Error code 0x80070035 on drive maps in GPO, "Network path cannot be found".

I am trying to apply a GPO that maps drives so that another GPO can then make them available offline for a couple of hundred users.
Every time I try to apply the policy it fails with an 0x80070035 error which translates as a "Network Path cannot be found". The security settings for that particular folder is fine and the user can see it ok, furthermore following logon I can
manually map the drive through windows explorer and through CMD/powershell using the net use command.
The path i tried was \\servername\otherdir\securearea\ which didnt work (i did drop and add the final "\" just in case i was going mad)
i then tried \\servername\otherdir\unsecurearea\ which
still failed
just to prove my lack of sanity i created a folder on the hard drive of the laptop itself, made it a shared folder and tried both \\localhost\sharedfolder and \\127.0.0.1\sharedfolder,
they all fail with the same error code.
i have checked the hosts and the lmhosts files are there is nothing new in there, only the usual MS gumf that has come with every copy on windows since Win95
patience is wearing thin, hair is getting short ...
thoughts anyone?
Nothing is unfixable - with a suitable sized hammer!

Hi klimacher,
Would you please let me know the current situation of this issue? Have you referred to Kelly's suggestion and solved this issue?
Based on your description, I understand that you configure Drive Maps via GPP. However, can’t apply the policy
with error code 0x80070035. If anything I misunderstand, please don’t hesitate to let me know.
If so, you should find Event 4098 as below shows.
When you type the location of this mapped drive, please remove trailing slash on the UNC path. Then apply the
setting and run gpupdate command to update group policy setting. Please monitor the result.
In addition, please refer to the following article and troubleshoot this issue.
Troubleshooting
the Drive Maps Preference Extension in Group Policy: Adding a Share Name with Trailing Slash '\' Returns Error Code 0x80070035
If this issue still exists, please let me know summarily how you configure the Drive Maps. For an example,
where the GPO link? Did link to user OU? Any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

SSRS service application setup error - the network path cannot be found

I'm following the procedure for setting up a new Sharepoint 2013 instance with SQL 2014 reporting services, and got as far as step 10 here http://technet.microsoft.com/en-us/library/jj219068.aspx#sectionToggle4
before getting blocked.
I'm getting an error "Sorry, something went wrong. The network path was not found"
There are a few tips that I came across - none of which helped including a LoopbackAlternative reg edit for potential LDAP issues.
I should not this is a brand new install on an EC2 instance using Remote Desktop to connect to the Windows 2012 server instance.
I'd really appreciate any help in solving this. It's rather maddening that there's no better debug information available.
Thanks so much.

Can't say i've encountered this, but here are a few suggestions... Try right-clicking and running the setup.exe as an administrator. You might also try copying the installation file locally then running. Another thing to consider is connecting
to the doing an RDP session to the console, to see if any errors are being suppressed. This can be done by doing the following "mstsc /admin". Lastly, i believe a log file is generated when you run the setup. Not sure if it only generates
on a success or not.

Software updates deployment error message: Network path cannot be found

Dear All,
I am trying to deploy software updates to the collection but not matter what i try it is always failing with the error message" Network path not found".
Version : SCCM 2007
Rgs,

Hi Can you share what are the errors you can find in the cas.log file. Have you replicated the package to the DPs?
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway

Error Code 0x80070035 - The network path was not found, Windows Server 2008 SP2

I have bee receiving following "error code 0x80070035 - The network path was not found" when trying to open file shares in both directions using Windows Server 2008 Standard SP2 at both ends. The issue is identical to the KB article KB958285, however the hotfix is only valid up to but not including SP2. One of the servers in question has moved several times between 2 subnets seperated by a VPN. I have tried changing settings in and around the local NIC/DNS Suffix and in the network connection sharing centre, but with no luck. Firewalls are turned off at both sites, and pings and AD queries are successful (one server is a DC). DNS is also working correctly at both sites. Any help/suggestions would be appreciated.
Richard

I thought I would add in another scenario, since this link came to the top of my list in the search engine.
We are running 2008 R2 with SP1 (it happened without SP1 as well)
We could not map using UNC (IP, FQDN, or netbios name). We could ping access the other servers via other utils like event viewer and services.msc but just could not map.
In our case it turned out to be a VMWARE issue but we still had to make a regedit change first
You have to go to regedit HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\
And add LanmanWorkstation to Providerorder
I found on a Citrix board that citrix has an issue with this as well
If you're running VM here is an additional step you should do as well
When you upgrade VMware Tools installed with HGFS from ESX 3.x to ESX 4.x, the HGFS driver may not get uninstalled properly. In this case, the virtual machine's network Provider Order tab in Network Connections
> Advanced > Advanced Settings displays incorrect information and the virtual machine may lose network connectivity.
To avoid this issue, uninstall VMware Tools 3.x before installing VMware Tools 4.x.
To workaround this issue, if you have already upgraded VMware Tools:
Click Start >
Run, type regedit, and click OK. The Registry Editor window opens.
Navigate to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\.
Delete the reference to
hgfs.
Reboot the virtual machine.
We found that if you strip out the HGFS, you do not have to reboot for the provider order tab to come back
I hope that this saves people a lot of time. I spent days researching this.
This was the solution for me on 2008 R2 DC w/ Exchange. I do not have VMWare installed but do have Hyper-V. Thank you so much!

Cannot access a shared folder Error code: 0x80070035

Hello Experts,
I have been working on this issue for like three days without a solution. I am truly desperate.
My company just purchased a new Cloud Server that we will use as our development environment for a software project. In order for all the developers (which are all over the US) to access the development environment, we need to have a few shared folders on
that new server.
As soon as we got the server I did the following:
1) Installed Active Directory
2) Created a directory and made it shared - yes IT IS shared.
3) I created a few new users on the new active directory domain
THE PROBLEM:
I can't access the shared directory.
Other developers have been successful in connecting to the shared folder (so the share is working) - all except me.
when I open explorer and type \\IPADDRESS\SHAREDFOLDER instead I get this error (I am not even asked for credentials)
Network Error
Windows cannot access \\IPADDRESS\SHAREDFOLDER
Error code: 0x80070035
The network path was not found.
Things I have already tried:
a) Enable NetBIOS over TCP/IP - on all adapters - still did not help
b) Disable IPv6 - I am not sure how to check if it truly disabled
c) Turned off all firewalls - did not help
d) Mapping a Drive using different credentials - I just get asked for credentials over and over
e) Ping - yes I can see the server
f) My credentials are correct because I can Remote Desktop with the credentials with no problem ( I am administrator)
My Machine:
Brand New Asus G Series
Windows 7 Home Edition
Any ideas?
Sorcerdon

In my case it was that the OU that my system was in did not have firewall rules for network file and printer sharing enabled. I enabled all of the rules for Domain policy and that fixed it.
I noticed a lot of comments about turning off the firewall not working. I can't be 100% sure, but in my experience with Server 2008 and Windows 7, if you want to configure a service that uses the network the base filter engine and the firewall HAVE to be
turned on while you configure. You can turn the firewall off after configuration, but they have to be active during configuration.
Good luck!

Error code: 0x80070035 The network path was not found

"Error code: 0x80070035 The network path was not found" while trying to access another PC running Windows 7 Ultimate I searched and read dozens of similiar posts to try to resolve this issue with no success.
The situation is, I have a router in home with 4 PC's connected. My central PC is running Windows 7 Ultimate. The others are Windows 7 Ultimate again, and 2 running XP Pro. No special Firewalls, just have Windows Firewall enabled on all PC's, and am running KasperskyInternetSecurity2010 on all. (Have disabled these on all PC's and tried to view/connect and it didnt make a difference, same error)
Fact one: not attempting a Homegroup connection at all, just simply wishing to connect in a basic network environment where I can drag and drop files between all PC's in my Home Network or in my house , however its considered. But on the Windows 7 I am unable to view either of the XP's only the other Win7, and when I try to access that one is when I get the "Error code: 0x80070035 The network path was not found".
Furthermore, while troubleshooting the problem I opened a Command Prompt in all computers, then an "ipconfig" to view each ip address. Then began to ping each machine to determin connectivity. Which resulted in partial success. My main Win7 machine (which i am on now) was able to ping successfully to all machines. But all other machines were unable to ping to me (main Win7). with a 100% loss.
So at least I determined this is most likely a helpful fact in resolving this. Going into "services.msc" I made sure that all the obvious services are started and running:
DCHP Client, Homegroup Listener, Homegroup Provider, Link-Layer Topology Discovery Mapper, NetTcp Port SHaring Service, Network Connections, Network List Service, Network Location Awareness, TCP/IP NetBIOS Helper
All strarted and running in Automactic mode.
Not sure what other information I can give at this point, to help assist in fixing this problem. Please dont hesitate to ask for me for more info if needed. Ready and willing to try anything to get this working, except for reinstalling the OS. All my programs work great and do not wish to go through the drama ao reinstalling all my programs and activating them and redoing all my Adobe settings and CAD settings.
Someone please help !

Hi,
In addition, I would like to suggest the following:
Enable NetBIOS over TCP/IP:
1.    Go to “Control Panel\Network and Internet\Network Connections”.
2.    Right-Click on the connection and choose Properties.
3.    Click “Internet Protocol (TCP/IP) Version 4” in the list.
4.    Click Properties, and then click Advanced.
5.    On the Advanced TCP/IP settings windows, go to “WINS” tab.
6.    Under NetBIOS setting, click “Enable NetBIOS over TCP/IP”, and then click OK.
Thanks.
Nicholas Li - MSFT

Satellite A40 - Error code 10- D: drive cannot be found

HELP PLEASE!!!
I really need some help to fix the errors on my system.
A short while ago i accidently deleted the DVD+/- optic drive to my laptop, and when I go to my computer it isnt there?
The sys. tells me that the D: drive cannot be found, and the drive was removed without preperation and cannot be found, Error code 10.
What does this mean, as I have tried to update the BIOS, and it does not need it, and i cannot find a driver for the Satellite A40 from Toshiba.
Also the drivers appear to be ok and the boxes are ticked in the device management, altho the optic drive sometimes has a yellow exclamation mark?
Tried the recovery disk and no luck.
Also the drive doesn't work now, as it doesnt read disks!
Here is the spec. for the computer, and the summary for the error messages. Wouild reallr appreciate any help on this please . . . .
My Computer Information - General
Please wait while information is being collected...
100% (collecting Local Disk information)
Refresh screen
Specifications
TOSHIBA
System Model: Satellite A40
BIOS Version: TOSHIBA Version 1.50
Operating System
Microsoft Windows XP Home Edition
Version: 5.1.2600
Service Pack: 1.0
Location: C:\WINDOWS
PID: 55277-OEM-0011903-00111
Hot Fix: Q817606
Memory (RAM)
Capacity: 2 GB
Here is a listing of the Dr watson error reports that appeared don the system.
25 January 2009 Service Control Manager The Application Management service terminated with the following error: The specified module could not be found.
25 January 2009 atapi The device, \Device\Ide\IdePort1, did not respond within the timeout period.
25 January 2009 Cdrom The driver detected a controller error on .
25 January 2009 atapi The device, \Device\Ide\IdePort1, did not respond within the timeout period.
25 January 2009 Service Control Manager The following boot-start or system-start driver(s) failed to load: Cdrom
25 January 2009 PlugPlayMa nager The device 'T S I A D D-R M S - 6!1"' (IDE\CdRomT_S_I_A_D_D-R_M_S_-_ 6!1"________________1#3"____\3 423362730283321372620202020202 020202020) disappeared from the system without first being prepared for removal.
31 January 2009 Cdrom The driver detected a controller error on .
31 January 2009 Service Control Manager The following boot-start or system-start driver(s) failed to load: Cdrom
24 January 2009 Applicatio n Error Faulting application helpctr.exe, version 5.1.2600.1106, faulting module kernel32.dll, version 5.1.2600.1106, fault address 0x0001a67a.
25 January 2009 MsiInstall er Product: ParetoLogic DriverCure -- Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action DeleteScheduledTask, location: C:\Program Files\ParetoLogic\DriverCure\D riverCure.exe, command: -deletetask
25 January 2009 Applicatio n Hang Hanging application switch.exe, version 0.0.0.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000.

Run Regedit, and remove the Upperfilters and Lowerfilters values from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class{4D36E965-E325-11CE-BFC1-08002BE10318}
Then Reboot. If your CD/DVD burning software fails to work, reinstall that software.

Error code 0x80070035

First, I'm really green with the computer stuff. I know a little, but I read thru the other forums and I don't understand some of it. I'll apologize ahead of time.
So, I set up my main computer for networking according to all the wizards. OS=Windows XP. I have a laptop that runs Vista home. My main computer (which I've renamed) shows up on in my network, but when I try to connect, I get the error message error code 0x80070035 network path was not found. All I want to do is share files and the printer.
Any info would help, and again, I'm apologizing now for my computer illiteracy.

Hi,
Thank you for posting.
Based on my research, I would like to share the following:
1.    Ping the computers with each other by IP Address and computer name to see how it works. Access Windows Vista computer’s share with both \\computer name\folder and XXX.XXX.XXX.XXX\folder to see if they are works.
2.    Ensure NetBIOS over TCP/IP is enabled on both computers
====================================================
1)     Go to “Control Panel - Network Connections”.
2)     Right-Click on the connection and click Properties.
3)     Find Internet Protocol (TCP/IP) Version 4 in the list.
4)     Click Properties, and then click Advanced.
5)     On the Advanced TCP/IP settings windows, go to “WINS” tab.
6)     Under NetBIOS setting, click Enable NetBIOS over TCP/IP, and then click OK.
3.    Please ensure the firewall on both computers are set the enable “File and Printer Sharing”.
Hope this helps. Thanks.
Nicholas Li - MSFT

Network error code 0x80070035

Hello
I have router Siemens SE555 with USB File server enabled and i have one disk connecetd on it. On Windows 7 when I wont to access to disk I get massage Windows cannot acecess \\NetworkDisk. I also have one PC with Windows Vista Business and one with Windows XP and both off them can access to that disk.
I get code: Error code: 0X80070035 The network path was not found.
Please if anyone can tell me what to do?
Thanks

Since you are able to see and access Computer 2 from Computer 1 and unable to see computer 2 from computer 1. I would suggest you to first check with both the computer if the Network discovery is turned on both the computer.
To turn on network discovery
1.Open Advanced sharing settings by clicking the Start button, and then clicking Control Panel. In the search box, type network, click Network and Sharing Center, and then, in the left pane, click Change advanced sharing settings.
2.Click the chevron to expand the current network profile.
3.If network discovery is off, under Network discovery, click Turn on network discovery, and then click save changes. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
Also you may access the link and follow the steps and check if it helps to see the computer 2.
http://windows.microsoft.com/en-us/windows7/Why-can-t-I-connect-to-other-computers
Also you may verify if you can access computer 2 from computer 1 by opening with the run command and typing the IP address of computer 2.
To do this, follow the steps in computer 1.
1. Click on Start
2. In the start search box type \\ipaddress\ of the computer 2 and press enter eg: \\192.168.0.2\
Check if this opens and connects to Computer 2 in the network.
Also you may try to boot both the computer in safe mode with networking and see if they are able to see each other. To boot to the desktop in safe mode with networking keep tapping F8 key during restart. Once you see the option to boot in safe mode with
networking select it and press enter.
Access the link to know more about how to boot the computer in safe mode:
http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

Error Code 0x80070035 shows when I try to Access Windows XP machine from Windows8/Windows7

Error Code 0x80070035 shows when I try to Access Windows XP machine from Windows8/Windows7. in my PC i m installed windows8 and used primary and secondary IP. Primary is used for Access my Domain/Internet and secondary IP is used for access my VPN and
there is no internet on VPN. VPN is only used for my Head Office Appication. After i give secondary IP to my windos8/windos7 PC the Active network status changed to private network and not able to acces windows XP machines. Please Advice...

Hi,
This error means that the Network path was not found. Was Windows XP locating in the same network as the secondary IP on Windows 8/7?
Please try the solution below. Use the IP address of the target computer, not the computer name.
1) Find out what the target computer's IP address is. It is desirable to give the target computer a static private IP address, for example, 192.168.1.10, so it does not change. Use the local windows help when sitting in front of the target computer
to do this if you don't know how.
2) When sitting in front of the Windows 7 computer you want to access the target computer from, open Windows Explorer and in the address bar type \\ followed by the target computer's static address, for example,\\192.168.1.10 and hit enter.
If the target computer uses username/password sharing, after a few seconds you will be prompted for credentials. Enter the same username and password employed to log on to the target computer when you are sitting in front of it.
The target computer will be added to the Windows 7 computer's Network list, appearing as an IP address instead of a computer name. Then you can access its shares just as if it were listed by name instead of by number.
Kate Li
TechNet Community Support

Peer to Peer network error 0x80070035 the network path was not found

We are adding an XP computer to a peer to peer network with Vista machines. The Vista machines can see the XP machine in the network but when clicking to get to share files, message comes up Windows cannot access \\XPcomputer. The message adds that there may be a spelling error or that there may be a problem with the network. But the error message is the one listed in the subject of this email.
XP machine is properly set to share folders and there is no other visible proble. There is no message from the antivirus software so I am assuming the address is within the Antivirus acceptable range. Antivirus is Norton 360.
Any suggestions...very frustrating... thank you

Hi,
Before we start, please access the following article. This KB article introduces our support policies for peer-to-peer network
Using Crossover Cables in Home or Peer-to-Peer Networks
http://support.microsoft.com/default.aspx?scid=KB;EN-US;278870
The error code 0x80070035 indicates that the network path is not found. This behavior occurs if the NetBIOS over TCP IP is not enabled in Windows Vista. Please follow the steps below.
1. Click "Start", input "NCPA.CPL" (without quotation marks) and press Enter.
2. Right click on the connection that you use for the local connection, and then click "Properties".
3. Click Continue button to verify the administrator permission.
4. Click to select "Internet Protocol Version 4 (TCP/IPv4)", and then click "Properties".
5. Click "Advanced" button in the open window. On the "WINS" tab, click to select "Enable NetBIOS over TCP/IP", and then click "OK" to save the setting.
The following article introduces NetBIOS over TCP/IP
NetBIOS over TCP/IP
http://technet.microsoft.com/en-us/library/bb727013.aspx
If the issue is not resolved, you may try to access the computer with \\[IP address] as a work around.

Installer LV7.1 - LabVIEW load error code 21: An external subroutine required for execution could not be found.

Bonjour,
Je cherche à créer un installer portatif utilisant les drivers NI-DAQmx 8.7.1 et NI-CAN 2.6.0.
Je dispose d'un code LV 7.1 et j'ai installé l'application builder 7.1.
Mais une fois l'application installé sur un PC vierge de Labview, j'obtiens le message suivant:
load error code 21: An external subroutine required for execution could not be found.
Ce message est répété plusieurs fois (pour différents VIs) puis le programme ne se lance pas.
J'ai bien veillé à installer les drivers NI-CAN et NI-DAQmx correspondant au préalable sur la machine cible.
En chercant sur le forum, plusieurs pistes m'ont été proposé:
La version NI-DAQ
L'intégration du Run time Engine
Un problème de DLL
J'ai vérifié ces 3 points mais cela n'a pas règlé mon problème.
Résolu !
Accéder à la solution.

Bonjour,
Merci de ta réponse.
En fait, j'ai bien inclu le runtime engine de Labview qui était effectivement la source de l'erreur.
L'installation de NI-DAQmx v 8.7.1 provoque la mise à jour de la version du runtime engine (passage de 7.1 à 7.1.1).
J'ai donc désinstallé Le runtime engine 7.1.1 (ce qui a provoqué la désinstallation de labview et NI-DAQ).
Puis je suis passé par une version plus ancienne de NI-DAQ (7.2) que j'ai adapté (inclusions de DLL et de VIs).
Les messages d'erreurs ont alors tout simplement disparus!

I have purchased two movies on the store that at the time were unable to download, due to a full start up disc. I have now freed up the space and the remainder of the movies wont download. It gives me the error code 8003. I have a good network connection.

I have purchased two movies on the store that at the time were unable to download, due to a full start up disc. I have now freed up the space and the remainder of the movies won't download. It gives me the error code 8003. I have a good network connection and the space for the movies, but cant seem to get it to work. Anysuggestions? It doesnt even let me delete the downloads and start again.

1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2

An error occurred while reconnecting P: to \\JSERVER\Data Microsoft Windows Network: The network path was not found. This connection has not been restored.

Almost every day when I open my computer I get this message:
An error occurred while reconnecting P: to \ \ JSERVER\data Microsoft Windows Network: The network path was not found. This connection has not been restored.
We then have to go through the process of resetting everything from start to finish just so I can connect to the server. There is no reason that we can find that causes this other than maybe windows updating every night. Any suggestions as to how to
fix this?

it sounds like you have a network drive you are trying to map even though you are not logged in maybe in a script or task instead of backing up to :P backup to the share, make sure you have security set properly to run the task when not logged on.
I assume you are running a backup of some sort as this is the backup forum..

Vista - The network path was not found 0x80070035 - Leopard SMB

Hello,
This is driving me crazy. I have Samba enabled and configured properly on my Mac. My XBOX in XBMC can see and access the shares from the Mac perfectly. Vista shows an icon in the My Networks screen for the Mac, but when I double click it I get "The network path was not found" error code 0x80070035. I've already set Vista to work with NTLMv1 correctly. What else can I do? Or is this hopeless? I really wanted my Mini to work as a media server since I have it on all the time anyway.
This is on Leopard 10.5.6.

What does C:\ConfigMgrSetup.log tell?
Torsten Meringer | http://www.mssccmfaq.de

Error code 0x80070035 on drive maps in GPO, "Network path cannot be found".

Similar Messages

Maybe you are looking for