Error code 0xC004F074

whenever I open my Notebook, PC setting page gets open everytime. reminds to activate windows. whenever I try to activate it shows error code: 0xC004F074 also I am unable to personalize my notebook. It reminds for activating windows.
I have already updated for Windows 8.1(64 bit).
I am using Hp Pavillion TS 11 Notebook Pc.
Serial No. [Moderator edited Serial Number]
product Number: E4X91PA#ACJ

If Windows 8.1 is the originally installed OS and not an update you can try the following in order to resolve the issue.
Invoke System restore and use it to choose a restore point (perhaps a system checkpoint) dated before the issue began.
The issue you are seeing is frequently caused by a Microsoft Windows update.
Using system restore to attempt to resolve this will not cause you to lose any data. It is completely reversible and safe.
If the Windows 8.1 is installed as the result of a Windows update,then you will have to remove the update or use the recovery media to resolve the issue by reinstalling the original operating system. I highly recommend saving all important data to an external storage device prior to doing that to avoid data loss.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

Error Code 0xC004F074 Win 8.1 Clone

Hello. I have a Toshiba P867-S7102 with two HDD bays. Bought an SSD and cloned WIN 8.1 to that drive, leaving the original HDD in the machine. Changed boot order to SSD first, and all works save the error code mentioned in the title which
will not allow the SSD OS to activate. If I change the boot order back to the original HDD, the OS is activated. The intent of this change is to place the OS and programs on the SSD and use the HDD for storage. I believe my conflict is I
the laptop thinks I have two OS versions running, but I am not sure how to deconflict.
Any help appreciated.

Hi,
According to your descritpion, your Windows 8.1 should be computer build in system and not activated by KMS server, isn't it?
If that it is, one OEM or retailed Windows Operate system license only available to one device. That's to say, you couldn't use one product key to activate another Windows system.
Roger Lu
TechNet Community Support

Windows 8.1 Pro Activation error Error code: 0xC004F074

Good Afternoon,
I am unable to activate windows 8.1 pro. I keep getting the error 0xC004F074. I'm doing testing in a corporate environment and am unable to activate using any of the keys I was given. Here is the read out. I need more than a link to KB article which
is what a lot of moderators seem to post.
<DiagReport>
<LicensingData>
<ToolVersion>6.3.9600.16384</ToolVersion>
<LicensingStatus>SL_LICENSING_STATUS_NOTIFICATION</LicensingStatus>
<LicensingStatusReason>0xC004F056</LicensingStatusReason>
<LocalGenuineState>SL_GEN_STATE_INVALID_LICENSE</LocalGenuineState>
<LocalGenuineResultP>0</LocalGenuineResultP>
<LastOnlineGenuineResult></LastOnlineGenuineResult>
<GraceTimeMinutes>0</GraceTimeMinutes>
<TotalGraceDays>0</TotalGraceDays>
<ValidityExpiration></ValidityExpiration>
<ActivePartialProductKey>9D6T9</ActivePartialProductKey>
<ActiveProductKeyPid2>00261-50000-00000-AA831</ActiveProductKeyPid2>
<OSVersion>6.3.9600.2.00010100.0.0.048</OSVersion>
<ProductName>Windows 8.1 Pro</ProductName>
<ProcessorArchitecture>x86</ProcessorArchitecture>
<EditionId>Professional</EditionId>
<BuildLab>9600.winblue_gdr.131030-1505</BuildLab>
<TimeZone>Pacific Standard Time(GMT-08:00)</TimeZone>
<ActiveSkuId>c06b6981-d7fd-4a35-b7b4-054742b7af67</ActiveSkuId>
<ActiveSkuDescription>Windows(R) Operating System, VOLUME_KMSCLIENT channel</ActiveSkuDescription>
<ProductUniquenessGroups>55c92734-d682-4d71-983e-d6ec3f16059f</ProductUniquenessGroups>
<ActiveProductKeyPKeyId>ace182fe-75fe-ee4b-31e7-9fb20a237002</ActiveProductKeyPKeyId>
<ActiveProductKeyPidEx>06401-02615-000-000000-03-1033-9600.0000-2722013</ActiveProductKeyPidEx>
<ActiveProductKeyChannel>Volume:GVLK</ActiveProductKeyChannel>
<ActiveVolumeCustomerPid></ActiveVolumeCustomerPid>
<OfflineInstallationId>279391091513000076402293552031905464617191194503465138320479443</OfflineInstallationId>
<DomainJoined>true</DomainJoined>
<ComputerSid>S-1-5-21-2574392231-535810584-3362820856</ComputerSid>
<ProductLCID>1033</ProductLCID>
<UserLCID>1033</UserLCID>
<SystemLCID>1033</SystemLCID>
<CodeSigning>SIGNED_INFO_PRS_SIGNED</CodeSigning>
<ServiceAvailable>true</ServiceAvailable>
<OemMarkerVersion>0x00020001</OemMarkerVersion>
<OemId>DELL </OemId>
<OemTableId>CBX3 </OemTableId>
<Manufacturer>Dell Inc.</Manufacturer>
<Model>OptiPlex 990</Model>
<InstallDate>20140303144620.000000-480</InstallDate>
</LicensingData>
<HealthCheck>
<Result>PASS</Result>
<TamperedItems></TamperedItems>
</HealthCheck>
<GenuineAuthz>
<ServerProps>0xc004f200</ServerProps>
</GenuineAuthz>
</DiagReport>

I've personally used this solution (slui 3) to reenter a key when activation wasn't working, but we use MAK, not KMS, so YMMV. I think it may depend on exactly where in the chain things are going wrong.
This is an interesting bit from the link britishdhez posted (these are possible causes of this error message):
DNS record not published at _VLMCS._tcp.client.domain. This must be an SRV record, which the KMS server will automatically register. If you have disabled this, you will need to use a GPO on the clients to point them to the correct KMS server to use
No network connectivity from the KMS client to the MS server on the KMS port (tcp/1688 by default). Install telnet on the client and run telnet KMS.Server.Name 1688 and make sure the screen goes blank
Not more than 4 hours time difference between KMS server and client. Check that your time zones are correct. If using server core, run timedate.cpl
No major hardware changes to the KMS server. If the KMS server is a VM and you have added a number of new devices, CPUs, memory etc, or P2Ved you will need to reactivate your KMS license
The KMS service must have the keys to issue for the KMS client requesting a license. For example, if the KMS server is Windows Server 2008 and you are trying to activate Windows 7, you will need an update installed on the KMS server AND the correct KMS
key for Windows 7."
Also, I know you said no KB articles, but for completeness sake (for folks reading this at a later date who may be troubleshooting):
When trying to activate you get 0xC004F074 with description "The Key Management Server (KMS) is unavailable" - http://support.microsoft.com/kb/974998/en-us

I need help on error code 0xC004F074, i have tried without No and my window doesnt register

good day,i did a recovery and since then my windows cant activate, i have tried alot of cmd followed by what i read on google, but still no avail. can some assist in resloving the issuse.thank you

Greetings for the day seyiefisy Please let me know the model number of the unit and the OS that is installed on it, also let me know what point of time do you get this error message on the unit. so that i can assist you better. Regards,Zoan Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Error code is 0xc004f074

I have loaded Windows Server 2012 on my server and when I try to activate it I am getting the below
no Key Management Service (KMS) and the error code is 0xc004f074
I would like to change the key that is in there now to a new one but it would not allow me to.
Can some one tell me how to fix this error

You can execute: SLUI 3
This will allow you to enter/change the Windows product key
If you want to display the current licensing status, execute:
SLMGR.VBS /DLV
This will display an information window (you can press CTRL+C, to copy the info into the clipboard)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport. I've been using the passport for about a year now without any problems on older Macbooks in my house. I used to be able to read and write to this drive no problem. I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive. When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem. If I try to delete that folder I just created, I get this error:
The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
(Error code -36)
The folder has nothing in it whatsoever. I just created it. But if I go to Terminal and I run
rm -rf "untitled folder"
This works fine. Why is Terminal acting different than Finder? This does not happen on my other Macbooks. Thanks in advance.

Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

Report generation failed----error code:-17205; Access Denied.

Hi, All
    i have a trouble about report generation.it seems the error happened at the "write UUT report"--this step is teststand report generation'DLL.
    detail:
    An error occurred calling 'Save' in 'Report' of 'NI TestStand 2010 SP1 API'
Access Denied.. Error writing to file 'D:\program\seq\xxx.xml'.
The file might be open in another application. If file access is intermittently denied, you should try disabling the Microsoft FindFast utility.
    error code:-17205; Access Denied.
    locationtep 'Write UUT Report' of sequence 'Single Pass' in 'SequentialModel.Seq'
    How to fix it?
    Thanks a lot.
BR

Hm, it looks like the file might be open in another application. If you see that file accesss is intermittently denied, you should try disabling the Microsoft FindFast utility.
CTA, CLA, MTFBWY

There was a recent upadate on my PC, however it does not work. A error code comes up which says, min version is not compatible with max version. And I caanot open my browser. Please help.

I do a system restore which allows me to open my browser. Without this I cannot open my browser - the error code comes up every time.

Do a clean (re)install
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
From https://support.mozilla.com/en-US/questions/764376

My ipod touch is not list as a device on itunes. When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.

Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes

Capturing oracle error codes into a variable

Hi
Can someone show me how it is possible to save an Oracle defined error code into a variable? What I am trying to do is when a stored procedure fails an Oracle error is raised, such as ORA-xxxx, then pass this code into variable to be saved into a log.
How do I achieve this?

user633278 wrote:
How do I achieve this?Function SQLCODE in PL/SQL exception handler returns error code. SQLERRM returns message:
SQL> declare
2      x number;
3 begin
4      x := 1/0;
5    exception
6      when others
7        then
8          dbms_output.put_line('Error code: ' || SQLCODE);
9          dbms_output.put_line('Error message: ' || SQLERRM);
10 end;
11 /
Error code: -1476
Error message: ORA-01476: divisor is equal to zero
PL/SQL procedure successfully completed.
SQL> SY.

Error Code:942 While Scheduling a report in BI Publisher

Hi All,
I am trying to schedule one report in BI Publisher.
After Clicking Submit Button while scheduling report,i get following error:
Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 080319)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist Error Code: 942 Call: UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 50 WHERE SEQ_NAME = 'JOB_ID_SEQ' Query: DataModifyQuery()
Kindly Help me in resolving this issue
Regards
Amrita Singh

i know the issue,i can give quick fix, but in-order to make sure you don't get another glitch like this.
I would recommend, you to install the scheduler in another schema or another db.
Re-installing the scheduler schema tables will fix this.

ORA-00600: internal error code, arguments: [ktsircinfo_num1]

While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors.
. . exporting table TEST4
EXP-00003: no storage definition found for segment(29, 371385)
SQL >Drop table test4 cascade;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
sql> Desc test4;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
I dont want to log TAR with oracle right now... I tried dropping and recreating Undo tablespace but still did not help much . Database version is 9204

hi
read metalink ID - 153788.1
CHeers

Transport control program tp ended with error code 0212

Hi all,
I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
                                                                       service: transport service
                                                                       start : online
                                                                       Function: TMS_TP_SHOW_BUFFER
                                                                       message: TP_REPORTED_ERROR
In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
Can you tell me how to resolve this issue?

dev_tp contains:
This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
unicode enabled version
usage: R3trans.exe [<options>] <control_file>
The control_file describes what R3trans has to do.
The following options are possible:
-c f1 f2 : Copy file f1 to f2 with character set conversion.
-d       : DB connect. Test if SAP database is available.
-i file : Import from file without using a control file.
-l file : List the contents of file to the log file.
-m file : List the contents of file to allow tp to create a cofile.
-t       : Test. All database changes are rolled back.
-t4      : Trace level 4. Switch on developer trace.
-u <int> : Unconditional modes. See below.
-v       : Verbose. Write more details to the log file.
-w file : Log file. The default log file is 'trans.log'.
-x       : DB connect without access on any SAP table.
R3trans.exe finished (0012).
& the slog file is not there in the trans/log directory

While activating a request in DSO getting error code 10

While activating a request in DSO getting error code 10
Hi All,
I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
I have checked the formula in Transformation and it works fine. Still I am not able to load data.
Please help.
Thanks and regards
Vishal Pardeshi

Check the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
Otherwise you can check the error from the monitor screen of the request in Details tab.
Veerendra.

Some data in ... could not be read or written. (Error code -36).

Hello.
I just got a Lacie 512mb disk, and thought it would be ideal for running my iTunes library off of. Got the disk, ran it through its paces, hooked it up to my Mac mini, and I can't seem to copy hardly any files over. Here's one error (but you can replace "iTunes Library" with any song and it's the same thing)...
'The Finder cannot complete the operation because some data in "iTunes Library" could not be read or written. (Error code -36).'
So, I think there's disk or file damage, etc. I boot off an external and run Disk Utility, DiskWarrior and TechToolPro against it - everything checks out fine.
But I can't copy files from the mini's internal to my external Repair Boot disk or the Lacie 512. Always that same -36.
So, at first I think it's the mini, then I think it's the Lacie, because it's new, so I reformat it: same issue. And that coupled with it won't copy to my Repair Boot, makes me think the mini again.
But, I've got a g1 iPod mini hooked up (formatted in hfsj+), and I can copy this file to the iPod mini, but no where else. I not sure what this makes me think.
And, I can duplicate the file on the Mac mini. In fact, if it's a song file that won't copy (none of them will), I can play it just fine.
Thanks.
Mac mini Mac OS X (10.4.3)

I experienced a problem in a familiar way.
After a recording session I tried to copy the complete folder with session and sound files to another disk (original and target disk both LaCie d2 250 FW800).
Somehow the proces stopped prompting an -36 error over some files.
When I look up these files in the Finder, it seems to have an iTunes audio-file icon instead of a ProTools audio-file icon (and so other standard app to open with). All the other files will copy fine. The files will play with quicktime in the preview window.
Any-one a solution?
Almost seems like some kind of copy protection, like implied earlier in this thread. I hope it's not. These are the originals...

Error code 0xC004F074

Similar Messages

Maybe you are looking for