ERROR: CL_RSDM_READ_MASTER_DATA- _SIDVAL_DIRECT
Hi,
I have deleted & reloaded 0material master (text & attr) ,also adjusted tables using
SE14 .
But now i can not see data in any cube wherer i have used this 0material .
When i run query i get thi error:
SID 205 for characteristic 0MATERIAL could not be converted CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2
Plz experts how to solve his problem ?
Thanks & regds,
Girish M
Hi Girish,
It seems that Cube has data when you deleted master data from SE14 . and now master data has been reloaded .
In that case system will not be able to execute queries and give dump as there will be mis match between sid generated for 0material .
Ideally delete data from the cube and reload / reconstruct it then it should work.
Hope that helps.
Regards
Mr Kapadia
Similar Messages
-
Error CL_RSDM_READ_MASTER_DATA
Hi,
When I am trying to execute the report the BEx analyser is giving the following error message before kicking out from BEx.
"System error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct_"
When I tried to analyse the error I am getting the following
"This internal error is a targeted termination since the program has an incorrect status.
Procedure
Analyse the situation and inform SAP.Notification Number BRAIN 299 "
Can any one of you faced the same kind of issue early? If so appriciate your help in resolving this issue.
Surya.It appears to be a problem with navigational objects. Check the masterdata InfoObjects that you use in your cube. One of them is probably corrupt.
Use transaction RSRV to check SID-tables for your cube and the related masterdata. -
RSBOLAP 000 and RS_EXCEPTION 105 ERROR in BW
Hello SAP Guru,
I am using BI 7.X(Based on 7.10)
Support Package 9, Patch 1
Revision 1507
When I am using the filter in Bex for DATE,DIVISION and DISTRIBUTION CHANNEL, I am getting the following error.
RSBOLAP 000 Program error in class SAPMSSY1 Method : Uncaught_Exceptiomn
RS_EXCEPTION 105 Error in BW.
Where as for others filter I am not getting any error.
Please any one let ´me know what is the reason
Thanks in advance.
With regards,
Anand KumarHi
Please implement the notes below in your system. These notes should help you.
1398358 Error:CL_RSDM_READ_MASTER_DATA and form __FILL_ATTR_INFO-06-
1452121 Error:CL_RSDM_READ_MASTER_DATA and form __FILL_ATTR_INFO-06-
Best Regards,
Rafael -
HI All,
The following error is thrown when I execute the query.
abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct_
However, earlier today, I ran this query successfully several times.This Query is on a multiprovider.
Appreciate your help in advance.
Regards,
HarikaDear Harika,
Try to repair at RSRV and check.
Check: Re: SID error for characteristic
Srini -
Hi Experts,
I have 'Original Curr./Unit' 1CUDIM as a free characteristic in my query. When I drilldown on this and then try to drilldown on any other free char, it gives the following error:
'System error in program CL_RSDM_READ_MASTER_DATA and form FILLTXT_N-03- '
Any assistance would be appreciated.
Thanks in advance,
AbhishekHi,
I have checked the service market but could not find any note related to my error. There is a note for a similar error, i.e., CL_RSDM_READ_MASTER_DATA and form FILLTXT_N-08-', whereas my error is CL_RSDM_READ_MASTER_DATA and form FILLTXT_N-03-'. The note asks to get the support pack 10 for BW3.5 but we already have that.
Any assistance is welcome.
Thanks,
Abhishek -
System error in program CL_RSDM_READ_MASTER_DATA and form
Hi Xpertz
I had a workbook created on a multiprovider. There was a navigation attribute removed from a infoobject for(which was not mapped in my multiprovider)
I am getting this error when i try to run the workbook.
"System error in program CL_RSDM_READ_MASTER_DATA and form
sidvaldirect_read2"
I tried running rsrv and found that there was a hierarchy field which is giving error.
It stated that no leaf properly maintained.
I tried correcting it but it didnt work.
But I went to my query and removed a field(not hierarchy but another characterstic in the query) and it works fine.
I am not restricitng anything key figure with this characterstics..
So how to go about this...........
Thanks in advance
Regards
R M KHi Ravi
I checked that the hierarchy and the characterstics both are different and heirarchy is not using the characterstic. Could you tell me what causes this error? If it is because of SID's then how to handle that. Awaiting your reply. -
Abort System error in program CL_RSDM_READ_MASTER_DATA
Hi Gurus,
I had a user who was trying to run a query and they got this error msg:
"Abort System error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct"
I went to RSRV and tried to repair Master Data objects, I came up with this error only on this one "Characteristic 0WBS_ELEMT : Missing initial entry in table /BI0/XWBS_ELEMT". Please guide as to what I should do for this message.
Thnx.Thanks Mangra,
I did not understand your statment " Check your master data whether the first blank entry is existing or not(?) if not create it (create what ?), transport the object"
Please explain little bit more with step by step.
Thanks -
Dear Gurus,
Recently, there was a user who was running something, we're not sure what he/she was running at the moment but it seemed to have generated a lot of the following messages in SM21.
MESSAGE BRAIN 299: CL_RSDM_READ_MASTER_DATA CLEARTABLES-01-
Any idea what this error is about???
Regards,
KeatRead,
SAP Note 1232644 - Termination CLEARTABLES-01 in CL_RSDM_READ_MASTER_DATA
Please do some research before posting
Regards
Juan -
Error while executting report.
Hi,
We are getting this error Abort System error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct_ while execution the report for the year 2010.
Retail Performance Day is restricted with 1 month period.And its throwing above mentioned error.
But if i remove restriction and create variables then report is generating properly please advice.
Thanks and Regards,
AsimBuenas estimado
Yo tuve el mismo problema, pero luego de agotar todas las posibilidades opte por lo mas sano, que era formatear e instalar denuevo. Luego de eso no tuve ningun problema con el XL report
Aqui te dejo el link del post que hice [Problema en XL Reporter;
Saludos FLR -
Error in Query (Pls help)
Hi friends,
When i executed one of the queries, i get this error:
Abort System error in program <b>CL_RSDM_READ_MASTER_DATA and form_sidval_direct</b>
Diagnosis
This internal error is a targeted termination since the program has an incorrect status.
Procedure
Analyse the situation and inform SAP.
I have check all my infoobjects and master data...everything is in active but still i dont understand why i get this....
please suggest how to get rid of this error? its urgent
Regards
BalajiHi balaji,
This can be program error, need to apply support package or correction,
seems no oss found for form_sidval_direct .....
perhaps it's sid error, try to analyze and repair the infoprovider where the query created on, use transaction RSRV.
hope this helps.
assign points if useful
Regards,
Archna -
Webi error for master data attributes if universe is on top of BI query
Hi All,
We are using BO XI R2 SP5 integrated with SAP BI 7.0.
We have built a universe on top of a BI query and when we try to build a web intelligence report that includes master data attributes like Customer City,Customer Region etc BO throws the following error:
Error 1:
Database error: [SOFA Driver] : Error getting members for hierarchy (level=ZFI_I03/ZFI_I03_Q0003, member=[ZFI_I03___F172], opcode=[ZFI_I03___F172]) . System error in program CL_RSDM_READ_MASTER_DATA and form VALUEREAD-02- (see long text). Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)
For a universe built on a different BI query with master data attributes mentioned above,a different error occuring.
Error 2:
Your Web Intelligence session has timed out. Log out and log in again to InfoView. (Error: WIJ 77778)
We have tried:
1) We have executed the function module BAPI_MDPROVIDER_GET_DIMENSIONS with necessary inputs query/cube and we got correct output, like members, optional properties, selected properties and restrictions.But, still our problem remains same.
2) Transaction u201CRSRTu201D and executed the query,transaction RSRV to check SID-tables and the related masterdata.
Above steps we performed in response to SAP tickets 541052 / 2009,541131 / 2009 based on logs generated,but still the error persists.
What is working:
If a universe is built on top af an infocube directly, then there is no problem with master data attributes in webi report.
Please let us know if you need more details to help us resolve this issue.Hi Naresh,
based on the MDX you can identify that those are navigational attributes and thats why the issue is not happening when talking to the cube directly because when you connect to the cube directly the navigational attributes are not available.
Take a look at note : 996197
not sure if it will solve the problem because there are other notes when you search for the error message but this was most of the times the one that resolved the issue.
the issue is in the BAPI functions
Ingo -
hi !
I am getting the following error while executing the query .
Abort system error In program Cl_RSDM_READ_MASTER_DATA and form_sidval_direct_
Please suggest .Do you have any replacment path variable defined in the query?
MASTER_DATA_READ is done either by end of the query execution (before the formating the result area) or while performing the value population for any formula / KF where replacement path is used.
- Danny -
Error message when run a query
I got an error message when I run one of the query on the portal:
Root Cause
The initial exception that caused the request to fail was:
Termination message sent
INFO
No connection to system BI_SAP_QUERY available
com.sap.ip.bi.shared.SharedText system_not_found
BI_SAP_QUERY
No connection to system BI_SAP_QUERY available
com.sap.ip.bi.shared.SharedText system_not_found
BI_SAP_QUERY
ABEND BRAIN (892): 1 SIDs from characteristic USITM are missing (CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2)
MSGV1: 1
MSGV2: USITM
MSGV3: CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2
What problem is this? How to fix it? Thanks in advance!Hi Zheng,
Import Support Package 04 for Release 3.50 (BW3.50 Patch 04 or SAPKW35004) into your BW system. The Support Package will be available when note 0693494 with the short text "SAPBWNews BW 3.50 Support Package 04", describing this Support Package in more detail, is released for customers.
Regards,
Anil -
Runtime error when executing F4 help on 0FISPER or 0FISCYEAR
Hi experts,
I got a problem on F4 help.
When executing F4 help on 0FISPER or 0FISCYEAR using tcode LISTCUBE,
abap dump occurs. The problem also exists when run query in BEx analyzer.
My BW version is NW2004s. And SAPKW70012 has been implemented.
Thanks very much for any advices.
<b>The error message when run in BEx analyzer:</b>
System error in program SAPLRRS2 and form EXTRA_FIELDS_SET-01- (see long
text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program
state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template,
or during interaction in the planning modeler, and if you can reproduce
this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for
the trace tool environment as well as SAP Note 899572.
<b>And the ABAP dump log:</b>
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RSR_PROPAGATE_X
Date and Time 2007.04.28 15:08:47
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_RSR_PROPAGATE_X' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_RS_BASE====================CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_PROPAGATE_X', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_SY_NO_HANDLER", which was raised in the program
"CL_RSMD_RS_BUILD_QUERY========CP",
specifically in line 1 of the (include) program
"CL_RSMD_RS_BUILD_QUERY========CM00Y".
The cause of the exception was:
An exception with the type CX_RS_SQL_ERROR_SILENT occurred, but was neither
handled locally, nor declared in a RAISING clause
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_RS_SQL_ERROR_SILENT", which was raised in the program
"CL_RSDRS_SQL_QUERY============CP",
specifically in line 288 of the (include) program
"CL_RSDRS_SQL_QUERY============CM00J".
The cause of the exception was:
No text available for this exception
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_SQL_EXCEPTION", which was raised in the program
"CL_SQL_STATEMENT==============CP",
specifically in line 32 of the (include) program
"CL_SQL_STATEMENT==============CM004".
The cause of the exception was:
Invalid object name 'T009C'.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RSR_PROPAGATE_X"
"CL_RS_BASE====================CP" or "CL_RS_BASE====================CM005"
"X_PROPAGATE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "sapdev2"
Network address...... "192.168.1.74"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "SAPDEV2"
Database type..... "MSSQL"
Database name..... "BW1"
Database user ID.. "bw1"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Sep 1 2006 00:19:17"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 75
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 16192
EM...... 14617568
Heap.... 0
Page.... 163840
MM Used. 4553264
MM Free. 663776
User and Transaction
Client.............. 100
User................ "HANDLCR"
Language key........ 1
Transaction......... "LISTCUBE "
Program............. "CL_RS_BASE====================CP"
Screen.............. "SAPMSHLP 0600"
Screen line......... 7
Information on where terminated
Termination occurred in the ABAP program "CL_RS_BASE====================CP" -
in "X_PROPAGATE".
The main program was "GP9QWV49ZUMYUSW6JLZIZ85P81N ".
In the source code you have the termination point in line 12
of the (Include) program "CL_RS_BASE====================CM005".
Source Code Extract
Line
SourceCde
1
METHOD X_PROPAGATE .
2
3
DATA: l_r_x TYPE REF TO cx_rs_no_check.
4
5
TRY.
6
l_r_x ?= i_r_root.
7
CATCH cx_root.
8
CLEAR l_r_x.
9
ENDTRY.
10
11
IF l_r_x IS INITIAL.
>>>>>
RAISE EXCEPTION TYPE cx_rsr_propagate_x
13
EXPORTING
14
previous = i_r_root.
15
ELSE.
16
RAISE EXCEPTION l_r_x.
17
ENDIF.
18
19
ENDMETHOD.I got reply from SAP. The problem can be solved by running program RSDG_XPRA_IOBJ_TO_NW05. Note 939484 describes this.
Note 939484 - Input help for tech characteristic and time characteristics
Summary
Symptom
You upgraded to SAP NetWeaver 2004s. An open SQL error occurs when you execute input help for a technical characteristic, a time characteristic or a unit.
The 'SAPSQL_INVALID_FIELDNAME' short dump in the 'CL_RSDM_READ_MASTER_DATA' class indicates that these characteristics have not been maintained. This error may also occur when you activate InfoProviders, for example.
The error MAY occur for the following InfoObjects:
0CALMONTH
0CALMONTH2
0CALQUART1
0CALQUARTER
0CALWEEK
0CALYEAR
0CURRENCY
0FISCPER
0FISCPER3
0FISCVARNT
0FISCYEAR
0LOGSYS
0SOURSYSTEM
0UNIT
0WEEKDAY1
0RATE_TYPE
0DATE
0LANGU
Other terms
Input help, F4, 0CALMONTH, 0CALMONTH2, 0CALQUART1, 0CALQUARTER, 0CALWEEK, 0CALYEAR, 0CURRENCY, 0FISCPER, 0FISCPER3, 0FISCVARNT, 0FISCYEAR, 0LOGSYS, 0SOURSYSTEM, 0UNIT, 0WEEKDAY1, 0RATE_TYPE, 0DATE, 0LANGU, RSDG_XPRA_IOBJ_TO_NW05
Reason and Prerequisites
The problem can have the following causes:
The characteristic does not have any master data, although you did define a master data read class.
There is no generated master data table for the characteristic (for example, 0CURRENCY) and you have not defined a corresponding master data read class in the meta data.
Solution
Technical characteristics and time characteristics were delivered again for SAP NetWeaver 2004s with new properties. The first time you call the data warehousing workbench, the system activates the technical content. If the (time) characteristic already exists in the active version, the system does not copy it from the technical content again. For SAP NetWeaver 2004s, however, the following conditions must be fulfilled:
The characteristic has the property "With master data", which ensures that the master data read class functions correctly.
If the active version of the characteristic does not have any master data, copy the characteristic from the content again. Make any necessary adjustments. Ensure that the "With master data" property is set.
The characteristic does not have a generated table, rather it has its own table, delivered by SAP (for example, unit 0CURRENCY -> table TCURC). The definition of the characteristic must include a relevant master data read class (for example, unit 0CURRENCY -> class CL_RSMD_RS_0CURRENCY).
The RSDG_XPRA_IOBJ_TO_NW05 XPRA defines a master data read class automatically. This XPRA is executed when you upgrade. It may, however, occur, that the XPRA is not executed successfully. If this happens, you can execute the XPRA again manually.
Start Transaction SE38.
Enter the name RSDG_XPRA_IOBJ_TO_NW05 in the 'Program' field.
Choose 'Execute' to execute the program. -
TSV_TNEW_PAGE_ALLOC_FAILED Error
Dear Experts,
I have received multiple short dump Like "TSV_TNEW_PAGE_ALLOC_FAILED" in weekly twice
Server : Sun solaris/Oracle 10g- 64 Bit, 32GB Ram, SAP NetWeaver 2004s
one CI+DB and 3 APP servers.
When I checked Work process level it says
A Tue Aug 10 19:35:56 2010
A WP has reached abap/heaplimit = 40894464 bytes
A
A Tue Aug 10 19:41:14 2010
A *** ERROR => User XXXXXXX reached avail. heapsize = 2045 MB: see ST22 [abstor.c 1779]
A *** ERROR => Increase abap/heap_area_total [abstor.c 1780]
A *** ERROR => heap memory WP0: 1936 MB [abstor.c 1784]
A *** ERROR => heap memory WP1: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP2: 109 MB [abstor.c 1784]
A *** ERROR => heap memory WP3: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP4: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP5: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP6: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP7: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP8: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP9: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP10: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP11: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP12: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP13: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP14: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP15: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP16: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP17: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP18: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP19: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP20: 0 MB [abstor.c 1784]
My Instance profile value is like
abap/heap_area_dia 2145386496
abap/heap_area_nondia 2145386496
abap/heap_area_total 2145386496
abap/heaplimit 40894464
em/initial_size_MB 4092
Please let me know how to fix this issue, we are getting the same kind of dump for the last one year.. I have 32 GB, Can I increase the value to double the size of the above values. Already red the 425207 regarding this.
If i double the size of my above value, will my handle the load.. ?
Thanks
MalaiDear Ananda,
yes, O I think so..
I am not sure what the user exactly doing, this the log from St22.
St22 -> error-> No more storage space available for extending an internal table.
It terminated at Line 78
Information on where terminated
Termination occurred in the ABAP program "CL_RSBOLAP_QV_RESULT_SET======CP" -
in "EXECUTE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 78
of the (Include) program "CL_RSBOLAP_QV_RESULT_SET======CM002".
Here I attached my code in line no 78
IF o_r_query_view->n_s_rs_state_change-all = rs_c_true
OR o_r_query_view->n_s_rs_state_change-text_rows = rs_c_true
OR i_t_char_details IS NOT INITIAL.
CALL METHOD get_texts
CHANGING
c_sx_axis = n_sx_rows.
ENDIF.
IF o_r_query_view->n_s_rs_state_change-all = rs_c_true.
1* Use the texts from the text class
p_th_text = cl_rsdm_read_master_data=>n_th_txt_n.
GET REFERENCE OF p_th_text INTO n_r_text.
ELSEIF o_r_query_view->n_s_rs_state_change-text_rows = rs_c_true
OR o_r_query_view->n_s_rs_state_change-text_columns = rs_c_true
OR i_t_char_details IS NOT INITIAL.
2* Transfer the single texts (because the texts from the other axis might be missing otherwise)
LOOP AT cl_rsdm_read_master_data=>n_th_txt_n INTO l_s_txt_n.
INSERT l_s_txt_n INTO TABLE p_th_text.
IF sy-subrc <> 0.
MODIFY TABLE p_th_text FROM l_s_txt_n.
ENDIF.
ENDLOOP.
GET REFERENCE OF p_th_text INTO n_r_text.
ENDIF.
3* Rollup date and time
o_r_query_view->n_r_olap->get_topicality_time( IMPORTING e_timestmp_min = l_min_time
e_timestmp_max = l_max_time ).
When I double click line 77 I found that above on my system.
I am not sure This could be a Routine in internal tables or not..
Please advice.
Thanks
Malai
Maybe you are looking for
-
In PSE8 I need to move some files into one file - how to do?
When I added some photos of a trip from my camera to my PSE8 Organizer instead of going in as one file by date loaded they went in under separate files names. Now I have a large amount of files and want to move them into one file. How do I make a new
-
Mac Mini i5, 2011, Bootcamp Install of Windows 7 Fails (again)
I've looked through the forums and I've seen many people with similar issues. I partition, and attempt to install windows, and get the 'no bootable disk' error. Here's what I've tried: I've tried installing using a usb DVD Drive, and I've seen that
-
Is registration for MS Office 2011 transferable?
Greetins Mac Users, I have recently found out that my Harddisk S.M.A.R.T. status is failing. I recently visited the Mac repair here in my country. We don't have an Apple store but we do have PowerMac Center, an authorize reseller and repair center.
-
Disk Performance of DS-Series VMs (Premium Storage)
We're running performance tests on two new Standard DS13 (8 Core, 56 GB) VMs (both using the latest/default Windows 2012 R2 image) backed by Premium Storage and have hit a wall with step 1 in testing the local SSD performance. We understand 25% of th
-
Just received a new Imac running OS10.8 Mountain Lion. I have MS Office 2004 that ran ok on OS 10.6 Snow Leopard. I'm told that this software will not work on the new OS. Are there any work arounds?