max heap size 384
(no JAva parameters set)
the SERVER ID
General TAB
Max Heap Size 528
Java parameters as below....
-Xms528M
-XX:PermSize=192M
-XX:MaxPermSize=192M
-XX:NewSize=160M
-XX:MaxNewSize=160M
-XX:SoftRefLRUPolicyMSPerMB=1
-XX:SurvivorRatio=2
-XX:TargetSurvivorRatio=90
-verbose:gc
Bootstrap Tab
383MB
-no java parameters set
Shut down the Java stack in MMC, pressed the Retry button, and all was fine.
Hope this helps."
cheers
Sameer
Similar Messages
-
SAP Secure Store error at Java add-in installation
During the Java add-in installation, at phase "Install Java Engine", I get the error "A key/value pair with this key already exists in the store".
How can I fix it?
[ECC6]Sorry for not making clear.
To uninstall java stack:
1. Drop the J2EE DB schema (the db schema for this one SAP SID). Be very
careful not to drop the DB schema for another existing system or the
ABAP system since it will destroy your data.
2. Remove DIR_GLOBAL/security/data
3. Remove DIR_INSTANCE/SDM
4. Remove DIR_INSTANCE/j2ee
5. Revert CI instance profile to their original state (backup copies
should exist in the profile directory)
6. Deinstall SCS using SAPinst
7. Restart ABAP
This should remove the java stack without affecting the ABAP system.
Then the correct order for installation will be:
1. Install Central Services Instance (SCS) Java Add-In
2. Install Database Instance Java Add-In
3. Install Central Instance Java Add-In
cheers,
Vincent -
BI 7.0 Java Add-on installation hangs
Hi Guru's
While doing upgrade of BW 3.5 (Netweaver 2004) to BI 7.0 (Netweaver 2004s) during Java Add-on installation at "Database Instance Java Add-in" phase the installation hang on "Import Java dump" phase.
I have tried to kill and restart the installation 2-3 times and restarting the complete installation once again it stops at the same phase. Kindly let me know what can be the reason because we have not face this issue in DEV and QA environment. It is my production server.
The environment is HP-UX IA64 with oracle 10g.
Thanks in advance.Hi Rajesh,
What stage is the installation hanging at ?
Please provide any error info from sapinst_dev.log
Check if java engine is installed and is up and running or not.. You could check the j2ee work directory under which you find j2ee stack related traces.
e.g. check std_server0 to see if the server is up or not
Please send more details
Regards,
Snehal -
Can't start SAP after Java add-in installation
Hi,
We have migrated our BW 3.1C system to BI 7.0 (Win2003, Oracle 10.2, non-unicode). Everything was OK with the Abap system upgrade. Now we are making a BI Java installation over the BI 7.0 Abap system (Java add-in installation). We have made the first step, SCS instance installation and now the SAP BI 7.0 abap system doesn't startup.
The workprocess fail to connect to Oracle and don't startup:
M Fri Dec 07 22:47:00 2007
M calling db_connect ...
C dbs/ora/array_buf_size = 650000
C Prepending F:\usr\sap\BWK\SYS\exe\run to Path.
C Oracle Client Version: '10.2.0.1.0'
C *** ERROR => OCI-call 'OCIEnvCreate' failed: rc = -1
[dboci.c 2159]
C *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
[dboci.c 1986]
B ***LOG BY2=> sql error -1 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> Cannot get Oracle error text. [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error -1 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Cannot get Oracle error text. [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10169]
Any idea about how to solve the problem?
Thanks in advance!Hi,
ORA_NLS33 is not set as environment variable. We uninstalled the J2EE so now everything should be non-unicode and SAP should startup but we continue with the same error.
Some more info...
DW log info when everything was ok:
M calling db_connect ...
C dbs/ora/array_buf_size = 650000
C CLIENT_ORACLE_HOME is not set as environment variable or
C DIR_CLIENT_ORAHOME is not set as profile parameter.
C assuming using instant client with unspecified location.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPBWT's password
C Connecting as /@BWK on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 048D7FA8 0BD02454 0BD01CDC
C Attaching to DB Server BWK (con_hdl=0,svchp=0BD01C28,svrhp=0BD04A24)
C Starting user session (con_hdl=0,svchp=0BD01C28,srvhp=0BD04A24,usrhp=0BD25D68)
C
C Thu Dec 06 18:00:20 2007
C Now '/@BWK' is connected (con_hdl 0, nls_hdl 0).
Actual DW log with the errors:
M calling db_connect ...
C dbs/ora/array_buf_size = 650000
C CLIENT_ORACLE_HOME is not set as environment variable or
C DIR_CLIENT_ORAHOME is not set as profile parameter.
C assuming using instant client with unspecified location.
C Oracle Client Version: '10.2.0.1.0'
C *** ERROR => OCI-call 'OCIEnvCreate' failed: rc = -1
[dboci.c 2159]
C *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
[dboci.c 1986]
B ***LOG BY2=> sql error -1 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> Cannot get Oracle error text. [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error -1 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Cannot get Oracle error text. [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10169]
There is no "C Nls CharacterSet..." line, the problem must be something regarding NLS charactersets, non-unicode/unicode issues...
But we don't know how to solve the problem.
Any idea?
Thanks again,
Jon -
Can not install a Java add-in installation
Hello,
I have installed a ABAP NW 7.0 EHP1 system with BI_CONT 704. But our BW people asked if I could install a J2ee add-in installation onto the ABAP system.
I u201Cthe old daysu201D I just started sapinst on the installation master, and then choose Java Addin installation, but this option is not available any more.
I tried this on the installation master: SAP Netweaver 7.0 Including Enhancement Package 1 Support Release 1 -> SAP Application Server JAVA -> MS SQL Server -> Central System
But when sapinst gets to the step where it asks me for the SAP instance u201CSAP System IDu201D, then I enter the running ABAP system, but after that I get the error u201CSAP system BW3 is an ABAP or ABAP+Java system. Cannot convert this to a Java standalone system. u201D
This confuses me, since I am not trying to convert anything, I am just trying to install a J2ee addin installation.
Anyone who can help?
Thanks in advance.
Kenneth
Edited by: Kenneth Nielsen on Jan 27, 2010 8:33 AMHi,
Yes, as you discovered by yourself, the java add-in installation option was removed by SAP.
The java add-in was recommended a few years ago but due to all the problems it created it is now unsupported by recent installation sources.
From my personal experience, I agree that java add-in brings more problemas than advantages but if you really want to install one you will have to use older installation sources.
Regards,
Olivier -
Java add on installation in ECC 6
Hi all,
We are having ECC 6 already in place and our client requirement is to install java add on the same in ECC instance. In the installation master I have selected the Netweaver system , followed by sap system and then java add in for abap system.
This is the step which i am following for java add in installation. I am not sure whether i am in the right process. Could you please suggest the porcess?
Regards
VijayThanks Rohit,
For the immedite response.
In the phase of Java system RFC connection. I have provided the SAP SYSTEM LOG in details.
That is SAP client as : 300
DDIC password : password
The problem is not accepting by ddic passowrd and throwing an error by saying the password which you have provided is wrong. But i can able to log in sap level by using the same password in the same client.
Why is not accepting the password? Eventhough the password is right and also i can able to login in sap level.
I am sure about i didnt do silly mistakes like caps lock or mistyoing or key board issues. And also I have tried the standard passwords like 19920706,minisap and the master passwords.
After the third attempt in installation,m the user is get locked. I will unlock and will try again. Even I tried to change the password in sap level and its not working in the installation.
Anyone have any idea on this??
Kindly suggest
Thanks and Regards
Vijay kumar -
Java Add-In installation on a existing ABAP System (MSCS Cluster)
Hi all
we try to install a Java Add-In for a already existing ABAP System with
SAPinst. The ABAP System is a NetWeaver2004s SR1 System in a MSCS Cluster.
We have the Problem that we can´t choose the Installation Drive during
the SAPInst Define Parameter Step during the "Central Services Instance (SCS) Java Add-In" Installation.
But in the Installation Manual for
NW2004s Java AS in Chapter 4.3.2 is stated:
"Caution: You must install it on the same shared disk as the ASCS instance."
If I run the Installation, the SCS will be installed on the local disk E:
beside the Central Instance. But it need to be on the shared Disk P:
beside the ASCS installation. How can I control this?
Stefanobviously the network share saploc is existing in your system an pointing to a local device.
Delete the local saploc share, install SCS instance, run MSCS first node, additional node, create the local share saploc again (don't forget to set permissions on the share, the default permission did only allow Read vor Everyone) and proceed with installation.
There is a note in creation for this issue.
peter -
Java Add-In Installation for EHP4 ERP system
Hello!
we successfully upgraded our SAP ERP system to EHP4 for SAP.
Our system has only ABAP stack.
Question
1) Is it possible to install a Java Add-In instance for the existing EHP4 system?
2) If yes, can this be done on the same Windows server?
Thank you very much!Specific Requirements
Take the following specific requirements of the new installation process into consideration:
- The previous SAPInst installation service Java Add-In in SAP ERP 6.0/SAP NetWeaver
7.0 was able to add Java usage types such as EPC, or EP, to existing ABAP-only
systems. This was possible only, if you added AS Java at the same time. The option of a
Java Add-In installation is not any longer available as of the enhancement package 4 for
SAP ERP 6.0. Thus, it is not any longer possible, for example, to add EPC and EP
together with AS Java to an ABAP-only system.
[SAP Enhancement Package 4 for SAP ERP 6.0|https://websmp201.sap-ag.de/~sapidb/011000358700000772192007E]
There are many links on SDN discussing ERP EHP 4 dual stack:
[Re: EHP4 Dual stack;
[ECC 6.0 - EHP4 - Client Import;
Hope this helps.
Thanks,
Naveed -
CreateOsCol error: SCS Java Add-In installation to ABAP on ERP 6.0 SR3
Hi there,
I got an error while installing SCS Java Add-in to ABAP on ERP 6.0 SR3.
Do you have any ideas for this issue?
sapinst.log
INFO 2010-06-04 16:54:35.109
Execute step createOsCol of component
|NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_SCS_Instance|ind|ind|ind|ind|7|0|NW_Instance|ind|ind|ind|ind|0|0
WARNING[E] 2010-06-04 16:54:35.921
FSL-02015 Node X:\usr\sap\XX1\SCS01\exe\saposcol.exe does not exist.
ERROR 2010-06-04 16:54:36.0
FCO-00011 The step createOsCol with step key
|NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_SCS_Instance|ind|ind|ind|ind|7|0|NW_Instance|ind|ind|ind|ind|0|0|createOsCol
was executed with status ERROR .
ThanksHi Toru,
You can try adding "DIR_INSTANCE"=X:\..." to the start and instance profile. This is a known issue if the saploc share already exists from a previous installation (Multi-SID issue) and points to a wrong disk. You could have also deleted saploc as a workaround and create it after the installation has been successful.
I hope this helps.
All the best,
Cristiano -
Was 640 java add in installation error 1332 - no mapping...
i am currently installing
the was 640 java add in for the was 640 abap.
i am logged in as /Sap_LocalAdmin and the installation fails.
Please check the following error messages:
INFO 2005-03-16 16:36:26
Successfully added privileges 'SeServiceLogonRight SeNetworkLogonRight SeDenyInteractiveLogonRight SeDenyRemoteInteractiveLogonRight' to account 'JDCKARLSRUHESAPServiceJXI' on host '.'.
INFO 2005-03-16 16:36:28
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'JDCKARLSRUHEjxiadm' on host '.'.
ERROR 2005-03-16 16:36:28
FSL-00001 System call failed. Error 1332 (No mapping between account names and security IDs was done.
) in execution of system call 'LookupAccountName' with parameter (NULL, jdcbwSAP_LocalAdmin, ...), line (305) in file (synxcaccmg.cpp).
ERROR 2005-03-16 16:36:28
FSH-00008 A system error occurred when executing function LookupAccountName. ErrorNo=1332
i don´t know exactly what to do now? should i edit the xml file or what can be done?
or am i wrong with my assumption, that the system´s reference to the group isn´t valid?Hi,
i had the same problem too.
Actually i'm installing the "Sneak Preview SAP NetWeaver 2004 Slim Edition (Java)" on Windows 2003 DomainController. In this case the relevant settings are stored in "<Location_Of_SAPINST.EXE>\ADA\control.xml", which is being copied to "<SAPINST_INSTDIR>\j2ee_wp\installdefault\" during installation.
Before i started a new installation i searched the original "control.xml" for String "LocalAdmin".
I replaced:
'name:<u>host</u> + "
SAP_LocalAdmin"'
with
'name:<u>this.getDomain()</u> + "
SAP_LocalAdmin"'
and
'name:<u>host</u> + "
SAP_" + this.getSID() + "_LocalAdmin"'
with
'name:<u>this.getDomain()</u> + "
SAP_" + this.getSID() + "_LocalAdmin"'
The installation is still running at the moment, but far behind that point where the error always came up.
For me it looks very good.
SAP says installation on a DC is not supported, which not means that it would be impossible.
Remember to edit the "control.xml" at it's original location BEFORE you start the installation.
Good luck,
Philipp Kammerer -
Was Java Add in installation error FJS 0003
Hi all
does anyone have an idea about the following problem?
I am installing Java Add In on AS/400 platform. SAPINST termitaes with error:
FJS-0003 Output is not defined.
I cannot understand what's going on.
Hints are really appreciated.
P.S. Was ABAP 6.40 is already installed on host.
F.V.Hi,
i had the same problem too.
Actually i'm installing the "Sneak Preview SAP NetWeaver 2004 Slim Edition (Java)" on Windows 2003 DomainController. In this case the relevant settings are stored in "<Location_Of_SAPINST.EXE>\ADA\control.xml", which is being copied to "<SAPINST_INSTDIR>\j2ee_wp\installdefault\" during installation.
Before i started a new installation i searched the original "control.xml" for String "LocalAdmin".
I replaced:
'name:<u>host</u> + "
SAP_LocalAdmin"'
with
'name:<u>this.getDomain()</u> + "
SAP_LocalAdmin"'
and
'name:<u>host</u> + "
SAP_" + this.getSID() + "_LocalAdmin"'
with
'name:<u>this.getDomain()</u> + "
SAP_" + this.getSID() + "_LocalAdmin"'
The installation is still running at the moment, but far behind that point where the error always came up.
For me it looks very good.
SAP says installation on a DC is not supported, which not means that it would be impossible.
Remember to edit the "control.xml" at it's original location BEFORE you start the installation.
Good luck,
Philipp Kammerer -
Error in phase creating java users during installation!!
Hi,
We are getting error at step "Creating java Users" while installing NW 2004s SR1 non unicode dual stack on HP Ux Pa Risc 64 bit with database Oracle 10g.
Erro logs of file /tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/sapinst_dev.log are as:
==================================================================================================
ERROR 2011-07-21 13:20:37
CJSlibModule::writeError_impl()
CJS-30197 . For more details see output of logfile:
TRACE [iaxxejsbas.hpp:460]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2011-07-21 13:20:37 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0|createJSF was executed with status ERROR .
=================================================================================================
Also please note that we have already 1 instance (dual stack) on same host and that is running fine.
Could someone please assist us in proceeding further.
Regards
Joy GargHi,
Issue gets resolved by extracting manualy from JAVA_DVD_DIR/J2EE_OSINDEP/J2EEINSTALL.SAR to SAPINST install directory using SAPCAR. The path of this install directory is:/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/install as:
> pwd
/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/install
> SAPCAR -xvf /SW/NW_2004s_SR1Java_based_SW_Comp/J2EE_OSINDEP/J2EE-INST/J2EEINSTALL.SAR
Once we have extracted the J2EEINSTALL.SAR relaunch SAPINST again and the installation continue.
Regards
Joy garg
Once you will have extracted the J2EEINSTALL.SAR please launch SAPINST again and the installation will continue. -
Error Message with Installing Java Add in Component 640
We are trying to install a JAVA Add-in for ABAP using the Installation
Master CD 51031149. From SAPINST, SAP Netweaver '04 Support
release 1 > JAVA Add-in for ABAP > IBM DB2 UDB for iSeries >
Central System > JAVA Finalization, we are getting the error message
on the screen JAVA System - General Parameters: Cannot find the default
profile for the SAP system SDS (where we are trying to install the
addinat the default location "\ac4sap02.nmhg.com/sapmnt/SDS/profile/
DEFAULT.PFL. Make sure the installation step 'Preparation of Central
Instance Host' has run successfullyon the central instance host for the
SAP system SDSand that the profile directory is mounted at
'undefined/SDS/profile'.
From our install server @ '/usr/sap'SDS/SYS/profile' I have a
DEFAULT.PFL, DEFAULT.1.PFL, (2) SDS_DVEBMGS86_ac4sap files.
We are on an iSeries 570 4-way, installing SRM4.0, XI3.0 with SUS, CCM, TREX LAC and IPC.
Thanks
Chris Sugg
NACCO Inc.Hi Chris,
I am also getting the same error while installing the SAP Web AS 6.40 SR1 on IBM iSeries OS.
Error Message:"Cannot find the default profile for the SAP system <SID> at the default location /sapmnt/SDS/profile/
DEFAULT.PFL Make sure the installation step 'Preparation of Central
Instance Host' has run successfullyon the central instance host for the
SAP system SDSand that the profile directory is mounted at
'undefined/SDS/profile'."
I already apply Note: 789188
Can U Guide me the solution...
Regards -
Java ADD-IN installation problem
Hi All,
I have just upgraded BW 3.1c to NW04s SR1 release. I am now trying to install the Java component with usage type BI java, EP and AS java. The SCS and DB steps went in very smooth. When i got to CI install, i got a problem with deployment of SCA files. Basically, the install failed at the "install software units" step. The error I have in the sapinst_dev.log is -
Info: -
Deployment was successful -
Info: Summarizing the deployment results:
Error: Admitted: /software2/nw04supgSR1/java/J2EE_OSINDEP/UT/EPBC06_0.SCA
Processing error. Return code: 4
Error: Processing error. Return code: 4
WARNING 2006-09-29 14:02:44
CJSlibModule::writeWarning_impl()
SDM call of deploySdaList ends with returncode 4. See output of logfile /usr/sap/put/install/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/callSdmViaSapinst.log.
ERROR 2006-09-29 14:02:44
CJSlibModule::writeError_impl()
CJS-30156 SDM deployment failed for at least one of the components to deploy.<br> SOLUTION: Check '/usr/sap/put/install/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/callSdmViaSapinst.log' for more information.
ERROR 2006-09-29 14:02:44
FCO-00011 The step enableUsageTypes with step key |NW_Addin_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|11|0|enableUsageTypes was executed with status ERROR .
And, what i have in callSdmViaSapinst.log is -
Sep 29, 2006 2:02:43 PM Info: Initial deployment: Selected development componen
t 'com.sapportals.prt.portalruntime'/'sap.com'/'SAP AG'/'7.0006.20060301194711.0
000' will be deployed.
Sep 29, 2006 2:02:43 PM Info: Ending deployment prerequisites. All items are co
rrect.
Sep 29, 2006 2:02:43 PM Error: An error occured while storing the cluster insta
nces.
Sep 29, 2006 2:02:43 PM Error: There is no control instance running in the clus
ter:
Name:JM_T1159556563390_1_bowie
Host:bowie
State:5
HostAddress:138.126.81.41
Please check if there are running cluster instances.
Sep 29, 2006 2:02:43 PM Error: Received exception when saving current Engine st
ate: There is no control instance running in the cluster:
Name:JM_T1159556563390_1_bowie
Host:bowie
State:5
HostAddress:138.126.81.41
Sep 29, 2006 2:02:43 PM Error: Aborted: development component 'com.sap.pcd.dbsc
hema'/'sap.com'/'SAP AG'/'7.0006.20060301194711.0000':
Internal error in SDM: deployment was started although target system is not conf
igured properly. Db connect failed.
Sep 29, 2006 2:02:43 PM Error: An error occured while restoring the cluster ins
tances states
Sep 29, 2006 2:02:43 PM Error: There is no control instance running in the clus
ter:
Name:JM_T1159556563390_1_bowie
Host:bowie
State:5
HostAddress:138.126.81.41
Please check if there are running cluster instances.
Sep 29, 2006 2:02:43 PM Error: Received exception when restoring Engine state:
There is no control instance running in the cluster:
Name:JM_T1159556563390_1_bowie
Host:bowie
State:5
HostAddress:138.126.81.41
Please check if there are running cluster instances.
Sep 29, 2006 2:02:43 PM Info: -
Deployment was successful
Sep 29, 2006 2:02:43 PM Info: Summarizing the deployment results:
Sep 29, 2006 2:02:43 PM Error: Admitted: /software2/nw04supgSR1/java/J2EE_OSIND
EP/UT/EPBC06_0.SCA
Sep 29, 2006 2:02:43 PM Error: Processing error. Return code: 4
Please advise,
Mary BanhHi, I have solved this problem by delete the JAVA stack completely per the installation manual instruction like delete the unix directories and files and also delete the oracle schema SAPSR3DB and the new tablespace PSAPSR3DB and its datafiles. One thing that the manual did not mention and i did have to delete otherwise i kept having problem is java related directories under /sapmnt/SID/global/*. Once everything deleted, i was able to perform the installation again and it completed with out any issue.
-
NW04 Java add-in installation problem
Hi Friends,
I am installing Unicode WAS 640 ABAP + Java system for XI3.0 on Windows/Oracle. I have installed ABAP system successfully. After that I was installing Java add-in on ABAP system. At the step 24 of 27 : Start SAP J2EE Engine, I was getting error like this:
CJS - 20057: Starting J2EE Engine DVEBMGS00 of SAP System XI3 failed: after 21 seconds the state of the engine changed from "stopping" to "stopped
Any help would be greatly appreciated
Thanks,
KrishnaI encountered the same error when installing Java in HP-UX OS. In my case this was due to the support packs on ABAP stack. I installed ABAP and applied recent support packs as part of post-install steps and then started the Java Add-in.
I re-installed ABAP Central Instance, Database Finalization and created and performed client copy. Thereafter, started Java Add-In. This time, the Java install completed successfully without the CJS-20057 error.
I hope this approach helps you too!
Regards
Raghu Balasubramanian
Maybe you are looking for
-
How do I downgrade my software on the iPhone 4
I upgraded my iPhone 4 to 4.3.4 and want to downgrade it to 4.3.3, how do I accomplish this ?
-
This is especially annoying if you have hot corners for LaunchPad and accidentally open it with a full screen app open, because the Dock will not leave! Try it: open any app in full screen, open LaunchPad with a gesture or hot corner, exit out of La
-
MegaPC 180 - Programming LCD Panel
Hi All, I recently built my MegaPC180 and what a lovely machine she is too!. My old machine sounded like an aircraft taking off!, this is nice and quiet with lots of mod-cons in a SFF barebone. One thing I'd like to take advantage of is the LCD pane
-
COD2 and Alchemy - Don't have 5.1 sound and E
Hi, I've installed Creative Alchemy software and "Transmuted" the COD2. When i try to change sound settings on COD2 to EAX 3, it'schange again to?"Miles Fast 2D...". I can't get 5. sound without turn on the "X-Fi CMSS-3D". ?I've the 2 files (Alchemy)
-
Hi, I am trying to update a field in the customer master using e-catt. The field is not available for mass update in [MASS] so i have to use ecatt (if i cannot do this then i'll think of LSMW or BDC's). I created a script by recording XD02 and then c