Error code -17306 while accessing container from TestStand

Hi,
I am getting an error -17306 while accessing the TestStand container present in Station Globals using invoke node property object. Please find below the code snippet.
Thanks,
Neha

Hi
I am not sure too, how to obtain sequence context from TS application manager. However, did you try using the lookupstring as "StationGlobals.UUT1.Name" or as "FileGlobals.UUT1.Name"?
I think, the reference to globals will include Station Globals and File Globals. so, you might have to be specific in the lookup string.
the error says the name of the variable or property is not valid.
also, you wired "0" which means do not create the variable if not found. is that what you wanted to configure?

Similar Messages

Error while accessing container element _ALERT_LOGICAL_SYSTEM

Hi,
Getting below error in SLG1 T.Code, I, am getting E-Mail but without any ALERT ID, MESSAGE ID and Interface name pls suggest for the same to solve.
"Error while accessing container element ALERTLOGICAL_SYSTEM" ERROR IN SLG1
Rgds,
MFH

Did you checked this thread: Alerts problem and log
Regards,
Abhishek.

Received HTTP error code 400 while fetching source feed. - Just Started 2 weeks ago; preventing iTunes podcast from updating

Good day.
When trying to update my feed http://feeds.feedburner.com/SpiritLedSpiritFed, I received an HTTP error code 400 while fetching source feed message. Nothing has changed on my end as I've been using Dropbox for the feed and the files since last year and was able to successfully update the feed up to two weeks ago.
I did run through all the tools on the Feedburner page (validator, podmedic, feedmedic) received a clean bill of health on the feed and I've looked at both Feeburner's site as well as Dropbox's support page to see if anything could have changed (requiring https or some other format for the feed), but no luck so far.
The strange thing is that on the feed itself, it's listed as http://dl.dropbox.com/s/xxxxxxxxxx/xxxxxxxx.xml. However, when I tried to 'RESYNC' it, the 400 error was displayed and it's listed as https://dl.dropboxusercontent.com/xxxxxxxxxx.xml which is says it cannot reach.
Any suggestions would help as I've not been able to update my iTunes podcast for two weeks now.
Thanks

The URL you give redirects to https://dl.dropboxusercontent.com/s/466rh3k2kw7f6jr/SpiritLedSpiritFed.xml
This appears to be a viable feed. However it contains this tag:
<itunes:new-feed-url>https://www.dropbox.com/s/466rh3k2kw7f6jr/SpiritLedSpiritFed.xml</itunes:new-feed-url>
That will redirect iTunes (though nothing else) to the enclosed URL, and that is a web page containing a display of the feed and a download button, which is no use to iTunes. Consequently on attempting to subscribe in iTunes with any of these URLs the feed comes up empty. You need to get rid of these redirects and provide a direct link to the feed file; and you should not use https (encrypted connection) but http. Also, Dropbox isn't a good place to host your files, but if you really must use it you have to serve as a direct access in the same way as a web page, not as sharing. You have your media files on Dropbox as well, and the URL redirects to an https version, though it does play in a browser. This itself may cause problems; and if your podcast gets popular you will run into problems as Dropbox isn't really geared to do this sort of thing.

Error code 50 while trying to download a font from adobe creative cloud

I received a error code 50 while trying to download a font from adobe creative cloud saying that the "Creative Cloud desktop failed to update" and that I should contact customer service. How should I resolve this issue?

Read here.
http://support.apple.com/kb/TS1279

Error in DMS while accessing from portal

Hi Experts,
Iam getting the below error in portal while accessing the dms repository. the repository was fine status is in green color
but still getting the error while iam viewing it from content administration > kmcontent> my repository name
what should i do please help me in this
com.sap.netweaver.bc.rf.common.exception.IOOperationFailedException: Connection Failed: Connection setup failedConnection Failed: Nested Exception. Failed to get connection. Please contact your admin.
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMR3FunctionCalls.openConnection(DMSRMR3FunctionCalls.java:5934)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMR3FunctionCalls.getTopLevelFolders(DMSRMR3FunctionCalls.java:426)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMStructure.refreshChildren(DMSRMStructure.java:531)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMStructure.getChildren(DMSRMStructure.java:574)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMMutableNamespaceManager.findResources(DMSRMMutableNamespaceManager.java:930)
at com.sapportals.wcm.repository.CollectionImpl2.internalGetChildrenManager(CollectionImpl2.java:310)
at com.sapportals.wcm.repository.CollectionImpl.internalGetChildren(CollectionImpl.java:1616)
at com.sapportals.wcm.repository.CollectionImpl.doGetChildren(CollectionImpl.java:145)
at com.sapportals.wcm.repository.CollectionImpl.getChildren(CollectionImpl.java:125)
at com.sapportals.wcm.repository.CollectionImpl.getChildren(CollectionImpl.java:358)
at com.sapportals.wcm.service.resourcelistfilter.cm.ResourceListFilter.getChildren(ResourceListFilter.java:420)
at com.sapportals.wcm.rendering.collection.AbstractRendererStatus.initialfilter(AbstractRendererStatus.java:331)
at com.s...
Please help me in this .............
waiting for your responses.....
Thanks & Regards,
Shilpa.

Dear
You will have to create one System for R/3 Server Access, Once you have created that you will have to maintain User mapping for System Access for each individual users, who want to access the DMS Documents from Portal.
Regards,
Tushar Dave

TS1424 I get error code 1009 while trying to download an application from app stor

I get error code 1009 while trying to download an application from app storp

You will need to do what it says, contact iTunes support. Click the Support tab above, then the Get Started link in the Contact Apple Support area and you'll be guided.
Regards.

An error has occurred while accessing SQL database or system resources. If this is the first time you have seen this message, please try again later. If this problem persists, please contact your administrator.

I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
is the first time you have seen this message, please try again later. If this
problem persists, please contact your administrator." When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields."
The last time I checked it was working, I'm not aware of any new updates installed recently? I did a full Profile Synchronization as well, but still not working, please advise? -- Evenstarline

Hi Sara,
First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account.  I
was able to do this way after we upgraded from SP 2007 to SP 2010 as well.   I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
my novice questions below?
1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
     Error generating in red towards top of the audience page..."One or more values typed on this page are not valid. Check the text for the indicated fields."
     Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm). Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"? I checked all
3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem? What does it do? And How do I run it?
4. I'm also new to viewing the ULS log. I'd just downloaded a viewer for it. I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
Admin is installed)? There's so many of them, what should I be looking for exactly?
Evenstarline

TS3694 IVE GOT AN ERROR CODE 9006 WHILE DOWNING TO IOS6 WHAT CAN I DO THIS IS THE FORTH TIME IVE TRIED

ive got an error code 9006 while downloading to ios6 what can i do to update please ?

From the link your question was posted from:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

Error Code 8024200D while installing update KB3000850 for Windows 8.1

Error Code 8024200D while installing update KB3000850 for Windows 8.1
I have been prompted for the last 10 days to install the important update KB3000850 in my laptop, but the installation fails every time.
Two days ago, on March the 12<sup>th</sup>, I installed 31 updates without any problem. What is wrong with this particular update?
You will find below my dialogue with Microsoft Support Engineer, Mr Niranjan Manjhi, who referred me to you:
Hi Michelle,
Thank you for posting your query in Microsoft Community.
I understand that you are unable to install the a specific update KB3000850. I will be happy to assist you with your query. Let me ask you;
Is your computer connected to domain?
Which security software is installed in the computer?
Do you remember making any specific change in the computer prior to the issue?
This November update rollup also includes all previous updates since the previous image update in April 2014 and this includes performance and reliability
improvements.
Cause:
This issue occurs because a process keeps a file in the component store open. Therefore, the file cannot be deleted or overwritten. Let's try the methods below and
check the status.
Method 1: Depending on the architecture of your
Windows 8.1 operating system, I would suggest you to install the following package first and then try installing the KB3000850.
All supported x86-based versions of Windows 8.1: [link] Download the package now.
All supported x64-based versions of Windows 8.1:
[link] Download the package now.
Restart is required.
Method 2:
If the issue still persists, run the Windows Update Troubleshooter and check the status.
Click to run
[link] Windows Update Troubleshooter
Also refer to:
[link] Troubleshoot problems with installing updates
Hope this information is helpful. Please feel free to reply in case you face any other issues with Windows in future.
Regards,
Niranjan Manjhi
Dear Niranjan,
Thank you for your answer.
To answer your questions:
1) Yes, my laptop is connected to the domain,
2) My security software is McAfee Total Protection, the same I use for my PC running Windows 7 XP,
3) I did not make any specific change to the laptop. It is true though that I run regularly McAfee´s QuickClean.
In your answer, you suggested 2 methods for resolving the problem.
I chose to apply first the second one, i.e. I ran once again the Windows Update Troubleshooter, which revealed again the following status:
Potential Windows Update Database error detected Ox800F08F: Not fixed
Windows Update components must be repaired: Fixed
And a last information: Yesterday, McAfee´s Vulnerability Scanner was automatically activated, showing as "critical" the update in question ("important" according to Windows)!
As for applying the first method you suggested, I will need the services of a professional, someone more IT literate than myself.
Michelle
Hi Michelle,
Thank you for keeping us updated on the issue.
Since the computer is connected to domain, I would request you to post your query in the TechNet forums as your question is beyond the scope of what
is typically answered in this consumer forum and would be better suited for the IT Pro audience on TechNet.
Please post your question in the link TechNet Forums.
Regards,
Niranjan Manjhi

Hi there @Achintya-only
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I see that you are getting an error code, when you try to install Windows 8.1 from USB or DVD. I am happy to assist.
Just to clarify, you are using a standalone Windows installation disk, you are not using a factory recovery image. Is that correct?
Have you run the hardware diagnostics on your notebook? HP Notebook PCs - Testing for Hardware Failures (Windows 8)
What operating system was on the system before, and have you made a set of recovery media, for your original factory installation?
Please let me know what you find.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Getting error in portal while accessing dms repostitory

Hi Experts,
Iam getting the below error in portal while accessing the dms repository. the repository was fine status is in green color
but still getting the error while iam viewing it from content administration > kmcontent> my repository name
what should i do please help me in this
com.sap.netweaver.bc.rf.common.exception.IOOperationFailedException: Connection Failed: Connection setup failedConnection Failed: Nested Exception. Failed to get connection. Please contact your admin.
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMR3FunctionCalls.openConnection(DMSRMR3FunctionCalls.java:5934)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMR3FunctionCalls.getTopLevelFolders(DMSRMR3FunctionCalls.java:426)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMStructure.refreshChildren(DMSRMStructure.java:531)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMStructure.getChildren(DMSRMStructure.java:574)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMMutableNamespaceManager.findResources(DMSRMMutableNamespaceManager.java:930)
at com.sapportals.wcm.repository.CollectionImpl2.internalGetChildrenManager(CollectionImpl2.java:310)
at com.sapportals.wcm.repository.CollectionImpl.internalGetChildren(CollectionImpl.java:1616)
at com.sapportals.wcm.repository.CollectionImpl.doGetChildren(CollectionImpl.java:145)
at com.sapportals.wcm.repository.CollectionImpl.getChildren(CollectionImpl.java:125)
at com.sapportals.wcm.repository.CollectionImpl.getChildren(CollectionImpl.java:358)
at com.sapportals.wcm.service.resourcelistfilter.cm.ResourceListFilter.getChildren(ResourceListFilter.java:420)
at com.sapportals.wcm.rendering.collection.AbstractRendererStatus.initialfilter(AbstractRendererStatus.java:331)
at com.s...
Please help me in this .............
waiting for your responses.....
Thanks & Regards,
Shilpa.

Hi,
Thanks for your imediate response. we deplyed the DMS connectors in portal we got standard role document explorer
and i changed the parameters in the dmsrm repository but still facing the same error.
please help me in this
waiting for your response
Regards,
Shilpa.

Getting Error Code U44M1P7 while upgrading, how do I correct?

Getting Error Code U44M1P7 while upgrading, how do I correct?

Which product's update you are trying to install?
Is it from Creative Cloud or perpetual?
Please check following if you are having Creative Cloud.
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

LDAP: error code 50 - Insufficient Access Rgiths

Hi,
I am newbie at Oracle Internet Directory. I hope you help me to resolve the following problem:
When I signed in the Oracle Director Manager with user "cn=orcladmin,cn=Users,dc=localhost,dc=com" and blank password
to create an entry (or attribute). I got error: [LDAP: error code 50 - Insufficient Access Rgiths]
How do I resolve this problem?
Thanks,
QuanND

Connecting as orcladmin requires using a password. The password has been established during installation of OID. By default from (9.0.4) on it is set to be the same password as the ias_admin password you provided during installation of the Oracle Infrastructure installation.
Notice that there are two (2) orcladmin entries in OID.
One cn=orcladmin is the OID superuser (same as root on UNIX) the other one is cn=orcladmin, cn=users,dc=your.default.domain
When you login to OID using ODM and specify only orcladmin ODM assumes by default this will be cn=orcladmin (aka root)
regards,
--Olaf

Oracle error ORA-22905: cannot access rows from a non-nested table item

Oracle error ORA-22905: cannot access rows from a non-nested table item
Creating a report using oracle plsql code .
Getting error ;
Oracle error ORA-22905: cannot access rows from a non-nested table item
when I am trying to pass data in clause in pl sql proc
basically I have a proc which takes 2 parameters(a and b)
proc (
P_a varchar2,
p_b varchar2,
OUT SYS_REFCURSOR
culprit code which is giving me the error and on google they say cast it but I dont know how to do it in my context
--where id in (
--        SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_a) FROM dual)
--        union
--        SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_b) FROM dual)
data sample returned from this :SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_a) FROM dual)
'Abc','def',
data sample returned from this;SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_b) FROM dual)
'fgd','fth',
Any answers ?
How to pass data in clause in a better way

Why are you creating a duplicate post? I already asked you to post p_cd_common.get_table_from_string. In particular what is function return type and where it is declared. As I already mentioned, most likely function return type is declared in the package and therefore is PL/SQL type. And TABLE operator can only work with SQL types.
SY.

I keep getting Error code: ERR_TIMED_OUT when accessing only one website through googlechrome or safari

I keep getting Error code: ERR_TIMED_OUT when accessing only one website through googlechrome or safari

Www.Onereceipt.Com<http://Www.Onereceipt.Com>
Sent from my iPhone

Error code 0x80240031 while updating to 8.1

From last 20 days I am facing this error code 0x80240031 while updating to 8.1 sharp at 50% ...tried almost 50-60times on my ... G500s ... pre-installed os .... I contacted both Microsoft and Lenovo for this issue ... both of them tried to solve it ... Microsoft suggested me to reinstall the whole os. So I contacted Lenovo for the same ...they reinstalled it ... BUT STILL THE PROBLEM EXISTS.... I don’t know what to do m very frustrated ... should I sue Microsoft for not solving or Lenovo..... Because if this issue won’t get solve... I might have to take some legal source to solve my case ...I tired every option available on the web .....as i cant even get an new windows key or DVD...

I tried everything on that link... but still facing the error...
command prompt and type/run: "sfc /scannow" ...no problem
Dism /Online /Cleanup-Image /RestoreHealth.... no problem
Antivirus ..uninstalled .....
i tired the every possible thing on this webiste also
1. http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_install/windows-81-update-error-...
2. http://www.thewindowsclub.com/error-code-0x80240031-updating-to-windows-8-1

Error code -17306 while accessing container from TestStand

Similar Messages

Maybe you are looking for