Error code 1625 upgrade to windows 8.1. I do not want to upgrade from Windows 7

I am running windows 7 64 bit on HP probook 4440s & recently purchased HP pro mfp m 225dw all in one.
I cannot get wireless printing nor scanning function to work.
When I try to download the drivers directly from HP, I get the error nessage. Any way to work around this glitch?

Trying again & got this alert:
User Account Control Error: This program has been blocked (Printers)

Similar Messages

Error code 0X8007007B when activating windows server 2012

error code 0X8007007B when activating windows server 2012

If your key is for KMS activation it will never activate without the KMS server, make it sure that you have KMS server and your server is reachable to the KMS server. Please see this Kb ARTICLE
http://support.microsoft.com/kb/929826/en-us
http://www.arabitpro.com

Installer LV7.1 - LabVIEW load error code 21: An external subroutine required for execution could not be found.

Bonjour,
Je cherche à créer un installer portatif utilisant les drivers NI-DAQmx 8.7.1 et NI-CAN 2.6.0.
Je dispose d'un code LV 7.1 et j'ai installé l'application builder 7.1.
Mais une fois l'application installé sur un PC vierge de Labview, j'obtiens le message suivant:
load error code 21: An external subroutine required for execution could not be found.
Ce message est répété plusieurs fois (pour différents VIs) puis le programme ne se lance pas.
J'ai bien veillé à installer les drivers NI-CAN et NI-DAQmx correspondant au préalable sur la machine cible.
En chercant sur le forum, plusieurs pistes m'ont été proposé:
La version NI-DAQ
L'intégration du Run time Engine
Un problème de DLL
J'ai vérifié ces 3 points mais cela n'a pas règlé mon problème.
Résolu !
Accéder à la solution.

Bonjour,
Merci de ta réponse.
En fait, j'ai bien inclu le runtime engine de Labview qui était effectivement la source de l'erreur.
L'installation de NI-DAQmx v 8.7.1 provoque la mise à jour de la version du runtime engine (passage de 7.1 à 7.1.1).
J'ai donc désinstallé Le runtime engine 7.1.1 (ce qui a provoqué la désinstallation de labview et NI-DAQ).
Puis je suis passé par une version plus ancienne de NI-DAQ (7.2) que j'ai adapté (inclusions de DLL et de VIs).
Les messages d'erreurs ont alors tout simplement disparus!

Wish to fix an error code after upgrading Microsoft Office 2007

I just recently upgraded to MS Office 2007, but every time I launch Microsoft Outlook, I get this error code: The Add-in "ACT! Extensions" (C:\WINDOWS\system32\Act9Ext.dll) cannot be loaded and has been disabled by Outlook. Then goes on to advise me to contact the Add-in manufacturer for an update or uninstall the add-in.
I no longer have that specific version of ACT on my computer, but obviously I still have that extension and I am unable to find it.
I will appreciate if someone is able to help me to correct this error.
Thank you,
Solved!
Go to Solution.

I googled your error and this is what came up.
http://help.lockergnome.com/office/remove-reference-Outlook-Add-ftopict996422.html
and
http://help.wugnet.com/office/Add-error-ftopict1063593.html
Message Edited by CSX on 11-22-2008 02:05 PM
Ignorance is no excuse!

Windows 10 Error code: 0x80070570 at 68% "windows cannot install required files"

Trying to do a clean install from a USB flash drive and DVD. Same error each time at same location. (68%) I have removed all USB devices, Ran chkdsk and updated firmware on SSD.
Asus Sabertooth P67 BIOS 3602
i7-2600k 3.4GHz
24GB ram DDR3
500G SSD OCZ Vortex Sata 3
"Windows cannot install required files. The file may be corrupt or missing. Make Sure all files required for installation are available, and restart the installation.
Error code: 0x80070570"

Hi Covered,
Glad that you have resolved this issue.
Have a nice day!
Regards,
Alex Zhao
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Error Code 800F0902 on several Windows 7 64 bit updates

When I install the updates suggested by windows 7, several updates does not install. Error code: 800F0902. I am running Windows 7 64 bits. Some of the updates that failed to install are Security Related, but some not.
Any Help?
Thanks

Hi,
Please make sure you are running IE. Through Tools->Windows Updates, it will work smoothly.
If still no go, navigate to folder %windir%\SoftwareDistribution and rename the SoftwareDistribution to SoftwareDistribution.old.
Hope it helps.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Error code 80070308 for all windows update

Hi,
I'm unable to install any kind of update. The install finishes with the following message : Unknown error code 80070308.
My system info is as follows:
OS: win7 Pro 32-bit, downloaded from ms website
Processor: AMD Athlon XP2400+ @ 2.66 GHz
RAM: 1GB
I already saw this similar topic "VPC7 install failure: Prior to restart " but there is no solution.
Thanks !

Hi Deguich,
Generally, the Windows Update issue can be caused by one of the following factors:
1. The Windows Update service has been stopped.
2. Corrupted Windows Update Temporary folder.
In order to narrow down the cause of this issue and resolve it, I suggest you refer to the following steps. After finishing each step, you can check the result again.
NOTE: Some third party programs can affect the Windows Update service. If you are running any third party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection), security or anti-virus programs (Norton, McAfee, etc.), I recommend we temporarily disable or shut them down and then try accessing Windows Update later. Please understand that we are disabling these programs only for the purpose of troubleshooting and we can re-enable these programs after we finish troubleshooting.
Step 1: Verify the relevant Windows Update services
================================
1. Click the "Start" Button, in “Search" bar, type: "services.msc" (without quotes) and press Enter. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
2. Double click the service "Windows Update".
3. Click on the "General" tab; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the "Start" button under "Service Status" to start the service.
4. Please repeat the above steps with the "Background Intelligent Transfer Service" service.
You can also temporarily stop these services, restart the computer, and then start these services again. If any service is missing or cannot be stopped or restarted, please let me know.
Step 2: Rename the Windows Update Softwaredistribution folder
================================
This problem may occur if the Windows Update Software distribution folder has been corrupted. We can refer to the following steps to rename this folder. Please note that the folder will be re-created the next time we visit the Windows Update site.
1. Close all the open windows.
2. Click the "Start" Button, click "All programs", and click "Accessories".
3. Right-click "Command Prompt", and click "Run as administrator".
4. In "Administrator: Command Prompt" window, type in "net stop WuAuServ" (without the quotes) and press Enter.
Note: Please look at the cmd window and make sure it says that it was successfully stopped before we try to rename the folder. However, if it fails, please let me know before performing any further steps and include any error messages you may have received when it failed.
5. Click the Start Button, in the “Search" bar, type in "%windir%" (without the quotes) and press Enter.
6. In the opened folder, look for the folder named "SoftwareDistribution".
7. Right-click on the folder, select Rename and type "SDold" (without the quotes) to rename this folder.
8. While still in the "Administrator: Command Prompt" window, type the command "net start WuAuServ" (without the quotes) in the opened window to restart the Windows Updates service.
Note: Please look at the cmd window and make sure it says that it was successfully started. However, if it failed, please let me know before performing any further steps and include any error messages you may have received when it failed.
If the issue persists, would you please upload the following information to SkyDrive and provide us the link for analyzing?
How to capture a screenshot
================================
1. Press the Print Screen key (PrtScn) on your keyboard.
2. Click the "Start" Button, type "mspaint" in the Search Bar and Press Enter.
3. In the Paint program, click the "Edit" menu, click "Paste". Then click the "File" menu, and click "Save".
4. The "Save As" dialogue box will appear. Type a file name in the "File name:" box, for example: "screenshot".
5. Make sure "JPEG (*.JPG;*.JPEG;*.JPE;*.JFIF)" is selected in the "Save as type" box, click "Desktop" on the left pane and then click "Save".
How to collect the System Information
================================
The System Information can provide us with more information about the current status of the system. I would like to check it for you. Please send it to me using the following steps:
1. Click the "Start" Button, type "MSINFO32" in the Search Bar and press Enter to start System Information.
2. On the popup window, on the menu bar, click "File", and click "Save", type a file name and then choose NFO as "Save as type", click "Desktop" on the left pane, and click Save.
How to collect the WindowsUpdate.log file
================================
1. Click the "Start" Button, type "WindowsUpdate.log" (without the quotes) in the Search Bar and Press Enter. We will see a file named "WindowsUpdate.log"
2. Now click on the "File" menu and then click on the "Save As".
3. From the left panel, click "Desktop" and click the Save button.
Arthur Li - MSFT

Error code 0x8007007B when activating windows 8 Ent

I get an error message saying "Windows can't activate right now." Error Code: 0x8007007B

Try this one to change the product key without first activating Windows. Use one of the following methods:
Method 1
Swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click Search.
In the search box, type Slui.exe 0x3.
Tap or click the Slui.exe 0x3 icon.
Type your product key in the Windows Activation window, and then click Activate.
Method 2
Run the following command at an elevated command prompt:
Cscript.exe %windir%\system32\slmgr.vbs /ipk <var><Your product key></var>
Note You can also use the Volume Activation Management Tool (VAMT) 3.0 to change the product key remotely, or if you
want to change the product key on multiple computers.

Error code on app store windows 8.1

Since I installed Windows 8.1, because I had to reset my computer, I can't install apps anymore because of an error. I don't know how to fix, help please...
Error code: 0x80070241

Hello,
I'm sorry that you are having this problem. This forum is for Windows Store and Phone developer related questions. You may want to review this
Answers thread for further assistance.
Thanks!
-Jonathan
Windows and Windows Phone Dev Center Support
Office Store Developer Support
Send us your feedback about the Windows Platform

Getting error code 0xC0000005 while installing windows 8.1 x64

Please help me..
I am getting error code 0xC0000005 while installing fresh copy of windows 8.1 x64
When the installation process arrives at 87% every time I get the error code saying that installation can not be done.
I can not install windows 8.1 x64 version on my laptop.
please tell me how to solve the problem and install windows 8.1 x64 version on my laptop.
I tried with dvd-rom and usb as well, but the result is same..just stuck at 87%...can not be installed....
how to overcome it...please...
This question was solved.
View Solution.

Hi there @Achintya-only
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I see that you are getting an error code, when you try to install Windows 8.1 from USB or DVD. I am happy to assist.
Just to clarify, you are using a standalone Windows installation disk, you are not using a factory recovery image. Is that correct?
Have you run the hardware diagnostics on your notebook? HP Notebook PCs - Testing for Hardware Failures (Windows 8)
What operating system was on the system before, and have you made a set of recovery media, for your original factory installation?
Please let me know what you find.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Z T-Codes. Upgrading from 4.6 to ECC6.0

Hello All,
We are upgrading from 4.7 to ECC 6.0. I want to know if am not going to enable the GUI Support(SAP GUI for HTML, SAP GUI for JAVA & SAP GUI for Windows ) in ECC for Custom tranction Codes what would be the impact on the ECC System?.
Thanks in Advance
Santu.

Hi santi4u,
You will get number of types of errors as ECC 6.0 is highly dependent on other non - SAP applications like HTML,Java etc.
It will tremendously affect the functionality.
Hence it is better not to do it.
Harish

Error 1015 when upgrading from 3.0 to 3.0.1

Hello,
I recently purchased an iPhone and my first time connecting it to iTunes it asked to upgrade from 3.0 to 3.0.1, which I assumed was fairly standard so I let it go.
However, it made it about 75% through the progress bar on the iPhone display and to the "restoring iPhone firmware" stage in iTunes, then it gave the 1015 error. I have tried it on several computers since then and it happens every time regardless of which computer/OS I use.
After this every time I turn the iphone on, connect to the computer or not, it displays a USB with an arrow to the iTunes icon, and I have no control. Basically nothing on it works anymore.
When I searched on google I found a lot of hits for people trying to downgrade/jailbreak, neither of which I was trying to do, I was simply upgrading based on iTunes request.
Thanks for any help, right now my iPhone is useless to me, and it's really frustrating.
Thanks,
Boyd

I just got this link off Apple Support. It is a KB article that describes issues with that particular error code. Try and see if that solves your problem.
http://support.apple.com/kb/TS1275

Error during MaxDB upgrade from 7.3.00.42 to 7.5.00.32

Hello all,
I am attempting to upgrade from MaxDB 7.3.00.42 to 7.5.00.32, as part of a migration from HP-UX 11.11 to Windows Server 2003. The MaxDB database supports a Content Server 6.30 application, and from what I have found so far, I need to upgrade/patch to 7.5.00.51 on the HP-UX server, before I can migrate using the loadercli (as per note 962019).
While performing the upgrade to 7.5.00.32 (following the steps in the Upgrade Guide to MaxDB 7.5), I receive the following error.
chperm 660 sdb:sdba /sapdb/data/config/SDB.mmm
user sdb can access /sapdb/data/config/SDB.mmm
remove /sapdb/data/wrk/dbmsrv.prt
remove /sapdb/data/wrk/SDB.knl
remove /sapdb/data/wrk/SDB.mdf
permissions for databases as of version 7.5.00 are used on your system
database owner is sdb
administrators group is sdba
owner of SDB is sdb (sdba sdba)
user_logon failed
Obviously there is a permissions problem of some kind, but I have not been able to pinpoint where. I allowed the DDUPDATE.SH script to create the user SDB, and it appears to have been created successfully and was used during the earlier steps of the upgrade script.
While working with SAP support I confirmed that I could connect to the database using the SDB user and I also executed the sdbverify, which completed successfully. As per the upgrade guide, I am logged in to HP-UX as root when running the upgrade (and when I ran sdbverify).
If anyone has suggestions on the cause of this error, I would greatly appreciate any assistance.
Best Regards,
Rusty Robbins

Isn't that how it always goes...
I have been fighting this for 4-5 days, and had replied back and forth with support, with no luck on a resolution. But of course just as soon as I post my question here, support comes back with the answer!. I guess that just goes to show how good the SDN site is! ;p
Anyway, the answer to my problem was related to the group permissions on this HP-UX server. The ddupdate script did create the SDB user and set the primary group as SDBA, which normally would give the SDB user all rights for that group. However, in this case the error continued to occur, until I explicitly added the user SDB to group SDBA (at the request of SAP support). This upgrade step did finish successfully, and I am now continuing on with the other steps to migrate to Windows. Hopefully the rest of the steps will go smoother...
Regards,
Rusty Robbins

Error after SPS upgrade from SP10 to SP12

Hi Friends,
Recently we have done SOLMAN 7.1 sp upgrade from sp10 to sp12.
Now I want to perform configuration activities in SOLMAN_SETUP.
But when I am trying to do SYSTEM PREPARATION, I am facing error in first step(Maintain Users).
"Error: Number of elements in the collection of node COMPONENT CONTROLLER.1.NAMESPACES violates the carnality".
Kindly suggest me how to clear this above error and proceed further. Further please let me know as a SOLUTION MANAGER consultant what are the steps I need to perform post SP upgrade. I am not BASIS guy. So please let me know what are the activities which need to be performed by BASIS guy and SOLMAN guy
Please find the attached screen shot for the error screen.
Thanks & Regards,
Solman Starter

Go the transaction STMS, if a window appears when you start the transaction that's mean it is not configured.
Only in this case :
1.     Logon on to client 000 with DDIC.
2.     Execute transaction SE06
3.     Select the Database Copy or migration option
4.     Press the Post-installation Processing button.
5.     When prompted Do you want to re-install the CTS? Press the Yes button
6.     When prompted for the Source System of Database Copy?, make sure that the <SID> of the production system is selected. Press the checkmark button to continue.
7.     When prompted Change originals from PRD to QUA?, press the Yes button
8.     When prompted Delete TMS Configuration?, press the Yes button
9.     When prompted Delete old TMS configuration?, press the Yes button
10.     When prompted Delete Old Versions of transport routes?, press the No button
Concerning the initial problem, i found this note :
http://service.sap.com/sap/support/notes/2025884

I'm trying to delete files from and external disk and i get this: The operation can't be completed because an unexpected error occurred (error code -1407) can somebody help me? files do not get deleted..and the trash not emptied.. thanks

I'm trying to delete files from an external disc and it doesn't let me couse this pops up:
The operation can’t be completed because an unexpected error occurred (error code -1407)
Please what does it mean? I also have a file in the trash of my mac book named something similar to: a'*.'*.'*'.*.
and this cannot be deleted either..
Please let me know what I can do.
I also have many files in the external disc that I need so I cannot do a format..
Thank you.
Best Regards
Karin

Have you tried putting the file from your Drobo, onto your computer, then onto to the external hard drive?

Error code 1625 upgrade to windows 8.1. I do not want to upgrade from Windows 7

Similar Messages

Maybe you are looking for