Error code 10007 with biobench 1.2 and PCMCIA DAQ-1200

Trying to use Biobench 1.2 in conjunction with a PCMCIA 1200 DAQ card. Like previously reported this becomes a problem when trying to record from more than one analogue input. However, I don't understand the previusly documented solution: how in biobench do you ammend the scan order of the channels to overcome this problem.

Greetings,
To amend the scan order, you should do the following:
Navigate to Configure >> Settings. On the Timing tab, select channels 6, 4, 2, and 0 from the Scan List. Then, on the main screen, modify the displayed graphs so that channel 6 is the topmost, followed by channel 4, channel 2, and finally channel 0 on the bottom. You can change which channel is associated with a particular graph by pressing the down-arrow in the upper left-hand corner. The scan order should now be appropriate for your PCMCIA-1200.
Good luck with your application.
Spencer S.

Similar Messages

  • Help! error code 8 with Adobe premier cs4 and OpenGl

    hey there,
    i've been trying to work with adobe premier cs4 on my new Thinkpad w520 (i7 2720, 8GB, Nvidia quadro 1000m)
    i keep getting this error messege regarding the OpenGl (error code #8) that lost connection with the display driver, after that its automaticly shutting down premier.
    nvidia representive suggested me to download an old driver (268.71) instead of the latest one, still wouldn't solve the problam.
    can anyone help me with that issue!?
    jonny

    hey jonygeron,
    if you uninstall the current graphic driver , let windows install its generic driver .. can you get Premier CS4 to work ?
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • I have an MX722, with error code 6000. Have powered down and unplugged. code won't clear. what now?

    I have an MX722, with error code 6000. Have powered down and unplugged. code won't clear. what now?

    Hi jactoday,
    To try and resolve the issue, you will want to ensure that there are no obstructions in the printer that may be causing the error. To do this, please follow the steps located here.  If you still receive the error, the printer will require servicing.  Please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • What are the meanings of Apple Hardware Test error codes 4m0t/4/40000003:hdd-1300 and 4m0t/4/40000003:hdd-1308?

    what are the meanings of Apple Hardware Test error codes 4m0t/4/40000003:hdd-1300 and 4m0t/4/40000003:hdd-1308?

    Thanks - Even though I'm years out of warranty I got chat help from Apple (I said they should help me since the codes aren't published.)  We covered three different questions, and although I didn't get a specific decoding of the error code, I got confirmation of what other comments here imply - it might have helped that I indicated I'd already been here - and useful links to how to do back ups, including to CD(s). (I don't have a lot of data on this computer yet)
    Now I need to figure out how to decide how hot-to-the-touch is "too hot" for the metal frame at the top of the iMac to decide whether I'm getting adequate fan performance or insufficient.  While chatting I initially reported it was cool at the bottom and warm at the top.  Apple hadn't asked, but their response prompted me to feel it again, and I'd say the top was hot, not warm - I updated but Apple didn't comment further except to conclude after addressing the other questions that I should take it in for further assessment - don't really want to bother with that.

  • I keep getting error code 3 with a fresh sync using AUSST. Help please.

    The tool tells me the folder exists at the given path, so i'm using the command correctly.
    It's a Windows server, the path is not local to the server, but is set up as the host folder in IIS 7. I can access the website i created for this, and can see the "updates" and further folders that i have created.
    I get error code 3 when trying to synchronise, and all it does is delete the folder specified as root.
    I run the command like this:
    adobeupdateserversetuptool.exe --root="\\server\share\adobe\updates\cc"
    then choose option 1 on the menu, which is "fresh synchronisation".
    Your choice: 1
    Fresh Synchronization chosen.
    Folder exists at given root path! All the contents of the folder will be deleted
    Enter 'Y' to continue or any other key to exit: y
    Could not access the specified path.
    AdobeUpdateServerSetupTool returned with code: 3.
    "everyone" and "domain computers" has been granted full access to the folder in question, and security inheritance is on.
    Any ideas?

    I have got past the error code 3, but now I get error code 4...

  • Error code 147;20 what is it and how to fix thanks

    error code 147:20 what is it and how to fix it--thanks

    Mylenium has the information on this:
    130 :: XX through 150 :: XX errors are related to the install database and licensing sub-system. It thinks the install never finished and the licensing does not kick in. Uninstall, run the CC-CS Clean Utility. When you re-install, make sure to correctly run with full administrative privileges. And by all means - make sure your system is on the latest system updates.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • TS3694 when restoring my iphone i get an error code of 1015 , why is this and how do i restore my phone as now its stuck in recovery mode ?

    when restoring my iphone i get an error code of 1015 , why is this and how do i restore my phone as now its stuck in recovery mode ?

    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • Repeatedly, this error code suddenly appears on the screen and I don't have a clue what it means or what to do:  "A script in this movie is causing Adobe Flash Player to run slowly.  If it continues to run, your computer may become unresponsive.  Do you w

    Repeatedly, this error code suddenly appears on the screen and I don't have a clue what it means or what to do:  "A script in this movie is causing Adobe Flash Player to run slowly.  If it continues to run, your computer may become unresponsive.  Do you want to abort the script?
                                             No     Yes"

    Hi,
    Some "movies' are actually Flash files.
    This means the Flash App will play them (possibly in a browser in some cases).
    Depending where this item is and how it is playing it may be effected by other things
    A web page can include javascript.
    Apple uses javascript here to help with creating the posting box, the Edit options, Adding pics/smilies and the like.
    Sometimes the javascript can be what is called a runaway process and gets sort of stuck in an endless loop.
    If it is a free standing item then it might be triggered by AppleScript on the Mac. (or be modified in some way)
    Again if the Script (normally written with a upper case S) is not perfect it can cause problems.
    9:09 pm      Wednesday; February 26, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • I get error code -8058 when attempting to copy and paste in Finder, I get error code -8058 when attempting to copy and paste in Finder

    I get "error code -8058" when attempting to copy and paste in Finder, I get error code -8058 when attempting to copy and paste in Finder. "Alt +Drag" works. Any ideas?

    Have a look at the 'More Like This' to the right - seem to be some solutions offered: >>>>>>>>>>>>>>>>>

  • "error code-39 with core audio driver"

    so I have a 75 minute continuous dj mix I recorded onto garageband... after having recorded this I then converted the file from a 120bpm to a 60bpm speed so as to fit it all in... now, however, towards the end (between 65-70 minutes into it) the mix suddenly is interuppted by a crude digital-type sound. a pop up then says "error code-39 with or in core audio driver"....
    what gives here?
    I'd appreciate any help you can give.
    peace.

    does this mean I have to re-record the audio file?
    Probably. I guess you could try a commercial disc repair program like TechTool Pro or Disk Warrior, but odds are if the file system can't figure out where the end of file is, the file is hosed --Hang B-(>

  • When attempting a restore from Time Machine I get error code -8004. What is this and how can I correct it?  Thanks

    when attempting a restore from Time Machine I get error code -8004. What is this and how can I correct it?  I use OX 10.9.3
    Thanks

    Run it in compatibility mode and input the credentials.
    Mylenium

  • I submitted my podcast and I got an email saying error, I checked with the feed validator and got this message: This feed does not validate. line 40, column 6: Undefined item element: itunes:order, how do sort this out, someone help me please.

    I submitted my podcast and I got an email saying error, I checked with the feed validator and got this message: This feed does not validate. line 40, column 6: Undefined item element: itunes:order, how do sort this out, someone help me please.

    Ignore it. 'itunes:order' is a recent addition which FeedValidator doesn't know about. If your podcast is rejected that is unlikely to be the reason. Of course as you haven't posted the feed URL nor the text of the error message I can't make any further comment.

  • LoadLibrary fails with error code 5 after cloning project files and cws to another directory.

    I have a project that communicates to an instrument over a USB UART.   The telemetry packets from the instrument are defined in DLL's which the main application loads using LoadLibrary with a relative path input.  The plugin DLL's are two directories below the application executable  All has been working fine for months untill I needed to clone the project (using Hg).  The cloned project will no longer load the DLL's.  The DLL's are not corrupted as I can hard code their paths in my original project to them and load them just fine.  The cloned project finds the files (using GetFirstFile), so I know that the path string is corect, but is unable to load the DLL's using LoadLibrary.  The returned error code is 5.  Has anybody seen similar behavior when trying to copy or clone a project?
    Thanks for any help you can give!
    Solved!
    Go to Solution.

    When moving or copying projects from one location to another I simply copy the entire folder+subfolders and never had problems: CVI warns that paths need to be fixed al corrects everything by itself. Nevertheless, error 5 should be "Access denied" so you could check properties and security of the cloned files in order to guarantee that your code can access them properly.
    Alternatively, couldn't you place the DLLs in some of the standard search-paths? This will avoid problems in cases like yours.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • HP Touchsmart with a BIOHD - 8 error code. What does it mean and what can I do?

    Computer keeps crashing.  Ran diagnostics and it came up with the error code BIOHD -8 for the hard drive.  What do I do?

    Here are the specs and ordering options for your HP TouchSmart IQ526t CTO Desktop Computer. Since this is a configure-to-order model, I have no way of knowing the size of the hard drive in your computer. Please post the size of the hard drive shown on your order slip or in Windows. Sizes available for ordering were;
    320 GB 7200 rpm SATA 3G (3.0 Gb/sec)
    500 GB 7200 rpm SATA 3G (3.0 Gb/sec)
    640 GB 7200 rpm SATA 3G (3.0 Gb/sec)
    750 GB 7200 rpm SATA 3G (3.0 Gb/sec)
    1 TB 5400 rpm SATA 3G (3.0 Gb/sec)
    Here are some detailed instructions on Replacing the Hard Drive in your IQ526T.
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Error code 43 with message 'one of the USB device attached to this computer has malfunctioned, and Windows does not recognise it'.

    i have suddenly got this message 'one of the USB device attached to this computer has malfunctioned, and Windows does not recognise it'. it says error code 43. the usb drives (2 in no.) have stopped working as in they dont recognise the external hard drive
    or pen drive.  I have a HP pavilion dv4 series notebook.  the usb drives were working fine - however suddenly yesterday this strange message cropped up. life has taken a drastic turn! please help.
    in device status is says:  Windows has stopped this device because it has reported problems. (Code 43)
    location: Port_#0002.Hub_#0005
    driver provider:  microsoft
    date of driver: 21-06-2006
    driver version: 6.1.7600.16385
    HELP!!!!!!!!!!!

    Hi ameet2005,
    Please check if the following suggestions help:
    First, please disconnect all USB devices and then perform the following steps:
    1. Click "Start" button, type “devmgmt.msc” (without quotation marks) in the “Search” bar and press "Enter". Click “Continue”
    if necessary.
    2. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
    3. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
    Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
    If the issue persists, please check if it can be resolved by running
    System File Checker.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Maybe you are looking for

  • HOW TO USE A MICROSOFT DYNAMIC LIBRARY ON ABAP

    I want to know how to use and implement a call to a dll from ABAP because in my job i need to impress data using a neumatic printer;  the model is CN101 from Technifor. Thanks

  • How to get the Newly added fileds from Oracle to BW

    Hi , We have created the view in the DB side and extracted the data to BW side. After that in the DB side they have added new filed. I want to extract the data for that filed also. But that filed is not displaying in the data source itself. We have d

  • WLC 5508 , AP client dhcp address different from WLAN interface VLAN subnet?

    Hope the title makes sense, here's my situation: I have multiple businesses on 1 WLC 5508, there's a LAG to my core switch with seperate interfaces for each, broken up by vlans. My question is: if i have a WLAN setup to use interface "Company A" whic

  • XMLsocket and java server

    Hi I would like to developp a client which connects on a java server. When i run my program on my developement computer, it works (maybe because the server and the flex application are on the same machine.) But when i want to run the flex application

  • Scan error message and unable to perform system restore.

    During a virus scan with Avira I get the following message and the scan cannot be completed; "The exception unknown software exception (0xc0000409) occurred in the application at location 0x0042ff93. Click OK to terminate the program." This has only