(Error code: 0x5) Need Password

I keep getting this message when I try to access a file on a network: A password is required to synchronize this notebook. Where can I enter a password?

Hi,
Please contact the owner of this item to make sure he/she has give you the proper permission to access the document. If he/she is sharing the document with a live ID, we can find the permission setting as below:
Max Meng
TechNet Community Support

Similar Messages

Trying to inistall itunes keep getting error code 2330 need help unistalling and reinstalling

Im trying to install itunes but keep getting an error message. (The installer has encountered an unexpected error installing this package, this may indicate a problem with this package. Error code 2330
I need some resolution please assist. I did call microsft but they want to charge just to get help. I need assistance please.
Thank you

Although it's a better bet with a 2330 than a 2349, I'd try running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I have error code -36.need help!

I bought a new macbook air yesterday.along with it i purchased seagate expansion drive 1tb.
i copied stuff from my windows laptop to the external HDD.
when i connected it to my mac it asked that i can use this as backup drive .
so i copied all the files to my desktop on mac.
the external HDD got formatted and i formatted the other partition to exFat
i want to copy the files on my desktop back to hard disk but i have error code 36 and my external HDD gets disconnected and won't mount back.
FIXES tried
used the "dot_clean" on all the folders.
repared disk permissions
verified disk all of them(macbook and external)
checked the external HDD by copying huge folders from my iMac(sure that external HDD is fine)
ran diagnostics during boot(says everything is OK)
formatted the entire External HDD to ms-dos,exfat,macos journaled .(still same error)
tried copying single huge file (some movie.mp4) still get the error.

Hey thanks a lot, it worked like a charm!

Error code 120 - need a clue

Hello there,
I keep getting this message when exporting:
QuickTime Error: -120
I can find no reference guide eon what this error even is. Can someone point me in the right direction please?
Cheers,
Ken

A couple of suggestions:
Try to reset Background Processing:
Compressor main menu>Compressor>Reset Background Processing.
Also make sure your file's name is not too long.
If neaither of these suggestions work tell us more about the source material you are trying to compress, extention, file name, everything

Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?

Like the topic - "Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?"
I installed this OS, and it looks nice, but it's terrible to use. I randomly have the volume controls get disabled, and sometimes the volume menu in the system tray does nothing when adjusted which I've never seen in an OS before. The trash won't empty. When I try to drag and drop newer files over existing ones, nothing happens. The old ones just stay there. I have to delete the old ones and then move the new ones. And when I go into the protected files to manage audio plugins (I make music), the first thing I hit are error codes galore, and password prompts that either don't popup when they should, or don't execute the command after I provide my password.
What can I do now that I installed the flames of **** onto my computer?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

I am trying to copy iphoto library Error Code 36

I am trying to copy iphoto library from one hard drive to another and get the message The Finder can’t complete the operation because some data in “iPhoto Library” can’t be read or written. (Error code -36) = Need to back iy up or my wife will kill me. thanks for help

Here is something you can try:
Obtain iPhoto Library Manager. It is an inexpensive program you can download. Run it and tell it to REBUILD your iPhoto Library from your original iPhoto Library. It will create a NEW file in a destination that you specify (you can specify the other hard drive and thus get a backup all at once) and try to recreate the iPhoto Library based on the info from your original one. Depending on the problem causing your -36 file error, iPhoto Library Manager may (a) successfully recreate your entire photo library successfully on the other hard drive; (b) recreate all of your original photo library except for the part that is damaged; or (c) won't be able to finish at all if the disk problems are severe enough.
If (c) happens, you may have to copy the actual photos individually out of the iPhoto Library and into a new iPhoto Library. The actual photos are inside the iPhoto Library. You can find them by control-click once on the iPhoto Library and select Show Package Contents. The folder called Originals or Masters has the photos (originals) and a folder called Modified or Previews has the edited photos. I suggest COPYING (not moving) these folders to the external drive. You will then need to re-import the actual photos inside these folders to a new iPhoto Library.

DST Check Failed With Error Code: 0TW460-6HN79Q-MFPX1A-60RD03 Pdt Name: HP Pavilion g6

My laptop's screen is flickering so I ran the HP Diagnostics. The laptop failed the DST check with an error code. Need to know what this product code means.
Details:
Pdt Name: HP Pavilion g6
OS: Win 8.1
Error Code for DST Check Fail: 0TW460-6HN79Q-MFPX1A-60RD03
Thanks,
Ravi

DST fail= the hard drive is dead or dying and will need to be replaced. If you are still in warranty HP will send a replacement. If not a retail laptop SATA hard drive can be used. Just be sure to get one of at least equal capacity as the original in order to use Recovery Discs. It can be larger, but not smaller capacity.For instance if you have a 500GB hdd you could use a 750GB hdd but not a 320GB hdd.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

I receive the following error message:Error code: ssl_error_rx_unexpected_client_hello)

Error code: ssl_error_rx_unexpected_client_hello)
== URL of affected sites ==
http://gmail.com

I cannot access gmail. I get the following error message:
(Error code: ssl_error_rx_unexpected_client_hello
Need assistance, please.

Tecra M2 : Error code 10 on NVIDIA GeForce FX Go5200 32M/64M

When i'm browsing on the internet my screen just suddenly cracks like a t.v with no cable signal but i can still see the mouse... when i restarted the notebook, from startup the cracks on the screen and lines etc. are still there -_- i cannot install my display driver, it's always ERROR CODE(10) - need help pls...

Sounds like a hardware issue. Especially if you see the problem *before* Windows boots.
It could be the LCD, but if you cannot install the correct Display Driver from Toshiba, that usually indicates a problem with the Graphics chip (on the mainboard)

Need password error code 03305

Need pass code for mw hp dv2000 error code 03305
This question was solved.
View Solution.

Hi,
No, one OR the other, not all of them
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hp mini 110-1140 Fatal Error... System Halted. CNU94542R9 Need password to log on!

HP MINI FATAL ERROR SYSTEM HALTED .CNU94542R9 . Need password to log on!
Please Anybody SOLVE THAT PROBLEM. I HAV NOT OPEN MY PC SINCE one year, plz help me if you can?.
This question was solved.
View Solution.

Hi,
Good to hear it's Ok
You can remove the need for a power on password as follows - use the code from my previous post where necessary.
Shut down the notebook. Tap away at the esc key as soon as you press the power button to access the Start-up menu and then select f10 to enter the Bios menu. Use the arrow keys to highlight the Security tab and hit enter. Use the arrow keys again to highlight power on password and hit enter. Enter the current password ( use the code in my previous post ) and then for the new password, just leave this blank and hit enter - do the same for the confirmation field. Press f10, select to save the new settings and hit enter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

When trying to reset airport express password, I've got an error code -16.

A friend of mine gives me an AirPort Express which I intend to use at home to connect it to an audio device in my living-room. I’ve already have a wireless network based on a Linksys router, so the idea is to extend my actual network.
As the Airport was used, it has already a password, which my friend does not remember.
After reading the user manual, I’ve achieve to get into the configuration window, after I’ve made all the modifications (including the device password), but when saving I’ve get an error code -16.
Any help or advice?
PS: BTW, sorry for my English, it still needs improvement ;-)

First you cannot extend your linksys network with the apple expess. at least not in the typical definition of extending a network. you should first do a factory reset of the express to wipe out all prior settings.
you do this by unplugging the unit and holding down the reset button while you plug it back in. wait 10 to 15 seconds before releasing the reset button.
you'll then want to configure the airport express

Need bios reset for hp dv 40000 I hit 3 time error code is09924

I need to reset Bios password for hp dv4000 I hit it 3 time error code 09924

Hi,
Try entering:     pjfgn
                                  or
                               wpkkxh
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience. Error Code: c0000005 Address: 76f73ac3 I clicked on the OK button and the downloader closed. I then tried to download from the organizer. I

Photoshop Elements 12
Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.
Error Code: c0000005
Address: 75e32f71
I clicked on the OK button and the downloader closed.
I did a search on this error code (c0000005) and there seems to be a workaround but no solutions, why is this? I ask that because this problem seems to be years and years old, going back to at least 2005 (do the math that is 10 years).
I don't even have the Camera hooked up and I get this error on download. I redownloaded everything and reinstalled. I allso saw the AVI issues reported with this proble so i updated Quicktime though without the camera being hooked up when I get this error I didn't expect that to work. I tried support and they wouldn't help because I bought it in March this year. Pretty frustrating as I have re-purchased Elements about every 2 years. I think I might need a new CODEC? I had this problem on an Earlier version And I seem to remember that being the Fix but this may be something completely different

I finally found that it was missing a picture so the Catalog was "corrupted". I just deleted the picture and it started working.
I hate Adobe and their total lack of support - thanks for nothing Adobe . Also get this - they offered me to upgrade to 13.0 ( My 12.0 is only 6 months old but they still don't support it on errors. Only install errors!
I have upgrade and repurchase this product 4 times now. I will find something else next time!

Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help

I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?

Sorry to bother you.
I could find the answer after searching previous posts about this language problem.
Had to change my language in AAM profile and then download PS CS6 again ( english version ).
Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
restart application and Voila.
Greetz, Jeroen

(Error code: 0x5) Need Password

Similar Messages

Maybe you are looking for