Error code 15 with pda program

Dear All
I get error code 15 when I run a program using daqmx base on a pda through daq card E 6024. Previously I was able to run these programs but after removing and inserting the card into the pda, I get error 15. I am using Labview 7.1 on operating system 2000 to create the programs.
Any ideas?
Many Thanks
Rupa

Hi, some of the common issues are listed below :
Error code 15 is “Unable to Locate Device”, which means that the DAQmx Base driver is unable to find the device on the PDA. Here are some common issues to check.
Is the expansion pack fully connected? Be sure that connection is secure.
If the expansion pack is connected and still the DAQCard is not detected, try re-powering the PDA.
If you have a dual slot expansion pack, sometimes the power schemes can keep DAQmx Base from detecting the DAQCard. Try changing the following settings. Go Start>>Settings>>System>>Power>>”Uncheck Options Boxes to Not Turn Off Device if Not Used For” PDA Battery. Also change Start>>Settings>>System>>Power>>”Uncheck Options Boxes to Not Turn Off Device if not Used for” Expansion Pack Battery Power.
After changing this, the board should be detected by DAQmx Base.
Try reinstalling the DAQmx Base Driver for the PocketPC device.
Please let me know if any of these option work.
If not - is the card ok in a laptop?
Thanks Sacha Emery National Instruments (UK)
// it takes almost no time to rate an answer

Similar Messages

"error code-39 with core audio driver"

so I have a 75 minute continuous dj mix I recorded onto garageband... after having recorded this I then converted the file from a 120bpm to a 60bpm speed so as to fit it all in... now, however, towards the end (between 65-70 minutes into it) the mix suddenly is interuppted by a crude digital-type sound. a pop up then says "error code-39 with or in core audio driver"....
what gives here?
I'd appreciate any help you can give.
peace.

does this mean I have to re-record the audio file?
Probably. I guess you could try a commercial disc repair program like TechTool Pro or Disk Warrior, but odds are if the file system can't figure out where the end of file is, the file is hosed --Hang B-(>

Error code 8393f011 with ovi suite 2.2.1.23 when s...

The contacts on the phone can be seen in Ovi, but get the error code 8393f011 when trying to synchronise them.
Although with the messages it works ok.
I use Win 7, so PC Suite 4.88 is not an alternative.
There is maybe a setting in the phone avaible to change or what would solve the above issue? Please help!

I did a reinstall as of /t5/Nokia-Ovi-Suite/can-t-sync-calendar-and-tasks-again-with-Ovi-Suite-2-2-1-123/m-p/776298/highligh...
But have the same error too bad.
My system informations are
Nokia Ovi Suite 2.2.1.23
PC Connectivity Solution 10.33.1.0
Connectivity Cable Driver 7.1.31.0
Nokia Ovi Suite Software Updater 2010.27.0.60741
Maps Service API 4.0.15.0
Nokia mPlatform 2.6.221
Ovi Desktop Sync Engine 1.3.0.32
Operációs rendszer:
Microsoft Windows 7 32 bites kiadás
Nyelv: Magyar
Felismert internetböngészők:
- Microsoft Internet Explorer 8.0.7600.16385 (Alapértelmezett böngésző)
Felismert Bluetooth-verziók:
- Microsoft (Verzió: 6.1.7600, build: 16385), Használatban.
and the device details
V 5.50
03-03-03
NPL-1
(c) NMP
Just noticed that Ovi crashed after the first install:
Forrás
Nokia Ovi Suite 2
Összegzés
Működésképtelenné vált
Dátum
‎2010.‎10.‎19. 10:57
Állapot
Jelentés elküldve
Leírás
A hibát okozó alkalmazás elérési útja: C:\Program Files\Nokia\Nokia Ovi Suite\NokiaOviSuite.exe
Probléma-aláírás
Problémaesemény neve: APPCRASH
Alkalmazásnév: NokiaOviSuite.exe
Alkalmazásverzió: 2.2.1.23
Alkalmazás időbélyegzője: 4c7f4eae
Hiba – modul neve: QtCore4.dll
Hiba – modul verziója: 4.6.1.0
Hiba – modul időbélyegzője: 4b701363
Kivételkód: c0000005
Kivétel – eltolás: 000e9d67
Operációs rendszer verziója: 6.1.7600.2.0.0.256.1
Területibeállítás-azonosító: 1038
További információk 1: 0a9e
További információk 2: 0a9e372d3b4ad19135b953a78882e789
További információk 3: 0a9e
További információk 4: 0a9e372d3b4ad19135b953a78882e789
További adatok a problémáról
Gyűjtőazonosító: 2017763299

Error Code 10 with GPIB PCI Card

PC used: Dell optiplex GX110, lastest Bios release, Windows 2000 SP4, GPIB Drivers version 2.2, Local Admin session.
After having install the driver (without the GPIB)and plug the card, this one is automaticaly recognised by the Os.
But, after the reboot (asked by the OS to validate the installation), the GPIB card appears, in the device manager, with an error code 10 (not started)....
I tried with two (new) differents GPIB PCI Card, two OS (First time with NT4.0 SP6 Drivers 1.7 and now, Win2000 SP4 Drivers 2.2) and with two PCs Dell Optiplex GX110 !
I even tried with a "Ghost" from an other PC (also an Optiplex GX110, with the same model of GPIB Card)
-> I obtain the same error each time !
Help me please..........

Hello,
Could you give me the exact reference of the board (PCI-GPIB, PCI-GPIB+, AT-GPIB, AT/GPIB-TNT...)?
Is the error code displayed on the Windows device manager (in the properties dialog box of the device)?
What is the exact description of the error code?
A PCI-GPIB installation do not need to reboot the OS if the NI-488.2 driver is correctly installed. The board should be recognized in MAX and you must be able to scan for instruments and start I/O communication with the device from test panels in MAX.
Update me as soon as you receive another feedback.
Regards.

Error Code A12E4 with Adobe Application Manager

I have been on the 30 day trial of the Creative Cloud, and have now just signed up for my membership.
I went in to download more apps and check for updates on the ones I already have. No matter what I try to download, it of course opens the Adobe Application Manager as it should, but then the Application Manager tries to update. It then errors out, and this is what I get:
We've encountered the following issues:
Sorry, the program is not responding correctly (Error code: A12E4). For troubleshooting tips, please visti our customer support page.
I am on a Macbook Pro, running 10.8.2
Any help would be greatly appreciated!

Please try reinstalling the Adobe Application Manager from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774.

Error Code 88 with Pixma Pro9500, even when art margins are set correctly

I'm getting error code 88 (from the CanonPro9500 series print monitor window) when attempting to print on an A3Plus art paper (Hahnemuehle William Turner), even though I have the paper size set correctly (in the Photoshop Print Dialog, Print Settings) to "Art A3+(Margin 35)".
(Furthermore – though most of the following options probably have nothing to do with the problem, and are probably the correct or allowable settings anyway – I'm using Canon Color Matching; MediaType: "Fine Art Museum Etching"; Paper Source: Front Tray; PrintQuality: High; and am printing in color, not grayscale. Color Options are all left set at zero.)
I’m printing from Photoshop CS5 Extended,Version 12.0 x64, using an iMac with MacOSX10.6.8. The Canon Printer Driver is “Pro9500 Driver – CUPS Version10.51.2.0”, recently installed (or re-installed) just the other day when I wastrying to deal with this problem (I didn’t check the CUPS version beforereinstalling the driver, so I don’t know if this could be relevant).
(I also attempted to print by setting, in Paper Handling, "Scale to fit paper size", with Destination PaperSize set also to the suggested Art A3+ (Margin 35), although I never had to do this in the past, and so I don't suppose it matters. Still, this did not help.)
I had the same problem attempting to print on an A4 art paper, as one is supposed to do, using front loading and the paper size set to Art A4 (Margin 35), with Media Type set to "Fine Art PremiumMatte" (it was a matte art paper). No go; I got error 88. Iwas able to print on the same sheet by setting "Matte Photo Paper"(while still using Front Loading), but this is not the media type one shoulduse for such a paper.
In the past few years I have printed 8-bit files, in both AdobeRGB and sRGB, on A4 and A3Plus art papers, in both color and grayscale, always using the art margin settings, without any such difficulties. Typically I use Color Management by Printer, or “Canon Color Matching” (though I experimented with the use of dedicated paper profiles and Color Management by Photoshop). Lately I’m trying to print 16-bit files, generally Photoshop PSD or TIFF, with a document profiles of sRGB, AdobeRGB, or ProPhotoRGB. Of course I tried several times to print from an 8-bit file, and once using Color Management by Photoshop, but got error 88 just the same.
Does anyone know how to resolve this problem? Sure hope so! Thanks in advance, AlienAl

Remember that you can set all your paddings in a single setting for a div. It's like a clock, starting in the 12:00 oClock setting, going clock wise.
#myDiv     {
     padding:5px 0 5px 0;
You don't specify a unit with 0 so the above would be the same as:
#myDiv     {
     padding-top:5px;
     padding-right:0;
     padding-bottom:5px;
     padding-left:0;
It works with margins also, etc...
Jim

Error Code 88 with Pixma Pro9500 even with art margins set correctly

I'm getting error code 88 (from the Canon Pro9500 series print monitor window) when attempting to print on an A3Plus art paper (Hahnemuehle William Turner), even though I have the paper size set correctly (in the Photoshop Print Dialog, Print Settings) to "Art A3+ (Margin 35)".
(Furthermore – though most of the following options probably have nothing to do with the problem, and are probably the correct or allowable settings anyway – I'm using Canon Color Matching; Media Type: "Fine Art Museum Etching"; Paper Source: Front Tray; Print Quality: High; and am printing in color, not grayscale. Color Options are all left set at zero.)
I’m printing from Photoshop CS5 Extended, Version 12.0 x64, using an iMac with MacOSX10.6.8. The Canon Printer Driver is “Pro9500 Driver – CUPS Version 10.51.2.0”, recently installed (or re-installed) just the other day when I was trying to deal with this problem (I didn’t check the CUPS version before reinstalling the driver, so I don’t know if this could be relevant).
(I also attempted to print by setting, in Paper Handling, "Scale to fit paper size", with Destination Paper Size set also to the suggested Art A3+ (Margin 35), although I never had to do this in the past, and so I don't suppose it matters. Still, this did not help.)
I had the same problem attempting to print on an A4 art paper, as one is supposed to do, using front loading and the paper size set to Art A4 (Margin 35), with Media Type set to "Fine Art Premium Matte" (it was a matte art paper). No go; I got error 88. I was able to print on the same sheet by setting "Matte Photo Paper" (while still using Front Loading), but this is not the media type one should use for such a paper.
In the past few years I have printed 8-bit files, in both AdobeRGB and sRGB, on A4 and A3Plus art papers, in both color and grayscale, always using the art margin settings, without any such difficulties. Typically I use Color Management by Printer, or “Canon Color Matching” (though I experimented with the use of dedicated paper profiles and Color Management by Photoshop). Lately I’m trying to print 16-bit files, generally Photoshop PSD or TIFF, with a document profiles of sRGB, AdobeRGB, or ProPhotoRGB. Of course I tried several times to print from an 8-bit file, and once using Color Management by Photoshop, but got error 88 just the same.
Does anyone know how to resolve this problem?

I'm getting error code 88 (from the Canon Pro9500 series print monitor window) when attempting to print on an A3Plus art paper (Hahnemuehle William Turner), even though I have the paper size set correctly (in the Photoshop Print Dialog, Print Settings) to "Art A3+ (Margin 35)".
(Furthermore – though most of the following options probably have nothing to do with the problem, and are probably the correct or allowable settings anyway – I'm using Canon Color Matching; Media Type: "Fine Art Museum Etching"; Paper Source: Front Tray; Print Quality: High; and am printing in color, not grayscale. Color Options are all left set at zero.)
I’m printing from Photoshop CS5 Extended, Version 12.0 x64, using an iMac with MacOSX10.6.8. The Canon Printer Driver is “Pro9500 Driver – CUPS Version 10.51.2.0”, recently installed (or re-installed) just the other day when I was trying to deal with this problem (I didn’t check the CUPS version before reinstalling the driver, so I don’t know if this could be relevant).
(I also attempted to print by setting, in Paper Handling, "Scale to fit paper size", with Destination Paper Size set also to the suggested Art A3+ (Margin 35), although I never had to do this in the past, and so I don't suppose it matters. Still, this did not help.)
I had the same problem attempting to print on an A4 art paper, as one is supposed to do, using front loading and the paper size set to Art A4 (Margin 35), with Media Type set to "Fine Art Premium Matte" (it was a matte art paper). No go; I got error 88. I was able to print on the same sheet by setting "Matte Photo Paper" (while still using Front Loading), but this is not the media type one should use for such a paper.
In the past few years I have printed 8-bit files, in both AdobeRGB and sRGB, on A4 and A3Plus art papers, in both color and grayscale, always using the art margin settings, without any such difficulties. Typically I use Color Management by Printer, or “Canon Color Matching” (though I experimented with the use of dedicated paper profiles and Color Management by Photoshop). Lately I’m trying to print 16-bit files, generally Photoshop PSD or TIFF, with a document profiles of sRGB, AdobeRGB, or ProPhotoRGB. Of course I tried several times to print from an 8-bit file, and once using Color Management by Photoshop, but got error 88 just the same.
Does anyone know how to resolve this problem?

I keep getting error code 3 with a fresh sync using AUSST. Help please.

The tool tells me the folder exists at the given path, so i'm using the command correctly.
It's a Windows server, the path is not local to the server, but is set up as the host folder in IIS 7. I can access the website i created for this, and can see the "updates" and further folders that i have created.
I get error code 3 when trying to synchronise, and all it does is delete the folder specified as root.
I run the command like this:
adobeupdateserversetuptool.exe --root="\\server\share\adobe\updates\cc"
then choose option 1 on the menu, which is "fresh synchronisation".
Your choice: 1
Fresh Synchronization chosen.
Folder exists at given root path! All the contents of the folder will be deleted
Enter 'Y' to continue or any other key to exit: y
Could not access the specified path.
AdobeUpdateServerSetupTool returned with code: 3.
"everyone" and "domain computers" has been granted full access to the folder in question, and security inheritance is on.
Any ideas?

I have got past the error code 3, but now I get error code 4...

Error Code 21 with iPod Touch

Hello, I recently registered my iPod Touch's UDID, and of course tried out iOS 7. But wanting to go back to iOS 6 for stability I restored to the ipsw, but when I did it went into a recovery loop, so since iTunes didn't seem to be able to fix it I used redsn0w to get out of the loop. But now with iOS 7 beta 6, which is supposed to be more stable, I figured I'd give it another chance and upgrade again. But, whether I try to restore into iOS 7 or do an upgrade, it gives me and error code 21 and goes into that recovery loop. Just for clarification I have an iPod Touch 5th generation, windows 7 ultimate, avast antivirus (error code 21 supposedly is related to anitvirus), and the most recent iTunes as of right now. Any help or ideas is appreciated, thanks!

Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
You say you have iOS 7. If you are a developer you have access to the private OS 7 developer's forum
iOS 7 Developer forum- Apple Developer
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Error code -88708 with DAQmx Create Channel (AI-Voltage-Basic)

Hi,
I am trying to construct a VI that moves a piezoelectric stage, the VI then needs to scan voltages from the DAQ card to build up arrays of the voltage and coordinates before constructing a 3D graph.
The VI successfully moves the stage and reads the position back to me but when it tries to scan voltages from the DAQ it fails (I'm using the DAQmx Create Channel (AI-Voltage-Basic).vi example, as this has been used in a previous, similar (and successful) VI within my department.)
I get the following error code:
Error -88708 occurred at DAQmx Create Channel (AI-Voltage-Basic).vi
Possible reason(s):
The specified resource is not available. The operation could not be completed as specified.
Task Name: _unnamedTask<1>
Any help on this would be appreciated - I'm fairly new to LabView and am at a loss with how to fix this!
Thanks
-Tom

Is this working when you restart the computer? It might be that the recources are still recerved because the Clear Task.vi wasn't executed (either it`s not present or you did use the abort button).
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

Error Code 8003 with empty trash command

I am trying to empty trash and getting an error code -8003. I have deleted some very large iphot folders to free up disk space after moving them to a detached drive. To complete the task, I am trying to empty trash. After about 30 seconds, I get an error code - 8003.
"The operation can't be completed because an unexpected error occurred (error code -8003)."

Hey BY366,
Thanks for the question. I understand you are having issues emptying the Trash in Mac OS X 10.6.8. The following article may help to resolve your issue:
You can't empty the Trash or move a file to the Trash
http://support.apple.com/kb/HT1526
If the above steps do not resolve your issue, see the section titled “Emptying the Trash” in the following resource. Please note that the steps outlined in this resource are highly advanced, and must be executed with caution. Typographical error or misuse of the "rm -rf" command can result in data loss. Insertion of a space in the wrong place could result in the complete deletion of data on your hard disk, for example.
Troubleshooting permissions issues in Mac OS X
http://support.apple.com/kb/HT2963
Thanks,
Matt M.

Error code -36 with FAT 32 USB Flash Drive

When copying files from my hard drive to a FAT32 formatted USB flash drive I keep getting error code -36 errors. I reformatted the flash drive to Mac OS Extended and the files copied fine. I formatted it back to FAT32 and the error returned. I need to use this drive with PC computers at school and can't leave it in the Mac format. Anyone know of a solution to this problem. It didn't do it with my G4 powermac and OS 10.4 but does with the mac mini with 10.6.

This is a problem I've been dealing with since getting a new Macbook for christmas. In my case I use a Macbook with 10.6.2 at home, networked to a winxp computer, also use FAT formatted USB sticks for backups and taking files to work....and at work I use a mix of winxp machines and older macs running 10.3 and 10.4. I move files around between them all the time, and have had this annoying error -36 file copying problem with the 10.6.2 macbook since day 1.
I did read about the dot_clean solution, and it does seem to work....sometimes. But the problem ISN'T just when copying a folder full of files. I also have the situation where I work on files in InDesign, and then export a PDF directly to the desktop. I then try to copy that ONE pdf file from the desktop to a FAT USB stick OR to an internet-accessed Appleshare volume, and I will get the dreaded error -36. MOST of the time when I get the error on a single file like this, it did actually copy and is useable on the USB stick / Appleshare volume and I can ignore the error. But sometimes not. Either way, it does show that the problem isn't just with folders of files, or even with the situation of copying a file from mac to windows to mac and then getting the error the next time you try to copy it to a win formatted volume.....you CAN get the error with an individual, just-created file in 10.6.2.
I sure wish Apple would fix this already!

Error Code -36 with GarageBand '08 v4.1(236) using Plantronics headset

Following the upgrade from Leopard 10.5 to 10.5.1, we are now getting Error Code -36 Core Audio errors when using the Plantronics DSP-500 headset on GarageBand '08 v4.1 (236). The same error also appears when using a Plantronics DSP-100 headset. Using iMac's built-in audio works fine. Usage of the Plantronics headset worked fine prior to upgrading Leopard to v10.5.1. We have applied the iLife 8.1.1 and GarageBand 4.1 updates. The Error Code pops up during recording. Any ideas on what we should do to get the Plantronics DSP-500 headset to work again with GarageBand??

The Disk Utility did complete repairs in about 1 hour. There were warning messages. I reran the DU and the results are as follows:
*Repairing permissions for “Macintosh HD”*
*Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.*
*Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.*
*Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.*
*Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.*
*Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.*
*Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.*
*Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.*
*Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.*
*Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.*
*Permissions repair complete*
Are there follow up actions that I need to pay attention to?

Help! error code 8 with Adobe premier cs4 and OpenGl

hey there,
i've been trying to work with adobe premier cs4 on my new Thinkpad w520 (i7 2720, 8GB, Nvidia quadro 1000m)
i keep getting this error messege regarding the OpenGl (error code #8) that lost connection with the display driver, after that its automaticly shutting down premier.
nvidia representive suggested me to download an old driver (268.71) instead of the latest one, still wouldn't solve the problam.
can anyone help me with that issue!?
jonny

hey jonygeron,
if you uninstall the current graphic driver , let windows install its generic driver .. can you get Premier CS4 to work ?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Blu-Ray Error Code 0 with BD-RE CS4

I have been using a BD-RE as a test run disk and I have rewritten
to it about 4 times from Encore 4.
Blu-Ray Error " ",Code:"0"0, Note:"
I get the above error now when I try to burn to the BD-RE, but I can
burn BD-R with no trouble. I think the disk got corrupted in some way. I have been extra careful
when handling the disk because I wanted it to last alot longer than 4 burns. I have been checking the box for "Auto Erase Rewriteable disk". I did a quick erase with some software that came with my LG internal BD burner. The other software says that the disk is empty. I still get the error from encore, though.
Anybody know what's happening?

I've experienced Encore evaluation is quite approximative.
This is not a problem, if you know it.
An almost 22Gb file could reach the BD-R size limit (although it is 25) .
Usually, I stay bit down to this value.
Anyway I do not know what Err 0 means, 'cause an "extraload" should be displayed as "too big for media" or something like this.
This is what happens in my italian Encore when I exceed.
I've also experienced, times ago, that a BD-RE (Kraun, if I remember correctly) had a smaller size compared with a BD-R one.
With the same project, I was able to burn a BD-R and not the BD-RE.
Anyway, when you'll do the image, remember to check this is a BD-RE image and not a BD-R (bottom of the window).
Ciao
Giorgio

Error code 15 with pda program

Similar Messages

Maybe you are looking for