ERROR CODE: 16 HELP!

I just got an ERROR CODE 16
I tried doing the GET INFO, permissions reset.
Didn't work, still getting the ERROR CODE on ALL my adobe creative suite 5 applications.
I run a MAC Macbook Pro Retina
Yosemite 10.10.2
Please help me avoid having to go through the steps of REINSTALL.

NOOOOOO!!!!
Thank YOU, for:
Immediately responding and knowledgibly resolving my problem with ZERO
GRIEF to me!
I value that more than you can appreciate!!
Have a great day!!
Art

Similar Messages

Inquiring minds may find this error code helpful: 0x207

Hopefully I'm asking this in the right forum. I just downloaded the update for Microsoft Remote Desktop for Windows Phone 8.1 (I am actually running Denim on a 1520 but that may not matter). The version is 8.1.8.13 released 3/4/2015. I am trying to connect
to a RemoteApp application but I am receiving the following error message shortly after it tries the redirection process (I think it fails at the securing remote connection part after it attemps the redirction to the RemoteApp application collection server):
Connection error
We couldn't connect to the remote PC. This might be due to an expired password. If this keeps happening, ask your admin or tech support for help.
Inquiring minds may find this error code helpful: 0x207
I am able to connect directly to both the broker server as well as the RemoteApp collection server with this application with the same credentials and am only experiencing this when trying to connect to a RemoteApp application.
We are running Server 2012 R2 for both the broker/web and the collection servers. We are not using a gateway server as we use an SSL VPN concentrator instead for access outside of our network. We have server farms set up as well in the RemoteApp topology.
Any info would help or let me know if I'm not posting in the right forum for this issue. I know this is a very recent release so I'm trying to figure out if I should wait for a bug fix or if there's something that I can do on my end.
Thank you in advance for your time!

Hi Scott,
Please check your configuration once again and the certificate must be well configured. Also for accessing RemoteApp there might be the permission issue for your use, recheck once and verify. You can also got through
this article for information.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I just had to buy a new computer because my "vintage" Mac died. after migrating my backup drive over my Adobe creative suite no longer wroks I get a 150:30 error code HELP!

I just had to buy a new computer because my "vintage" Mac died. After migrating my backup drive over to my New mac book my Adobe CS no longer works. I get a 150:30 error code HELP!

You need to reinstall it properly, not use migration.
Mylenium

OSX DVD/CD Burner Error Code - HELP!

Hey everyone. I hope someone might be able to help me out with a problem I am having.
I just purchased a Plextor DVD/CD burner, and every time I put a blank in it, it gives me an error code (0x80020025). I thought it just might be my burner, but I tried to burn a disc with my buddy's Lacie, and had the same issue. The drive reads all discs fine, it just won't let me set it up to burn one.
Can anyone help, please?! Thank you all so much.

The drive is an external drive. It is a Plextor PX-740UF. I am running it with USB. Just to let you know, I had the same issue with my buddy's Lacie drive when I plugged it in.
The drive recognizes everything BUT unburned discs. When I put one in and I try to open it in Finder, or in iTunes, it gives me that error code.
I have also tried to do the force quit from Finder, and then re-launching, but this doesn't help either.
Thanks for your help.

Trying to use Airport Extree in Time Capsule nned error code help

I am a log time apple supporter but I have been messing with this since last night trying to get the @^#&# thing to work. I got conencted erlier to the internet now when i come back from dinner i can;t connect and and i get error code 6765. Earlier i got a message somethinga bout a bios but i did nto write it downa nd now can;t get it to produce it.
Can;t they ever make anything that works the first time out of box for us older non techy guys.
HELP
Dan

Thank you for your quick answer, smorkerz. However, I did it and it doesn't work.
I tried to check separately the time capsule and the airport extreme, switching one off when using the other one. The result is that each one works alone but when I use them both, just time capsule appears, works well, and I can't use the airport to print for instance.
Do you understand anything ?

Internal Update Server Error Code help

Error code in FlashInstall.log
[warning] 1407 12044 vs [warning] 1403 12030
I am trying to figure out why my internal update server wont connect past the certificate handshake. I can get it to work with a self signed certificate from the machine name but am trying to build a solution for my whole organization using our Root CA with a custom name for the particuler site.
Any information would be helpful or suggestion for an alternative to using the internal update server since it is near impossible to troubleshoot when i have no idea what these warning codes mean.
Thanks,
Xenon

Now i am getting these in my log but no update is being applied.
2013-10-10+17-32-25.523 [info] 1628 adobeupdate.domain.net
2013-10-10+17-32-25.527 [info] 1629 adobeupdate.domain.net
2013-10-10+17-32-25.530 [info] 1614
2013-10-10+17-32-25.534 [info] 1615
2013-10-10+17-32-25.537 [info] 1618
2013-10-10+17-32-25.542 [info] 1608
2013-10-10+17-32-25.546 [info] 1612
2013-10-10+17-32-25.550 [info] 1620
2013-10-10+17-33-8.143 [info] 1628 adobeupdate.domain.net
2013-10-10+17-33-8.147 [info] 1629 adobeupdate.domain.net
2013-10-10+17-33-8.151 [info] 1614
2013-10-10+17-33-8.154 [info] 1615
2013-10-10+17-33-8.157 [info] 1618
2013-10-10+17-33-8.162 [info] 1608
2013-10-10+17-33-8.166 [info] 1612
2013-10-10+17-33-8.171 [info] 1620
2013-10-10+17-33-9.762 [info] 1628 adobeupdate.domain.net
2013-10-10+17-33-9.767 [info] 1629 adobeupdate.domain.net
2013-10-10+17-33-9.771 [info] 1614
2013-10-10+17-33-9.774 [info] 1615
2013-10-10+17-33-9.778 [info] 1618
2013-10-10+17-33-9.782 [info] 1608
2013-10-10+17-33-9.786 [info] 1612
2013-10-10+17-33-9.790 [info] 1620
2013-10-10+17-33-11.84 [info] 1628 adobeupdate.domain.net
2013-10-10+17-33-11.88 [info] 1629 adobeupdate.domain.net
2013-10-10+17-33-11.91 [info] 1614
2013-10-10+17-33-11.94 [info] 1615
2013-10-10+17-33-11.98 [info] 1618
2013-10-10+17-33-11.102 [info] 1608
2013-10-10+17-33-11.106 [info] 1612
2013-10-10+17-33-11.123 [info] 1620

ERROR CODE HELP

Hello everytime I try tpo restore my Iphone after the new update I keep getting this error code:
A Error occurred while restoring this Iphone (-20)
Itunes could not restore the IPhone (the name) because the backup was corrupt or not compaitable with the I phone that is being restored...
I need all of my things I have no contacts notes or anyting.
Please help.

I'd suggest a clean re-install of iTunes & related applications:
Go into Control Panel > Add/Remove Programs
Remove these applications:
1. Apple Software Update
2. Apple Mobile Device Support
3. iPod for Windows (this may or may not exist, either way, it's not needed so we can remove it)
4. iTunes
5. QuickTime
Restart the computer
Download & Install the Windows Installer Cleanup Utility:
http://support.microsoft.com/kb/290301/
Launch the Utility: Start > Programs > Windows Install Clean Up
Select any of the above mentioned applications, and click Remove
Restart the computer again
Download & install iTunes again from here: http://www.apple.com/itunes/download/
CG

Blue Screen and Error code help

I got up for a few moments then come back to see my computer Blue Screened, first time ever for me. Its running win XP and is roughly 1 1\2 years old and i have no idea what even caused the blue screen much less how to fix it so it wont happen again
The error code
c:\DOCUME~1\0\Owner\Locals~1\Temp\WER309f.dir00\Mini072409-01.dmp
c:\DOCUME~1\0\Owner\Locals~1\Temp\WER309f.dir00\sysdata.xml
BCCode 10000007e
BCP1 C00000005
BCP2 000000000
BCP3 EDEDDBB8
BCP4 EDEDD8B4
OSVer 5_1_2600
SP 2_0
Product 256_1

Not 100% sure without looking at it honestly. If it happens again I would take it in to your local store for a diagnostic.
Adam
Best Buy Community - Retail, Americas
Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
*Remember to mark your questions solved and click the star under the user's name to show your thanks!

PowerMac G4 Dual Optical [Error Code Help]

[IMG]http://img251.imageshack.us/img251/8568/powermacg4mdd300x363.jpg[/IMG]
I recently got rid of my old PowerMac G4 Dual Optical.
It was a solid machine, never broke down, as I constantly maintained it for about 8 years, I only upgraded due to Intel (and some new apps I wanted to use).
Fortunately, I found a good home for it, and I told the guy, what to do to maintain it, and to call me if he has an issue.
Anyways, low and behold he now has an issue, in the form of a Error Code when he turns the machine on (See below).
I've spoke to him over the phone, and walked him through resetting the Pram, and reinstalling the disks (start up and boot from the disk, while holding down cmd+C), but no joy.
He said: "I managed to get onto the desktop again today but again it crashed with in a minute of being on it. It came up with the error message unable to find driver so I copied it down"
Personally I think the internal Hard Drive has gone and needs to be replaced, but I could be wrong.
If somebody can somebody please shed some light on this, as I'd be very grateful.
Cheers,
K.
panic(cpu 0 caller 0x00373A34): “Unable to find driver for this platform: \”PowerMac3,6\”.\n”@/SourceCache/xnu/xnu-1228.15.4/iokit/kernel/IOPlatformExper t.cpp:1407
Latest stack backtrace fo cpu 0:
Backtrace:
0x009CC88 0x0009D63C 0x00029DA0 0x00373A34 0x00348ED8 0x0034A02C 0x0034BEDC 0x0034AFFC 0x000B1DD4
Proceeding back via exception chain:
Exception state (sv=0xc8ca00)
PC=0x00000000; MSR=0x0000D030; DAR 0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: Unknown
Mac OS version:
Not yet set
Kernel version
Dawrwin Kernel Version 9.8.0: Wed Jul 15 16:57:01 PDT 2—9; root:xnu-1228.15.4~1/RELEASE_PPC
System uptime in nanoseconds: 18699638756
No debugger configured – dumping debug information
MSR=00001030
Latest stack backtrace for cpu 0:
Backtrace:
0x0009CC88 0x0009D7A8 0x00029DA0 0x00373A34 0x00348ED8 0x0034A02C 0x0034BEDC 0x0034AFFC 0x00B1DD4
Proceeding back via exception chain:
exception state (sv=0xc8ca00)
PC=0x00000000; MSR=0x0000D030; DAR 0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread:Unknown
panic: We are hanging here…

Try a PMU reset.
DALE

REALLY bizarre - 10210 stopped - replaced w/an 10810 error code - HELP?

Absolutely BIZARRO! So frustrating - I have done everything except re-install SL - am reluctant to do that as I do not want to mess up BootCamp - I use AutoCAD extensively in my work - so need to run XP....
The 10210 error message stopped - was replaced by 10810 message code - exact same results/process - system will not allow the initiation of a new program - must re-boot.....
How come Apple is so MADDENINGLY non-involved in this question? It's plain not fair....
GRRRRR!

Clearly, I'm seen as a 'village idiot' in this pursuit......if I logged the HOURS of Google searches/hits I've chased down, and the myriad suggestions/solutions I HAVE followed up on - all to NO avail, you would be astounded.
There is little else I can tell you about the problem....system just goes into 'lockdown' at an indeterminable point - I can continue with open programmes, but whenever I attempt to initiate a new program, it generates the message/code.......It is baffling to me that Apple has not seen fit to address this issue......based on all the message traffic out there, many, many others have the same issue - with no known solution as yet.
If it helps, my system is a MacPro (2008), 6Gb RAM, 2.5 Tb HD space, an Apple Cinema Screen monitor + an HP 24" 2nd monitor....don't know what else I can tell you. BTW - if I'm in XP under Vmware, or in Bootcamp, no such problem occurs in the Windows environment.

Internal error code, ora-00600,inforrmatica

hi
while running the session we are getting a error , internal error code
help us out.

Hi,
I had the same problem, I think that error is related to bitmap indexes, check if the involved table have this kind of indexes.
I fixed the problem by recreating the table and indexes.
Regards

TS3694 what is error code 1015 trying to restore but keeps coming up with this code

what is error code 1015 trying to restore phone keeps saying in recovery but keeps coming up with this error code help please

Are you trying to downgrade your iPhone?
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
(from iTunes: Specific update-and-restore error messages and advanced troubleshooting)
If not, try to move or delete the IPSW file and let iTunes download it again.
Rename, move, or delete the iOS software file (.ipsw)
iTunes uses "ipsw" files to restore your device. If those files are unusable, then try deleting them, renaming them, or moving the file to a different directory. This will cause iTunes to download a new copy of the IPSW. When a restore issue is specific to a user, it is likely due to an unusable .ipsw file. If removing the .ipsw file does not resolve a user-specific restore issue, then the issue is caused by other user-specific security software settings or iTunes preferences. Creating a new user will also cause new .ipsw restore files to be downloaded in the new user. You can find the ".ipsw" files in these locations:
Mac OS X
iPhone
~/Library/iTunes/iPhone Software Updates
iPad
~/Library/iTunes/iPad Software Updates
iPod touch
~/Library/iTunes/iPod Software Updates
Note: The tilde "~" represents your Home directory.
Windows XP
iPhone
C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Software Updates
iPad
C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPad Software Updates
iPod touch
C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPod Software Updates
Note: To quickly access the Application Data folder, click Start, and then choose Run. Type %appdata% and click OK.
Windows 7 and Vista
iPhone
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
iPad
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPad Software Updates
iPod touch
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates
Note: To quickly access the AppData folder, click Start, and then in the search bar type %appdata% and press the Return key.

TS1702 what causes this error code - 0xe8000084

when synching my phone, I get the above error message when itunes tries to synch several apps. What causes this and what can I do to correct it?

There if anything on this some troubleshooting page for 0xE8 error codes helps : http://support.apple.com/kb/TS3221

Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help

I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?

Sorry to bother you.
I could find the answer after searching previous posts about this language problem.
Had to change my language in AAM profile and then download PS CS6 again ( english version ).
Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
restart application and Voila.
Greetz, Jeroen

Snow Leopard 'error code 50', 'Low Application memory'. Help.

Hi.
I've been facing **** lot of problems with my MBP of late, and all that I could try have turned unfruitful. I'd appreciate some help.
Problems started when I downloaded and tried to install SL update 10.6.7 on 10.6.6. It was working fine on 10.6.6. The update failed, and I received 'error code 50' very often while deleting files from Trash. Also, 'beach-balling' became more frequent, and I had to force quit applications very often because of 'low application memory' box being displayed.I also encountered the grey screen prompting me to 'press power button till shut down and restart'.
Finally, I tried a clean reinstall but the same problems persisted, and lots of applications stopped working. I could not download files from browser (Low disk space, despite a 100 GB space available on he HD) or save textedit, Office or iWork files. I did a clean reinstall again, with zero-erase option and again downloaded the 10.6.7 combo update. The 'Software Update' application failed. I downloaded the update from my browser and it was installed successfully finally after 4 system restarts, but the 'error code 50' problem still persists.
What am I doing wrong? I've been dealing with this abnormal performance for more than a month. I haven't backed up files because there is no use making a backup of corrupt system. Specs : MBP'09, 13.3". 2.26 GHz, 160 GM, SL 10.6.7.
Please advice.
Regards.

I tried to run the hardware test by inserting the Applications Install dvd and pressing 'D' just after the chime. It did not run. Nevertheless, the App DVD is ejected every time I insert it in to install some apps, like iLife etc. Running Disk Utility dies not work, as it says the 'disk cannot be mounted'.
I tried another clean reinstall of SL 10.6, and some of the funny stuff are :
1. error code 50 yet again
2. It won't allow me take snapshots, saying 'You do not have permission to save snapshots etc.."
3. Safari cannot download files
4. 'Low Application Memory' message box appeared a few times, prompting me to Force Quit Safari.
Could there be something wrong with the Install DVD? Though Disk Utility First Aid shows error free HD verification.

Windows Update Error Code 80072F8F! I Did All The Steps And Will Not Fix Please HELP?

No one seems they can not help me fix this error code I did many things and not one person has really
helped me, I have a question at another forum but all they do is just ask me questions tell me steps to fix this but nothing worked at all, This happened on 8/30/2014 and ever since no one can help me fix this at all....I have no money to pay for the fix...I
am on very very low limited disability income, No credit cards nothing. I need help now I paid a lot of money for my Windows 7 Ultimate and now since 8/30/2014 I got that error code no one has helped me....PLEASE help me please....And I am not sure where to
go for help here thank you. I have done many things but nothing is fixing this issue. please help...And yes I did the clock and clock keeps perfect time, doing that clock did not fix this error code at all...

Hi Angelsims,
First I also want to get more information from you to help us to troubleshhot:
1.Did this error occur on a single update or multiple updates? please also post the update name in issue.
2.Please also post the steps you have followed to fix this issue.
In addition, please try to use the general steps to troubleshoot the windows update issue, and refer to the steps below:
The following outlines how to stop services pertaining to Windows Update, rename system folders, register related DLL files, and then restart the previously mentioned services. This troubleshooting generally applies to all Windows Update related issues.
Stopping services pertaining to Windows Update
1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2.     If you receive a notification from User Account Control simply click Continue.
3.     At the command prompt, type the following, commands and then press ENTER after each command.
        net stop wuauserv
        net stop bits
net stop cryptsvc
Please do not close the Command Prompt window.
Renaming folders pertaining to Windows Update
1.     At the command prompt, type the following commands, and then press Enter after each command:
2.     ren %systemroot%\System32\Catroot2 Catroot2.old
3.     ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
4.     Please do not close the Command Prompt window.
Registering DLL’s pertaining to Windows Update
1.     Please copy and paste the following text into a new Notepad document, and save the file as WindowsUpdate.BAT
2.     If saved correctly the icon will change from a Notepad file to BAT file which has two blue cogs as its     icon.
   -or-
3.     You can manually type each command at the command prompt:
         regsvr32 c:\windows\system32\vbscript.dll /s
         regsvr32 c:\windows\system32\mshtml.dll /s
         regsvr32 c:\windows\system32\msjava.dll /s
         regsvr32 c:\windows\system32\jscript.dll /s
         regsvr32 c:\windows\system32\msxml.dll /s
         regsvr32 c:\windows\system32\actxprxy.dll /s
         regsvr32 c:\windows\system32\shdocvw.dll /s
         regsvr32 wuapi.dll /s
         regsvr32 wuaueng1.dll /s
         regsvr32 wuaueng.dll /s
        regsvr32 wucltui.dll /s
         regsvr32 wups2.dll /s
         regsvr32 wups.dll /s
         regsvr32 wuweb.dll /s
         regsvr32 Softpub.dll /s
        regsvr32 Mssip32.dll /s
         regsvr32 Initpki.dll /s
         regsvr32 softpub.dll /s
         regsvr32 wintrust.dll /s
         regsvr32 initpki.dll /s
        regsvr32 dssenh.dll /s
        regsvr32 rsaenh.dll /s
         regsvr32 gpkcsp.dll /s
         regsvr32 sccbase.dll /s
         regsvr32 slbcsp.dll /s
         regsvr32 cryptdlg.dll /s
         regsvr32 Urlmon.dll /s
         regsvr32 Shdocvw.dll /s
         regsvr32 Msjava.dll /s
         regsvr32 Actxprxy.dll /s
         regsvr32 Oleaut32.dll /s
        regsvr32 Mshtml.dll /s
         regsvr32 msxml.dll /s
         regsvr32 msxml2.dll /s
         regsvr32 msxml3.dll /s
         regsvr32 Browseui.dll /s
         regsvr32 shell32.dll /s
         regsvr32 wuapi.dll /s
         regsvr32 wuaueng.dll /s
         regsvr32 wuaueng1.dll /s
         regsvr32 wucltui.dll /s
         regsvr32 wups.dll /s
         regsvr32 wuweb.dll /s
         regsvr32 jscript.dll /s
         regsvr32 atl.dll /s
         regsvr32 Mssip32.dll /s
Restarting services pertaining to Windows Update
1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2.     If you receive a notification from User Account Control simply click Continue.
3.     At the command prompt, type the following, commands and then
press ENTER after each command.
        net start wuauserv
        net start bits
        net start cryptsvc
   exit
Please try the steps above, if the step failed, please post the error or failure information.
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

ERROR CODE: 16 HELP!

Similar Messages

Maybe you are looking for