Error Code 14 on I touch one, cannot resolve?

I tried to update safari thinking it was the right thing to do, thinking now I should not have as maybe it was for 2nd generation?
I have the dreaded Itune USB connect Picture up and I cannot resolve it or reset? after several tries !
any ideas, it maybe 1st generation but I like it and want to buy a mac pro 13" soon and do not want to have to buy another itouch for a while.

I have an appointment with apple genius monday.

Similar Messages

What is error code 1009 on ipod touch and how can i solve it?, what is error code 1009 on ipod touch and how can i solve it?

What is error code 1009 in ipod touch? How can i solve it?

See if this previous discussion helps:
https://discussions.apple.com/message/18497695#18497695

I keep getting Error code: ERR_TIMED_OUT when accessing only one website through googlechrome or safari

I keep getting Error code: ERR_TIMED_OUT when accessing only one website through googlechrome or safari

Www.Onereceipt.Com<http://Www.Onereceipt.Com>
Sent from my iPhone

Error code -39 on iPod Touch

Hi There,
Can anyone help?
Cannot sync with iTunes unknown error code -39
A2MWY

I don't know about that particular error code but [Update and restore alert messages on iPhone, iPad, and iPod touch|http://support.apple.com/kb/TS1275] has some useful info.
Hope it helps!

HT1414 my iphone 4 running on IOS 5 will not come out of recovery mode and gives the error code -1. Can any one help me please because i've been without a phone for 2 weeks and still not getting anywhere.

Hi there could someone out there please help i've got a Iphone 4 running on IOS 5 and it will not come out of recovery mode> It comes up with the error code -1 which i've looked everywhere on the web but no one seams to have the same issue.
This is a reconditioned replacement phone from the apple genius guys which i paid £130 for and only got 3 months warranty with and as soon as the warranty run out it crashed on me and never been able to get it back out of recovery mode. I've been back to the apple genius guys and they have told me there's nothing they can do other than charge me £130 to take the phone off me and give me another reconditioned phone with a 3 month warranty. Which as you can properly tell i dont want to.
PLEASE PLEASE HELP ME thanks for your time

This is a bad hardware error, Baseband Error. Some have reported getting through this error by Restoring iPhone with the SIM Card removed. Try that. Try restoring with different computer. Search Web some more for other thoughts.

Error Code 21 with iPod Touch

Hello, I recently registered my iPod Touch's UDID, and of course tried out iOS 7. But wanting to go back to iOS 6 for stability I restored to the ipsw, but when I did it went into a recovery loop, so since iTunes didn't seem to be able to fix it I used redsn0w to get out of the loop. But now with iOS 7 beta 6, which is supposed to be more stable, I figured I'd give it another chance and upgrade again. But, whether I try to restore into iOS 7 or do an upgrade, it gives me and error code 21 and goes into that recovery loop. Just for clarification I have an iPod Touch 5th generation, windows 7 ultimate, avast antivirus (error code 21 supposedly is related to anitvirus), and the most recent iTunes as of right now. Any help or ideas is appreciated, thanks!

Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
You say you have iOS 7. If you are a developer you have access to the private OS 7 developer's forum
iOS 7 Developer forum- Apple Developer
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Error code 2 restoring ipod touch

im trying to restore my ipod touch and i get error code "2" when its says "restoring ipod software"
please help ive tried everything
thanks

No, you are not going to lose anything.

Error code -36. Two MACs: One mac can copy DVD data, one can't.

On the G5 that appears in the profile below, I cannot copy VOB files without getting error code -36 in which the copy operation times out. Another older 1.6G G5 can copy. The problem computer has a Pioneer 115D burner. Older computer has a Sony U10A.
I believe the problem has come with the new (4 months) Pioneer drive, cause I definitely used to be able to copy off the DVD drive, just don't remember how recently. Doggoneit!
Thanks.

I just determined that the same function thru the network was a problem which pointed to the target fw800 G-drive. Then I started copying thru the network and off a DVD to a fw800 G-RAID drive, and the copy was a success.
So now the performance of this G-Drive (non-journaled). Why would this drive behave this way?

What is error code 603 and how does one fix it?

What is error code 603, please, regarding add-on installation? (The error codes page says for "error 6xx" to contact the Exchange online forum for assistance..) It is a "failed online license check" for an add-on that is a free add-on listed on the Adobe Add-ons page as compatible with PS CS6, CC, and CC 2014, as well as all three versions of a bunch of other apps. It is a Flypaper app, which looks to have been reworked to be compatible with the new 2014 apps. Since Flypaper apps come from reliable source, I'm not sure what the error means, and I'm certainly not sure how to remedy this. (The original Russell Brown Paper Textures Pro works fine on PS CC but isn't compatible with 2014.)
I am running Win 7 64-bit.
Thanks.
Gail
p.s. numbers of other extensions still don't download to PS 2014, so maybe this is also waiting for an Adobe fix??

The add-on in question is called "Flypaper Select" (by Flypaper Textures).
This morning, when I sent the question, it was on last page of the free PS
add-on list and showed the add-on as compatible with all three latest PS
versions. Tonight, when I click on the add-on in "my add-ons" list, it now
shows compatibility only with PS6 and CC, and I can no longer even find it
in the big add-ons list. I will try to send screen shot of "my add-ons" to
the address you listed. It is also below.
Thanks for your help. I have been finding many add-ons change from day to
day, and many won't show up in Extensions window even though the desktop CC
app says they have been installed. I assume I am not the only person with
these problems.
Gail

HT4097 i have tried to restore ipad and continously it gives an error code of 1604. i have also set ipad in recovery mode multiple times and everytime the restore shows an error code of 1604. How do I resolve this?

I was trying to update the iOS to version 6. The iPad was backed up and when trying to update the iOS 6 it errored with -1 error code. I set the iPad in recovery mode and tried to Restore it. It then gave an error code of 1604. I have tried the steps mentioned in the troubleshooting article for 1604 error and so far no luck restoring my iPad. Please help.

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

Error -50 I have contacted iTunes but cannot resolve the issue

I have tried downloading four different songs but every time error message 50 pops up and I cannot get any song to download even after iTunes help. If you have resolved this issue please let me know how to solve the issue.

Some other posts seem to indicate that the cause is related to voice memos. You may want to try the remedy described in this document
http://support.apple.com/kb/ts2830
although it says it's for the 6th gen iPod nano.

Cannot update drivers error code 193 on All in one 8500 Win 8.1

Running Win 8.1 updated from 7.. All in One 8500 910A Can do basic printing but no longer have twain support for scanning etc. When trying to update get failure notice error number 193. HP message says they have no further advice

Hi @clamproad ,
I see that you no longer can scan after updating to Windows 8.1. When you try to update, you are getting a failure notice error number 193. I would like to help you resolve this issue.
Did you fully uninstall the old HP Software and try downloading the newest software?
Here are the Full Feature Software Drivers if you haven't installed them.
HP Officejet Pro 8500A e-All-in-One Printer - A910a Drivers.
Select your operating system, click next and click on the software to download and install.
Here is a document on this issue. After Upgrading the Computer to Windows 8.1, the HP Printer Does Not Print and the Printer Software ...
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How do i fix error code 3014 on ipod touch 1st generation?

please help

Hi justinlee1234,
Welcome to Apple Support Communties!
Take a look at the article linked below, it provides tips for resolving the 3000-3020 alert messages, which indicate iTunes cannot communicate with the update server.
Error 3194, Error 17, or "This device isn't eligible for the requested build"
http://support.apple.com/kb/ts4451
Resolution
If you see one of these messages and need help updating or restoring your iOS device, install the latest version of iTunes and try to update or restore again. If you need more help, follow these steps.
Check your hosts file
After you update iTunes to the latest version, check the hosts file to make sure your computer can contact the update server.
If you’re using a Windows computer, follow the steps in this Microsoft support article (note that resetting thehosts file will affect software services that rely on hosts file redirects). If you're using Windows on a business computer, consult your IT department to be sure applications will work correctly after you reset the hosts file.
If you're using a Mac, follow these steps:
In the Finder, choose Applications > Utilities.
Open Terminal.
Enter this command and press Return:
sudo nano /private/etc/hosts
Enter the password you use to sign in to your computer and press Return. You won't see text appear in the Terminal window when you enter the password. Make sure you use a nonblank administrator password.
Terminal will display the hosts file.
Navigate using the arrow keys and look for an entry containing “gs.apple.com”.
Add the # symbol and a space ("# ") to the beginning of the gs.apple.com entry.
Press Control-O to save the file.
Press Enter when asked for the filename and Control-X to exit the editor.
Restart your computer.
Try to update or restore your iOS device again.
Address TCP/IP filtering, firewall, or security software
If you have TCP/IP filtering, firewall, or security software installed on your computer, follow these steps.
Follow these steps to configure or temporarily uninstall your security software.
Bypass your Internet router. Some routers might block iTunes from accessing the update server. If you're using a router that isn't manufactured by Apple, try these steps.
Disconnect from your wired or wireless router.
Use an Ethernet cable to connect directly to your modem.
Restart your computer and modem. Contact your Internet service provider for instructions on using your modem.
Be sure you have a working Internet connection by visiting www.apple.com. See these steps for help or contact your Internet service provider.
If your Internet connection is working, try to update or restore your iOS device again.
Restore or update on another computer
Try to restore or update on another computer with a different Internet connection. This will help rule out other issues on your computer that might stop iTunes from communicating with the update server.
Errors 1639, 3000-3020, and 3100-3999 (with the exception of 3194) are sometimes caused by your network settings. If your computer uses a managed network, refer to your network administrator. Proxies, firewalls, and other network security measures can cause these errors. If necessary, find a different network connection to restore the device. For example, if you're restoring at work, try to restore at home or on a friend's computer and network.
-Jason

After it downloaded it had a circle and line through it- and it won't work. i get an error code (-10661) and it says it cannot be launched. whats going on?

i followed all the instructions for downloading firefox. when i tried to drag it into the applications folder it had a circle and line through the icon. it copied into applications successfully, but it won't launch. this mac is really old, G4 from 2000 i think (hand me down) alot of applications will not work with this computer (flashplayer for one, adobe updates ect) because it is so old. what can i do?

Are you getting an error message number with that error message? If so, what number are you getting, please?

TA20831 Why do I get error code -50 when copying from one external drive to another in OSX Lion 10.7.4?

Any pointers (apart from 'googling') would be appreciated. Thanks

I have not yet been able to figure out what the problem is. I have checked the iMovie and other forums, both here and elsewhere on the Web, and I have not come across a single post that relates to this problem. The files I have been trying to copy are still on the external drive, and I have used the drive to store and transfer other files to and from my TiBook with no problems. But those three iMovie files, which will open and play from the external drive, STILL won't copy back onto my hard drive.
The one thought I had involved disk space: Maybe a significant amount (30GB or more) of free space needs to be on the target drive when copying such large files. When I get to a point where I can delete some of the larger files I have been tinkering with, I'll try again.
In the meantime, any insight from anybody into this issue will still be appreciated.

Error Code 14 on I touch one, cannot resolve?

Similar Messages

Maybe you are looking for