ERROR CODE: 0xC004F035 After Replace MB

We have issued with 6 W540 ThinkPad. They all have same issue which is not charging battery. I pu same battery in another W540 it charged well but those 6 W540 not charged. I power on without battery it will turn on and when i put battery it will power on only form battery. I disable aeroplane mode, changed DC-IN cord did not fixed. So I put claims for System Board and I got it. I replaced 1st one work fine. claim another one and replace it got below message. I upgrade BIOS, Update system serial and MTM. Still same issue. I Tried to contact SMSC she email me back need to contact Tecnical Support. I called and let them problems but they told me I have to sned System back to them for repair. We do Depot repair. Is there any body to give me right path.
ERROR CODE: 0xC004F035 ERROR TEXT: The Software Licensing Service reported that the computer could not be activated with a Volume license product key. Volume-licensed systems require upgrading from a qualifying operating system. Please contact your system administrator or use a different type of key.
WARNING: It will be impossible to activate via KMS due to OEM BIOS issues.

When I replaced MB out of 6 w540, all start charging but 4 of them were not able to activate Windows 7 Enterprice (VLK)

Similar Messages

Error code 0xe0ef000e after replacing hard drive HP G72-227WM Notebook PC

the hard drive evidently crashed in my notebook (it would not boot, recovery disks would not work) replaced the hard drive tonight ran the recovery disks (The ones I created when we bought the notebook) The process went smoothly until it was ready to reboot at the end of disk 3. I did not go back into the settings and changed the boot drive back to the hard drive so when notebook came back on it said there was not a boot disk in the cd rom. I started over went to settings and changed this and began recovery process again. First error 0xe0f00013 during disk 2 searched forums and couldnt find anything. Started over again this time the error was 0xe0ef000e during disk 2. What should I do now?
Thanks

Hi
There are few important things that you need to check please find the steps given below.
1) Please go to Bios page and run the Hard drive & Memory test and check if both the test passes. Incase any test fails then you need to replace the part.
2) Please contact HP Technical support and order the recovery disc or click on the weblink given below to order the disc online.
Order Recovery Discs for Windows 7, Vista, or XP
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Installed new HD on Mid-2009 MBP, installed Mavericks, now getting "error code -50" after being on for a while.

So I had the stock 320gb drive that came with my machine. It started crashing, so I pre-empted the loss of data and installed a spare Western Digital 500gb Scorpio Blue drive, installed Mavericks, and restored my data. Almost immediately I began having sporadic issues with the machine being unable to write to the disk, giving me "error code -50" after being on for about a day or so. I usually just restart and it will work for another day or so, but this is getting very tedious, and I'm a bit worried it might be straining the machine, since I can only hard restart (holding power button) when this happens. Usually, right after restarting, I repair the disk permissions, and this seems to fix things.
Is this maybe a bad OS install? Maybe I should back up and try it all again? Or is there a software issue I'm not seeing a solution for anywhere? Most people who are getting the "error code -50" messages seem to be getting them on external drives. Is it just a compatibility issue and I need to seek a new drive?

Thank you for the tips!
OGELTHORPE wrote:
I would check to see if the WD HDD has its own Sudden Motion Sensor. If so, it may be coming in conflict with the one in the Mac. If that is the case, I suggest disabling the SMS in the Mac.
WD5000BEVT does indeed have it's own protection:
ShockGuard™ - Leading-edge ShockGuard technology combines firmware and hardware advancements to protect the drive mechanics and platter surface to meet the highest combined shock tolerance specifications required for mobile and notebook applications.
Source: http://www.wdc.com/en/company/pressroom/releases/?release=3cd471a1-66be-46ba-9f6 7-e15298b0f8a0
Even though I read about it I had not touched any SMS settings in OS X since I did not have any problems before. I disabled SMS in Mac, let's see now.
Melophage wrote:
this could be indicative of a faulty internal SATA cable. /.../
Reteep,
you could try the same thing as well.
In my case I doubt it is the problem because it worked fine before Mavericks, although forcing restart may have done something. I hope disabling SMS helped.

CC app manager update failed with error code 50 after reaching about 35%

Trying to update the CC app manager. The update is always very slow (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?

Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks. I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
The user suggested fix that worked for me was:
1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
2) Started the creative cloud desktop app.
3) The app said it needed to be updated. I hit the update button.
4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
5) Restarted computer in normal mode.
6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time.

Error code msvcr80 after last update now itunes will not open

Error code msvcr80 after last update now itunes will not open. Reinstalled and still does not work

Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
(98968)

Error code -42404 after the 10.4.1 update

Anyone getting the error code -42404 after installing the 10.4.1 update? It appears when I open the itunes store, and tells me to restore my ipod to original settings. I've tried reinstalling and I still get the error. I'm running windows 7 64-bit.

Yes I have 10.5.1.42 and Win7 x64 and have just started getting the same error when iTunes starts up today - although I think iTunes has not updated for a while?
I have just restored my iPhone 4S to a 3GS backup this morning, and now I see this error and am unable to sync with the iPhone - I was able to do this last week.
Have reinstalled iTunes as it suggests but this has not fixed it.
Help!!!

Error code: sec_error_untrusted_issuer, after i add the exception, get the certificate i get a blank page with big letters NOT FOUND.

www.google.com uses an invalid security certificate.
The certificate is not trusted because it is self-signed.
The certificate is only valid for 78-159-121-201.local
(Error code: sec_error_untrusted_issuer)
After i add an exception for the site, i get this:
Certificate Status:
This site attempts to identif itself with invalid information.
Wrong site:
Certificate belongs to a diffrent site, which could indicate an identity theft.
Unknown Identity
Certificate is not trusted, because it hasn't been verified by a recognized authority.
And then a blank page with big letters "Not Found"
== URL of affected sites ==
http://google.com , www.youtube.com , www.omegle.com , www.lockerz.com

Do NOT add a security exception: someone is tampering with your internet connection!
When you ask to connect to these sites using https, Firefox gets a certificate from the website which responds. Anyone can make a certificate, but to be valid the certificate must be signed by an organization which Firefox trusts.
The person responding provided a certificate with its response which which was not signed by anybody, so Firefox doesn't know who sent the response, and neither do you.
In short: you asked to talk to google and google did NOT send the response.
As this is happening for several different websites, the attacker is probably on the network between your computer and the internet. Ask the people you get your internet connection for help: they may have had their computers hacked, may discover that the problem exists further along in the network, or they may even be responsible themselves.

Error code 16 [After Effects]

Why do I keep getting this error code ''16'' I uninstall and re-install and it works but then this error code pops up when i open the after effects program.

Without proper system info and other technical details nobody can know anything.
Mylenium

Unexpected Error Occurred (error code -600) after Leopard Installation

Installed Leopard for the second time.
Everything seems to work fine, but after opening and then closing Mail, I'm unable to open it via the dock. Tried to open by selecting from the applications menu, and get the following message:
The operation could not be completed.
An unexpected error occurred (error code -600)
Same thing with Backup, Parallels too.
Shutdown behavior is odd. From the apple icon, shutdown doesn't work, everything goes away on the desktop, then the spinning wheel (not beach ball), then nothing. Have to power off to quit, can't be good for the hardware.
Any suggestions, or am I doomed to a clean install and reinstalling all of my applications? Thankfully I have a drive backed up with SuperDuper with 10.4!
Thanks for the help.

OK, I've got ContentBarrier X4 installed and this was the cause of my error codes and it looks like several - if not all of my installation issues with Leopard.
Apparently, perhaps with Login KeyChain update, it wiped out the ContentBarrier administration name, and on launch, it was likely blocking the applications.
First, install the Login KeyChain update (see Apple software download page).
Reinstalled ContentBarrierX4 http://www.intego.com/services/updates.asp (make sure to select ContentBarrierX4).
Open ContentBarrierX4 - you'll have to sign in as the administer. You may have to go into Preferences > Accounts > to make sure that you've got admin rights.
Once you logged in, exit, then reboot.
For the first time since installing Leopard, I can shutdown without a hard power off.
Salvation...

Getting "replace hard disk error (#10008)" even after replacing hard disk

Hi!
My laptop- HP Pavillion dv 6502- is 4 years old.
Recently, the hard disk supposedly crashed as I was not able to get anything other than a blank screen. I checked with BIOS diagnostics, and it showed error #10008- Replace Hard disk.
So, I went to an hp service centre and got the hard disk replaced.
My earlier hard drive was a Seagate 160 gb momentus 5400.3 disk.
New one is the Seagate 250 gb disk.
The laptop was working properly the day the hard disk was replaced. BIOS diagnostic status for the disk was "Passed"
But, the very next day when i tried starting the system, I got a blank screen again. I again went to BIOS and ran the diagnostic test. I performed the test twice. It took a lot of time to finish- jumping from Reaching till '80% complete', then jumping back to '10% complete', then '90% complete', then '10% complete', and so on.. finally showing '100% complete' and status : #10008 - Replace hard disk - both the times.
Then, I had to go out of station and so, I didn't touch my laptop for 2 days. When i came back, the computer was working fine and the BIOS test status said "Passed" for the disk
What could be the problem due to which my problem wasn't starting earlier- even after replacement of disk? Is it possible that the disk was not the problem in the first place?

Hi!
Turned out the second new Hard disk was also not fine. I went back to the service centre and got the hard disk replaced again. This time the laptop has been working fine.

Error code 1007F after file with question mark?!

I have a 13 inch MacBook pro which is just over a year old. For the past week or so it hasnt been connecting to my university wifi network, eduroam. Then this morning, when it started up, I received a blank screen with a question mark flashing, which I know is an error with startup. I followed advice on here and got to the Internet recovery stage. I got past that and had to wipe my hard drive, and was in the process of reinstalling OS X Mavericks when I lost connection (it was tethered to my phone as eduroam wasn't working). I have since rebooted but when I get to the internet recovery stage I am receiving error code -1007F. None of the advice so far on here has worked. Please help?! (And please note that I am a 19 year old who has very little technical knowledge)

First, you need to get a reliable Internet connection, preferably Ethernet.
Install OS X Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Error code 0xc0000001 after system recovery attempt--PLEASE HELP--

HI,
I have a Toshiba Satellite C855-S5194 Part number: PSCBLU-066003.
To give you the whole story it begins with my screen going blank while watching Netflix while attatched to a HD tv thru the HDMI. Then the screen went blu and and error code came up. Error code 0xc0000001 and it stated you needed to use recovery tools on your instrallation media.
First I tried using the recovery steps by accessing it in preboot. That did not work.
So I then ordered a 16GB USB recovery flsh drive. I followed the instructions and I was in the recovery mode off the USB. During the process the screen stated the laptop will restart a bunch of times during the process, which it did. Then after it restarted the last time, the screen went blue with an error code 0xc0000001 again. What can I do? Does this mean my hard drive is corrupt? Any insight would be appreciated.
Also, one last thing. If I try to straight up boot from the USB flash drive it seems to boot but then after the Toshiba welcom logo the screen goes blank and stays that way.

How long were you able to watch this movie before it crashed?
Now is it everytime you boot up, you get the BSOD 0xc0000001 ?
Can you start up in SAFE MODE?
"Knowledge should be unrestricted and the most important commodity we can offer to help one another."

Error code -42110 after installing intunes 64

Hi,
after installing iTunes 64 (Windows) on my new Netbook I get an error code (-42110). Also it is not possible to synchronize my iPod. I can press the button "synchronize" but nothing happend. So my music can not be "downloaded" from iPod into new Mediathek.
Any idea what to do to fix it?
Thnaks for support

For the 42110 error try this user tip:
https://discussions.apple.com/docs/DOC-4831
Hope that helps.
Regards.

Error code 2130932483 after 98% of burn complete [was:question]

im getting an error code of 2130932483 with 98% of a burn done on my photo elements. just started after months of perfect working

You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Error code 80070005 after cyan update

After cyan update, I cant sign in microsoft account in my lumia 520. There will be error code 80070005. Help me solve that problem.
Solved!
Go to Solution.

even me also facing this problem plus other installed softwares are also not working and unable to update them from store. Its giving error code : 80070006 for updation.
Is there any issue in cyan update? If so, then why these guys rollout this update after so much testing.
Attachments:
screenshot.jpg ‏483 KB

ERROR CODE: 0xC004F035 After Replace MB

Similar Messages

Maybe you are looking for