Error code 0x80070002

We are trying to install Microsoft Windows 2008 R2 SP1 in our Dell PowerEdge T110 Server.
The server uses S300 Dell PowerEdge RAID Controller which requires driver installation which we did on each installation using the driver provided by DELL via a Thumb Drive.
The installation went on well for the other 3 servers.
But we are getting the following error message particularly on this server.
“Windows cannot install required files. the file does not exist. Make sure all files required for the installation are available, and restart the installation . Error code 0x80070002”
I have tried the following measures to eliminate this error message.
1) Burnt countless “Moser Baer” DVDs in 1X speed in IMGBurn.
2) Burnt in different DVD Burners (Hardware) too.
3) Deleted / Formatted / Created partitions in the hard drive multiple times.
4) Diagnosed for any hardware problems using DSET Tool from Dell and found none.
5) DSET Tool based on CentOS 6 Live CD working without any issues which confirms the DVD Reader’s quality.
6) I have attempted to create a Bootable Windows 2008 R2 Thumb drive with following steps.
a. select disk 2
b. clean
c. create partition primary
d. select partition 1
e. active
f. format quick fs=fat32
g. Extracted the ISO contents to Hard drive and copied the content to the USB Thumb drive.
h. But the server couldn’t boot from the USB as even the option doesn’t show.
i. Dell customer support says the thumb drive was not boot-able.
Please assist us in rectifying the issue.

Hi Raghu Sunderam,
Could you try to check your hardware firmware and upgrade to latest version or change a new hard disk then install again, if it not work please try to use DAS storage then install
again.
More information:
Storage Technologies Overview
http://technet.microsoft.com/en-us/library/dn610883.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Error code: 0x80070002 while attempting back up

Just upgraded Vista to Windows 7 Home Premium. When attempting to back up to an external hard drive with Windows back up in control panel it stops at about 20% completed and gives me the error code: 0x80070002. What can I do to fix this so that I can back up?

Hi NubeeW7,
This issue may occur if there are duplicate accounts on the computer.
Please try the following suggestions and see if the issue can be resolved:
Step 1: Backup registry key
==============
1. Click Start, click Run, input "REGEDIT" (without quotation marks) in the Search box and press Enter.
2. Navigate to the following registry key by expanding the "+" beside the registry tree in the left pane:
HKEY_LOCAL_MACHINE/Software/Microsoft/Windows NT/CurrentVersion/ProfileList
3. Right click on "ProfileList", click "Export"; please name the file as "RegBackup" (without quotation marks) and then save it to the C:\ drive as a backup.
Note: In case we need to undo the modification, we can double click this RegBackup.reg file to restore the registry key.
Step 2: Delete the duplicate account
===============
1. Click the Start button, type “regedit” (without quotation marks) in the Search box and press Enter.
2. Navigate to the following registry key by expanding the "+" beside the registry tree in the left pane:
HKEY_LOCAL_MACHINE/Software/Microsoft/Windows NT/CurrentVersion/ProfileList
3. Delete the duplicate profile list keys there.
4. Exit the registry editor and reboot the computer to check the results.
Please check if the issue can be resolved.
Regards,
Linda

Lock Screen Group Policy - Error code 0X80070002

Hi
I'm trying to update the workstation policy (2008R2) to show a new Lock Screen for our users.
I have two policies:
-Windows 7 Workstation Policy
-Windows 8.1 Workstation Policy
It was no problem for our Windows 7 machines.
Windows 8.1 however wouldn't change.
The picture downloads successfully to the client directory I specified in the policy, resolution and size are ok.
I've tried deleting the sysdata folder on test machines (This left me with a blue lock screen, but still better than what they chose ;)
I've tried default and unique filenames, and different folder locations under 'Force A Specific Lock Screen'
I've disabled/enabled 'Force a Specific Lock Screen'
I came across this warning on the client test machine:
The computer 'backgroundDefault.jpg' preference item in the 'Win8.1 Policy}' Group Policy Object did not apply because it failed with error code '0x80070002 The system cannot find the file specified.' This error was suppressed

Hi ,
Can you please post the gpresult report here? And also ensure there is no policy processing failure in the problematic machines. That you can verify by seeing the gpsvc logs.
Regards, Prabhu

Cannot Add PST File to Outlook 2010. An Unknown error occurred, error code 0x80070002

Computer is running Windows 7 64 Enterprise with Office 2010.
There was a PST file that was connected to the computer until we had a network outage yesterday. I deleted the entry for the PST file and went to add the PST file back and received the following message when I clicked the "add file" button.
An Unknown error occurred, error code 0x80070002
I have ran the Office repair, and recreated the users profile on the computer.
The users PST file connects to other computers without an issue. I would like to have to avoid having the wipe the computer and do a clean install.
Please let me know if you need more details.

The users PST file connects to other computers without an issue.
Are you saying the same PST can be used on other computers without an issue? At what exact point do you get this error? In which dialog and which exact button click?
Please try to create a new profile and let it build a new pst file. Later, you can redirect it to your existing PST file and see if it works.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Backup Error Code 0x80070002

New desktop, trying to do its first BU to an external usb connected drive that is 500GB and freshly formated (NTFS) on this system. BU fails after about 60% complete with error code 0x80070002. No further details, no mention of skipped or not found files, etc. Desktop has 6GB RAM and Nvidia GeForce 705 1GB graphics. BU works OK if saved to (6) DVD's.
Already tried the commonly reccomended solution of MS patch KB976972. When trying to install it reports "update not applicable" and doesn't complete. On another forum I saw an older entry about assigning a letter to a hidden partition that fixed this problem for lot of people. I am not sure what that is all about.
Is there a solution I can implement to fix this problem?
Thanks!
Ted

New info re:my backup problem. Moved external HDD to one of the USB 2.0 ports in the back of the system and everything worked OK. So its specifically the 3.0 USB ports.
If there is a resolution to this issue I would be interested in implementing it, the 2.0 ports are very slow but at least they work. If no solution, well, I can get a backup and an system image copy so I am good for now. I'll watch this post for a while to see if something comes up. If not I'll close out as resolved.
All the Best,
Ted

Failed to evaluate package P01000XX, Error code 0x80070002

I have a package that got deleted while it still had all the DP's listed under content location, so now I have every site flagged with a big yellow warning.
Not really a big deal but before I could just look at all 54 secondary's at a glance and see green but now I have to select each one to check its status.
Anyone know how to remove it like it never existing so my update status points will go back to green?

Hi,
Does the smsdpmon.log still say "Failed to evaluate package P01000F3, Error code 0x80070002" now?
Please check the blog below.
If the package is not on the site, you must remove the package from WMI on the distribution point. The namespace to connect to is root\sccmdp.
Troubleshooting Content Mismatch Warnings on a Distribution Point in
System Center 2012 Configuration Manager
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Task sequence failed with error code 0x80070002

I am facing issue in OS deployment my machine PXE boot successfully but on the step of apply operating I got an error "task sequence failed with error code 0x80070002"
I see lot of thread describes to add Network Access Account I already added but still I receive same error please help
Usama Arif

i had this happen on two of my dp's the other day. It drove me nuts, I ended up removing the DP Role, removing the server from SCCM
I then deleted all files on the 'D :' drive
after everything was deleted, I re-added the Server to SCCM and gave it the DP Role back.
I then added the DP Back to the DP Group to receive all packages that was on it before. then finally once everything was re-uploaded my users were able to pxe boot again

[Windows 8] Error code: 0x80070002 "The system cannot find the file specified."

Hi,
I'm using windows Here is the DISM logs:
2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:33, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Warning 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:34, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Warning 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Warning 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:35, Info 2014-01-12 17:46:36, Warning 2014-01-12 17:46:36, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Error 2014-01-12 17:46:48, Error 2014-01-12 17:46:48, Error 2014-01-12 17:46:48, Error 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Error 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info 2014-01-12 17:46:48, Info Thanks,
Pi 8. I got this error while I tried to install .net framework 3.5.
DISM PID=3672 TID=3696 Scratch directory set to 'C:\Users\Pi\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
DISM PID=3672 TID=3696 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
DISM PID=3672 TID=3696 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadLocalImageSession
DISM DISM Provider Store: PID=3672 TID=3696 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
DISM DISM Provider Store: PID=3672 TID=3696 Failed to get and initialize the PE Provider. Continuing by assuming that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
DISM DISM Provider Store: PID=3672 TID=3696 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
DISM DISM Provider Store: PID=3672 TID=3696 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
DISM DISM Provider Store: PID=3672 TID=3696 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=3672 TID=3696 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
DISM DISM Provider Store: PID=3672 TID=3696 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
DISM DISM Manager: PID=3672 TID=3696 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
DISM DISM Provider Store: PID=3672 TID=3696 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
DISM DISM Provider Store: PID=3672 TID=3696 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
DISM DISM.EXE:
DISM DISM.EXE: <----- Starting Dism.exe session ----->
DISM DISM.EXE:
DISM DISM.EXE: Host machine information: OS Version=6.2.9200, Running architecture=x86, Number of processors=4
DISM DISM.EXE: Dism.exe version: 6.2.9200.16384
DISM DISM.EXE: Executing command line: Dism /online /enable-feature /featurename:NetFx3 /All /Source:F:\sources\sxs /LimitAccess
DISM DISM Provider Store: PID=3672 TID=3696 Getting Provider FolderManager - CDISMProviderStore::GetProvider
DISM DISM Provider Store: PID=3672 TID=3696 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=3672 TID=3696 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=3672 TID=3696 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Manager: PID=3672 TID=3696 physical location path: C:\ - CDISMManager::CreateImageSession
DISM DISM Manager: PID=3672 TID=3696 Copying DISM from "C:\Windows\System32\Dism" - CDISMManager::CreateImageSessionFromLocation
DISM DISM Manager: PID=3672 TID=3696 Successfully loaded the ImageSession at "C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7" - CDISMManager::LoadRemoteImageSession
DISM DISM Image Session: PID=2288 TID=1428 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
DISM DISM Provider Store: PID=2288 TID=1428 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
DISM DISM Provider Store: PID=2288 TID=1428 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Loading Provider from location C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\OSProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Connecting to the provider located at C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\OSProvider.dll. - CDISMProviderStore::Internal_LoadProvider
DISM DISM OS Provider: PID=2288 TID=1428 Defaulting SystemPath to C:\ - CDISMOSServiceManager::Final_OnConnect
DISM DISM OS Provider: PID=2288 TID=1428 Defaulting Windows folder to C:\Windows - CDISMOSServiceManager::Final_OnConnect
DISM DISM Provider Store: PID=2288 TID=1428 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
DISM DISM Provider Store: PID=2288 TID=1428 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Loading Provider from location C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\LogProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Connecting to the provider located at C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\LogProvider.dll. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=2288 TID=1428 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
DISM DISM Provider Store: PID=2288 TID=1428 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Loading Provider from location C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\PEProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Failed to Load the provider: C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\PEProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
DISM DISM Provider Store: PID=2288 TID=1428 Failed to get and initialize the PE Provider. Continuing by assuming that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
DISM DISM Provider Store: PID=2288 TID=1428 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
DISM DISM Provider Store: PID=2288 TID=1428 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
DISM DISM Manager: PID=3672 TID=3696 Image session successfully loaded from the temporary location: C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7 - CDISMManager::CreateImageSession
DISM DISM Provider Store: PID=2288 TID=1428 Getting Provider OSServices - CDISMProviderStore::GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
DISM DISM.EXE: Target image information: OS Version=6.2.9200.16683, Image architecture=x86
DISM DISM Provider Store: PID=2288 TID=1428 Getting the collection of providers from an image provider store type. - CDISMProviderStore::GetProviderCollection
DISM DISM Provider Store: PID=2288 TID=1428 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Loading Provider from location C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\CbsProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Connecting to the provider located at C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\CbsProvider.dll. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=2288 TID=1428 Encountered a servicing provider, performing additional servicing initializations. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Package Manager: PID=2288 TID=1428 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
DISM DISM Package Manager: PID=2288 TID=1428 CBS is being initialized for online use. More information about CBS actions can be located at: %windir%\logs\cbs\cbs.log - CDISMPackageManager::Initialize
DISM DISM Package Manager: PID=2288 TID=1428 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
DISM DISM Provider Store: PID=2288 TID=1428 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Loading Provider from location C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\MsiProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Connecting to the provider located at C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\MsiProvider.dll. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=2288 TID=1428 Encountered a servicing provider, performing additional servicing initializations. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=2288 TID=1428 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Loading Provider from location C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\IntlProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Connecting to the provider located at C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\IntlProvider.dll. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=2288 TID=1428 Encountered a servicing provider, performing additional servicing initializations. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=2288 TID=1428 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Loading Provider from location C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\IBSProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Connecting to the provider located at C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\IBSProvider.dll. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=2288 TID=1428 Encountered a servicing provider, performing additional servicing initializations. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=2288 TID=1428 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Loading Provider from location C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\DmiProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Connecting to the provider located at C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\DmiProvider.dll. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=2288 TID=1428 Encountered a servicing provider, performing additional servicing initializations. - CDISMProviderStore::Internal_LoadProvider
DISM DISM OS Provider: PID=2288 TID=1428 Successfully loaded the hive. - CDISMOSServiceManager::DetermineBootDrive
DISM DISM Driver Manager: PID=2288 TID=1428 Further logs for driver related operations can be found in the target operating system at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
DISM DISM Provider Store: PID=2288 TID=1428 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Loading Provider from location C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\UnattendProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Connecting to the provider located at C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\UnattendProvider.dll. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=2288 TID=1428 Encountered a servicing provider, performing additional servicing initializations. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=2288 TID=1428 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Loading Provider from location C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\Wow64provider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Failed to Load the provider: C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\Wow64provider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
DISM DISM Provider Store: PID=2288 TID=1428 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Loading Provider from location C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\SmiProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Connecting to the provider located at C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\SmiProvider.dll. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=2288 TID=1428 Encountered a servicing provider, performing additional servicing initializations. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=2288 TID=1428 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Loading Provider from location C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\EmbeddedProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Failed to Load the provider: C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\EmbeddedProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
DISM DISM Provider Store: PID=2288 TID=1428 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Loading Provider from location C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\AppxProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Connecting to the provider located at C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\AppxProvider.dll. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=2288 TID=1428 Encountered a servicing provider, performing additional servicing initializations. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=2288 TID=1428 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Loading Provider from location C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\AssocProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Connecting to the provider located at C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\AssocProvider.dll. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=2288 TID=1428 Encountered a servicing provider, performing additional servicing initializations. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=2288 TID=1428 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Loading Provider from location C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\TransmogProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Connecting to the provider located at C:\Users\Pi\AppData\Local\Temp\5DF499C9-D3ED-47D0-9333-6FCE143C6FA7\TransmogProvider.dll. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=2288 TID=1428 Encountered a servicing provider, performing additional servicing initializations. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Transmog Provider: PID=2288 TID=1428 Current image session is [ONLINE] - CTransmogManager::GetMode
DISM DISM Transmog Provider: PID=2288 TID=1428 Audit Mode: [No] - CTransmogManager::Initialize
DISM DISM Transmog Provider: PID=2288 TID=1428 GetProductType: ProductType = [WinNT] - CTransmogManager::GetProductType
DISM DISM Transmog Provider: PID=2288 TID=1428 Product Type: [WinNT] - CTransmogManager::Initialize
DISM DISM Transmog Provider: PID=2288 TID=1428 Product Type ServerNT : [No] - CTransmogManager::Initialize
DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
DISM DISM.EXE: Attempting to add the commands from provider: OSServices
DISM DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
DISM DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
DISM DISM.EXE: Attempting to add the commands from provider: MsiManager
DISM DISM.EXE: Succesfully registered commands for the provider: MsiManager.
DISM DISM.EXE: Attempting to add the commands from provider: IntlManager
DISM DISM.EXE: Succesfully registered commands for the provider: IntlManager.
DISM DISM.EXE: Attempting to add the commands from provider: IBSManager
DISM DISM.EXE: Attempting to add the commands from provider: DriverManager
DISM DISM.EXE: Succesfully registered commands for the provider: DriverManager.
DISM DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
DISM DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
DISM DISM.EXE: Attempting to add the commands from provider: SmiManager
DISM DISM.EXE: Attempting to add the commands from provider: AppxManager
DISM DISM.EXE: Succesfully registered commands for the provider: AppxManager.
DISM DISM.EXE: Attempting to add the commands from provider: AssocManager
DISM DISM.EXE: Succesfully registered commands for the provider: AssocManager.
DISM DISM.EXE: Attempting to add the commands from provider: Edition Manager
DISM DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
DISM DISM Provider Store: PID=2288 TID=1428 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
DISM DISM Provider Store: PID=2288 TID=1428 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
DISM DISM Package Manager: PID=2288 TID=1428 Processing the top level command token(enable-feature). - CPackageManagerCLIHandler::Private_ValidateCmdLine
DISM DISM Package Manager: PID=2288 TID=1428 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
DISM DISM Package Manager: PID=2288 TID=1428 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
DISM DISM Package Manager: PID=2288 TID=1428 Encountered the option "featurename" with value "NetFx3" - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
DISM DISM Package Manager: PID=2288 TID=1428 Encountered an unknown option "featurename" with value "NetFx3" - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
DISM DISM Package Manager: PID=2288 TID=1428 Encountered the option "source" with value "F:\sources\sxs" - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
DISM DISM Package Manager: PID=2288 TID=1428 Encountered an unknown option "source" with value "F:\sources\sxs" - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
DISM DISM Package Manager: PID=2288 TID=1428 Initiating Changes on Package with values: 5, 7 - CDISMPackage::Internal_ChangePackageState
DISM DISM Package Manager: PID=2288 TID=1428 CBS AddSource failed with HRESULT=0x80070015! - CDISMPackageManager::Internal_Finalize
DISM DISM Package Manager: PID=2288 TID=1428 CBS session options=0x20100! - CDISMPackageManager::Internal_Finalize
DISM DISM Package Manager: PID=2288 TID=40 Error in operation: (null) (CBS HRESULT=0x80070002) - CCbsConUIHandler::Error
DISM DISM Package Manager: PID=2288 TID=1428 Failed finalizing changes. - CDISMPackageManager::Internal_Finalize(hr:0x80070002)
DISM DISM Package Manager: PID=2288 TID=1428 Failed processing package changes with session options - CDISMPackageManager::ProcessChangesWithOptions(hr:0x80070002)
DISM DISM Package Manager: PID=2288 TID=1428 Failed ProcessChanges. - CPackageManagerCLIHandler::Private_ProcessFeatureChange(hr:0x80070002)
DISM DISM Package Manager: PID=2288 TID=1428 Failed while processing command enable-feature. - CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x80070002)
DISM DISM Package Manager: PID=2288 TID=1428 Further logs for online package and feature related operations can be found at %WINDIR%\logs\CBS\cbs.log - CPackageManagerCLIHandler::ExecuteCmdLine
DISM DISM.EXE: DISM Package Manager processed the command line but failed. HRESULT=80070002
DISM DISM Provider Store: PID=2288 TID=1428 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
DISM DISM Provider Store: PID=2288 TID=1428 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
DISM DISM Provider Store: PID=2288 TID=1428 Found the PE Provider. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
DISM DISM Provider Store: PID=2288 TID=1428 Finalizing the servicing provider(DISM Package Manager) - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Package Manager: PID=2288 TID=1428 Finalizing CBS core. - CDISMPackageManager::Finalize
DISM DISM Provider Store: PID=2288 TID=1428 Disconnecting Provider: DISM Package Manager - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Finalizing the servicing provider(MsiManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Disconnecting Provider: MsiManager - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Finalizing the servicing provider(IntlManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Disconnecting Provider: IntlManager - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Finalizing the servicing provider(IBSManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Disconnecting Provider: IBSManager - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Finalizing the servicing provider(DriverManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Disconnecting Provider: DriverManager - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Finalizing the servicing provider(DISM Unattend Manager) - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Disconnecting Provider: DISM Unattend Manager - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Finalizing the servicing provider(SmiManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Disconnecting Provider: SmiManager - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Finalizing the servicing provider(AppxManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Disconnecting Provider: AppxManager - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Finalizing the servicing provider(AssocManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Disconnecting Provider: AssocManager - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Finalizing the servicing provider(Edition Manager) - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Disconnecting Provider: Edition Manager - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Releasing the local reference to OSServices. - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Disconnecting Provider: OSServices - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=2288 TID=1428 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM.EXE: Image session has been closed. Reboot required=no.
DISM DISM.EXE:
DISM DISM.EXE: <----- Ending Dism.exe session ----->
DISM DISM.EXE:
DISM DISM Provider Store: PID=3672 TID=3696 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
DISM DISM Provider Store: PID=3672 TID=3696 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=3672 TID=3696 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider

Hi,
Since this is the issue regarding windows 8, I suggest you post the thread here:
http://social.technet.microsoft.com/Forums/en-US/home?forum=w8itprogeneral
Best Regards
Quan Gu

Secondary DPM backup failure with error code 0x80070002

Hello everyone,
I have the following scenario:
Protected Server -> Primary DPM (DPM 2012 R2 UR4) -> Secondary DPM (DPM 2012 R2 UR4 - remote network)
I have created a Protection Group in Primary DPM server containing three folders under C: drive. Backups works fine.
In my Secondary DPM server, I have created a Protection Group containing my Primary DPM server's protected data, which is the entire drive C:.
I am getting the following error while running a Consistency Check on Secondary DPM server:
An unexpected error occurred while the job was running. (ID 104 Details: The system cannot find the file specified (0x80070002))
In the logs, I just see entries like this:
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\MSSQL\DATA\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\MSSQL\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070002] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\
In the DPM console, this data source status icon shows green, however no Recovery Point is created.
Do you guys have any idea on why this is happening?
Thanks for your cooperation.
Best regards,
Bruno Martins

Does Volume C:\ on your primary server involves boot configuration data which is offline?
This can happen due to installation of some 3rd party disk storage management solutions.
The following blog has some details on how to solve file not specified errors:
http://blogs.technet.com/b/askcore/archive/2010/06/18/reasons-why-the-error-enumeration-of-the-files-failed-may-occur-during-system-state-backup.aspx
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx

Windows 7 backup fails with Error Code 0x80070002

I am trying to back up my computer to 32 GB USB flashdrive and I get the error 0x80070002; the system cannot find the file specified.
I've checked the event logs and I see the error: Event 14, volsnap "The shadow copies of volume C: were aborted because of an IO failure on volume C:."
I'm running Windows 7 Home Premium, Service Pack 1, 64x.

As it is a Windows 7 related question, it is recommended to post on Windows 7 forum instead of Windows Server forum:
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
In the meantime a check disk is worth to have a try. Also try to run the backup in off-time to free the system resource.
If you have any feedback on our support, please send to [email protected]

Failed to evaluate package MU100206, Error code 0x80070002

Hello,
my DP is schowing waring:
Porcessing content.
When I check the smsdpmon.log on the affected DP i found that the package 100206 causes the problem.
But under the tab "Content Status" I can find a package, application.... that has this number

Hello Torsten,
MU100206.ini was not in the directory. But the package was listed in the WMI database.
I ran a powershell command to detect:
gwmi -Namespace root\sccmdp -Query "select * from SMS_PackagesInContLib where PackageID = 'MU100206'"
And one to remove the package:
gwmi -Namespace root\sccmdp -Query "select * from SMS_PackagesInContLib where PackageID = 'MU100206'" | Remove-WmiObject
After that, I ran a validation for the DP and the state is now OK (took quiet a while).
THX to you again.

Using Windows 7 Backup (with 3.0 TB drive) the backup fails with an error code of (0x8078002A)

I have tried for over a month to back up my laptop to a new external 3TB drive (DWC130). I have reformatted it, changed my windows backup settings, and read as much as I could about this issue and still have had no success. I have reformatted the drive; I have allowed Windows 7 (64-bit) to back up with its own settings; I have read forums all over and there has been no answer provided that solved this issue. I am hoping someone from Toshiba or this form can provide some direction.

Error code 0x8100002F and or error code 0x80070002 when you back up files in Windows 7
-Jerry

Deployment Failed - Error Codes

Hi.. Again!!!
I'm deploying an App-V Package to a couple of test machines but on the deployment monitoring I get:
Error Code:
0x80070002 (-2147024894)
Error Description:
The system cannot find the file specified.
Does anyone know what I can do here? I've created a whole new deployment etc and still no luck, I'm not sure where I can look to be able to see what file it's actually talking about to try and resolve the issue. Can anyone point me in the right direction?
Thanks... again!!!
Jay

Yes, I know this is an old post, but I’m trying to clean them up.
Did you solve this problem, if so what was the solution?
What does the VirtualApp.log log say?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Error code 5005: 0x80070002 windows 7

HOW DO I FIX THIS ERROR
This question was solved.
View Solution.

Could this be the issue? http://support.microsoft.com/kb/979281
Or this: http://support.microsoft.com/kb/910336
What are you doing when this error code appears?
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Failing with error code 8007002

Attached please find the SMSTS log, I highlighted the error, the OSD worked from another location but failing in my physical location.
G[401 - Unsuccessful with anonymous access. Retrying with context credentials.]LOG]!><time="14:16:49.670+300"
date="12-17-2014" component="TSMBootstrap" context="" type="0" thread="1328" file="libsmsmessaging.cpp:8945">
<![LOG[Using thread token for request]LOG]!><time="14:16:49.670+300" date="12-17-2014" component="TSMBootstrap" context=""
type="1" thread="1328" file="libsmsmessaging.cpp:8795">
<![LOG[401 - Unsuccessful with context credentials. Retrying with supplied credentials.]LOG]!><time="14:16:49.701+300"
date="12-17-2014" component="TSMBootstrap" context="" type="0" thread="1328" file="libsmsmessaging.cpp:8951">
<![LOG[Network access account credentials not supplied.]LOG]!><time="14:16:49.701+300" date="12-17-2014"
component="TSMBootstrap" context="" type="0" thread="1328" file="libsmsmessaging.cpp:8847">
<![LOG[401 - Unsuccessful on all retries.]LOG]!><time="14:16:49.701+300" date="12-17-2014"
component="TSMBootstrap" context="" type="1" thread="1328" file="downloadcontent.cpp:809">
<![LOG[SendResourceRequest() failed. 80190191]LOG]!><time="14:16:49.701+300" date="12-17-2014" component="TSMBootstrap" context=""
type="3" thread="1328" file="downloadcontent.cpp:847">
<![LOG[SendResourceRequest(), HRESULT=80190191 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,516)]LOG]!><time="14:16:49.701+300" date="12-17-2014"
component="TSMBootstrap" context="" type="0" thread="1328" file="downloadcontent.cpp:516">
<![LOG[oDavRequest.GetDirectoryListing (setDirs, setFiles), HRESULT=80190191 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2516)]LOG]!><time="14:16:49.701+300"
date="12-17-2014" component="TSMBootstrap" context="" type="0" thread="1328" file="resolvesource.cpp:2516">
<![LOG[Download() failed. 80190191.]LOG]!><time="14:16:49.701+300" date="12-17-2014" component="TSMBootstrap"
context="" type="3" thread="1328" file="resolvesource.cpp:2534">
<![LOG[DownloadContentAndVerifyHash() failed. 80070002.]LOG]!><time="14:16:49.717+300" date="12-17-2014" component="TSMBootstrap"
context="" type="1" thread="1328" file="resolvesource.cpp:2963">
<![LOG[DownloadContentAndVerifyHash ( pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags,
L"", 0, dwPackageFlags, mapNetworkAccess ), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3052)]LOG]!><time="14:16:49.717+300" date="12-17-2014" component="TSMBootstrap" context=""
type="0" thread="1328" file="resolvesource.cpp:3052">
<![LOG[DownloadContentLocally (pszSource, sSourceDirectory, dwFlags, hUserToken, mapNetworkAccess), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3273)]LOG]!><time="14:16:49.717+300"
date="12-17-2014" component="TSMBootstrap" context="" type="0" thread="1328" file="resolvesource.cpp:3273">
<![LOG[TS::Utility::ResolveSource(pszPackageId, rsPackagePath), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\bootimage.cpp,1076)]LOG]!><time="14:16:49.717+300"
date="12-17-2014" component="TSMBootstrap" context="" type="0" thread="1328" file="bootimage.cpp:1076">
<![LOG[Boot Image package not found.
The system cannot find the file specified. (Error: 80070002; Source: Windows)]LOG]!><time="14:16:49.717+300" date="12-17-2014" component="TSMBootstrap"
context="" type="3" thread="1328" file="bootimage.cpp:1076">
<![LOG[ReleaseSource() for C:\_SMSTaskSequence\Packages\NCB00300.]LOG]!><time="14:16:49.717+300" date="12-17-2014" component="TSMBootstrap"
context="" type="1" thread="1328" file="resolvesource.cpp:3564">
<![LOG[The user tries to release a source directory C:\_SMSTaskSequence\Packages\NCB00300 that is either already released or we have not connected to it.]LOG]!><time="14:16:49.717+300"
date="12-17-2014" component="TSMBootstrap" context="" type="2" thread="1328" file="resolvesource.cpp:3622">
<![LOG[BootImage::ResolveImageSource( pszPackageId, sImagePackageSourcePath, sImageSourcePath), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\bootimage.cpp,731)]LOG]!><time="14:16:49.717+300"
date="12-17-2014" component="TSMBootstrap" context="" type="0" thread="1328" file="bootimage.cpp:731">
<![LOG[TS::Boot::BootImage::StageBootImage( pAssociatedWinPE->GetPackageID(), TsBootProgress, pv, hCancelEvent), HRESULT=80070002 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2231)]LOG]!><time="14:16:49.717+300"
date="12-17-2014" component="TSMBootstrap" context="" type="0" thread="1328" file="tsmediawizardcontrol.cpp:2231">
<![LOG[Failed to stage WinPE. Code(0x80070002)]LOG]!><time="14:16:49.717+300" date="12-17-2014" component="TSMBootstrap" context=""
type="3" thread="1328" file="tsmediawizardcontrol.cpp:2231">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="14:16:49.717+300" date="12-17-2014" component="TSMBootstrap"
context="" type="0" thread="1328" file="commandline.cpp:228">
<![LOG[Set command line: "X:\sms\bin\i386\TsProgressUI.exe" /Unregister]LOG]!><time="14:16:49.717+300" date="12-17-2014" component="TSMBootstrap"
context="" type="0" thread="1328" file="commandline.cpp:731">
<![LOG[Executing command line: "X:\sms\bin\i386\TsProgressUI.exe" /Unregister]LOG]!><time="14:16:49.717+300" date="12-17-2014"
component="TSMBootstrap" context="" type="1" thread="1328" file="commandline.cpp:827">
<![LOG[==========[ TsProgressUI started in process 1404 ]==========]LOG]!><time="14:16:49.717+300" date="12-17-2014" component="TsProgressUI"
context="" type="1" thread="1408" file="winmain.cpp:330">
<![LOG[Command line: "X:\sms\bin\i386\TsProgressUI.exe" /Unregister]LOG]!><time="14:16:49.717+300" date="12-17-2014" component="TsProgressUI"
context="" type="0" thread="1408" file="winmain.cpp:332">
<![LOG[Unregistering COM classes]LOG]!><time="14:16:49.717+300" date="12-17-2014" component="TsProgressUI" context=""
type="1" thread="1408" file="winmain.cpp:204">
<![LOG[Unregistering class objects]LOG]!><time="14:16:49.732+300" date="12-17-2014" component="TsProgressUI" context=""
type="1" thread="1408" file="winmain.cpp:495">
<![LOG[Shutdown complete.]LOG]!><time="14:16:49.732+300" date="12-17-2014" component="TsProgressUI" context="" type="1"
thread="1408" file="winmain.cpp:512">
<![LOG[Process completed with exit code 0]LOG]!><time="14:16:49.732+300" date="12-17-2014" component="TSMBootstrap" context=""
type="1" thread="1328" file="commandline.cpp:1123">
<![LOG[Successfully unregistered TS Progress UI.]LOG]!><time="14:16:49.732+300" date="12-17-2014" component="TSMBootstrap" context=""
type="1" thread="1328" file="utils.cpp:2903">
<![LOG[ExecuteSelectedTaskSequence(fpCallbackProc,pv,hCancelEvent), HRESULT=80070002 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,1568)]LOG]!><time="14:16:49.732+300"
date="12-17-2014" component="TSMBootstrap" context="" type="0" thread="1328" file="tsmediawizardcontrol.cpp:1568">
<![LOG[hrReturn, HRESULT=80070002 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediaresolveprogresspage.cpp,445)]LOG]!><time="14:16:49.732+300"
date="12-17-2014" component="TSMBootstrap" context="" type="0" thread="1328" file="tsmediaresolveprogresspage.cpp:445">
<![LOG[ThreadToResolveAndExecuteTaskSequence failed. Code(0x80070002)]LOG]!><time="14:16:49.732+300" date="12-17-2014" component="TSMBootstrap"
context="" type="3" thread="1328" file="tsmediaresolveprogresspage.cpp:445">
<![LOG[ThreadToResolveAndExecuteTaskSequence returned code 0x80070002]LOG]!><time="14:16:49.732+300" date="12-17-2014" component="TSMBootstrap"
context="" type="1" thread="1192" file="tsmediaresolveprogresspage.cpp:221">
<![LOG[Setting wizard error: An error occurred while starting the task sequence (0x80070002). For more information, contact your system administrator or helpdesk operator.]LOG]!><time="14:16:49.732+300"
date="12-17-2014" component="TSMBootstrap" context="" type="0" thread="1192" file="tsmediawizardcontrol.cpp:1588">
<![LOG[ResolveProgressPage::OnWizardNext()]LOG]!><time="14:16:49.732+300" date="12-17-2014" component="TSMBootstrap" context=""
type="0" thread="1192" file="tsmediaresolveprogresspage.cpp:113">
<![LOG[Activating Finish Page.]LOG]!><time="14:16:49.732+300" date="12-17-2014" component="TSMBootstrap" context="" type="0"
thread="1192" file="tsmediafinishpage.cpp:107">
<![LOG[Loading bitmap]LOG]!><time="14:16:49.732+300" date="12-17-2014" component="TSMBootstrap" context="" type="1"
thread="1192" file="tsmbootstrap.cpp:1271">
<![LOG[Executing command line: X:\windows\system32\cmd.exe /k]LOG]!><time="14:17:26.150+300" date="12-17-2014" component="TSBootShell"
context="" type="1" thread="684" file="bootshell.cpp:860">
<![LOG[The command completed successfully.]LOG]!><time="14:17:26.152+300" date="12-17-2014" component="TSBootShell" context=""
type="1" thread="684" file="bootshell.cpp:942">
<![LOG[Successfully launched command shell.]LOG]!><time="14:17:26.152+300" date="12-17-2014" component="TSBootShell" context=""
type="1" thread="684" file="bootshell.cpp:432">

THe network access account is needed for accessing network resources during the task sequence or software distribution. During OSD, there may not be a computer account yet for the system to use to access the content. You need to set the NAA.
http://technet.microsoft.com/en-us/library/hh427337.aspx
Jeff

Error code 0x80070002

Similar Messages

Maybe you are looking for