Error code 0xe0ef000e after replacing hard drive HP G72-227WM Notebook PC

the hard drive evidently crashed in my notebook (it would not boot, recovery disks would not work) replaced the hard drive tonight ran the recovery disks (The ones I created when we bought the notebook) The process went smoothly until it was ready to reboot at the end of disk 3. I did not go back into the settings and changed the boot drive back to the hard drive so when notebook came back on it said there was not a boot disk in the cd rom. I started over went to settings and changed this and began recovery process again. First error 0xe0f00013  during disk 2 searched forums and couldnt find anything. Started over again this time the error was 0xe0ef000e during disk 2. What should I do now?
Thanks 

Hi
There are few important things that you need to check please find the steps given below.
1) Please go to Bios page and run the Hard drive & Memory test and check if both the test passes. Incase any test fails then you need to replace the part.
2) Please contact HP Technical support and order the recovery disc or click on the weblink given below to order the disc online.
Order Recovery Discs for Windows 7, Vista, or XP
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

  • How do I reinstall CS6 Extended 64-bit after replacing hard drive and OS?

    How do I reinstall CS6 Extended 64-bit after replacing hard drive and Windows 7 64-bit OS?

    You can download the trial installer directly. Find the appropriate link below.
    You must be on a trial download page to use the links, otherwise you get an error message.
    For example, load the following page: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
    before pasting the link into the address bar.
    http://trials2.adobe.com/AdobeProducts/PHSP/13/win32/Photoshop_13_LS16.7z
    http://trials2.adobe.com/AdobeProducts/PHSP/13/win32/Photoshop_13_LS16.exe
    You need to kepp both files downloaded into same folder and after download click on .exe file to extract .7z

  • MacBook Pro does not boot past apple screen after replacing hard drive

    After replacing hard drive on MacBook Pro 13 inch early 2011 model, the screen only boots to the apple logo.  Do I need to re-install the OS?

    The problem is that the OS is not in any where else of the MacBook Pro than in the HD / SSD. If you replace the Hard Drive, then you will need to Re-install OSX into that hard drive, it's pretty easy.
    1) Power up your Macbook Pro, as fast as you can press and hold the Option key (ALT). You'll see that it opens the bootable-devices you have, you'll see a Recovery partition, click it.
    (If the Hard Drive contains data do the following)
    2) In the menu select Disk Utility.
    3) In Disk Utility go ahead and select the Hard Drive that is inside the MBP.
    4) Erase the content.
    (If the Hard Drive contains no data continue with the following jumping the last 3 steps).
    5) Select Re-install OSX.
    6) Select the Hard Drive in which you want to install it.
    Follow the steps of everything else (it should take approximately 1 hour to do the whole thing).
    Hope this helps!
    Later.

  • HT201250 How to restore laptop from time capsule after replacing hard drive

    How do I reload all my programs and files from a time capsule after changing hard drive?  Also Apple store reloaded with Snow Leopard and not Lion.  Will that be a problem?  Thank you

    Plug the external drive into a computer by usb or whatever box you have available..
    When you say blank, is it correctly formatted.. we recommend HFS+ which is Mac OS Extended (jorrnaled)
    Make sure you use GUID type disk setup not MBR if it came from PC world.
    Copy the files via finder from TC to the external drive.

  • Create a restore point fails with 0x81000101 error after replacing hard drives

    I recent had a hard drive failure so, figuring that I may as well gain something for all of the work, I replaced both drives in my RAID 1 array (thereby doubling the drive space).  I then restored from back up and all has appeared well for several months
    now.  Last week I started having trouble with RDC which led me to potential issues with my Intel RAID driver which finally led me to System Restore points.  It turns out that they haven't been working for some time now and I've been unable to get
    them started using any of the advice in the other discussions on this particular topic.
    All of the necessary services should be running.  I've also tried turning system protection off/on.
    The new information that I provide is that when I first opened the System Protection tab, I found two entries for the C: drive.  The first had protection turned off.  The second, named OS, was listed as missing.  After a couple of attempts
    with the configuration, I ended up with one entry for OS (C:) with protection On.  It still didn't work which led me to the forum and many failed attempts at getting this one feature working.
    One of the other discussions mentioned the RestoreSystem log files.  They are, of course, binary files but I was able to see that I'm getting something called SxRegReadDWORD4FAILED6 fairly soon followed later by a FAILED CSpp::_CreateSnapshotSet.
    I'm hoping that somebody with the right tool and knowledge to actually read those files can help me get restore points working again.

    Hi,
    What is the full error messages? Like this?
    The shared restore point operation failed with error (0x81000101) The creation of a shadow copy has timed out. Try this operation again.
    If yes, then we might take a try with the method mentioned in the below blog:
    Windows Server Backup failed to backup with error 0x81000101
    Let us know the process.
    Best regards
    Michael Shao
    TechNet Community Support

  • Getting "replace hard disk error (#10008)" even after replacing hard disk

    Hi!
    My laptop- HP Pavillion dv 6502- is 4 years old.
    Recently, the hard disk supposedly crashed as I was not able to get anything other than a blank screen. I checked with BIOS diagnostics, and it showed error #10008- Replace Hard disk.
    So, I went to an hp service centre and got the hard disk replaced.
    My earlier hard drive was a Seagate 160 gb momentus 5400.3 disk.
    New one is the Seagate 250 gb disk.
    The laptop was working properly the day the hard disk was replaced. BIOS diagnostic status for the disk was "Passed"
    But, the very next day when i tried starting the system, I got a blank screen again. I again went to BIOS and ran the diagnostic test. I performed the test twice. It took a lot of time to finish- jumping from Reaching till '80% complete', then jumping back to '10% complete', then '90% complete', then '10% complete', and so on.. finally showing '100% complete' and status : #10008 - Replace hard disk - both the times.
    Then, I had to go out of station and so, I didn't touch my laptop for 2 days. When i came back, the computer was working fine and the BIOS test status said "Passed" for the disk
    What could be the problem due to which my problem wasn't starting earlier- even after replacement of disk? Is it possible that the disk was not the problem in the first place?

    Hi!
    Turned out the second new Hard disk was also not fine. I went back to the service centre and got the hard disk replaced again. This time the laptop has been working fine.

  • Kernel panic after replacing hard drive in Powerbook 17"

    I need help with a kernel panic that won't even let me start up. Here's a detailed account of what happened:
    The hard drive in my Powerbook 17" recently failed. Since it is out of warranty anyway, I decided to try to replace it myself. I found a good tutorial with photos online and was careful to rehook everything appropriately. After the replacement, I immediately installed OS 10.2 from my Apple Software Restore CD. It seemed to successfully install on the new HD.
    After installing OS X, I restarted. I got the Apple logo on the grey screen but as soon as the "gear" started spinning, I got a kernel panic. I tried resetting the PRAM and the PMU but still got the panic message so I fired up Apple Hardware Test CD. Without even running the test, it gave me the message that errors were detected with my RAM upon startup. In the Hardware Profile tab, under Memory Overview, it showed:
    768/1024
    SODIMM0/J20STANDARD512/512
    SODIMM1/J23REVERSED256/516
    The last line "SODIMM1..." was red. It appeared that one of the sticks of RAM was damaged. However, when I swapped the sticks, I still got the kernel panic, but the Hardware Profile no longer listed either of the sticks in red and the full 1024/1024 MB was shown.
    Does anyone have any idea why I am still getting a panic message? Could I have damaged the RAM itself or the RAM slot? (I was very careful when pulling it out.) Any help would be much appreciated. This has been a great computer for about 6 years and I hope to get another few out of it!
    Peter

    For anyone interested: I experimented with this a little more last night. By switching the RAM sticks, the memory problem seems to be resolved. I was still getting the kernel panic though so I put the original hard drive (which is on the verge of crashing) back in the machine and everything booted up just fine. It seems like the problem may actually be with the new hard drive. I don't need to do anything to the drive other than pop it in the machine, right?

  • Error code -36 -- Is my hard drive about to fail?

    Hello:
    I am using SuperDuper to backup, and today, I got an error saying that backup failed because of an "input/output" error concerning an mp3 file.
    Someone at SuperDuper suggested I try to duplicate that file using Finder and see what happened.
    Sure enough, when I tried to duplicate the file using Finder, I got an "Error Code -36" message saying that the file cannot be read or written.
    I then chose another file (also an mp3 within the same album) and it, too, failed. All others were OK.
    But then, I went back and again tried to duplicate the original bad file, and this time I was successful.
    Then, I deleted the one bad file, and tried to backup to my external hard drive using SuperDuper...and I was successful.
    However, the person at Super Duper says my internal hard drive is about to fail.
    Can that be true? On an 18-month old iMac?
    I ran Disk Utility/Verify Disk, and it says the Hard Drive appears OK.
    Any advice?
    Thanks!

    Run the free demo of SMART Utility to check your drive.
    http://www.volitans-software.com/smart_utility.php
    Drives can fail at any time, even new ones.
    Message was edited by: WZZZ

  • IMac won't boot after replacing hard drive and restoring from Time Machine

    I was having problems with my iMac but upgraded to Lion when it came out. Had a few good days and then my hard drive died.
    I had the drive replaced and the repair people put Snow Leopard on the new drive.
    I then tried to restore everything from my Time Machine backup. At first when I tried to log on the computer wouldn't accept my password (i know it was right).
    I decided to reinstall again using the snow leopard dvd i had. This time, the computer booted up (didn't ask me for a passord) and looked like it was in the process of setting things up. But Mail kept saying it was going to import messages but then quit and restarted a few seconds later. When i quit it it just came back again and again. I could see Chrome open behind it with my bookmarks in the toolbar and see other restored things, but the overall look was grey and not everything was there.
    When i restarted from the HD and not the dvd i could never get past various shades of grey and the circling progress indicator. Never booted up at all.
    I read about Lion having some restore hd functionality but it doesn't show up when i restart with option key. Am I in limbo between operating systems?
    Any advice as to steps to take? I don't know much about this stuff.
    Thanks for any help.

    Yes, if you picked a Snow Leopard backup, that's what you got. 
    You could pick a Lion backup, and it would restore it, but that wouldn't create the Recovery HD, which you will need, sooner or later.  See Using the Recovery HD.  You'll need to re-download Lion for that to be created.
    When you do that, after downloading but before installing Lion again, you might want to do this: Making a Lion Install disc or partition.  Then if you need to reinstall Lion again, you can do it from that, instead of having to download it again.

  • Pismo does not boot after replacing hard drive

    We have had an old Pismo for several years now. Two or so years ago we decided to replace the stock 6GB hard drive, which was getting full, with a new 60GB drive. We cloned the old drive via target disk mode, popped in the new drive, copied the data back (again via target disk mode), and were surprised when we were met with the flashing question mark/system folder icon. Sort of left it at that and forgot about it.
    I stumbled upon the Pismo again today and decided to see if I couldn't get it working. After going through a few "why won't this even turn on" sessions (the machine hadn't been powered on in a few years, so pulling the internal battery and resetting the PMU fixed that), I popped the old drive back in and the machine booted just fine. Cloned the original drive (again) using Carbon Copy Cloner via target disk mode to a disk image on my MacBook. Powered it down, put the new (60GB) drive back in the Pismo, cloned the disk image back to the new drive. The data's there, because I can browse it in target disk mode, but I can't boot off the new hard drive. I can't boot off my Tiger install DVD either - the DVD drive spins up and tries to access the disc, but won't boot. I'm going to try and get my hands on the CD version of Tiger to see if there's a difference using that.
    Disk Utility on the MacBook says there's nothing wrong with the Pismo's hard drive, but I'm not convinced that's the case. I'd heard about Pismos being picky with certain types of hard drives, is this true? If not, what other issues might be leading to this behavior?

    Is this perhaps an artifact of the drive being formatted via target disk mode on my MacBook
    I suspect that the problem lies somewhere in that situation. I suggest that you boot from the install disk as I suggested previously and reformat the HDD and reinstall the OS.
    Formatting, Partitioning Erasing a Hard Disk Drive
    Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
    • Boot the MacBook Firewire Target Disk Mode.
    • Insert install disk into MacBook's optical drive.
    • Connect computers via firewire cable
    • Option Boot Pismo.
    • Select Install Disk for startup and click on the straight arrow.
    • Select language
    • Go to the Utilities menu (Tiger and later) Installer menu (Panther & earlier) and launch Disk Utility.
    • Select your HDD (manufacturer ID) in left side bar.
    • Select Partition tab in main panel. (You are about to create a single partition volume.)
    • Click on Options button
    • Select Apple Partition Map (PPC Macs)
    • Click OK
    • Select number of partitions in pull-down menu above Volume diagram.
    (Note 1: One partition is normally preferable for an internal HDD.)
    • Type in name in Name field (usually Macintosh HD)
    • Select Volume Format as Mac OS Extended (Journaled)
    • Click Apply/Partition button at bottom of panel.
    • Select Erase tab
    • Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
    • Check to be sure your Volume Name and Volume Format are correct.
    • Click Erase button
    • Quit Disk Utility.
    Open installer and begin installation process.
    cornelius

  • Windows 8.1 fails to boot with error code 0x5c after moving physical drives

    Hi,
    i just rearranged hard drives on my desktop PC. I removed 4 RAID drives, installed a single drive and reattached all drives into different SATA connectors on the motherboard.
    After this, my PC doesn't boot. IT always fails with errorcode 0x5c. My OS is on SSD drive, which was not part of the RAID drive so it should boot up just fine - except it doesn't.
    I've tried safe mode, I've tried starting with driver signature enforcement disabled - but it never does boot up properly.
    What else do i do apart from reinstalling the OS?

    Hi,
    This error 0x5c indicates that the HAL initialization failed. A hardware abstraction layer (HAL) is an abstraction layer, implemented in software, between the physical hardware of a computer and the software that runs on that computer.
    It seems that the issue can be cause by interface compatible. Please enter BIOS and change SATA to AHCI to see what’s going on.
    Also, I suggest you arrange your 4 RAID drives back to original SATA connector and connect the new single drive to another to check the results.
    Hope this could be helpful.
    Kate Li
    TechNet Community Support

  • CD-ROM error on boot after replacing DVD drive -Qosmio F20-574

    Ok so I have a Toshiba Qosmio F20/574 and I'm trying to replace the factory DVD drive (TEAC DV-W28E) with a Liteon DS-8A1P (f/w CX12). With or without a DVD drive Im getting a CD-ROM error on boot. The only time I do not get it is when I boot with the factory DVD drive.
    Here are the things I've tried...
    -Cleared the CMOS
    -Removed the bezel to make sure its plug all the way in
    -used the EEPROM utility to set the drive to slave.
    -tested the drive in another laptop
    -unistalled the factory dvd drive through device manager and tried to boot with the new dvd drive
    Here are the things I found weird...
    - in the BIOS (ACP BIOS 1.30) under Device I/O it shows the Hard Drive and cd drive but its not listed by name, its showing only the IRQ of the master and secondary IDE controller (Built-in HDD Primary IDE (1F0H/IRQ14), CD-ROM Secondary IDE (170H/IRQ15)). This doesnt change, even if I boot without a DVD-Drive.
    -There is no BIOS update available for this laptop. This is a Toshiba from Japan and Ive tried using Qosmio F20 BIOS 1.40 from another region but it doesnt work.
    -I cant seem to find an update firmware for the Liteon DS-8A1P (CX17)
    I cannot think of anything else to try. I really need help! Any ideas?

    Hello
    your Liteon DS-8A1P (CX17) currently in SLAVE or CABLE SELECT Mode
    you must make it as MASTER
    Toshiba accepts drives in MASTER settings only
    you can not make it by jumper , because there is no jumper inside the drive
    you can make it master by:
    1-firmware update to the drive to make it MASTER.
    2-by soldring pin 47 to pin 45 inside the drive (not recomended).

  • How do I get LR4 to find all photos in catalog after replacing hard drive on mac? question marks all

    I had the hard drive replaced on my mac.  I did a restore from back up drive to my new hard drive.  First LR4 couldn't find the catalog so I pointed to it. Then I opened lightroom 4 and it cannot see ANY of my photos. I don't want to link each folder full of photos it will take hours. Isn't there another way to do this so it finds them all at once?  Photos are still located in the same location on the new hard drive after restore.  Nothing changed except the hard drive.  Thank you!

    I did find something in another post that suggests to go to the top most file in the structure and right click and click on "find missing folder" then you point to that folder and it will find all subfolders and photos.   This really worked well for most of the photos but I have I must have moved at some point that I will have to relocate.  This is good information whether you are working with a Mac or a PC. I think it would work for either.  I hope this helps someone else out there.

  • How to reinstall os x/data after replacing hard drive

    I'm about to replace my hard drive after the original crashed. I have a macbook pro 17" and I have the original backup cd's, also a time machine backup on external hd.I'm installing a 1tb hdd from the 750gb original.
    What is the sequence which I need to follow to restore my OS and data? The original OS is Snow Laopard, the one I ugraded to is Moutain Lion.
    Apart from the sequence will the Ext hd have the operating system backed up on it or do I need to load the original OS disc and then the Apps disc or only the Ext hd backup?
    As I'm replacing my hard drive do I need to format the new drive in disc utilities still, if so how?
    Will I be asked for any passwords?
    Any help appreciated.
    Martyn.

    Install the new HDD in your MBP. 
    Start the MBP with the Snow Leopard install disk holding down the C key.
    Proceed with the installation until you see a menu bar on top of the display. 
    From the menu bar click on UTILITIES.
    From the drop down menu select Disk Utility.
    Select Disk Utility>Erase and format the HDD to Mac OS Extended (Journaled).
    Proceed to install Snow Leopard.  It will probably be 10.6.3.
    Open SOFTWARE UPDATE and install 10.6.8.
    Then you may install Mt. Lion or Mavericks.
    Run Time Machine and install your user data.  Refer to this web site for assistance if need be:
    http://pondini.org/OSX/Home.html
    Ciao.

  • How to reinstall os x 10.7 after replacing hard drive?

    Hi,
    Can anyone tell me how I can reinstall my purchased copy of OS X 10.7 (Lion) to my new hard drive. The hard drive in my imac recently died. I had to replace with a new one. It is currently running on 10.6.8 (snow leopard) because I used the CD to put on the OS after formatting. However, I prior to the dead drive, I purchased a Lion and was running on Lion. My purchase was on line so there is no CD. How can I make this upgrade again? Do I have to pay apple again for Lion?
    Thanks

    You will ultimately have to download it over the Internet.  Or I don't know, you could take your computer to an Apple Store and have them do it.
    http://arstechnica.com/apple/2012/07/how-to-create-a-bootable-backup-mountain-li on-install-disk/

Maybe you are looking for