Error Code -120 and saving waveforms

If anyone is experiencing "Error Code -120" inside Logic, or is getting an error that waveforms cannot be saved...
I just experienced this, and found a solution that worked in my case.
These symptoms can be extremely frustrating, because they seem to be permissions related, but you can get these errors even if you have ownership and write access to your Logic session and all associated project files.
Turns out, "Error Code -120" and inability to update waveforms can both be caused by a permissions problem in .Trashes.
In my case, I had a directory inside .Trashes on my project drive:
/Volume/MyDisk/.Trashes/501
and I didn't have write access to that directory. Created a whole SLEW of problems in Logic and in the Finder, including Error Code -120 and waveform update problems.
Removing that directory solved my problem (after several hours of pulling my hair out), and I thought this might be useful advice for others.
Cheers!
-James

I wonder if the immutable bit has been set? If that is the case, this article by Michael Conniff might help:
http://discussions.apple.com/thread.jspa?threadID=121976&tstart=0
The error code you are getting doesn't quite make sense. According to Mac Error codes, 120 means "The version of the "Mac OS ROM" file is too old to be used with the installed version of system software"--which doesn't seem to have anything to do with anything you are doing.
Francine
Francine
Schwieder

Similar Messages

Using garageband i try to add itunes song to garage band and get a error code -120

keep getting a error code -120 when trying to add itunes song to garageband!!!!! please help need to fix asap.

yes ive restarted ive used utility repair. ive updated garageband. and updated itunes cuz thats were im trying to add the songs from to garageband. nothing works. i dnt understand why i cant find how to repair the error code -120 anywhere all ive found is its a directory error but no explanation on how to fix it

When I download the digital copy of the Hunger Games, it stops at 4.0GB and first returns an error code -1309 and then the code -50. Please help me complete the download.

When I download the digital copy of the Hunger Games, it stops at 4.0GB and first returns an error code -1309 and then the code -50. Please help me complete the download. I have tried removing the .tmp folder and downloading it again, but each time it stops the download in the same place.

I discovered the solution. The external drive I was saving it to was formatted as FAT32. In that format, the largest files can only be 4GB, which explains why it kept stopping at 4GB. I backed up all the files then reformatted it as Mac OS Extended (Journaled), this is possible since I am on an iMac.

"Get Error code -120 when I try to save a file?"

I am editing some files and just tried to save one and I got a MacOS error code -120. I cannot find an explanation for this. What is it? It says "Directory not found" but the directory path shows at the top of the file.

Thanks, Bill. Here's what I get when I try to "save as"

Error Code 120 when dealing with locked files

Here's a weird one.
I've been moving some files around from drive to drive, and have a small pocket of resistance in the form of three folders, all containing locked files.
If I "Get Info" on any given file, I'm told that a) the file is locked, which is greyed out, and b) that "You have No Access" under Permissions. Attempting to change the Owner returns the following error message:
*The operation could not be completed.*
An unexpected error occurred (error code 120).
Any ideas? I can't copy the files to their future home, nor can I delete `em. I've Repaired this disk (no errors found) and Repaired Permissions as well, all to no avail.
Any insight would be appreciated!

I wonder if the immutable bit has been set? If that is the case, this article by Michael Conniff might help:
http://discussions.apple.com/thread.jspa?threadID=121976&tstart=0
The error code you are getting doesn't quite make sense. According to Mac Error codes, 120 means "The version of the "Mac OS ROM" file is too old to be used with the installed version of system software"--which doesn't seem to have anything to do with anything you are doing.
Francine
Francine
Schwieder

Can anyone provide Error code list and causes for OBIEE10g/11g ?

Hi
Can anyone provide Error code list and causes for OBIEE10g/11g ?
Regards
Srini
Edited by: Srini on Feb 18, 2012 10:41 AM

Hi,
List of Bug Fixes Included In OBIEE 11.1.1.5.0
Admin Tool
•7538753 SAP BW IMPORT DOES NOT RETRIEVE UNIQUE NAME FOR MEASURE COLUMNS
•10012297 ADMIN TOOL CRASH ON VERY LARGE EXPRESSIONS – OVERFLOW AT APPROX 3200 CHARACTERS
•10032385 TABLE MISSING IN SQL “FROM” CLAUSE – FWD PORT 8308443 TO 11G
•10045212 EQUALITY EXPRESSION IN LTS “WHERE” CAUSES INTERNAL SQORRQLIST ERROR ON QUERY
•10264475 ADMINISTRATION’S “SHUTDOWN SERVER” MENU SHOULD BE REMOVED
•10265121 ADMIN TOOL EXPRESSION BUILDER CRASHES ON DOUBLE-BYTE LOGICAL COLUMN NAME
•10394725 ON-LINE MODE CHECK-IN OF DYNAMIC INIT BLOCK CAUSES [43058] REFRESH LOCK FAILURE
Answers
•6521146 ERROR: “NO FILTER” WHEN USING “COMBINE WITH SIMILAR REQUEST” – UNION
•7534635 INACTIVATING DRILLDOWN ON COLUMN VALUE ALSO INACTIVATES COLUMN HEADER LINK
•9026854 CLARIFICATION REGARDING DATA FORMAT WHEN COMBINING REQUESTS
•9107277 KEEP THE NUMBER PRECISION IN DATABASE WHEN “DOWNLOADING TO EXCEL”
•9524080 PIVOT TOTAL DIFFERENT TO TABLE TOTAL WHEN REPORTAGGREGATEENABLED TRUE
•9697529 JAPANESE CHARACTER SET NOT PASSED CORRECTLY TO DRILL REPORT IN FIREFOX BROWSER
•9871470 SORTING ON A NULL VALUED COLUMNS GIVES ASSERTION ERRORS
•9886904 CORRECT DOC FOR ADDING CUSTOM DATE FORMAT STRING
•9918283 CORRECT DASHBOARD FORMATTING PROBLEMS WITH SCROLLING
•9928318 ROW HEADER MISSING AT PIVOT TABLE VIEW FOR MIGRATED REPORTS IN 11G
•9968574 SOME UPGRADED 10G CHARTS SHOW UP JAVA EXCEPTION
•10023165 MAPS DO NOT WORK IN MAP VIEWS WHEN JOIN COLUMN CONTAINS A “&” CHARACTER
•10065166 GAUGE RANGE IS NOT UPDATED WHEN IT CHANGES THE FIELD VALUE
•10078041 ACTION LINK DOES NOT WORK WHEN COMPOUND LAYOUT ONLY HAS A MAP VIEW
•10091354 “SCALE MARKERS” OPTION IS MISSING IN VERTICAL AXIS 2
•10147762 CANNOT SET GAUGE FOOTER (TITLE), KEEPS SHOWING “UNDEFINEDUNDEFINEDUNDEFINED”
•10182955 BUBBLE CHART IS NOT BEHAVING AS EXPECTED
•10213761 CONDITIONAL DASHBOARD SECTIONS (GUIDED NAVIGATION) ALWAYS RUNS REPORTS
•10229397 CANNOT SAVE REQUEST USING STANDARD DATE FORMATS.
•10282140 CELL IMAGE AT BLANK CELL OF PIVOT TABLE IS NOT DISPLAYED WHEN USING COND FORMAT
•10296730 UNABLE TO USE PRESENTATION VARIABLE IN SCALE MARKERS
•10312496 CHARTS. MEASURE LABEL IN GRAPH PROMPTS DOES NOT CHANGE CONTENT OF THE CHART
•10312795 ACTION LINK ON COLUMN HEADING NAVIGATION DOES NOT CONSIDER PROMPT VALUES
•10329343 CLICKING A LINE GRAPH BETWEEN TWO DATA POINTS DRILLS TO LAST VALUE IN HORIZONTAL
•10337649 PIVOT TABLE SHOWS BUTTONS FOR SORTING ON CALCULATED ITEMS.
•10402102 INCORRECT RESULT WHEN USING [NEW CALCULATED ITEM] PROP IN PIVOT TABLE
•10414887 DRILL DOWNS NOT WORKING IN CHART PIVOTED TABLE SELECTED FROM VIEW SELECTOR
•10418875 CHART SIZE IS CHANGING AFTER WEBCAT UPGRADE FROM 10G
•10634175 GRAPH ENGINE IS NOT RESPONDING
•10639913 COMPLETE TEXT IS NOT SAVED IN DB IF CURSOR IS MOVED AWAY DURING INSERT
•11711658 FILTER NEEDS TO SUPPORT UNTYPE LITERAL FOR RANK OPERATOR AS 10G DOES
•11805468 CUSTOMIZED GAUGE VIEW IS NOT CONSISTENT WHEN EXPORTED AS PDF,HTML AND XLS
•11817696 INCORRECT FILTER IS BUILT IF FILTER IS CONTRUCTED BEFORE SELECTING REQ. COLUMNS
•11845286 PIVOT TABLE WITH PERCENTAGES, GRAPHED PERCENTAGE VALUES DISPLAYED ARE INCORRECT
•11894921 GRAPH LABEL OPTIONS NOT AVAILABLE IN 11G
•11895279 INCORRECT FILTER VALUE WHEN USING ACTION LINK WITH GRAPH
•12412666 ALL PAGES LOSES CONDITIONAL FORMATTING
•12561361 PSE FOR BASE BUG 10295403 ON TOP OF 11.1.1.5.0 FOR GENERIC OS
CHARTING
•8990756 MISLEADING INFORMATION IN DOC REGARDING PIVOT TABLE SETTINGS
DASHBOARDS
•7459700 ABILITY TO SPECIFY FIXED COLUMN WIDTH TO A DASHBOARD PROMPT
•10177865 OBIEE 11G : DEFAULT VALUES CANNOT BE DE-SELECTED FROM MULTI SELECT PROMPT
•10279722 DASHBOARD SLIDER PROMPT SHOWS THUMB VALUES WITH TWO DECIMAL PLACES FOR INTEGERS
•10279829 DASHBOARD SLIDER PROMPT SHOWS WRONG VALUES FOR “ALL COLUMN VALUES” OR “SPECIFIC
•10310511 “REQUIRE USER INPUT” MESSAGE APPEARS THE FIRST TIME ONLY FOR THE REQUIRED PROMPT
•10389799 DASHBOARD NAVIGATION MAY CAUSE GETELEMENTBYTAGNAME ERROR IN IE
•10411545 PROMPT WITH BETWEEN OPERATOR AND SQL DEFAULT VALUES ARE NOT UPGRADED PROPERLY
•11056057 ERROR WHILE UPGRADING THE DASHBOARD WITH CERTAIN FILTER FUNCTIONS
•11076452 ABILITY TO CONSTRAIN PROMPTS AGAINST A SLIDER PROMPT
•11717024 ERROR 500 OCCURS WHEN SETTING ACCESSIBILITY MODE TO ON
•12620143 PSE FOR BASE BUG 12561330 ON TOP OF 11.1.1.5.0 FOR LINUX X86 [46] (PSE #602152)
INSTALL
•9459177 PREREQUISITES FOR DEPLOYMENT ON SEPARATE MACHINES
•9540009 UNIXCHK.SH ENCOUNTERS HOST NOT FOUND ERROR WHEN DNS IS NOT AVAILABLE.
•10071302 ENTERPRISE INSTALL: CONFIGURE PORTS : FORMAT OF INI FILE
•10126542 OBIEE 11G INSTALATION FAILS AT AS INSTANCE CREATION DUE TO PERM SIZE ERROR
•10287335 CANNOT START BISERVER1 . SWITCH TO JSSE FRAMEWORK REQUIRED
•10302421 OBIEE 11G WINDOWS PROMPTS FOR USERNAME / PASSWORD AFTER ENCRYPTING CREDENTIALS
•11849674 SAG: DISCREPANCY IN DOCUMENTED ORACLE DATABASE REQUIRED FOR MAPVIEWER
MIGRATION
•7432799 ORACLE EUL CONVERTER CRASHED WHILE GENERATING A REPOSITORY
REL_NOTES
•12604761 TWO STEPS OF THE UPGRADE TO 11.1.1.5.0 ARE NOT CLEARLY DOCUMENTED
SCHEDULER
•10036466 “RE-RUN INSTANCE(S) NOW” MENU IS NOT AVAILABLE FOR COMPLETED JOB INSTANCES
SECURITY
•8996295 PROVIDE DETAIL INFORMATION TO SETUP WNA(KERBEROS) FOR OBIEE AUTHENTIFICATION
•9216995 PROVIDE LATEST DETAIL INFORMATION ABOUT HOW TO SETUP LDAP SSL FOR OBIEE
•10194154 TECHNOTES- PROVIDE DETAIL INFORMATION TO SETUP WNA(KERBEROS) FOR OBIEE AUTHENT
•10198837 BIEEHOME LOGIN PAGE IS NOT DISABLED EVEN AFTER ENABLING THE SSO
•10218031 USING EXTERNAL DB TABLE TO SET ROLES SESSION VARIABLE DOESN’T ACCEPT LONG NAMES
•10373788 IF OBJECTGUID PUBLISHED AND SAMACCOUNTNAME CHANGED USER CANNOT CONNECT ANYMORE
•11731080 QA:SECURITY GUIDE NEEDS UPDATE FOR DEFINING A USER SESSION VARIABLE
SERVER
•6510747 NETWORK FAILURE DURING PHYSICAL QUERY HANGS END USER WITHOUT ERROR MESSAGE
•6836444 OBIEE SERVER SYSTEM DATE IS WRONG AND DOES NOT MATCH MACHINE SYSTEM DATE
•8371912 BI SERVER CRASHES ON NAVIGATION SPACE MAP RACE – SR 3-887711721
•9433198 DOCUMENT SYSLOG ENTRIES IN SYSTEM ADMINISTRATOR’S GUIDE
•9696424 DOC INSTANCECONFIG PARMS ALLOWEDLANGUAGES & ALLOWEDLOCALES IN SYSADMIN GUIDE
•9954411 PSR:MOD_SUPPORTED NOT ENABLED FOR TERADATA AND CAUSES CAMPAIGN SLOW PERFORMANCE
•10258683 REQUEST WITH COMPLEX FILTER IS CONSUMING ALMOST ALL CPU & NO SESSION IS CREATED
•10258755 EXCEL FAILS TO CONNECT TO 11G BI SERVER USING ODBC DSN
•10335924 REPORT-BASED TOTALS FAIL ON MEASURES CONTAINING AGGREGATION EXPRS SUCH AS FILTER
•10374571 NEED FLEXIBILITY TO OVERRIDE HOSTNAMES WHEN CUSTOMER DNS IS INCORRECT OR BROKEN
•10650122 PIVOT VIEW WITH UNION OF NON – COMPATABLE TYPE ERROR IN OBIEE 11G AFTER UPGRADE
•11804596 NQQUERY LOG LEVEL 2 IS TOO VERBOSE – BACKPORT 10308263 TO 11.1.1.5
•11809295 NQUDMLGEN NOT GENERATING UDML FILE IN UTF FORMAT
UPGRADE
•9886765 ERRORS ENCOUNTERED WHEN UPGRADING WEB CATALOG USING UA.BAT
•10121344 ERROR IN LOG USING UA TO UPGRADE BI SCHEDULER SCHEMA ON SQL SERVER DATABASE
•11069928 UPGRADE SHOULD HANDLE PROMPT WITH INCONSISTENT VALUES AS 10G DOES
WEB_ADMIN
•8564456 SHARED FOLDER ACCESS PERMISSION ISSUE
•9381764 CATALOG MANAGER COPY FUNCTION NOT WORKING AS EXPECTED
•9739865 EXITING MANAGE SESSION RESULTS IN HTTP ERROR
•10016252 LACKING INFORMATION ON FORCEABSOLUTECOMMANDURL FOR ABSOLUTECOMMANDURLPREFIX
•10144989 WEB CATALOG DOES NOT UPGRADE TO 11.1.1.3.0
•10218524 VALIDATION ERROR AFTER THE UPGRADE OF WEBCATALOG TO OBIEE 11G
•11723425 INCORRECT DEFAULT VALUE OF DEFAULTROWSDISPLAYED IN THE INSTANCECONFIG.XML
•11827202 OPMN NOT STARTING AFTER SETTING UP THE REPLICATION AGENT
WEB_GNRL
•10191078 FILTER VALUES ARE RESET IN GO URL WHEN COLUMNS ARE SORTED OR RE-ARRANGED
•10360461 NEED ABILITY TO CONTROL NEW, DASHBOARD AND OTHER HEADER LINKS
•11780508 10G COLUMN FILTER PROMPT WITH PROMPTCAPTION ATTR NOT UPGRADING
•12416695 TOOLTIP EMPTY IN MAPVIEWER
WEB_INTGRT
•10294759 FMAP-REFERENCED IMAGES IN ANALYSIS HEADERS DONâ€™T APPEAR IN DOWNLOADS TO EXCEL
WEB_MKTG
•8692820 DIRECT DATABASE CAMPAIGN LOAD FORMAT COMBINED LISTS FAILS
•9908019 SAW SERVER CRASH WHEN LOADING A PARTICULAR CAMPAIGN
•9935859 UNGROUP OF SEGMENT BLOCKS CORRUPTS SEGMENT DEFINTION AND BAD COUNTS
•10331355 MOVING CRITERIA WITHIN A SEGMENT’S GROUP CORRUPTS THE INCLUSION OPTIONS
Thanks,
RM

Error code -120

hi
i'm getting an error code -120 (could not find directory) as i try to import audiofiles from one of my external drives. funny thing: some files i can import, some not. if i open a LP song from that drive, it opens normally. also using quicktime player to open one of these audiofiles works without problem...
i see all the files in the finder and if i copy them to another drive, i am able to import them into logic...
any ideas ?
thanx.

When do you get this error?
Best of luck.

2TB Ext. Hard Drive is corrupted?, error code -50 and then error code -35 when i try to empty out my trash

okay so a few days ago i received and email for one of my colleagues to do some final editing to a music video. the folder contained 2 videos a rough chops and the main which was about 2-3GB which i dragged on to my external hard drive . and at the time i was trying to install a trial version of parallel lines and me being a newbie to the software i didn't know i need windows installments for it to run lol but yeah... so i was just getting frustrated with the software i kept installing it uninstalling it and then i was thinking my the problem might be because my MacHD space is low (less then 40GBs on my MacHD), so.. i installed it on my hard drive where all my important files are (I'm a graphic designer and do light video editing) video projects and many photoshop projects form 2007 and logs and just a bunch of important files in my hard drive. so because i was so frustrated with the software i wasn't thinking and i installed it on my external 2TB hard drive. and when i realized parallel wasn't working i gave up, uninstalled the program form the hard drive and for some reason when i did that and i tried opening the video my friend had email to me and for some reason it did load up but a few seconds maybe about 10sec in the video is froze and closed my media app (VLC) and when i tried opening other video files it would freeze every few minutes but those specific files i had drag in last were not playing after at least 5 secs and eventually didn't open at all so i restart my computer login and now i get scared i see that my MacBook Pro isn't reading my external hard drive so i search threw forums... i unplug from the wall plug my external hard drive back in my computer and it loaded up but when i opened my external hard drive all my files had that plank white paper icon on my folders (because i have everything organized but subject when you open then drive folder. so... i go in to my projects and nothing, i open my edited photos and nothing... my hart feels like its about to drop and i keep opening files and there is nothing in them, but in "get info" of my drive it shows that there is filled so i go to "disk utility"... i "verify disk" passes ..."repair disk" doesn't past.... i look it up in forums... so i reboot my computer and go to the safe recovery menu. go threw the same ting "disk utility"... verify, pass... repair, pass... so now i feel relieved. i login files in the ext. hard drive load up i tried again to open the files and same thing happens... so now I'm thinking its the files i drag the files to the trash and try to empty and its gone i reboot the computer and my drive didn't load up so i tried unplugin it and back in... drive comes up i notice theres trash.. i tried emptying it and i get the error code -50. and no files are popping up on my external drive and i try to repair/unmount disk and the verify disk doesn't pass and when i click repair disk it doesn't past and another error code pops up -35.... so i felt my drive alone for a few days and yesterday i go the files deleted from the trash and now I'm not getting any codes but when i try to unmount.verify/repair the disk. keeps letting my tits need to be repaired so i click the repair button another error unable to unmount volume to repair...
what do i do? my files still don't show up. and I'm very sorry for the long paragraph but i have to be detailed for you to understand my situation

Read this.

Windows Update Error Code 80070663 and 64C

I am running x64 Vista on an HP Pavillion dv9000 laptop.
I was cleaning up my desktop when I saw a Word doc I didn't recognize. I tried to open it and got a Windows Installer window saying "Preparing to Install". I have an activated, legal version of Microsoft Office 2007. This is the first time
I've seen that window pop up. I let it try to install whatever it's trying to install and it comes up with an error: "This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application
vendor to verify that this is a valid Windows Installer update package." I am the administrator on this computer. I have full access to all files.
This prompts me to start Windows Update to see if that will fix it. That's where the error codes come in. The windows updates: "Microsoft .NET Framework 3.5 Family Update (KB959209) x64" and "Security Update for Microsoft Visual C++ 2008 Service
Pack 1 Redistributable Package (KB2538243) yielded the error codes 80070663 and 64C.
I noticed when I press Start, the power button occasionally says "Installs Updates then Shuts Down". I didn't click it because I had work open I needed to work on later. Then when I left the computer and came back, the power button didn't have
the shield on it that said "Installs Updates then Shuts Down". I shut down my computer anyway and it didn't install any updates, and this is where I'm at. I've retried installing the updates via Windows Update and it still shows the original error
codes.
I've researched this error and came across Microsoft Fix It, downloaded as: "MicrosoftFixit.wu.LB.137269729445221149.2.1". I've run it and it did not solve the problem.
Please help,
Jake

Jake, did you ever find a solution to your problem? I'm afraid I can't help if you didn't, but I'm experiencing the same problem.
I also run Vista and had no problems until recently when I had an installation failure on 12th April 2014 for the same two updates:
Microsoft .NET Framework 3.5 Family Update (KB959209) x86 - (Installation status: Failed. Error details: Code 80070663)
Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243) - (Installation status: Failed. Error details: Code 64C)
I don't know whether it's these updates that caused the problem or an earlier update that has stopped these updates been installed. The PC is generally working but Word & Excel don't load any more. I get a 'Preparing to install' popup follwed by
the message: 'This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package.'
If you did find a solution or any one else knows of one then I'd be very grateful.
Dave.

Error Codes 1630 and 1722 when installing FSX in Windows 8.1

Multiple efforts to install Flight Simulator X Gold on my new 8.1 system always results in error codes 1630 and 1722 at the end of the installation process. Lots of searching the net suggests that this not an uncommon problem. After trying a
number of possible fixes suggested by a Microsoft Support Engineer in a thread on the Microsoft Community Forum without success, he referred me to this forum.
In summary: After initially transfering a working version of FSX from my XP machine to the new 8.1 machine with LapLink it worked flawlessly. A subsequent misdiagnosed printer issue by Dell tech support resulted in a refresh of 8.1 wiping out FSX (and
many other apps). Efforts to reinstall FSX from the either the original disks or a newly purchased set of disks both resulted in the error codes at the end of the installation process. Failed resolution efforts include so far include:
- All recommendations in kb/258496 (including Xcopy which appears not to work on 8.1 at all)
- Clean startup procedure from kb/331796 (8.1 froze up hard in trying it)
- System File Checker per kb/929833 showed "did not find any integrity violations".
- Licensing Reset Tool program per kb/928080 resulted in: "Cleaning up Token Store at: C;\Program Data\Microsoft\SLDL\Software Licensing Failed to delete the token store ERROR --HRESULT 800405"
Bottom line seems to be that this is recurring issue with 8.1 and FSX but neither I or the Community Forum have been unable to find an effective solution. Any advice/help/recommendations would be appreciated. Will be glad to provide needed additional
info as needed.
Mark Davis

- Licensing Reset Tool program per kb/928080 resulted in: "Cleaning up Token Store at: C;\Program Data\Microsoft\SLDL\Software Licensing Failed to delete the token store ERROR --HRESULT 800405"
try this solution replied by Colin Vincent
http://www.justanswer.com/computer/7b2g4-using-fsx-years-when-loading-receive.html
you should post in this support forum
http://www.microsoft.com/Products/Games/FSInsider/community/Pages/

I need help, i can't download free applications in App store. they answer me "your request cannot be processed Error code:1009". and after they said "we could not complete your request. There was an error in the App Store. Please try again later (nul

i need help, i can't download free applications in App store. they answer me "your request cannot be processed Error code:1009".
and after they said "we could not complete your request. There was an error in the App Store. Please try again later (null)".
COMPUTER DETAILS: MacBook Pro 13-inch, Mid 2012 OS X Version 10.9.5; Processor 2,5GHz Intel Core i5; Memory 4 Go 1600 MHz DDR3.
Thanks beforehand!!!

Error
what is error code 1009?

Error code 600 and 500 on autodiscover in Exchange 2010

Hi,
I have a problem on Exchange 2010 Autodiscover, the error code 600 and 500, Please see below message and please help to fix this error.
<?xml version="1.0" encoding="utf-8"
?>
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response>
<Error Time="09:28:57.8739220" Id="2715916636">
<ErrorCode>600</ErrorCode>
<Message>Invalid Request</Message>
<DebugData />
</Error>
</Response>
</Autodiscover>
Thanks,
ShutMo

Hi,
The website https://host.abdomain.local/autodiscover/autodiscover.xml
Shows the following error:
<?xml version="1.0" encoding="utf-8" ?>
<Autodiscover xmlns= "http://schemas.micosoft.com/exchange/autodiscover/responseschema/2006">
<Response>
<Error Time="09:28:57.8739220" Id="2715916636">
<Errorcode>600</Errorcode>
<Message>Invalid Request</Message>
<DebugData/>
</Error>
</Response>
</Autodiscover>
Test Email Autoconfiguration
<
I have do "Test Email Autoconfiguration" and have the following log:
Guessmart POP: server pop3.aadomain.com, port = 110, initializing
Guessmart POP: server aadomain.com, port = 995, initializing
Guessmart POP: server pop3.aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server aadomain.com, port = 110, initializing
Guessmart POP: server aadomain.com, port = 995, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, starting
Attempting URL https://host.abdomain.local/Autodiscover/Autodiscover.xml found through SCP
Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml starting
GetLastError=0; httpStatus=500
Autodiscover request completed with http status code 500
Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml failed (0x80004005)
Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml starting
Guessmart IMAP: server mail.aadomain.com, port=143, ssl=Yes, tls=No, spa=No, failed (0x800CC4005)
Guessmart IMAP: server mail.aadomain.com, port=143, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server pop.aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, failed (0x800CCC1A)
Guessmart IMAP: server imap.aadomain.com, port 143, ssl=Yes, tls=No, spa=No, failed (0x800CCC1A)
Guessmart IMAP: server imap.aadomain.com, port 143, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server pop.aadomain.com, port 110, ssl=Yes, tls=No, spa=Yes, starting
then I received another failed.
Please advise.
Thanks,
Shutmo

Officejet 4630: Error code 0XB00A7A4E and it's all it does.

Hello, my Officejet 4630 had some problems, yesterday it asked me if I wish to install ne w firmware and I thought this would solve the problems, so I clicked ok.Now it does not do anything anymore.It displays error code 0XB00A7A4E, and beeps all the time. I took out the USB, the power, waited... same thing.The Online forum says that one should open it and take out the cartridges, but when I open it, the cartridges do not come to the middle, to the "removable" area. So it is completely stuck.Any help? Thank you!

Hello , Welcome to the HP Community!I hope you have a pleasant experience here. I'd like to help you with the 0XB00A7A4E error that you are getting on your HP Officejet 4630 e-All-in-One printer. Errors such as the one you are experiencing can either be caused by a firmware issue, or a jammed carriage. It can be difficult to tell which. One of the most common fixes for a firmware error is to plug the printer directly into a wall outlet. The printer has a power moderator built in, so if it is plugged into a surge protector or battery backup, it often causes a power fluctuation. This can result in firmware errors similar to what you are experiencing. I'd recommend trying this first. If that doesn't immediately resolve the issue, I'll get you to check the cartridge carriage inside the printer. Is it locked in position? Are you able to move it at all? If you can move it, I recommend uninstalling and re-installing the cartridges. If not, I'd recommend contacting our HP Phone Support for further assistance:Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your
contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone
number I hope this helps!

My ipod classic keeps showing error code 1439 and says its corrupted and nothing on the site that it says to do is working has anyone else had the problem

my ipod classic 160 gb keeps showing error code 1439 and says it is corrupted and i have done everything the article on it says to do and still reads the same thing. has anyone else had the same problem if so what can i do to fix it. the ipod is only 2 months old

If it is under warranty, bring it in to Apple Store, most of our suggestions, comes from the Apple support site..
Besides Restoring the iPod, there are winsocks which have conflict with iTunes, perhaps, disable those plugins and disconnect the Internet and stop antivirus, while you are Restoring or Syncing the iPod.

Windows Updates Error Codes 80070308 and 80070643

Recently I have a problem with windows updates patches for this month (June 2014). I updated 10 computers (at office), 9 of them have either the error codes 80070308 and/or 80070643. I tried to disable the Symantec Endpoint, used the Microsoft
.NET Framework Repair Tool to fix the .Net Framework related error but still have failure. I can still finish all the failed patches by rescanning the PC than install them; however; I still have 40 PCs need to be patched. How do I prevent
the installation failure, all the PCs have no problem at last month. Any suggestion, many thanks.

Hi,
If your computer is having problems finding and installing operating system update, I suggest to
try the windows update troubleshooter.
To run a Windows Update troubleshooter:
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
An automatic troubleshooter is available that fixes some problems with Windows Update, and it might resolve this error for you
http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
this error can appear when installing updates for Microsoft Office 2003,
to fix Windows update with error code:80070643:
http://windows.microsoft.com/en-us/windows/windows-update-error-80070643#1TC=windows-7
If your computers are in a domain environment and get updated by a WSUS server, I suggest to update the group policy with the command “gpupdate /force”.
Meanwhile, if it doesn’t help, please upload the Windowsupdate.log at: C:\Windows, this will give detail error information for further support.
Regards
Wade Liu
TechNet Community Support

Error Code -120 and saving waveforms

Similar Messages

Maybe you are looking for