Error code 1014:1014

With windows 8.1, and internet explorer 11.0, and adobe reader version 11. I get the error "there is a problem with adobe acrobat/reader if it is running please exit, and try again
1014:1014:
In searching this error the suggested fixes are apply a patch, use adobe eraser and uninstall and reinstall the latest version. I have done both, and they have not solved the issue.
The other suggestion is to edit the register which I would prefer not to do.
Does anyone have a fix other than editing the registry?
The issue is only with explorer as acrobat opens with Firefox.

Hi flybynight1,
Are you still facing this issue?
What is your workflow? Have you tried to open pdf in different browser.
Is your computer connected to certain network Business/office network?
Regards,
Ajlan Huda.

Similar Messages

  • 1014:1014: error I keep getting when trying to open PDF document from online source.

    need help trying to resolve 1014:1014 error when I open online PDF documents

    Hi Christoph,
    The problem is elsewhere, I asked the user to log in at a different workstation and she is able to display documents from SAP at another PC. So the problem is not in SAP but either with the SAPGUI or in Windows...
    I requested a SAPGUI reinstall, we'll see whether that solves the problem.
    But it is certainly not related to DMS.
    Thanks,
    Krisz

  • Adobe Reader 11.0.6 Error 1014:1014

    We have replaced the computer that was having this Error 1014:1014 with a new computer . Now with the new PC it has seen the same error with adobe reader . Its running windows 7 Pro 64-bit
    Fresh install of windows 7 pro . What is the cause of this issue ? I have just tried using Adobe Reader 9 to see if the error follows . Any suggestions are appreciated .

    Try using the latest Reader version 11.0.7.

  • Adobe Errors 1014:1014 and 507:507

    Today we had users upgrade to Adobe Reader 10.1.4
    and cleaned their registry.
    After sometime of processing, we saw the original Adobe error -- 1014:1014
    Tried to close and open workitems again, but the doc would not display. After a couple of times, the Adobe error changed to the 507:507 error (see screenshot below) .
    Note: We were able to view a pdf via Adobe Reader and IE (outside of Netx360).
    Logout/Login to Netx360 clears the issue for another couple of hours.
    Why would our users keep getting these errors?

    Try the Acrobat and Reader Cleaner tool. Then re-install.
    http://labs.adobe.com/downloads/acrobatcleaner.html

  • IPhone will not update (error code 1) will not restore even in DFU mode (error code 1)

    I bought the iPhone 4S from a friend, and I came to wiping it manually from the handset, no problems found however during the initial steps the iPhone was unable to validate on the apple servers (with the carrier stuck on searching). So, I plugged the phone into my trusty laptop installed Itunes fresh and proceeded to restore. The process gets to the later part of the validation and throws up an Error Code 1.
    I'm aware (from searches across the internet) that error code 1 is typically found in phones with tampered hardware/software e.g. Jailbreak, unlock etc. My friend is not tech savvy and doesnt have a clue about these things so I'm sure the phone is 'as is'.
    So i proceeded to troubleshoot the issue:
    I edited my hosts file to point to the apple validation server (and checked it allowed connections to gs.apple.com within my browser - successful).
    Now as the handset is stuck in recovery mode (with the usb and apple logo) I tried to restore via regular Recovery mode - no sucess (error 1)
    Entered the phone into DFU mode (which, in essence ALL of google preaches is the way to restore regardless of issue) same error occurred.
    So i looked into 3rd party applications that could force it to restore or perhaps allow a functional end product.
    Redsnow (latest edition only provides restore for up to iOS 6.1.somethingorother) that produced a dead end.
    Pangu restore facility (latest edition for iOS 7/some 8 models) hanged at the same place as the apple loader.
    I've tried flushing my DNS cache, and verified the Date/time on my computer and router is correct.
    I refuse to accept the phone is nonfunctional but am rapidly running out of ideas as how to
    a) restore it to the iOS it initially had
    b) update it forcefully and have iOS 8
    c) install a custom rom in the hope some fuctionality exists enough to restore it again.
    Please inform me of any suggestions you might have,
    regards Jack.
    PS. Further information; This has been attempted on 2 seperate windows workstations both running windows 8.1 up to date.
    The USB cable is an unofficial one but has caused no issues in the past on another iphone that ive restored.

    Do you have the latest version of iTunes? Did you check for anti-virus software? One of the sections talks about interference from anti-virus software and firewalls. Also, you should not have to make any changes to your Host file unless your computer has been used to jailbreak a phone. I worry because you were using a number of software applications that are designed for jailbreaking devices. Excerpt from this support document. Get help with iOS update and restore errors - Apple Support
    Check for hardware issues
    Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
    Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Make sure that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.

  • My compouter (PC) no longer recognizes my ipod (4th gen), it "sees" an unknowndevice and gives me error code 43.  Please help.

    My compouter (PC) no longer recognizes my ipod (4th gen), it "sees" an unknowndevice and gives me error code 43.  Please help.

    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Do you need help with error code 1004

    The alert message in iTunes may include one of the following numbers (or the message may include a number not listed here):
    1, -1, 2, 4, 6, 9, 13, 14, 20, 21, 23, 26, 28, 29, 34, 35, 36, 37, 40, -48, -50, 1000, 1002, 1004, 1011, 1013, 1014, 1015, 1479, 1600, 1601, 1602, 1603, 1604, 1611, 1631, 1638, 1639, 2001, 2002, 2005, 2006, 2009, 3002, 3004, 3013, 3014, 3015, 3194, 3200, 9006, 9807, -9808, 9844, 4026xxxxx.
    Click the link for the error code you have. If it's not listed here, check the error messages below, and then if necessary follow the advanced steps below to resolve the issue.
    Resolution
    Specific error messages and resolutions
    Collapse All | Expand All
      Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
    Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
    Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
    Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
    Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
      Error 3014
    This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.
      Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
      Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
      Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue: 
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
      If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
      Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
      Error 1603
    Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
      Error 1611
    This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
      Error 13, 14, 35 and 50 (or -50)These errors are typically resolved by performing one or more of the steps listed below: 
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
      Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    There was a problem downloading the software for the iPhone (or another iOS device)
    See the steps below for error codes 3000-3999.
    iTunes cannot connect to the iPhone because an invalid response received from the device
    This error occurs when there are problems communicating through USB. This may be resolved by following the steps for errors 13 or 14 above.
    Unknown Error containing "0xE" when restoring
    To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
    Hang during restore process

    See the following:
    Error 150:30 - Error "Licensing has stopped working" | Mac OS :
    http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

  • Error Code 600 Autodiscover

    I am using Exchange server 2007 i am facing issue activesync,
    my users are not able to emails from their smartphones
    https://autodiscover.mydomain.com/autodiscover/autodiscover.xml
    <?xml version="1.0" encoding="utf-8" ?> 
    - <Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
    - <Response>
    - <Error Time="12:31:17.3655146" Id="2053059689">
      <ErrorCode>600</ErrorCode> 
      <Message>Invalid Request</Message> 
      <DebugData /> 
      </Error>
      </Response>
      </Autodiscover>
    https://mail.mydomain.com/autodiscover/autodiscover.xml
     <?xml version="1.0" encoding="utf-8" ?> 
    - <Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
    - <Response>
    - <Error Time="12:31:19.5627343" Id="2053059689">
      <ErrorCode>600</ErrorCode> 
      <Message>Invalid Request</Message> 
      <DebugData /> 
      </Error>
      </Response>
      </Autodiscover>
    [PS] C:\Users\Administrator.Mydomain\Desktop>Test-OutlookWebServices | fl
    Id      : 1003
    Type    : Information
    Message : About to test AutoDiscover with the e-mail address Administrator@mydomain.
    Id      : 1007
    Type    : Information
    Message : Testing server MAIL.mydomain with the published name https://mail.mydomain/EWS/Exchange.asmx & .
    Id      : 1019
    Type    : Information
    Message : Found a valid AutoDiscover service connection point. The AutoDiscover URL on this object is https://mail.mydomain/autodiscover/autodiscover.xml.
    Id      : 1006
    Type    : Information
    Message : The Autodiscover service was contacted at https://mail.mydomain/autodiscover/autodiscover.xml.
    Id      : 1016
    Type    : Success
    Message : [EXCH]-Successfully contacted the AS service at https://mail.mydomain/EWS/Exchange.asmx. The elapsed time was 609 milliseconds.
    Id      : 1015
    Type    : Information
    Message : [EXCH]-The OAB is not configured for this user.
    Id      : 1014
    Type    : Success
    Message : [EXCH]-Successfully contacted the UM service at https://mail.mydomain/UnifiedMessaging/Service.asmx. The elapsed time was 181 milliseconds.
    Id      : 1016
    Type    : Information
    Message : [EXPR]-The AS is not configured for this user.
    Id      : 1015
    Type    : Information
    Message : [EXPR]-The OAB is not configured for this user.
    Id      : 1014
    Type    : Information
    Message : [EXPR]-The UM is not configured for this user.
    Id      : 1017
    Type    : Success
    Message : [EXPR]-Successfully contacted the RPC/HTTP service at https://mail.mydomain/Rpc. The elapsed time was 16 milliseconds.
    Id      : 1006
    Type    : Success
    Message : The Autodiscover service was tested successfully.

    Hi
    Error code 600 is an expected result. that means the Autodiscover directory is working fine.
    What error is exchange logging in the application event log regarding users trying to sync phones? Are they domain admins at all? Inheritable permissions ticket?

  • Itune error code 3 come  at the end of restoring process

    help!! my iphone 5 is stuck in recovery mode and when I try to restore it,my iphone start restoring (ios7.1)but in middle of restoring I get itune error code 3,so pls help and the error come  at the end of restoring process

    aparsethi wrote:
    but in middle of restoring I get itune error code 3,
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Also, confirm your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.

  • HT201413 Ipad Air in Recovery mode. Error Code 17

    My Ipad Air is currently in Recovery mode after several failed attempts to update the software.
    Error code 17 keeps coming up as I try to restore and update. Does any body know what error code 17 refers to?
    I am running Windows 7 with the latest version of iTunes, 11.1.4 64 bit.
    Any help or advice would be greatly appreciated.
    Thanks

    Hi there Bluedjlatte,
    You may find the troubleshooting steps in the article below helpful.
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    -Griff W. 

  • HT201210 I have an old i phone 3G and do not know the password for it. trying to restore it from itunes but keep getting error code 1015, any help on how to get passed this please?

    I have an old i phone 3G and do not know the password for it. trying to restore it from itunes so my daughter can use it as an ipod but keep getting error code 1015, any help on how to get passed this please?

    Hi ratcat14!
    I have an article that can help you troubleshoot this issue:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • TS3694 error code 3014 ,can anyone help , iphone 3gs is stuck in recovery mode

    hi can anyone help me ...my son gave me his 3gs and i have tired to restore it itsstuck in recovery mode ...error code 3014

    Top hit on google: http://support.apple.com/kb/ts3694
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.

  • HT201210 cannot restore iPhone 5s.  error code 40

    I cannot restore my iphone 5s after multiple blue screens and I cannot reset with the home-on buttons together.  I updated all software on my mac as suggested and I still get error code (40).  Any help out there?

    Here's what error 40 can be about:
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    Has the software on your phone been modified?

  • I-Phone 4S - Error code (3) when updating/restoring

    Does anyone have a robust solution for an error code (3), which is stopping me from updating and restoring my wife's I-Phone 4S? 13 months old and just out of warranty, Apple and Vodafone retail outlets want to charge us £150 to replace/repair.
    Looking online various blogs suggest that this is a common problem with the I-Phone and I would have expected a better solution than I am currently being offered.

    Error 3 is about hardware issues. If these steps don't solve the problem, your device has a hardware failure and since this is an  iPhone 4s, the only service option would be to replace the defect phone with a refurbished new device.
    Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
    Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Make sure that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    copied from Resolve iOS update and restore errors

  • What is error code 1012?

    i tried logging in many times on my facebook app but an error code:1012 appeared. also i cannot update it on app store coz it should connect on itunes. what is this?

    Possible hardware issues
    Error 1002, 1011, 1012, 1014 : These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue.
    http://support.apple.com/kb/TS3694

Maybe you are looking for