ERROR CODE -1 was returned by the CoreAudio driver? help!!

Just been using my Mac and noticed that i get this crash :
"ERROR CODE -1 was returned by the CoreAudio driver"
The it says "The application logic Pro quit unexpectedly" ?
Am running Logic pro 7.1.1 on a 2Gb G5 2.3 Dual Core Mac with a MOTU 828mk2 - is this crash to do with the MOTU?
Secondly is anyone else using Kontakt 2.02 with Logic on a Mac? It seems a bit unstable and it doesnt trigger loops on the 1st beat of the bar of a sequence? Any ideas??
Apple G5   Mac OS X (10.4.5)   2Gb Ram, Logic 7.1.1, PTLE 7.0, 20" Cinema Display,

it could be the Motu driver if you have not updated it since upgrading to Tiger. here is a link
http://lasso.motu.com/downloads/filelist.lasso?&-Database=downloads&-Table=dldb&-Op=cn&product=firewireaudio&-Op=cn&platform=macx&-sortfield=date&-sortorder=descending&-search

Similar Messages

  • "Error Code 25974 was returned by the CoreAudio Driver" HELP

    hi, i have a mac G4 powerbook 512 ram, 60g hard drive, 1.5 Ghz processor and i'm running garage band. i'm trying to do some recording with a Tascam US-122 USB audio/midi interface. and first of all! i'm a little confused as to get the sound to go through to my computer, it can't possibly just travel through the USB ... can it? and when i try to record or play pretty much ANYTHING in garage band (even without the interface) i get this error. and no sounds play over the speakers when garage band is open... it's freaking frusterating! can you help?

    it can't possibly just travel through the USB ... can it?
    Yes, that's how a digital interface works. It converts the analogue signal to digital and sends it across the USB bus.
    As to your error, I've never seen it and was unable to find it in any of my references. Typical things to try:
    o Repair permissions
    o log out and back in.
    o Try logging in as a new User
    o Search your hard drive for "GarageBand" and delete the ".plist" and ".cs" files
    Let us know if any of these things help.
    --HangTime [Will Compute for Food] B-|>

  • Help?!  "Error Code -1 was returned by the CoreAudio driver" issue!

    Hello all,
    I am having a problem with Logic Express. Certain song files (not all) will not open. I get the "Error Code -1 was returned by the CoreAudio driver" dialog box, then Logic Express crashes.
    I don't want to lose any of these songs.
    Here is the pertinent info for diagnostics:
    System:
    MacBook Pro 2.0ghz Core Duo
    2 GB RAM
    10.4.11
    Logic Express (Academic) 7.2.3
    Line 6 Toneport UX2 as soundcard (just loaded most recent driver)
    3rd Party Plug-ins:
    PSP Vintage Warmer 2 & 3
    NI Guitar Rig 2 & 3
    (both worked fine previously)
    Additional information:
    About a year ago I obtained a six month demo of Logic Pro (with an XKey dongle). The time has expired but I haven't gone through my system to delete everything from the Logic Pro install (and didn't want to accidentally toss out something Logic Express might need).
    I ran searches here on this forum and Google and did not find any workable solutions.
    HELP?!

    Strange. I just went into the Library/Audio/Plug-ins/Components folder and thew out the older versions of VW and GR (as listed above) plus an old demo of Amplitude that I never ended up using. Now the files seem to be opening up. Does anyone have an explanation so I might understand just what happened?

  • 'Error code -1 was returned by the CoreAudio driver'

    Hi
    When launching a lot of songs, i get this error popping up once, twice, or sometimes three times. Usually when an exs24 patch is loading - not sure if that is relevant.
    Any idea why? I've done a search but to no avail.
    OS x 10.4.2, motu 828mk2, logic pro 7.1.1
    Thanks
    Eddie

    Hi Beatsmith,
    search for "error code -1" this will lead you to a thread, where this was already discussed earlier
    Thomas

  • "Error code -38 was returned by the Audio driver" - Help!

    Hi All,
    I am seeing this error when I play a project. The project keeps playing but the error is modal, so I can't "do" anything until I dismiss it. It pops up a different times when playing this one project. Not always at the same place but reliably every time (more than once) that this file is played. I have never seen it before.
    Any Ideas?
    I'm running on a new-ish MBP with a Pod XT as my audio card. Neither my CPU nor HD meters are maxing in this 20 track file.
    What is different to normal? I have just installed NI Komplete but none of their plug are instantiated in this project. I have a couple of missing audio files which give errors when I open the project. I have a missing Hybrid Bas plug-in.
    Any help appreciated.
    Thanks.
    Matt.

    it could be the Motu driver if you have not updated it since upgrading to Tiger. here is a link
    http://lasso.motu.com/downloads/filelist.lasso?&-Database=downloads&-Table=dldb&-Op=cn&product=firewireaudio&-Op=cn&platform=macx&-sortfield=date&-sortorder=descending&-search

  • Error Code -2 was returned by the CoreAudio driver

    Whenever I try to start garageband I get this. It still loads but then I don't get any sound at all.
    Ideas?
    Cheers

    Marcus and Bob, this was answered last week. Try a search before posting. In your GB preferences, go to the Audio/Midi preference and you will find that the I/O prefrences are unselected: choose "Built-in Audio" and restart GB.

  • Error code -36 was returned by the CoreAudio driver

    i have 4 plug-ins and this is what i get. what does this mean to you?
    G4 powerbook, macbook pro 2ghz   Mac OS X (10.4.7)  

    Multimeter, multipres, LinphaseE and adaptive limiter. that's all i got and 1 audio track. was trying to mix my song and suddenly this message pops up...thanks...
    no 3rd party plug-ins...
    G4 powerbook, macbook pro 2ghz   Mac OS X (10.4.7)  

  • Error code 28773 was returned by the CoreAudio driver

    How do I fix this problem?
    Anybody?

    Sorry, not being funny, to get rid of this problem, get rid of Digidesign. That is all I have been able to discover.
    Imran

  • Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

    Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

    Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

  • Error code 1 was returned by the audio driver :(  randomly!

    hey all! ive been getting this messege "error code 1 was returned by the audio driver" almost every time i try and merge tracks, bounce track in place, bounce region in place, or mixdown stereo regions per tracks. NOT when i do a real song bounce though. i feel like im noticing my computer is taking a long time to copy audio files into logic projects...i dont know if they are related though. but this error code 1 thing has been hapening CONSTANTLY. the thing is...nothing has changed. i havnt installed or changed anything on my system. its happening on ALL of my old projects, and MOST of my new ones. ive tried disabling all third party AUs and it still happens. do i have bad ram? a bad drive? do i need to reinstall everything? thanks so much in advance!

    Ok, I don't know if this solves your problem... but as for what was triggering the 'Error code 1' message on my computer... Here's the update.
    After much troubleshooting, the cause of this error in my setup was the Highpoint RocketRaid 2314 eSata PCIe card.
    The Highpoint RocketRaid driver is included in OS X 10.8 with no additional drivers / installers to run. However, it isn't compatible with the old driver when upgrading the kernel (ie. 10.6 - 10.8)
    I was bouncing to an external drive connected through eSata to the RocketRaid PCIe card... error message. Time Machine backup connected through eSata... error message. The drives were being dismounted rudely, or losing connection momentarily and reconnecting, resulting in the error messages.
    Here are the instructions from Highpoint tech support to manually uninstall the embedded driver, and then reinstall the old Snow Leopard driver for use in Mountain Lion (10.8)... which works as it's suppposed to.
    1.  Go the folder System > Library > Extensions >, look for the file HighPointRR.kext and delete that file.
    2.  Second, download the driver from the link below, then run the Un-install script to remove any previous installed driver.
    http://www.hptmac.com/productfiles/bios_driver/hptrr-mac106-driver-v11...
    Then re-install the driver, but do not reboot or restart the system.
    3.  Third, download the webGUI from the link below. And run the un-install script to remove any previous installed web GUI.
    http://www.hptmac.com/productfiles/WebGUI-Mac-v168-091120.dmg
    Then re-install the web GUI and reboot after installation is complete.
    Once the system has booted up, open a browser and type URL to log into web GUI.
    http://localhost:7402
    User Name: RAID
    Password: hpt
    I hope that this helps someone!

  • Error Code 1 was returned by the Audio driver

    Whenever I try to export a podcast to MP3 - using good quality, I get multiple errors. A little box pops up saying "Error Code 1 was returned by the Audio driver".
    In the saved file there is a short one second pause wherever that particular error has shown up.
    Has anyone experienced this error and knows of a solution? I am utterly clueless, not very experienced with Garageband at all...
    Thank you in advance!

    I'm getting this too, for the first time. I've got a project that I've used to publish a monthly podcast with and I've been opening, editing, and saving this project for a couple of years now.
    Now, with GB '09, I'm getting this error. Not pleased.

  • Every time i launch garageband i get this message "Error code 28773 was returned by the Audio driver."

    HI. I just got a new macbook pro 15".
    every time i launch garageband i get this message
    "Error code 28773 was returned by the Audio driver."
    when i hit record, the shaded area in GB starts to advance, but it doesn't record any sound, and when i hit the space bar, the recorded area disappears.
    anyone know how to fix this?
    I have installed BOOM, but i think that's the only extra sound software i have.]
    PLEASE HELP!
    thanks,
    mojoman22

    Please read this whole message carefully, especially the warnings, before doing anything.
    1. The changes to your configuration suggested here should be considered provisional; they may not solve your problem, or they may remove functionality that you find useful. If a third-party system modification that you want to keep is causing the problem, seek help from its developer.
    2. WARNING: Back up all data now if you haven’t already done so. Before proceeding, you must be sure you can restore your system to its present state, even if it becomes unbootable. If you’re not sure you can do that, STOP — DON’T CHANGE ANYTHING. If you’re dissatisfied with the results of the procedure suggested below, restore from your backup. I will not be responsible for the consequences, and I will not be able to help, if you ignore this warning.
    3. You should either remove or update the following system modification(s), if an update is available from the developer:
    Parallels
    and definitely remove at least the following:
    Boom
    † MacKeeper
    † VirusBarrier
    4. Whatever you remove must be removed completely, and (unless otherwise specified in this message) the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job. I can't be more specific, because I don't install such things myself. Please do your own research.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
    Again, please don't ask me to do this research for you. You can do it better than I can, because I haven't installed the product and I may not even know what it is.
    If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.
    5. I recommend that you never reinstall the modifications marked with a dagger (†) above, if any. If your problem is resolved after uninstalling all the above modifications and rebooting, but you still want to use some of those not marked with a dagger, you can experiment with putting them back, one at a time, testing carefully after each step. Keep in mind that system modifications may be incompatible with each other or with future OS X updates, so it may not be clear which one is at fault.
    6. If you still have problems after making the suggested changes and rebooting, post again. Remember: if you don’t like the results of this procedure, you can undo it by restoring from the last backup you made before you started.
    Remove the "MacKeeper" crapware as follows.
    Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions, nor do I intend to repeat the test.
    IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
    In the Finder, select Go ▹ Applications from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. A dialog will pop up asking why you want to uninstall it. You don't have to provide that information. Enter anything you like in the text box, then click the Uninstall button. All the functional components of the software will be deleted. That's the only useful feature of "MacKeeper:" it deletes itself. Reboot.
    Do not try to uninstall by dragging the MacKeeper icon in the Dock or the LaunchPad to the Trash.
    Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cleaners,” “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this kind of material is useless, or worse than useless.
    The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
    The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it.

  • Error code 28773 was returned by the Audio driver.

    After the Mountain Lion update on my mac, whenever I launch the GarageBand'09, I experience this Error Message : Error code 28773 was returned by the Audio driver.
    It only has Continue as an option, so, I click on this "Continue" option, click on "Loop" option, click on any sound, for example Bass then click anything under the Bass option, this same error message pops up.
    Please, someone help me out.
    This is my email : [email protected] if you want to reach me via email.

    Do you have any device drivers installed, for example Digi Design Audio Interface?
    Make sure you have the latest versions of all audio drivers; you need sandboxed, 64-bit versions to run with Mountain Lion. Look at the web site of the manufacturer of your interface if there are newer drivers.
    Regards
    Léonie

  • Error Code 25974 was returned by the Audio Driver - Logic/MBOX

    Hi,
    I know this question has been asked before but could not find a resolution to this problem.
    I'm using a MacBook Pro (15-inch, Mid 2012) with a 2.3 GHz Intel Core i7 processor, using OS X Mountain Lion (10.8.2) and running Logic Pro 9.
    I've been using the AVID MBOX interface for some time now and it hasn't failed me yet, but today I received the error message 'Error Code 25974 was returned by the Audio Driver' when selecting it as the input/output device.
    I'm not sure why this is now happening as the interface drivers are up to date and as I said, it was working earlier in the week when I last used it.
    Any help would be greatly appreciated.

    Bump,
    This is only happening with one particular project ... I imagine it could have become corrupted somehow, yet I can still work on the project and edit it. I just can't bounce it! Any ideas as to what I can do?

  • Error code -36 was returned by the audio driver !!!

    Any clues to what this message has to say ?

    according to MacPilot 3.0.8:
    error -36 ioErr. OI error (bummers)
    try adjusting all sound buffer sizes in both the System and Logic.
    try forcequitting coreaudio in ActivityMonitor.
    reinstall OS X and Logic.
    And next time, please try to be a bit more specific about the circumstances, your setup and what you have tried yourself.
    Good luck, Erik.

Maybe you are looking for