Error code 0x80040154 in Outlook 2010

0x80040154 error code come up when trying to download email...wont download any.
Looked all over the net and it seems to be an issue for several generations of Outlook. I uninstalled the whole suite and reinstalled...but apparently it leave some files as it had our email back in it when we restarted it.
Any more newer info on this.Thanks

Hi,
AFAIK, Error '0x80040154' generally occurs because of unregistered file(s) or some registry corruption issues.
Here are some common solutions that can help you isolate the given problem:
1.First, you need to click 'Start' and then 'Run'.
2.Next, type 'regsvr32 inetcomm.dll' and restart your computer.
3.Then you can start Outlook and see if the problem goes away. In that case, you can stop here as the problem was due to an unregistered inetcomm.dll file.
4.If the problem persists, you should restart your computer in 'Safe Mode with Networking' and then start MS Outlook. In case, this method works for you, the problem is related to a conflicting program or a virus. So, you need to uninstall the problematic program
and/or run an antivirus software.
5.If the above method also fails, you should remove the Outlook profile you use, after backing up all the e-mail folders and settings. You can either delete the profile or add a new one. Next, you can setup a new account and later import old folders.
6.In case, the issue still persists, you should try repairing Microsoft Office or Microsoft Outlook. If this doesn't work, you can reinstall MS Outlook. Make sure that you backup your PST and settings first.
However, if MS Outlook is damaged as a result of corrupted PST, the above methods will not work. This is because when you reinstall or repair Outlook, the old PST file(s) are not deleted. Thus, you need to repair them using PST Repair solutions.
Hope it does help.

Similar Messages

SSIS Package - An OLE DB error has occurred. Error code: 0x80040154.

I am getting below error when i try to execute a package
using batch file
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 64-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 7:15:29 AM
Progress: 2014-10-01 07:15:36.05
Source: Data Flow Task
Validating: 0% complete
End Progress
Error: 2014-10-01 07:15:36.05
Code: 0xC0202009
Source: ADTM001_UPDATE_COSTS_TIU0560 Connection manager "Excel
Connection Manager"
Description: An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB
Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2014-10-01 07:15:36.05
Code: 0xC020801C
Source: Data Flow Task Read Data From XLS [1]
Description: The AcquireConnection method call to the connection
manager "Excel Connection Manager" failed with error code 0xC0202009.
End Error
Error: 2014-10-01 07:15:36.05
Code: 0xC0047017
Source: Data Flow Task DTS.Pipeline
Description: component "Read Data From XLS" (1) failed
validation and returned error code 0xC020801C.
I have tried to use 32 bit exe as well , But then i get below
error ,
Could not load package because of error 0xC0014062.
Description: The LoadFromSQLServer method has encountered OLE
DB error code 0x80004005 (An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.). The SQL
statement that was issued has failed.

Hi Thanks for your reply, But the packages are already running under window authentication.
Please suggest something.The url you have given as reference does not solve my issue
I have tried to run 32 bit dtexec, I get below error'
Could
not load package because of error 0xC0014062.
Description:
The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server
does not allow remote connections.). The SQL statement that was issued has failed.

Hi, I get the error OLE error code 0x80040154

OLE error code 0x80040154. Class is not registered. OLE Object is being ignored Record number 24. I get this error when i run a form which has a table with data ,DLL and happen just sometimes.

Check the following link(s
https://social.msdn.microsoft.com/Forums/en-US/7a3eadae-5b6d-43f0-8d7a-787049fb5d22/ole-error-code-0x80040154-class-not-registered-ole-object-is-being-ignored-record-number-64?forum=visualfoxprogeneral
https://social.msdn.microsoft.com/Forums/en-US/9bab0102-22e5-4d3d-ac23-c992bac4c3be/ole-error-code-0x80040154?forum=visualfoxprogeneral
https://social.msdn.microsoft.com/Forums/en-US/46362d0a-db46-4301-9254-bf5d11a3d29e/ole-error-code-0x80040154-class-not-registered?forum=visualfoxprogeneral

Problem loading metadata from ODI to HFM ( Error code: 0x80040154 [Class...

Hi Experts
I have an issue when I load metadata via ODI to HFM. I get this message:
Error code: 0x80040154 [Class not registered
com.hyperion.odi.common.ODIHAppException: Metadata load failed. Error code: 0x80040154 [Class not registered
After some search on the net I see that this is due to a patch which is already been installed(ODI 10.1.3.5.5). The HFMDriver.dll is renamed as HFMDriver32.dll and HFMDriver64.dll rename as HFMDriver.dll.
Patch 9377717: ORACLE DATA INTEGRATOR 10.1.3.6.0 PATCH
1. I have reversed the HFM application TestApp into target for ODI and everything seems fine in the operator
2. I have created a simple source flat file for the Account dimension
3. I have created an interface to the Account dim. and verified the mapping with no errors
4. The process stops when trying to Load the Metadata to HFM(Step 5 / of 7)
5. When I search the log I see the Error code: 0x80040154 [Class not registered]
Does anyone have any idea why the interface does not load the metadata?
Brs
Inge Andre
Edited by: 819836 on Apr 14, 2011 12:49 PM

This instructions given us by the support have fixed the problem on the first topic.
1. Unregister the adapter by opening the command prompt and changing the path to
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ RegSvcs.exe /u C:\Hyperion\products\FinancialDataQuality\SharedComponents\AdapterComponents\fdmAdapterCOMadmin\fdmAdapterCOMadmin.dll
and:
RegSvcs.exe /u C:\Hyperion\products\FinancialDataQuality\SharedComponents\AdapterComponents\fdmFM11xG5C\fdmFM11xG5C.dll
Please verify the correct path to the dll's before proceeding
2. Re-register the adapter using the 64 bit version of RegSvcs, C:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\RegSvcs.exe <PathToDLL> i.e. ..\Hyperion\products\FinancialDataQuality\SharedComponents\AdapterComponents\fdmFM11xG5C\fdmFM11xG5C.dll
N.B. Do not re-register the ComAdmin.dll because that is not a 64 bit component.
4. Open the FDM workbench and configure the adapter by right clicking the adapter -> Configure and re-entering the username and password.
Regards.

Error synchronizing folders in Outlook 2010

I have an IMAP account set up on Outlook 2010 using Windows Vista and every so often (not all the time), I get the following message:
Task 'Synchronizing subscribed folders for [email protected]' reported error (0x800CCC0E) : 'Outlook cannot synchronize subscribed folders for [email protected] Error: Cannot connect to the server. If you continue to receive this message, contact your
server administrator or Internet service provider (ISP).'
I thought it may be my McAfee anti-virus, but I disabled the firewall and continued to get the message. This error doesn't always pop up and the folders do sync most of the time. It's only sometimes I get this error. Any idea what is the cause and how
to resolve? Thanks.

I know that you disable the McAfee anti-virus but no avail. Have you also turn off the email integration(scanning) option? If not, please try it.
Some people reported that they resolved it after uninstalling McAfee and then re-install it without the email integration(scanning) option.
Tony Chen
TechNet Community Support

Error Code 8224 Ldifde Exchange 2010 installation failure

Hi, here is a problem I have been bashing my head with for about a week. I am transitioning to Exchange 2010 from 2003. I have two DC's running Windows Server 2003 Sp2, one of which is the Exchange 2003 server. I have just brought online a windows 2008R2
member server, which I am attempting to install exchange 2010 on. I get the following error message during installation.
Organization Preparation
Failed
Error:
The following error was generated when "$error.Clear(); install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema1.ldf")" was run: "There was an error while running 'ldifde.exe' to
import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\PostExchange2003_schema1.ldf'. The error code is: 8224. More details can be found in the error file: 'C:\Users\administrator.CFN\AppData\Local\Temp\2\ldif.err'".
There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\PostExchange2003_schema1.ldf'. The error code is: 8224. More details can be found in the error file: 'C:\Users\administrator.CFN\AppData\Local\Temp\2\ldif.err'
Elapsed Time: 00:00:22
And from the ldif.err:
The connection cannot be established
The error code is 8224
Now I have checked dns, all is good. I can resolve the DC without issue.
I have done dcdiag and netdiag and passes all tests. I have even written a hosts file, all this to no avail.
Any help would be appreciated.
Thanks
B

I had a same and I fixed this........
Solution
1. The error is happening at the "Organization Preparation" stage, so let's go 'old school' and do that manually.
2. Locate the server on your network that is the schema master (Locate FSMO Servers).
3. Put the Exchange 2010 DVD in the schema master (Or share it over the network and connect to it from the schema master server).
4. Drop to command line and change to the DVD Drive/Directory with the Exchange 2010 setup files in it.
5. ONLY do this if you have Exchange 2003 already! Run the following command, (If no Exchange 2003 present, skip to the next step).
X:\Setup /PrepareLegacyExchangePermissions (Where "X" is CD ROM derive letter)
6. Run the following command:
X:\Setup /PrepareSchema
7.
Run the following command:
X:\Setup /PrepareAD
Note: At this point it may fail, and say it requires an organization name, (it will do this if it finds no existing container in Active Directory).
Error
Exchange organization name is required for this mode. To specify an organization name, use the /organizationName parameter.
If that is the case, then run the following command:
X:\Setup /PrepareAD /OrganizationName:"Your required org name"
Reboot your server and try to install exchange 2010.
Jotiba Patil

Error code 17092 in outlook

I have jsut installed the latest and greatest version of microsoft office and it has outlook. I try setting up outlook and I am receiving messages, but I can not send. I have done the same thing on multiple computers excet this on and this one does not send. I get a error code of 17092 with a 5.7.1 Authetication required. I know for a fact I put all the correct information in. Can anybody help?

Please repost in the Office for Mac Product Forums, it's a Microsoft product so that is the most likely place to look for support.

Why am i getting error code 17895 in outlook

I am trying to get my mail, I have had this email setup for several years and suddenly gives me the message "connection to the server failed or was dropped" Error code 17895. It will no longer send or receive mail

As Outlook is not an Apple product and not a lot of people here seem to be using it, your resource for the best and fastest help will be the Microsoft Office:Mac forums here:
Office for Mac forums
People there are very helpful and knowledgeable of Outlook issues,.

Errors Sharing Calendar in Outlook 2010

Hello,
I have an issue with sharing calendars to someone that is in the same Exchange org on Exchange 2013 CU3 when using Outlook 2010. When trying to share I get this error message:
"Error while preparing to send sharing message"
The exchange org that I'm trying to connect to is published from behind a TMG deployment, and effectively everyone is an external user. I've tried doing a wireshark packet capture at the time when I get the error, and from the information I see, it looks
like its trying to connect to the right target. At the same time, if I watch the TMG logs as I'm generating this error with a filter to see all IP from the address of my connecting location) I see no attempt to connect to TMG at all.
I've checked in the event log of the work stations I'm using (tried more than one) and I get an event ID 300, which basically just states the same message as above, with P1 value of 301931, P2 value of 14.0.7015.1000, P3 value of 634y and P4 value of
0x80004005.
I've found an article for this exact same issue that applies to Outlook 2007, so I'm wondering if it's basically the same issue, but Microsoft haven't spotted or updated the article:
http://support.microsoft.com/kb/2836889
I've found this article (and more) but none do the trick for me:
http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/Q_26529686.html
I've also seen one that asks to check whether the DB is corrupt and to check autodiscover, but an exchange connectivity test against my domain comes back all green. I've also tried to make the same check with the same client against an Office 365 mailbox
and Outlook 2010, and I do not get the error there (guess it might be because they're using different authentication mechanism). I've tried a few things (patching Office 2010 up to the latest SPs and updates, updating the client with .Net updates, installing
.Net 4.5.1( but none work for me.
I've also found that this is not an issue if using Outlook 2013.
Does anyone have ideas on what might be the cause of this?
Thanks

One thing that I'm sometimes seeing when I hit the send request from Outlook 2010 is a line in the TMG log that indicates it's going to
http://domainname/autodiscover/autodiscover.xml (where 'domainname'
is the real domain name in use). We have a rule for this with a /* path that directs traffic off to another set of servers not related to email at all. I think I'm going to try adding a rule above this one with /autodiscover/* as the only path,
and do a deny/redirect to the full autodiscover address.
Incidentally, if I run a wireshark capture when doing this from an Outlook 2010 client, I see that its trying to hit the HTTP address of my TMG server, but I see no traffic at the TMG server (not from the log view anyway). If I do the same from an Outlook
2013 client, I see wireshark trying to hit the same HTTP listener address, but at TMG I see an EWS lookup.
I'll update when I've tried the new TMG rule.

How do I solve the error code -19946, Microsoft Outlook for Mac 2011

I'm getting an error: error code -19946
Error
Could not synchronize record: <Message Name> to Exchange server: <Exchange Server Name>
Details
ChangeKey is required for this operation.
Error code
-19946
when using Microsoft Outlook for Mac 2011. When looking up the error, Microsoft has a solution for windows users, but not for mac users. http://support.microsoft.com/kb/2556352
Any ideas? Solutions? Help!

As Office is not an Apple product, I strongly recommend asking in the Microsoft Office:Mac forums here:
Office for Mac
Everyone there is a Mac user AND an Office user, something you can't say about Apple's forums. You will get the fastest help there and I think you will find the contributors more than helpful.

OLE error code 0x80040154:unknown com status code

I have been trying to log on to a visual fox pro database and get this error .please help in sorting it out currently on windows 8.1.thankyou

What did you use? VFP OLEDB Provider?
Any additional info about the error?
And code so far?
Googling the OLE error code suggests "class not registered". So do you try to use the VFP OLEDB Provider without first installing it? Or if you installed, did you have any installation errors?
Unlike MSSQL client tools often already installed neither VFP ODBC nor OLEDB drivers are a standard preinstallation of Windows or any major product.
Bye, Olaf.
Olaf Doschke - TMN Systemberatung GmbH
http://www.tmn-systemberatung.de

Runtime Error on XP with Outlook 2010

I get Runtime errors too.
When i want to open an PDF in my Office 2010 Outlook then i get a runtime error.
Whats to do?
Greets
Olaf

A good idea would be to search for this problem in discussion forums (such as this one) and also to reinstall both Outlook and Adobe Reader to see if this resolves the problem.
John
http://www.ep1c-gaming.co.uk

Getting LabVIEW load error code 59 using LabVIEW 2010 with a Run Time Engine.

I use a vi compiled with a run time engine to run separate vi’s in my application directory. Once a file association is made with this exe file any Vi in my application directory is available to be loaded as needed. This is a process that has been very successful for me over the years and would prefer to continue using this process. Most of my applications are running in LabVIEW 8.6 and have moved them to 2009. First indications are in 2009 this process is still working. However, I plan to go on to 2010 before upgrading my test stations.
In 2010 I get the error 59: “The source file’s compiled code has been separated, and this version of LabVIEW does not have access to separated compiled code.”
The same dialog box also presents, (Hex 0x626) “Cannot open a VI with separated compiled code in a Run Time Engine that has no access to the VIObjCache.”
What can I do in the build that will get around this error?
Thank you

Thank you for the solution. I am sure this works until the next vi in the vi library gets this option selected.
The bigger issue is I was doing something that National Instruments did not support. When I started in the days of LV 4.0 it was recommended to me that I use this method as virtually all my applications were for in house projects. This is still my preference because it gives the most versatility and allows modifications of single files rather than compiling the entire application.
The final solution I ended up with for those who may be having the same issues. My recommendation for what it is worth, is to compile the application as an executable. This is from what I can tell the only acceptable and supported method. Using this method the problem is solved.
I have accepted this as the solution. I still don't like it. I could list the reasons why but it is a mute point.
Thanks again for taking the time to respond to this issue and offer the solution you found.

When i try to delete my exchange account there is an error code and closes outlook no number on the code

HELP!!! quit job, need to delete old exchange account , outlook will not let me. just an error window pops up and says close outlook. how do i delete this account?

You don't have an option, close Outlook. Then reopen and check if the account was removed or not.

Failed to schedule Software Protection service for re-start . Error Code: 0x80040154.

Any one ever get this error in the event Viewer? I think its some sort of permissions issue for a software installed. But I can't seam to figure it out.
Bizquick

Hi,
This is usually caused by corruption in the scheduled task.
Please post the detail event id in application event log.
Meanwhile, you could have a try the following solution:
Recreate the task:
Net stop SPPSVC
Rename or delete the 3 files
from C:\Windows\System32\Tasks\Microsoft\Windows\SoftwareProtectionPlatform
SvcRestartTask
SvcRestartTaskLogon
SvcRestartTaskNetwork
From another working machine copy the 3 files or extract the files from the
DVD\ISO \sources folder using the install.wim file as your source
Rename with .xml extension
Import into Task scheduler
Run net start sppsvc
Regards.
Vivian Wang

Error code 0x80040154 in Outlook 2010

Similar Messages

Maybe you are looking for