Error code 0x645(1605) when using application supersedence

I've created a new version of an application that supersedes the previous version. I'd like the new version to uninstall the previous version, as otherwise it will install alongside it. Each version has a different MSI product code.
I created the application for the new version along with the supersedence rule, setting it to uninstall the previous version. I then set up a test VM with the old application and tried to install the new one via the Application Catalog. However, when the
Software Center begins the installation and tries to remove the old version, it fails with: "The software change returned error code 0x645(1605)"
I verified that the uninstall string for the old version is correct: I can even manually run it on the VM and it begins to uninstall the old version. I thought that 1605 indicated that the product that's trying to be removed is not present, but since the
uninstall string works I'm not certain what exactly is going on.
Any help that can be offered would be most appreciated. Thank you!

Thanks for responding so quickly! I ran it manually and the new version of the program installs ok. I used the same command line that I specified in the MSI deployment type (and there's only the one deployment type). So it seems that the error occurs when
SCCM implements the supersedence rule and tries to uninstall the old version.
I checked Event Viewer and I see two entries for when the program is attempting to uninstall, but they are simply the entries that say "beginning a windows installer transaction" and "ending a windows installer transaction." There's no error in Event Viewer.
The entries feature the MSI product code of the product; if I copy that product code and run msiexec /x with it, it uninstalls.

Similar Messages

Error code 5075 appearing when using Andor SDK to configure an EMCCD

Error code 5075 appears. The error code is undefined and doesn't appear when the examples are run, however does appear in any new programs that are produced using the vis provided by Andor. Any suggestions or help would be fantastice.

oj2 wrote:
Error code 5075 appears. The error code is undefined and doesn't appear when the examples are run, however does appear in any new programs that are produced using the vis provided by Andor. Any suggestions or help would be fantastice.
Isn't it a matter of comparing their examples to your VIs?

Error code 1074396120 appers when using IMAQ WriteFile.vi

When this VI is run, the error message 1074396120, "not an image", appears.
If the VI is run with highlight button ON, the error message doesn't appear and the images are properly saved.
I want to correct this VI.
Attachments:
110421grab_and_save.vi ‏62 KB

Hi Shigeru187,
I think there is a good chance that the error is occurring because the IMAQ WriteFile.vi is not able to access the IMAQ memory that it is trying to access. IMAQ WriteFile takes a bit of processing time and there is a possibility that the memory it is referencing is overwritten/deleted during access. Since it works fine in highlight execution, I recommend placing wait functions where it maybe necessary in order to examine the timing of this behaviour.
Also, for future reference, we have a Japanese forum available where Japanese customers and NI Japan posts messages in Japanese so please feel free to use the site below if required.
NI製品ディスカッション
http://forums.ni.com/t5/NI%E8%A3%BD%E5%93%81%E3%83%87%E3%82%A3%E3%82%B9%E3%82%AB%E3%83%83%E3%82%B7%E...
Kind Regards
Taiki Hoshi
Applications Engineer
NI Japan

I am getting and error code 150:30 when I try to use my CS4 AI, PS and AE. I tried uninstall and install again but same code

I am getting and error code 150:30 when I try to use my CS4 AI, PS and AE. I tried uninstall and install again but same code

ok Can I tell when it is stopped or if it didn't work. It is still saying the same thing. I can't see a progress bar or anything. Do you have any idea how long it usually takes. Just curious so I know i din't make another mistake

Error Code 0x80070035 shows when I try to Access Windows XP machine from Windows8/Windows7

Error Code 0x80070035 shows when I try to Access Windows XP machine from Windows8/Windows7. in my PC i m installed windows8 and used primary and secondary IP. Primary is used for Access my Domain/Internet and secondary IP is used for access my VPN and
there is no internet on VPN. VPN is only used for my Head Office Appication. After i give secondary IP to my windos8/windos7 PC the Active network status changed to private network and not able to acces windows XP machines. Please Advice...

Hi,
This error means that the Network path was not found. Was Windows XP locating in the same network as the secondary IP on Windows 8/7?
Please try the solution below. Use the IP address of the target computer, not the computer name.
1) Find out what the target computer's IP address is. It is desirable to give the target computer a static private IP address, for example, 192.168.1.10, so it does not change. Use the local windows help when sitting in front of the target computer
to do this if you don't know how.
2) When sitting in front of the Windows 7 computer you want to access the target computer from, open Windows Explorer and in the address bar type \\ followed by the target computer's static address, for example,\\192.168.1.10 and hit enter.
If the target computer uses username/password sharing, after a few seconds you will be prompted for credentials. Enter the same username and password employed to log on to the target computer when you are sitting in front of it.
The target computer will be added to the Windows 7 computer's Network list, appearing as an IP address instead of a computer name. Then you can access its shares just as if it were listed by name instead of by number.
Kate Li
TechNet Community Support

HT201210 My Ipod has an error code of 1604 when trying to restore. I have followed all recommended instructions...any ideas.??

My Ipod has an error code of 1604 when trying to restore. I have followed all recommended instructions...any ideas.??

If you did all of this
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

JCOP Tools Problem Error code: 6985 (Conditions of use not satisfied)

I have a problem with the JCOP tools. I am developing a very simple applet which does nothing at all. It is a "hello world" type applet so that I can get something working. It compiles ok, however as soon as I try to run it under the emulator I get an error.
Status: Conditions of use not satisfied jcshell: Error code: 6985 (Conditions of use not satisfied) jcshell: Wrong response APDU: 6985
This always happens when the jcshell issues the install command.
The install command is:
install -i 1234567890 -t -l -d -m -p -s -b -e -q C9#(1234567890) 1234567890 1234567890
I must be doing something very basic incorrectly. I have tried searching the forums and internet and I haven't found anything. Any help would be appreciated.
The code is this:
package pt.microfil.test;
import javacard.framework.*;
import javacard.framework.ISO7816;
import javacard.framework.ISOException;
import javacard.framework.APDU;
public class testcard extends Applet {
     final static byte CLASS = (byte) 0x80; // Class of the APDU commands
     final static byte INS_READ = (byte) 0x02; // instruction for the READ APDU command
     // this is the text string which will send back from the ICC to the IFD
     final static byte[] text = {(byte) 'e', (byte) 't', (byte) 's', (byte) ' ',
     (byte) 'g', (byte) 'e', (byte) 'h', (byte) 't', (byte) 's', (byte) ' ',
     (byte) 'd', (byte) 'e', (byte) 's', (byte) ' ',
     (byte) 'G', (byte) 'l', (byte) 'u', (byte) 'm', (byte) 'p'};
     public static void install(byte[] bArray, short bOffset, byte bLength) {
          // GP-compliant JavaCard applet registration
          //new testcard().register(bArray, (short) (bOffset + 1), bArray[bOffset]);
          new testcard().register();
     public static void install() {
          new testcard().register();
     public void process(APDU apdu) {
          byte[] cmd_apdu = apdu.getBuffer(); // the cmd_apdu variable is used because of performance reasons
          if (cmd_apdu[ISO7816.OFFSET_CLA] == CLASS) { // it is the rigth class
          switch(cmd_apdu[ISO7816.OFFSET_INS]) {      // check the instruction byte
          case INS_READ: // it is a READ instruction
          // check if P1=P2=0
          if ((cmd_apdu[ISO7816.OFFSET_P1] != 0) || (cmd_apdu[ISO7816.OFFSET_P2] != 0)) {
          ISOException.throwIt(ISO7816.SW_WRONG_P1P2);
          } // if
          // check if P3=length of the text field
          short le = (short)(cmd_apdu[ISO7816.OFFSET_LC] & 0x00FF); // calculate Le (expected length)
          short len_text = (short)text.length; // the len_text variable is used because of performance reasons
          if (le != len_text) {
          ISOException.throwIt((short)(ISO7816.SW_CORRECT_LENGTH_00 + len_text)); // give the expected length back to the IFD
          } // if
          apdu.setOutgoing(); // set transmission to outgoing data
          apdu.setOutgoingLength((short)len_text); // set the number of bytes to send to the IFD
          apdu.sendBytesLong(text, (short)0, (short)len_text);
          break;
          default : // the instruction in the command apdu is not supported
          ISOException.throwIt(ISO7816.SW_INS_NOT_SUPPORTED);
          } // switch
          } // if
          else {         // the class in the command apdu is not supported
          ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
}

i also found this error and i change the package name and applet id.it is not changing.now i got same error.
cm> install -i 6d796170702e617070 -q C9#() 6d797061636b616765 6d796170702e617070
jcshell: Error code: 6985 (Conditions of use not satisfied)
jcshell: Wrong response APDU: 6985
Unexpected error; aborting execution
how can i solve the problem??

I am getting an error code of "0" when trying to buy an in app purchase. what is this error?

i am getting an error code of "0" when trying to buy an in app purchase. what is this error?

In your first post you wrote
It is telling me I need 6MB of additional free space
And in your second post
Importing to internal hard drive 6.85GB available
Even assuming that the GB was a typo and should be MB you're still on the hairy edge.

I get error code 150:30 when downloading

I get error code 150:30 when downloading

That's an activcation error and has nothing to do with "downloading" but rather "installing". As kglad said, without info on what you are referring to as well as system information this is not going anywhere...
Mylenium

What does error code 50 mean when installing the creative cloud app?

what does error code 50 mean when installing the creative cloud app?

Hello,
This thread may help
Error code 50
Let us know!
Regards,
Jo-Marie

How do I resolve "Error processing your request", when using Download link in My Orders (photoshop 5

How do I resolve "error processing your request" when using the download link in My Orders for photoshop 5

As Jeff already hinted at, try a different browser. Such issues almost always are local problems on your end. Something is either changing or blocking the HTTP headers used for forwarding (could be your router, a desktop firewall or other security tools) or a JavaScript is not running/ being blocked.
Mylenium

N8 : ractivate help when using applications

N8 can show help (clue) when using application. I have de-activated by mistake but i can't find how to reactivate it. Do you know how ?
Thank you.

Menu-->applications-->User Guide..
or
If you are already in the application... Options-->User Guide.
If this is what you wanted..
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Getting Error Code 150:30 when opening Photoshop, how to fix?

Getting Error Code 150:30 when opening Photoshop CS4, how to fix?

Please refer:
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac- os.html
Regards,
Ashutosh

Why do I keep getting the error code 148:3 when I try to start Fireworks CS4?

Why do I keep getting the error code 148:3 when I try to start Fireworks CS4?

I just reinstalled Fireworks CS4 and it seems to be back to normal. Thanks

I have cs4. Had to rebuild my mac OS after malware infected it. Now getting an error code 150:30 when trying to open PS. Can this be fixed or do I have to upgrade to cs6?

I have cs4. Had to rebuild my mac OS after malware infected it. Now getting an error code 150:30 when trying to open PS. Can this be fixed or do I have to upgrade to cs6?

150:30 means licensing is broken. It's a common CS4 error. On Macs it usually happens when Photoshop is retrieved from backup or migrated from another Mac. Photoshop is never meant to be moved that way. As advised, you should uninstall and reinstall from your discs.
Sine reinstall only apply the base install and the CS4 Help > Update function is outdated, you will have to manually download and install your updates from here: Product updates for Bridge and Photoshop.
Gene

Error code 0x645(1605) when using application supersedence

Similar Messages

Maybe you are looking for