Error code:-1967362023(0x8abc 7019)

Hi everyone,
When I run the VILogger software using a NIPCI6221 and a CB-68LPR terminal block appears the following error:
Engine Error!
Error code = -1967362023(0x8abc 7019)
Description=Error -19637362023 ocurred at an unidentified location.
Possible reason (s):
Windows GetCommError: the hex value of this code is x4000
Interpret it bit-wise as follows:
x4000:serial port VI error
x0001:receiving queu overflowed or character was received after end-of-file character
x:0002:character was lost by overwrite
x0004arity error
x0008:framing error
x0010:break condition
x0020:CTS timeout
x0040SR timeout
x0080:RLSD timeout
x01000:Transmission queue was full when new character arrived
x:0200: parallel device timeout
x:0400arallel device I/O error
x0800arallel device not selected
x1000: parallel device out of paper
x8000:requested mode is not supported or the idComDev parameter is invalid
The terminal configuration used is Signal NRSE
The signal Input range is: Max 10V, Min -10V
Please, if anyone knows the error and can suggest me what to do, it will be appreciated
Thanks
Luis

Hi,
You probably do not have access to the database for VI Logger. Follow these steps to get access to the database.
Most users won't have write access to this folder. You need to enable
write access to this folder for all users. To do this, follow the
following steps:
Open a Windows Explorer window and select the menu Tools»Folder Options
Check the last option called Use Simple File Sharing as the following image.
Find the database folder. If you cannot find it, you might need to show the hidden folders.
Right click over the folder and select Sharing and Security. On the Security tab add the user(s) you would like to have access to the database.
Make sure you check Full Access to the user. The following image is an example.
Also, for the error that you are getting, you might want to create a new database and see if that helps as well.
All of this information is given in the following document.
Why Do I Get "Engine Error!" in VI Logger When Logged in as a Different User?
That should solve your problem.
Best regards,
Raajit L
National Instruments

Similar Messages

FS - Error code 3006 from SQL-Query

Hello world!
Can someone inform me which possible errors in a query cause the following error message after the query is activated?
Internal Error (3006) Message [131-183]
Until now I had only error code 1003, which signals syntax errors etc. in the query.
By the way: Does anywhere exists a list of error codes/messages occuring in SAP B1?
Thank you!
Frank Romeni

Error codes and their description can be found in SDK help files
I have pasted them below for your ref
-39
End of File
-43
File not Found
-47
File is Busy
-50
File Cannot Open
-51
File Corrupted
-99
Division by Zero
-100
Out of Memory
-101
Print Error
-103
Print Canceled
-104
Money Overflow
-111
Invalid Memory Access
-199
General Error
-213
Bad Directory
-214
File Already Exists
-216
Invalid File Permission
-217
Invalid Path
-1001
Data Source - Bad Column Type
-1003
Data Source - Alias Not Found
-1004
Data Source - Value Not Found
-1005
Data Source - Bad Date
-1012
Data Source - No Default Column
-1013
Data Source - Zero/Blank Value
-1015
Data Source - Integer Overflow
-1016
Data Source - Bad Value
-1022
Data Source - Other File Not Related
-1023
Data Source - Other Key Not In Main Key
-1025
Data Source - Array Record Not Found
-1027
Data Source - Value Must Be Positive
-1028
Data Source - Value Must Be Negative
-1029
Data Source - Column Cannot be updated
-1100
Data Source - Cannot Allocate Environment
-1101
Data Source - Bad Connection
-1102
Data Source - Connection Not Opened
-1103
Data Source - DB Already Exists
-1104
Data Source - Cannot Create Database
-1200
Data Source - Data Bind General Error
-2001
Data Source - Bad Parameters
-2003
Data Source - Too Many Tables
-2004
Data Source - Table Not Found
-2006
Data Source - Bad Table Definition
-2007
Data Source - Bad Data Source
-2010
Data Source - Bad Data Source Offset
-2013
Data Source - No Fields In Table
-2014
Data Source - Bad Field Index
-2015
Data Source - Bad Index Number
-2017
Data Source - Bad Alias
-2020
Data Source - Bad Alias
-2022
Data Source - Bad Field Level
-2024
Data Source - Not Matching Data Source
-2025
Data Source - No Keys In Table
-2027
Data Source - Partial Data Found
-2028
Data Source - No Data Found
-2029
Data Source - No Matching Field
-2035
Data Source - Duplicate Keys
-2038
Data Source - Record Lock
-2039
Data Source - Data Was Changed
-2045
Data Source - End of Sort
-2049
Data Source - Not Opened for Write
-2056
Data Source - No Matching With Current Data Source
-2062
Data Source - Bad Container Offset
-3001
Query - Field Not Found
-3003
Query - Bad Data Source
-3004
Query - Bad Token
-3005
Query - Token After End
-3006
Query - Unexpected End
-3008
Query - Too Long Query
-3009
Query - Extra Right Parenthesis
-3010
Query - Missing Right Parenthesis
-3012
Query - No Operation Code
-3013
Query - No Field In Comparison
-3014
Query - Bad Condition
-3015
Query - Bad Sort List
-3017
Query - No String
-3018
Query - Too Many Fields
-3019
Query - Too Many Indexes
-3020
Query - Too Many Tables
-3021
Query - Reference Not Found
-3022
Query - Bad Range Set
-3023
Query - Bad Parsing
-3025
Query - Data Bind is Missing
-3026
Query - Bad Input
-3027
Query - Progress Aborted
-3028
Query - Bad Table Index
-3032
Query - General Failure
-3033
Query - Empty Record
-3036
Query - Bad Parameter
-3037
Query - Missing Table in List
-3040
Query - Bad Operation
-3041
Query - Bad Expression
-3042
Query - Name Already Exists
-3044
Query - Time Expired
3001
Form - Is Not Initialized
3002
Form - Bad Data Source
3003
Form - Exceeded Data Sources Limit
3006
Form - Invalid Form Item
3007
Form - Exceeded Forms Limit
3009
Form - Too Many Saved Data
3012
Form - Invalid Form
3015
Form - Cannot Get Multi-Line Edit
3016
Form - Bad Item Type
3017
Form - Bad Parameter
3023
Form - No Message Callback
3029
Form - Item Is Not Selectable
3031
Form - Bad Value
3033
Form - Item Not Found
4007
Grid - Invalid
4008
Grid - Bad Size
4009
Grid - No Data
4011
Grid - Invalid Parameters
4013
Grid - Not Super Title
4014
Grid - Super Title 2 Exits
4015
Bad Item Unique ID
4016
Grid - Bad Data
4017
Grid - Column is Already Folded
4018
Grid - Column is Already Expanded
4019
Grid - Line Exists
4020
Grid - Not Enough Data
4022
Grid - Super Title Exists
4027
Grid - Row Is Not Collapsible
8004
Status Bar - No Such Info
8005
Status Bar - Info Occupied
8006
Status Bar - No Message Bar
8007
Status Bar - Progress Stopped
8008
Status Bar - Too Many Progress
5001
Graph - Invalid
5002
Graph - Bad Form Item
5005
Graph - Bad Parameters
-7008
Form not found
-7000
Invalid Form
-7031
Form - Reserved /Illegal form Unique ID
-7032
Form - Invalid Mode
-7006
The item is not a user defined item and cannot be manipulated in such manner
-7005
Invalid table name
-7004
XML batch load failed
-7003
Menu operation Add failed
-7002
Function not supported
-7001
Invalid Item
-7034
Could not clear item in group
-7033
Out of boundaries
-7020
This method cannot be invoked by a Cell object
-7019
Invalid form unique ID. Should not begin with an F_ prefix
-7018
Invalid Field Value
-7017
Invalid Field Name
-7016
This datasource object is not a user-defined object
-7015
Invalid Column
-7014
A Column object with the specified unique ID already exists in the system.
-7013
The string value entered should be less then 10 characters.
-7012
An Item object with the specified unique ID already exists in the system.
-7011
The string value entered should be less then 11 characters.
-7010
A form with the requested unique ID already exists in the system.
-7009
The string value entered should be less the 32 characters.
-7040
Cannot Load XML File
-7051
Unexpected usage of the specified XML TAG.
-7050
This action type is not valid or not implemented yet.
-7043
Cannot load the Menu resource from the specified XML file.
-7042
Cannot load the Item resource from the specified XML file.
-7041
Cannot load the Form resource from the specified XML file.
-7071
Failed to create the items group.
-7070
UID
-7069
Failed to change the form current pane level.
-7068
Failed to change the form color.
-7067
Failed to change the Form mode.
-7066
Failed to fix the form default button.
-7065
Failed to change the form Visible state.
-7064
Could not change the form title.
-7063
The change of form dimensions has failed
-7062
Unknown Form attribute
-7061
XML batch resource update is not supported yet.
-7060
Reached Max Number of user data sources.
-7094
Failed to add the items child objects.
-7093
Failed to batch add the items
-7092
Failed to bind the item to the data source
-7091
Wrong Item Attribute
-7090
Unknown Field Type
-7114
Type of Column is Not Supported.
-7113
Failed to add the column child objects.
-7112
Failed to add the new columns.
-7111
Failed to bind the column to a data source
-7110
Invalid column attributes
-7133
The specified menu position is not valid
-7132
Invalid menu type
-7131
Failed to add the menu object
-7130
The specified menu already exists.
-7030
Invalid Row Number
-7029
Operation not supported on system form.
-7028
Out of boundary of DB data source offset.
-7027
The menu item is not a user defined menu item and cannot be manipulated in such manner.
-7026
Menu item was not found
-7025
Unknown Form State
-7024
Failed setting form bounds
-7023
Invalid Target
-7022
Could not commit action because the item is currently in focus.
-7021
Operation could not be set on extended edit text item.
-7200
Your connection string doesn't much UI development work mode.
-7201
The specified connection string is not valid.

Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport. I've been using the passport for about a year now without any problems on older Macbooks in my house. I used to be able to read and write to this drive no problem. I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive. When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem. If I try to delete that folder I just created, I get this error:
The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
(Error code -36)
The folder has nothing in it whatsoever. I just created it. But if I go to Terminal and I run
rm -rf "untitled folder"
This works fine. Why is Terminal acting different than Finder? This does not happen on my other Macbooks. Thanks in advance.

Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

Report generation failed----error code:-17205; Access Denied.

Hi, All
    i have a trouble about report generation.it seems the error happened at the "write UUT report"--this step is teststand report generation'DLL.
    detail:
    An error occurred calling 'Save' in 'Report' of 'NI TestStand 2010 SP1 API'
Access Denied.. Error writing to file 'D:\program\seq\xxx.xml'.
The file might be open in another application. If file access is intermittently denied, you should try disabling the Microsoft FindFast utility.
    error code:-17205; Access Denied.
    locationtep 'Write UUT Report' of sequence 'Single Pass' in 'SequentialModel.Seq'
    How to fix it?
    Thanks a lot.
BR

Hm, it looks like the file might be open in another application. If you see that file accesss is intermittently denied, you should try disabling the Microsoft FindFast utility.
CTA, CLA, MTFBWY

There was a recent upadate on my PC, however it does not work. A error code comes up which says, min version is not compatible with max version. And I caanot open my browser. Please help.

I do a system restore which allows me to open my browser. Without this I cannot open my browser - the error code comes up every time.

Do a clean (re)install
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
From https://support.mozilla.com/en-US/questions/764376

My ipod touch is not list as a device on itunes. When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.

Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes

Capturing oracle error codes into a variable

Hi
Can someone show me how it is possible to save an Oracle defined error code into a variable? What I am trying to do is when a stored procedure fails an Oracle error is raised, such as ORA-xxxx, then pass this code into variable to be saved into a log.
How do I achieve this?

user633278 wrote:
How do I achieve this?Function SQLCODE in PL/SQL exception handler returns error code. SQLERRM returns message:
SQL> declare
2      x number;
3 begin
4      x := 1/0;
5    exception
6      when others
7        then
8          dbms_output.put_line('Error code: ' || SQLCODE);
9          dbms_output.put_line('Error message: ' || SQLERRM);
10 end;
11 /
Error code: -1476
Error message: ORA-01476: divisor is equal to zero
PL/SQL procedure successfully completed.
SQL> SY.

Error Code:942 While Scheduling a report in BI Publisher

Hi All,
I am trying to schedule one report in BI Publisher.
After Clicking Submit Button while scheduling report,i get following error:
Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 080319)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist Error Code: 942 Call: UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 50 WHERE SEQ_NAME = 'JOB_ID_SEQ' Query: DataModifyQuery()
Kindly Help me in resolving this issue
Regards
Amrita Singh

i know the issue,i can give quick fix, but in-order to make sure you don't get another glitch like this.
I would recommend, you to install the scheduler in another schema or another db.
Re-installing the scheduler schema tables will fix this.

ORA-00600: internal error code, arguments: [ktsircinfo_num1]

While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors.
. . exporting table TEST4
EXP-00003: no storage definition found for segment(29, 371385)
SQL >Drop table test4 cascade;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
sql> Desc test4;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
I dont want to log TAR with oracle right now... I tried dropping and recreating Undo tablespace but still did not help much . Database version is 9204

hi
read metalink ID - 153788.1
CHeers

Transport control program tp ended with error code 0212

Hi all,
I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
                                                                       service: transport service
                                                                       start : online
                                                                       Function: TMS_TP_SHOW_BUFFER
                                                                       message: TP_REPORTED_ERROR
In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
Can you tell me how to resolve this issue?

dev_tp contains:
This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
unicode enabled version
usage: R3trans.exe [<options>] <control_file>
The control_file describes what R3trans has to do.
The following options are possible:
-c f1 f2 : Copy file f1 to f2 with character set conversion.
-d       : DB connect. Test if SAP database is available.
-i file : Import from file without using a control file.
-l file : List the contents of file to the log file.
-m file : List the contents of file to allow tp to create a cofile.
-t       : Test. All database changes are rolled back.
-t4      : Trace level 4. Switch on developer trace.
-u <int> : Unconditional modes. See below.
-v       : Verbose. Write more details to the log file.
-w file : Log file. The default log file is 'trans.log'.
-x       : DB connect without access on any SAP table.
R3trans.exe finished (0012).
& the slog file is not there in the trans/log directory

While activating a request in DSO getting error code 10

While activating a request in DSO getting error code 10
Hi All,
I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
I have checked the formula in Transformation and it works fine. Still I am not able to load data.
Please help.
Thanks and regards
Vishal Pardeshi

Check the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
Otherwise you can check the error from the monitor screen of the request in Details tab.
Veerendra.

Some data in ... could not be read or written. (Error code -36).

Hello.
I just got a Lacie 512mb disk, and thought it would be ideal for running my iTunes library off of. Got the disk, ran it through its paces, hooked it up to my Mac mini, and I can't seem to copy hardly any files over. Here's one error (but you can replace "iTunes Library" with any song and it's the same thing)...
'The Finder cannot complete the operation because some data in "iTunes Library" could not be read or written. (Error code -36).'
So, I think there's disk or file damage, etc. I boot off an external and run Disk Utility, DiskWarrior and TechToolPro against it - everything checks out fine.
But I can't copy files from the mini's internal to my external Repair Boot disk or the Lacie 512. Always that same -36.
So, at first I think it's the mini, then I think it's the Lacie, because it's new, so I reformat it: same issue. And that coupled with it won't copy to my Repair Boot, makes me think the mini again.
But, I've got a g1 iPod mini hooked up (formatted in hfsj+), and I can copy this file to the iPod mini, but no where else. I not sure what this makes me think.
And, I can duplicate the file on the Mac mini. In fact, if it's a song file that won't copy (none of them will), I can play it just fine.
Thanks.
Mac mini Mac OS X (10.4.3)

I experienced a problem in a familiar way.
After a recording session I tried to copy the complete folder with session and sound files to another disk (original and target disk both LaCie d2 250 FW800).
Somehow the proces stopped prompting an -36 error over some files.
When I look up these files in the Finder, it seems to have an iTunes audio-file icon instead of a ProTools audio-file icon (and so other standard app to open with). All the other files will copy fine. The files will play with quicktime in the preview window.
Any-one a solution?
Almost seems like some kind of copy protection, like implied earlier in this thread. I hope it's not. These are the originals...

"the finder cannot complete the operation because some data in [name of iMovie file] could not be read or written (Error Code 26)

Hi all,
I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
"the finder cannot complete the operation because some data in [name of
iMovie file] could not be read or written (Error Code 26)" or the
message "A project file is missing. The file [name of the QuickTime
movie inside the project.dv] couldn't be opened and is being skipped."
This happened suddenly, I was able to save a backup version numerous
times while working on the project.
I followed some of Karl Petersen's advise on apple discussions. I opened
the package contents, and everything seems to be there. The source file
(original QuickTime movie) is there and can be opened and played. I
replaced the current project file with the backup in the package
contents, but that did not change anything. I was able to export the
movie timeline into a new project as a single clip, but would like to be
able to copy the current project.
Thanks for any ideas..

Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).

Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
Otto

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

2TB Ext. Hard Drive is corrupted?, error code -50 and then error code -35 when i try to empty out my trash

okay so a few days ago i received and email for one of my colleagues to do some final editing to a music video. the folder contained 2 videos a rough chops and the main which was about 2-3GB which i dragged on to my external hard drive . and at the time i was trying to install a trial version of parallel lines and me being a newbie to the software i didn't know i need windows installments for it to run lol but yeah... so i was just getting frustrated with the software i kept installing it uninstalling it and then i was thinking my the problem might be because my MacHD space is low (less then 40GBs on my MacHD), so.. i installed it on my hard drive where all my important files are (I'm a graphic designer and do light video editing) video projects and many photoshop projects form 2007 and logs and just a bunch of important files in my hard drive. so because i was so frustrated with the software i wasn't thinking and i installed it on my external 2TB hard drive. and when i realized parallel wasn't working i gave up, uninstalled the program form the hard drive and for some reason when i did that and i tried opening the video my friend had email to me and for some reason it did load up but a few seconds maybe about 10sec in the video is froze and closed my media app (VLC) and when i tried opening other video files it would freeze every few minutes but those specific files i had drag in last were not playing after at least 5 secs and eventually didn't open at all so i restart my computer login and now i get scared i see that my MacBook Pro isn't reading my external hard drive so i search threw forums... i unplug from the wall plug my external hard drive back in my computer and it loaded up but when i opened my external hard drive all my files had that plank white paper icon on my folders (because i have everything organized but subject when you open then drive folder. so... i go in to my projects and nothing, i open my edited photos and nothing... my hart feels like its about to drop and i keep opening files and there is nothing in them, but in "get info" of my drive it shows that there is filled so i go to "disk utility"... i "verify disk" passes ..."repair disk" doesn't past.... i look it up in forums... so i reboot my computer and go to the safe recovery menu. go threw the same ting "disk utility"... verify, pass... repair, pass... so now i feel relieved. i login files in the ext. hard drive load up i tried again to open the files and same thing happens... so now I'm thinking its the files i drag the files to the trash and try to empty and its gone i reboot the computer and my drive didn't load up so i tried unplugin it and back in... drive comes up i notice theres trash.. i tried emptying it and i get the error code -50. and no files are popping up on my external drive and i try to repair/unmount disk and the verify disk doesn't pass and when i click repair disk it doesn't past and another error code pops up -35.... so i felt my drive alone for a few days and yesterday i go the files deleted from the trash and now I'm not getting any codes but when i try to unmount.verify/repair the disk. keeps letting my tits need to be repaired so i click the repair button another error unable to unmount volume to repair...
what do i do? my files still don't show up. and I'm very sorry for the long paragraph but i have to be detailed for you to understand my situation

Read this.

Error code:-1967362023(0x8abc 7019)

Similar Messages

Maybe you are looking for