Error code 0XB80ACAA8 on my printer, when trying to connect to my router

Dear Support, I bought the printer 2 weeks ago. It worked perfectly, but since today I get the error code 0XB80ACAA8 when I try to connect to the Router. Can you tell me where the code stands for and what to do in order to resolve this?

Hello,  Please try the below steps. remove the cartridges.Unplug the power cord from back of the pritner.power Off the wireless router.Wait for 60 seconds.plug in the power cord to the printer only.install cartridges when prompted.If issue still exits, its time to replace the printer.Now power on the wireless router.If issue still exists, then check if there is a firmware update for the router. Also change the router settings Channel = 11,  mode= B/g.  Frequency = 2.4 GHzIf issue still persists, then its time to replace the printer. Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.

Similar Messages

  • Error code -45054 from iTunes store when trying to purchase content

    Tried everything I could think of. Had already done a fresh install of OS Mavericks and this issue recently came up. Couldn't find any threads describing a fix so any help is appreciated.
    error code -45054 from iTunes store when trying to purchase content
    Specifically:
    "We could complete your iTunes store request
    An unknown error occurred (-45054)
    There was an error in the iTunes store. Please try again later"
    3 days later...same error code.

    Hello there, Tyger2204.
    The following Knowledge Base article offers up some great steps and additional reference links for troubleshooting issues connecting to the iTunes Store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Feel free to begin with these recommended steps:
    Make sure your computer is up-to-date and meets the following requirements
    Make sure that you can access the Internet on your computer or device.
    Make sure that your computer meets the iTunes minimum system requirements.
    Make sure that your operating system is up to date:
    For Mac: Choose Apple () > Software Update to determine if updates are available for your computer.
    Troubleshoot issues on a Mac
    If you haven't been able to connect to the iTunes Store, a software conflict or your Internet service provider (ISP) may be blocking your access.
    Update iTunes and Safari to the latest version.
    If you have a firewall, your settings may be preventing you from connecting to the iTunes Store. Follow these steps to configure your firewall.
    You may need to reset your keychain. Connection issues are occasionally caused by keychain issues. Learn how to use Keychain First Aid to resolve any issues with your keychain.
    If you're receiving a specific error message, follow these steps.
    If the issue still persists, contact your Internet service provider and confirm that these ports and servers are enabled over your network.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Error codes 43401, 13999 and 25400 when trying to log in on mobile app

    I keep getting these error codes when trying to log in through my mobile app. 43401, 13999 and 25400. The user name and password are correct. I have deleted / uninstalled the app . Restarted the phone. Nothing seems to work.

    Hi suzyrhodes64 - 
    I pulled up your account & see that a ticket was opened.  A tech should reach out to you shortly.
    I also am looking into the source of your errors as well.  I believe you are using the correct username when logging in, but can you please try resetting your password: https://login.comcast.net/forgotpwd/reset?execution=e1s1
    Thanks,
    Rachel

  • Error msg "no modem found!" when trying to connect...

    Hi.
    I'm getting this error message when I tried to connect to N95 via bluetooth as modem, using "One Touch Access". I can use "One Touch Access" to connect with N95 via USB cable, though.
    My hardware is:
    Toshiba R150 laptop;
    Generic bluetooth adaptor with IVT BlueSoleil as driver;
    Windows SP2;
    PC Suite 6.86.9.3;
    Nokia N95
    Any solution?

    hi,
    i know you want bluetooth, but cable is really much better ya know...
    but if you insist on BT, well couple of thing i could suggest:
    test and make sure that BT is working properly, you can do this by sending files via bt on both ways
    make the N95 as default modem, then goto it and query it, just to make sure it is working well...
    thats all i could think of at the moment...

  • I keep getting error "Unable to join the network" when trying to connect to wifi

    Help!  I have tried to connect to multiple networks and keep getting the same error message.  I have reset my network settings and wiped the ipod clean restored.  Any ideas?

    No.
    Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I am getting an error code of 1150 from itunes when trying to sync and back up my ipad

    Need help can not sync or back up ipad4 to computer.

    Settings > General > Restrictions > Install Apps = ON

  • My macbook pro crashes when trying to connect to a router, my macbook pro crashes when trying to connect to a router, my macbook pro crashes when trying to connect to a router

    my laptop has always connected to routers without a problem, but with one particular router, when it connects to it, the computer crashes. Also, when I turn on the computer within the range of the router, the computer will not start.

    It just crashed again with nothing running but the apple website an itunes.

  • I'm getting error code -54 when trying to connect to iTunes store...

    Hello,
    I have been receiving the following message code all week when trying to connect to the store:
    "iTunes could not connect to the iTunes Store, An unknown error occurred (-54).
    Make sure your network connection is active and try again"
    My internet connection works fine.
    Some other strange things that are happening on my MBP with leopard, is that Virus Barrier flashes up IP address after IP address trying to connect to some 5 digit port time and time and time again when I use Skype or any P2P sharing software – rendering them pretty much unusable (a DoS attack maybe?).
    I had started this thread beforehand, I don't know if they are related with the iTunes error code mentioned above.
    http://discussions.apple.com/thread.jspa?threadID=2485199&tstart=0
    Any advice much appreciated.

    I got this error after upgrading to new version. After searching these pages for an answer and not finding a usable one, I simply quit and re-opened iTunes, and... voila! Problem solved!

  • Error code 306 when trying to connect to apple store

    error code 306 when trying to connect to apple store

    Refer here from Apple Article:
    iTunes Store loads partially or returns "Error 306" or "Error 10054"
    Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
    To address proxies, Remove Internet Options proxy settings and connect to the Internet without a proxy.
    To reset iTunes Store cache:
    In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
    Click the Advanced tab.
    Click the "Reset cache" button.
    Click OK and see if the issue is resolved.
      Adjust Parental Controls in iTunes: 
    Open iTunes.
    Access iTunes preferences: 
    On a Mac: From the iTunes menu, choose Preferences.
    On a Windows PC: From the Edit menu, choose Preferences.
    Click the Parental Controls tab.
    Remove restrictions on Parental Controls.
    For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
    For more information on other security software, see iTunes: Troubleshooting security software issues.

  • I keep getting error code 3212 when trying to connect to home sharing.. i am connected to the internet

    i keep getting error code 3212 when trying to connect to home sharing.. i am connected to the internet

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Communication error occurred when trying to connect to server

    I am using RAS SDK to connect to the BO server. While running the report for performing opendocument, it's giving the following error.
    Caused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$CommunicationError: Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
    cause:com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0  completed: No
    detail:Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
    The exception originally thrown was com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0  completed: No
         at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
         at com.businessobjects.rebean.wi.occa.OccaConnection$CDZStubHelper.getService(OccaConnection.java:270)
         at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
         at com.businessobjects.rebean.wi.occa.OccaConnection.doConnect(OccaConnection.java:110)
         ... 38 more
    Caused by: com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0  completed: No
         at com.crystaldecisions.enterprise.ocaframework.idl.OCA.OCAcdz.WICDZServer.CDZHomeHelper.narrow(CDZHomeHelper.java:109)
         at com.businessobjects.rebean.wi.occa.OccaConnection$HomeStubHelper.narrow(OccaConnection.java:338)
         ... 52 more
    Please help me to solve the issue

    Using BO SDK i am connecting to the BO Report Server, to fetch the BO Reports, But while trying to run the report, i am getting the following error.
    Caused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$CommunicationError: Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
    cause:com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM: minor code: 0x0 completed: No
    detail:Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
    The exception originally thrown was com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM: minor code: 0x0 completed: No
    at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
    at com.businessobjects.rebean.wi.occa.OccaConnection$CDZStubHelper.getService(OccaConnection.java:270)
    at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
    at com.businessobjects.rebean.wi.occa.OccaConnection.doConnect(OccaConnection.java:110)
    ... 38 more
    Caused by: com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM: minor code: 0x0 completed: No
    at com.crystaldecisions.enterprise.ocaframework.idl.OCA.OCAcdz.WICDZServer.CDZHomeHelper.narrow(CDZHomeHelper.java:109)
    at com.businessobjects.rebean.wi.occa.OccaConnection$HomeStubHelper.narrow(OccaConnection.java:338)
    ... 52 more
    Please someone help me with the following issue.

  • VISA Error -1073807194 When trying to connect to Dynamixel MX-28

    VISA Error -1073807194 When trying to connect to Dynamixel MX-28
    I'm trying to connect to a Dynamixel MX-28 and receive the above error when I run my VI.
    The COM ports detected by the VI match the ones that I see in Windows 7 Device Manager.
    Any other ideas?
    I've attached the code I'm running below.
    Attachments:
    Single MX-28 Position Control.vi ‏23 KB

    slow wrote:
    I had no idea, actually. I'm just learning Labview (and was handed this code by the previous guy). I appreciate the help.
    I'm guessing I need to replace the "VISA resource name" and "VISA resource name out" blocks (that are currently in the above linked VI) with the "VISA configure serial port" block?
    In a related question, what would be the best way to expand this so that a larger number of servos could be controlled at once?
    Would I just make multiple copies of the current blocks (with several position knobs on the front panel)? Would that make the most sense?
    LOL I was making fun of the unusual place that NI put the VISA serial config, not being sarcastic about you not finding it.  Sorry about that. 
    The config will go right before your write.  If you turn on context help (the little ? in the upper right corner) and mouse over the various things on the block diagram and front panel, you'll see how to use them. 
    Not really sure about a desing suggestion.  An array of position knobs to be indexed accordingly?
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • I have a error of 0x80073715 on my computer when trying download the itunes. i have windows 7. had it on my computer before.

    i have a error of 0x80073715 on my computer when trying to download itunes. i have windows 7. i had itunes on my computer before. any ideas?

    0x80073715
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 0x80073715, or some other number? (If they're another number, what number are you getting?)

  • I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

    I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

    Did you already try these suggestions?
    Check USB connections
    Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    copied from Resolve specific iTunes update and restore errors

  • Error message when  trying to connect Classic 120GB to iTunes    An internal error occurred during: "FindSonarTrackJob". java.lang.NullPointerException

    When trying to connect to iTunes I get this message  
    An internal error occurred during: "FindSonarTrackJob".
    java.lang.NullPointerException

    I too am having this problem and have had, for about a week now.
    I've found that by logging off itunes (if I can), closing it down, and then restarting it, sometimes allows it to work for one transaction (say downloading an updated app). After that it's back to the same error.
    Really annoying.

Maybe you are looking for