Error Code -1 Returned by core audio driver-Please help!
I can't open GB3, each time I try, it gives this message error: Error Code -1 Returned by core audio driver
What can I do?
Intel 2.16, OS: Leopard, and I use Guitar Rig 2 which work fine.
There is no such thing as a G5 Intel.
Error -36 is an "I/O error", could mean a lot of things, you should give more details:
• Does this happen during recording or playback?
• Does it happen again if you re-open the project/re-start GB?
• Does it happen with other projects too?
Similar Messages
-
Error Code -36 Returned by core audio driver-Please help!!!!
8:03 into my new song and all of a sudden I get a pop up that says "error code -36 was returned by the core audio driver" I click it off and the track continues to play looping 3 seconds of the same thing over and over again as the track continues over what should be correctly playing.
This is in garageband 08' on an up to date G5 intel with plenty of space and NO locked tracks. I also ran disk utility and nothing has helped.
Any idea what is happening and how to save my song?
Thanks for any help!
Message was edited by: Howard HerrickThere is no such thing as a G5 Intel.
Error -36 is an "I/O error", could mean a lot of things, you should give more details:
• Does this happen during recording or playback?
• Does it happen again if you re-open the project/re-start GB?
• Does it happen with other projects too? -
Error Code 39 returned by core audio driver
Any idea what this is, it doesn't give me any other information. It comes within 2 seconds of playing my audio. I have a lot of stuff on there, but I also have a Big powerful Mac G5. I increased the buffer size, that didn't do anything. It doesn't crash, just won't let me do anything until I press continue, then comes up 2 seconds later.
I have had the same happen to me. I did a search on the forum and the best I could find is that it isn't really listed anywhere what it means.
I think it means that Core Audio needs to catch up. When this happens to me, I just hit return so that it starts playing again from the beginning.
I have to ask, do you have a million (exaggeration) little regions in your Arrange window? Logic doesn't handle all those tiny pieces that well, so if you do you might consider making them into one big region to ease the load on Logic....
Hope that helps, and welcome to the forum.
X -
Error code -1 returned by core audio
hi,
i recently installed the east west symphonic orchestra platinum edition to use with logic pro, and packed 2 GB extra RAM into my power mac g5. however, logic keeps crashing a few minutes into using it, though up until then it seems to work fine. every time, the message 'error code -1 returned by core audio driver' pops up. any ideas why? i am not a huge technophile so any advice in simple terms would be greatly appreciated...
cheers,
alastairTry uninstalling 'battery' (I'm unfamiliar with that plug-in) & seeing if you still get error messages. If not, re-install 'battery'; but if the errors recur, you'll have to remove it again.
N.B.: check the installation instructions first; manually removing the obvious components may not be sufficient (you may need to run the installer & select 'uninstall'). -
Error code -1 was returned by core audio driver
Hello everyone,i have logic pro 7 fully registered and all of a sudden when i try and open any of my songs i get an error message.error -1 was returned by core audio driver?and battery is the only plug-in that has a line through it and it will not open?i rebooted,even tried to open a brand new autoload and everytime i try to load in battery i get the same error message?If anyone has a clue,cause i dont
Try uninstalling 'battery' (I'm unfamiliar with that plug-in) & seeing if you still get error messages. If not, re-install 'battery'; but if the errors recur, you'll have to remove it again.
N.B.: check the installation instructions first; manually removing the obvious components may not be sufficient (you may need to run the installer & select 'uninstall'). -
Error Code -39 was returned by core audio driver
Error Code -39 was returned by core audio driver.
Does anyone know what that message means?
Thanks.When did you see it?
(It's an EOF error) -
Error - 5000 was returned by the audio driver
Out of nowhere I'm being constantly plagued by this annoying message in Logic 8.0.2 I haven't change anything in the past 2 weeks and was working fine all day yesterday.
Error - 5000 was returned by the audio driver. pops up and I have to clear it or I can't access the session. This has brought work to a standstill...
I've tried clearing out all the caches, disabling all background apps, repairing permissions, turned on the I/O buffer safety... nothing has helped. The only thing I haven't tried at this point is switching out to another interface...
System info
OS X 10.5.4
MacBook Pro 2.16 intel core 2 duo
3GB Ram
Apogee Rosetta 800 interface
thanks,
bdThanks for the responses guys.
The session is huge, and I called Apogee, at first we thought it might be a 3rd party plug-in. It's not...
I eventually noticed it happens in only certain sections of the song, and hadn't noticed there is a crash cymbal I pulled in which is playing from the server. I had logic copy the file to the local drive and now we're all good... Thankfully so too!
Funny thing is, This session has been playing fine with the file from the server for months. Also, all the permissions for the folders and files where the sample is are all set to read/write... <shrug> And why would this return an Audio Driver error? More apple permissions weirdness...
But at least it's fixed, Thanks for the help guys. -
My iphone 5c stuck in safe mode with error code (1) cannot restore? Anyone help please ?!?
go on the internet and type in find my iphone 5c but then once you have done that type in your apple ID then take it out of recovery mode hopefully that should work
-
Hey there, im having problems emptying the trash on my macbookpro and I wonder is it the problem that slows down my computer too because it has been awhile since i have emptied my trash and now I can't empty it due to the error showed as "PodcastsPlacord.nib Error Code -36".
Does anyone has any idea on how to get this done? Please Help.....Thanks !!!Hi Alene!
Do you make regularly house keeping of your system? Repair the permissions and stuff like that. If not repair first your permissions:
http://support.apple.com/kb/ht1452
Or download a Utility called Onyx and do your house keeping.
How many space is left on your HD? Which OS you are runnning?
If you have done all this, and you are still unable to empty your Trash, I will tell you, how to do this with a Terminal command ...
marek -
Error code -50 was returned by the core audio driver. Help anyone?
When I open Virus Powercore I get the error message, this only happens with Virus Powercore. The other thing that happens is that the user interface from Virus displays only with the controls not with the editor that will give you the original user interface. Can anybody please tell me what this error message is becuase I can't find it any where.
Dual G5 1.8Ghz Mac OS X (10.4.9)I just did a search using "search discussions" using the term:
"-50"
(use the quotes, because they're important when doing this kind of search)
It returned a lot of hits, and apparently you're not alone in wondering what this error means. Lots of people reporting it as an error in iTunes, and also something related to 10.4.9. But in the event no one here answers your question, I suggest you do the search yourself, slog through the results, and see if anyone's come up with an explanation that fits your scenario. -
Why can't Apple build a network product that is as easy to setup and configure as EVERYONE else?
I decided to cave in and get the Airport Extreme, knowing how bad Apple executes on anything other than a MacBook. And sure enough I was not let down.
I plugged in the Airport Extreme and went through the efforts to configure it. While configuring it, I did not use the manual setup (which I should have). It only asked for the DNS settings and nothing else like the gateway and network mask from my ISP provider. Now, it is hosed.
1. I am using the Airport Utility software that came with the product.
2. I have held the reset button in and watched the sudden flashing of the amber lights.
3. I have power cycled the devide
AND NOTHING! Argh - why did I spend so much money on such a piece of crap.
I would be so grateful if anyone can help me. This is so frustrating.
DELL Latitude 820 Windows XP Pro Intel Core 2 Duo with 4GB Ramyou can check the hardware capability of the treo 650 especially the charger port and the battery itself.
if you know someone that has a 650 or another charger that is the same as you, try to borrow it and test your phone if it will charge unto it.
you can also try another battery if it will resolve the issue. if none of those things can help it fix the issue, then it's time for you to have the phone repaired.
Post relates to: Treo 680 (Unlocked GSM) -
"error code -1 was returned by the core audio driver" battery multi?
working on a track with NI's battery 3 loaded as a multi, eveyrthings fine. next day come to open the project and i get the following message:
"error code -1 was returned by the core audio driver"
everything is fine with the project except that in the channel where battery is loaded, the plugin name (where you insert the plugins) has a line strike through it, and the GUI wont open when you double click it?
i tried re-loading the plugin as a multi instrument but get the same error message, but it loads fine as just a stereo or mono plugin.
any ideas??
thanks in advance.I just did a search using "search discussions" using the term:
"-50"
(use the quotes, because they're important when doing this kind of search)
It returned a lot of hits, and apparently you're not alone in wondering what this error means. Lots of people reporting it as an error in iTunes, and also something related to 10.4.9. But in the event no one here answers your question, I suggest you do the search yourself, slog through the results, and see if anyone's come up with an explanation that fits your scenario. -
Error code -36 was returned by the Core Audio driver.
Hi; am receiving this error...
Error code -36 was returned by the Core Audio driver.
...but am not finding any info about it or how to fix/update the driver. Anyone have this error before?
thanks, CharlieThere is no such thing as a G5 Intel.
Error -36 is an "I/O error", could mean a lot of things, you should give more details:
• Does this happen during recording or playback?
• Does it happen again if you re-open the project/re-start GB?
• Does it happen with other projects too? -
Error code 25974 was returned by the core audio driver?
hello, well ive been having a problem trying to record one of my dj sets directly from my mixer.
This is my set up: My dj equipment is conected via my mixer to an m-audio ozone midi keyboard (1 stereo in 1/4 TRS jack), this keyboard is connected via usb to my computer (imac g4), and im using logic express 7.0.1 as my recording software.
When i start recording, everything is working ok, i can see the signal on my
m-audio keyboard, and i can see the signal on logic, on one of the audio tracks.
But then, logic gives me an error message:
"error code 25974 was returned by the core audio driver."
and then the signal goes out, and i cant finish my recording session. The portion of the recorded set until the error, is perfect, but i need to be able to record the whole session.
i hope i made my self clear. any help!!! thanks a lot
Imac G4 Mac OS X (10.4.4) 1 g ramI just did a search using "search discussions" using the term:
"-50"
(use the quotes, because they're important when doing this kind of search)
It returned a lot of hits, and apparently you're not alone in wondering what this error means. Lots of people reporting it as an error in iTunes, and also something related to 10.4.9. But in the event no one here answers your question, I suggest you do the search yourself, slog through the results, and see if anyone's come up with an explanation that fits your scenario. -
Error Code 25974 was returned by the Audio Driver - Logic/MBOX
Hi,
I know this question has been asked before but could not find a resolution to this problem.
I'm using a MacBook Pro (15-inch, Mid 2012) with a 2.3 GHz Intel Core i7 processor, using OS X Mountain Lion (10.8.2) and running Logic Pro 9.
I've been using the AVID MBOX interface for some time now and it hasn't failed me yet, but today I received the error message 'Error Code 25974 was returned by the Audio Driver' when selecting it as the input/output device.
I'm not sure why this is now happening as the interface drivers are up to date and as I said, it was working earlier in the week when I last used it.
Any help would be greatly appreciated.Bump,
This is only happening with one particular project ... I imagine it could have become corrupted somehow, yet I can still work on the project and edit it. I just can't bounce it! Any ideas as to what I can do?
Maybe you are looking for
-
Printing pdf files from commandline located on intranet ?
Hi, i'm able to print files from the commandline which are located on the file server using : acroRd32.exe /h /p file.pdf Now i want to print a pdf file which is located on the intranet , f.i. http://localhost/b.pdf . How can i do this ?? Regards Erw
-
Difference Between G/L View and Entry View in New G/L Accounting
Hi, Can anyone tell me the difference between the G/L View and Entry View in New G/L Accounting as we are upgrading from 4.7 to 6.0.
-
Hey all. I'm new here as you can probably already tell. I was wondering if there is a BIOS that my computer will accept? I currently have the v1.2 (Just built this rig last weekend). Now, I'm new to all this stuff nowadays. It's been over 7 years s
-
PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I ge
-
Hi I have maximized the window clicking the upper right side button and now I can´t redim it. Always open maximized Any idea??? Regards