Error code -2003

I got the MPEG-2 Playback Component and then i tried to open a video and now a lil thing pops up and says error -2003: a data handler needed by the movie could not be found. plz help me on what to do so i can put the videos on my ipod

The whole experience can be extreme irritating/challenging. Usually worth it in the end ....
Just checking,
Is that error message is coming up on the Kobo, or on ADE (Digital Editions) on a PC or Mac?
If on the kobo, what app are you using?
Try installing the(free) Bluefire app and see if that works better,
quite a few people have problems authorizing both Aldiko and Overdrive which are the other most common apps.

Similar Messages

I am unable to restore my iPhone 3 to factory orginal. I keep getting error code 2003

I had jail broken my iPhone 3 a number of years ago for travel use.
I now wish to return it to factory original so that I can have it correctly unlocked to take to Europe for use when traveling.
But when I try to do a restore to factory it keeps displaying the error code 2003 and I cannot locate what that means.
I tech's at my local Apple store have tried as well with the same result.
They were also not able to provide me with any explanation as to what the error code meant.
Does anyone out there know what it means or how I may be able to resolve this issue?
Thanks

That message covers several things. Most often it is a cable problem, switching to another cable (Apple certified) often fixes it.
Second it can be security software on your computer interfering, temporarily disable all of them and try again.
There is a third jailbreak related issue, you could be attempting to contact a site other than Apple. Try it on a different computer where a jailbroken device has never been used. The final jailbreak issue normally affects certain models of the 3Gs but possible can affect a 3G. Altering the baseband chip for your unofficial unlock my have damaged it.

Can someone advise how to resolve the error message: E_ADEPT_UNKNOWN (error code 2003)?

Can anyone assist with an error message when I try to authenticate my Adobe ID in Overdrive: E_ADEPT_UNKNOWN (error code 2003). Thanks

try clearing your adobe.com cookies or using a different browser.

TS3694 what is the error code 2003 when trying to restore an ipod touch

Im trying to restore a first generation ipod touch and it keeps coming up error code 2003. Ineed help to figure out to get the corrected.

Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
http://support.apple.com/kb/TS3694#error2001

I cant make restore for my iphone 3gs??,,,, needs restore and itunes cant make restore has an error code 2003... How can I solve this problem?

i cant make restore for my iphone 3gs??,,,, needs restore and itunes cant make restore has an error code 2003... How can I solve this problem?

See this support document for information about update and restore errors. Resolve iOS update and restore errors

HT201210 i am getting an error code 2003 when trying to restore my phone

i need to restore my phone was given to me as a gift. it is a use phone.

http://lmgtfy.com/?q=iPhone+error+code+2003

Apple Configurator error code 2003 MCCAndMNCs is invalid

Hi,
I have updated my MBP to OS X 10.10 (Yosemite) and installed the latest Apple Configurator (AC) 1.7.1.
I have an existing Profile that includes one (1) payload: Wi-Fi. This profile is used for Passpoint (HS2.0).
In the previous version of AC (1.6 I think), the profile I created worked (iPhone 5S with iOS 7 installed, AC on OS X Mavericks).
Here are the most important fields from the Payload:
Security Type is: WPA2 Enterprise
EAP type field is: EAP-AKA
MCC/MNCs field is: MCC=505, MNC=1 (I can't input 01 into this field, and the MNC is meant to be 2 digits, but the AC just replaces it with 1)
When I try to re-install this Wi-Fi Profile on an iOS8, the AC complains with the following error:
Has anyone seen this error before?
Where can I get a list of error codes that the Apple Configurator (1.7) uses?
Are there any workarounds available?
Thanks,
Al

This is the console output:
"19/11/2014 10:48:04.069 pm Apple Configurator[6524]: ERROR - 1297519ms <ACUProfileInstallOperation: 0x600000189240 { UDID = 2991a2d4d7844f7c8f2b2cd3e3c69ad1a5c7dd22 }> finished in 0.14 seconds with an error: Error Domain=com.apple.configurator.operation.error Code=14 "Unable to install profile ‟Telstra ENIW HS”" UserInfo=0x608001274ac0 {NSLocalizedDescription=Unable to install profile ‟Telstra ENIW HS”, NSUnderlyingError=0x600001a54640 "The profile “Telstra ENIW HS” is invalid."} (/SourceCache/AppleConfigurationUtility/AppleConfigurationUtility-550/Engine/Op erations/ACUOperation.m:151)"
//Al

Exchange 2003 Removal fails w/ Error code 0X80072030 (8240): There is no such object on the server- pls read

Dear all,
I know there are quite some threads regarding this issue. But I've been looking at all of them w/o any solution for my problem. Here we go...
I've followed all instructions for a Exchange 2003 to 2010 transition. All went fine to the point I'm trying to uninstall Exchange 2003 via Control Panel/Software/Remove. So far I did the following:
1. Move mailboxes to Exchange Server 2010 using Move Mailbox Wizard or Powershell => successfully
2. Rehome the Offline Address Book (OAB) generation server to Exchange Server 2010 => successfully
3. Rehome Public Folder Hierarchy on new Exchange Server 2010 Admin Group => successfully
4. Transfer all Public Folder Replicas to Exchange Server 2010 Public folder store => successfully
5. Delete Public and Private Information Stores from Exchange 2003 server => successfully
6. Delete Routing Group Connectors to Exchange Server 2003 => successfully
7. Delete Recipient Update Service agreements using ADSIEdit according to
http://technet.microsoft.com/en-us/library/bb288905(EXCHG.80).aspx => successfully
8. Uninstall all Exchange 2003 servers => fails with "Error code 0X80072030 (8240): There is no such object on the server"
I used the following articles while migrating to Exchange 2010:
http://technet.microsoft.com/en-us/library/bb288905(EXCHG.80).aspx
http://support.microsoft.com/kb/833396/en-us
http://www.simple-talk.com/content/article.aspx?article=882
and several more.
I looked into these forums regarding my problem and came up with:
http://support.microsoft.com/kb/283089/en-us
http://support.microsoft.com/kb/822931
I investigated the following possible reasons:
- homeMDB attribute (no references to my Exchange 2003 anymore)
- HomeMDBBL attribute (as described here
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmigration/thread/f0e3edd7-34e5-46b8-8061-1991aaffc30f) (no Information Stores available anymore as they have been successfully removed)
- msExchHomeServerName attribute (all pointing to my new Exchange 2010 server)
- the "famous" postmaster issue as described here:
http://support.microsoft.com/kb/283089/en-us (pointing to the new Exchange 2010 server)
In order to investigate all attribute related issues a utilized a VBS script resulting in an Excel sheet I was easily able to filter:
SET objRootDSE = GETOBJECT("LDAP://RootDSE")
strExportFile = "C:\temp\MyExport.xls"
strRoot = objRootDSE.GET("DefaultNamingContext")
strfilter = "(&(objectCategory=Person)(objectClass=User))"
strAttributes = "sAMAccountName,msExchHomeServerName,homeMDB,legacyExchangeDN,givenName,sn," & _
                                "initials,displayName,physicalDeliveryOfficeName," & _
                                "telephoneNumber,mail,wWWHomePage,profilePath," & _
                                "scriptPath,homeDirectory,homeDrive,title,department," & _
                                "company,manager,homePhone,pager,mobile," & _
                                "facsimileTelephoneNumber,ipphone,info," & _
                                "streetAddress,postOfficeBox,l,st,postalCode,c"
strScope = "subtree"
SET cn = CREATEOBJECT("ADODB.Connection")
SET cmd = CREATEOBJECT("ADODB.Command")
cn.Provider = "ADsDSOObject"
cn.Open "Active Directory Provider"
cmd.ActiveConnection = cn
cmd.Properties("Page Size") = 1000
cmd.commandtext = "<LDAP://" & strRoot & ">;" & strFilter & ";" & _
                                   strAttributes & ";" & strScope
SET rs = cmd.EXECUTE
SET objExcel = CREATEOBJECT("Excel.Application")
SET objWB = objExcel.Workbooks.Add
SET objSheet = objWB.Worksheets(1)
FOR i = 0 To rs.Fields.Count - 1
                objSheet.Cells(1, i + 1).Value = rs.Fields(i).Name
                objSheet.Cells(1, i + 1).Font.Bold = TRUE
NEXT
objSheet.Range("A2").CopyFromRecordset(rs)
objWB.SaveAs(strExportFile)
rs.close
cn.close
SET objSheet = NOTHING
SET objWB = NOTHING
objExcel.Quit()
SET objExcel = NOTHING
Wscript.echo "Script Finished..Please See " & strExportFile
What I did find is that all my Exchange enabled users have an legacyExchangeDN attribute that is still pointing to my Exchange 2003 organization:
e.g. "/o=First Organisation/ou=First Administrative Group/cn=Recipients/cn=Administrator"
Could this cause any problems?
Now the in depth look into my "Exchange Server Setup Progress.log":
[09:33:06] Leaving ScPRQ_DoesNotContainLastMAPIMDBInMixedModeAG
[09:33:06] ScPRQ_ServerIsNotRUSResponsibleServerInTheNonEmptyOrg (f:\titanium\admin\src\udog\excommon\prereq.cxx:3133)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CCompServer::ScCheckEVSPrerequisites (f:\titanium\admin\src\udog\exsetdata\components\server\compserver.cxx:1358)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CCompServer::ScCheckPrerequisites (f:\titanium\admin\src\udog\exsetdata\components\server\compserver.cxx:955)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CComExchSetupComponent::ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1598)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CComExchSetupComponent::ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1598)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] === IGNORING PREVIOUS ERRORS === HrSetProblemOnInstallAction, while calling ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1399)
           Der Vorgang wurde erfolgreich beendet.
[09:33:06] Ein Fehler ist beim Überprüfen der Voraussetzungen für die Komponente "Microsoft Exchange" durch Setup aufgetreten:
0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:14] CComBOIFacesFactory::QueryInterface (f:\titanium\admin\src\udog\bo\bofactory.cxx:54)
I did search for:
- Error code 0X80072030 (8240)
- ScPRQ_ServerIsNotRUSResponsibleServerInTheNonEmptyOrg
Nothing so far. In case some more information is needed just let me know.
Any help would be greatly appreciated as I absolutely don't know how to remove my Exchange 2003. Manual removal is not an option.
Alex

I kept on searching and found something else:
http://www.outlookforums.com/threads/33038-cannot-uninstall-Exchange-2000
It says that the following groups need to be resided in the AD's default "Users" organizational unit:
- Exchange Domain Servers
- Exchange Enterprise Servers
- Exchange Services Group
Unfortunately I cannot find the "Exchange Services Group". Does that have something to do with my problem?
Furthermore I found out that the Exchange 2003 has been originally installed with SBS 2003 back in time. The SBS 2003 has then be migrated to a regular Windows Server 2003 infrastructure with 2 DCs. But there still is a load of stuff reminiscent of SBS
2003 within the AD.
Then I dug deeper into my AD using ADSIEdit. I found another attribute homeMTA that is pointing to a corresponding Exchange server. After adjusting my aforementioned VBS script a was able to look into that attribute as well. I found 2 users pointing to my old
Exchange server within their homeMTA attribute.
Furthermore I saw that when trying to uninstall Exchange 2003 there is no path to my installation anymore. It's empty:
Another issue?
Regards
Alex

Tour Sync Issues with Outlook 2003 and Error Code 0x8004fceb

Hello, I have a Tour with DM 5.0, which I sync with Outlook 2003 on my laptop running Vista O/S. I am having a problem deleting items from the Tour that I've previously added via a sync with Outlook.
Some time after syncing, I delete the items from Outlook and then re-sync. Instead of deleting from BB, the changes dialog box tells me the items are going to be added from the device to Outlook!!! If I accept changes so that other calendar items will update (from Outlook to BB), Outlook remains fine, but the items do not delete from BB.
Additionally, existing items on BB are duplicated on the BB during sync. In other words, I have ended up with 7 entries for one appointment on the BB even though there's only one in Outlook. This primarily happens with recurring appointments.
Lastly, despite all this confusion, the sync ends with Error Code 0x8004fceb; check documentation, which I cannot locate on blackberry.com.
I am set up for two-way sync, future items only. I even reset to one-way sync from calendar to device to no avail.
Please help.
Thank you.

Sorry. I guess I needed to be clearer I have Office SP 2.
I will tell you that I currently running an older version of iTunes (7.3) because that is the only one that syncs.
In the newest version of iTunes (and of course the current one) it does give me the option to sync with outlook.
Message was edited by: obxbound

Can't start reports server on Windows Server 2003 SP1 Error code 13

Hi,
This morning I figured how to start the rwserver using the command, rwserver server = repsrv. This works using XP pro physical machine but now I am trying to perform the same task on a Windows 2003 virtual machine.
I have used the line:
rwserver -install repsrv.
To add repserv to the list of available services in computer management. This has appeared as an avaiable service and so I click to start it, unfortunately every time I do I get the error message:
"Windows could not start the OracleOraAppServer10g_home1Reports [repsrv] on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 133."
I am assuming this is a security issue with Windows 2003 but I can't find a cure anywhere.
Thanks in advance for any help that anybody is able to provide
Cheers
Daniel

Hello,
Step 1) Check that you can start the reports server from a "DOS Window" :
rwserver server=repserver
Step 2) Check the PATH set for rwserver.exe when it is running as a service
Some sysinternals utilities like Process Explorer / filemon may help :
http://www.sysinternals.com/
Regards

Error Code 0x82bc1095 trying to map folders in Address Book synching with MS Outlook 2003 SP3t

Help please. My BB Curve 8900 OS v5 has suddenly stopped synchronising with my MS Outlook 2003 SP3. It gets as far as address book then stops, giving error message " One or more configured folders is not availablr. Update mapping field and try again". Configuring my organiser, when I click on a tab I get another message saying "No available Message stores". I click on OK and get the tabbed page opern but the mapping folders field is empty and greyed out.
If I click on Map Fields, I get another error message "Error encountered. Error code 0x82bc1095"
No synchronisation takes place at all.
I am far from technically minded, say about one step above being a Luddite. Can anyone please advise me?

Thanks for your suggestion, but things have moved since then. I tried swapping my mapisvc by changing the extension to 'old' and running the repair, but this did not recreate a mapisvc.inf file, so I changed the extension back to inf. I also uninstalled Outlook Connector as other threads have suggested.
However another thread suggested resetting the organiser using the reset settings button. I did this, but the DTM will not now let me set up synchronisation with my Outlook. Outlook is shown as an option, along with Yahoo and ASCII.
It just lets me go through the process but does not produce a tick in the appropriate box at the end.
I did tell it to synch with Yahoo to see if it would take and it does, but when I try to change it to Outlook it does not register the change (leaving it as Yahoo). I have to select 'none' to clear the tick.
You can probably tell that I'm useless at this sort of thing and I'm getting very frustrated with the whole thing. I've had numerous problems ever since I upgraded the device software. I think that if I ever get this working again, I will not do anything else.
Hope you can help an old duffer and thanks again for your input.

HT201210 but what should i do if the error code that i got is not here? i had 2003 as the error code.

please please please i need your help
recently i was trying to update my ipod touch software
and everything went ok
but then i tryed to restore it and
a message appeared saying that an error hapenned
the error code was 2003
then i asked for more info
and this website appeared
and said something about.....
"if an error appeared while you were trying to restore your device,
then look for the error code that appeared"
and i did so, but my error code was not there
what should i do then??
my ipod touch is a second generation by the way

Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.

Credential Roaming failed to write to the Active Directory. Error code 5 (Access is denied.)

Hi All,
I could see following error event in all client computers , Could you please some one help me on this ?
Log Name:      Application
Source:
Microsoft-Windows-CertificateServicesClient-CredentialRoaming
Event ID:      1005
Level:         Error
Description: Certificate Services Client: Credential Roaming failed to write to the Active Directory. Error code 5 (Access is denied.)
Regards, Srinivasu.Muchcherla

If you are not using certificates and Credential Roaming for clients then simply ignore the error message.
If you are using certificates then you are getting access denied message when Credential Roaming is trying to write to your AD. More details about Credential Roaming here: http://blogs.technet.com/b/askds/archive/2009/01/06/certs-on-wheels-understanding-credential-roaming.aspx
http://blogs.technet.com/b/instan/archive/2009/05/26/considerations-for-implementing-credential-roaming.aspx
This is probably related to the fact that your schema version not 44 or higher: https://social.technet.microsoft.com/Forums/windowsserver/en-US/5b3a6e61-68c4-47d3-ae79-8296cb3be315/certificateservicesclientcredentialroaming-errors?forum=winserverGP
Active Directory
ObjectVersion
Windows 2000
13
Windows 2003
30
Windows 2003 R2
31
Windows 2008
44
Windows 2008 R2
47
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)

Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)
This is on two (2) separate machines. These are NEW INSTALLATION development work stations (laptops). One is Vista (Visual Studio 2008 / Crystal Reports 2008), and the other is Windows XP Pro (Visual Studio 2003 / Crystal Reports XI R1).
I am using EXISTING CODE (established over several years), and EXISTING REPORTS (established over several years). Old development station was XP Pro, as above, and still exists, and still works fine.
I can open the report in Crystal, and see the results just fine. Data for the report is obtained via ODBC.
Can someone identity the actual error by the Error Code above, and advise. Thanks You in Advance.

Ok, so let's start at step 1:
SP 1 just released and I'd recommend applying that. The SO is available from here:
https://smpdl.sap-ag.de/~sapidp/012002523100010503722008E/cr2008_sp1.exe
For future reference, msm matching the above SP is here:
https://smpdl.sap-ag.de/~sapidp/012002523100011715292008E/cr121_mm.zip
and msi is here:
https://smpdl.sap-ag.de/~sapidp/012002523100011722132008E/cr121_redist_install.zip
Step 2: a few questions:
a) I am not sure what CR SDK you are using; RDC, .NET? I suspect that you are using the CR assemblies for .NET, but do confirm.
b) what is the database you are connecting to?
c) is this a web or a win app?
Step 3: As the error can mean any number of things (to me it's just means something went wrong during the attempt to connect to the database...), the solution may vary, however the troubleshooting steps remain quite consistent:
1) Do make sure the report is indeed working in the CR 2008 designer (e.g.; make sure "saved data" is not enabled.
2) Try a simple new windows app with one of your reports. See if you have a report with no subreports and use it
3) If that works, use a report with subreports
4) If the above does not work in (1) above, create a new report to the same ODBC connection, do not code any database connection - let the report prompt for the logon parameter (PWD)
5) Run the new report in your new app, enter the PWD when prompted
6) If this works, add your database logon code
7) If that works, add your original report (again, preferably with no subreports)
8) If that fails, ensure that the subreport and main report use the same database connection type (ODBC)
9) If it works, see if you can determine the difference between your old app and the new app.
Ludek

DAC ETL tasks failing with Error Code

Here is a copy of just 1 of the tasks that fail. I did search for this and found reference to increasing DB Processes to 500 but that had no effect.
I have tried to reduce the number of Maximum Sessions in Setup to but it had no effect.
Some of the tasks completed. The remaining stay as Failed even after re-running ETL.
Using Informatica 8.1.1 SP5 32bit
Build: 7.9.5.1.011209.1448
Release Version: Oracle Business Intelligence Applications 7.9.5.1
Package: 011209.1448
Oracle 32bit 10g client
Windows Server 2003 R2 64bit
Details:
pmcmd startworkflow -u Administrator -p **** -s 10.1.11.69:4006 -f SDE_ORAR12_Adaptor -lpf D:\OracleBI\DAC\Informatica\parameters\SDE_ORAR12_Adaptor.SDE_ORA_Stage_ValueSetHier_Extract_Full.txt SDE_ORA_Stage_ValueSetHier_Extract_Full
Status Desc : Failed
WorkFlowMessage :
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [8.1.1 SP5], build [186.0822], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Rights Reserved.
Invoked at Thu Apr 15 14:39:18 2010
Connected to Integration Service at [10.1.11.69:4006]
Folder: [SDE_ORAR12_Adaptor]
Workflow: [SDE_ORA_Stage_ValueSetHier_Extract_Full] version [1].
Workflow run status: [Failed]
Workflow run error code: [36331]
Workflow run error message: [WARNING: Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_Stage_ValueSetHier_Extract_Full] will be failed.]
Start time: [Thu Apr 15 14:38:58 2010]
End time: [Thu Apr 15 14:39:03 2010]
Workflow log file: [d:\Informatica\PowerCenter8.1.1\server\infa_shared\WorkflowLogs\SDE_ORA_Stage_ValueSetHier_Extract_Full.log]
Workflow run type: [User request]
Run workflow as user: [Administrator]
Integration Service: [PowerCenter_Integration_Service]
Disconnecting from Integration Service
Completed at Thu Apr 15 14:39:18 2010
=====================================
ERROR OUTPUT
=====================================
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
Workflow Log.
INFO : LM_36435 [Thu Apr 15 14:38:58 2010] : (4716|4956) Starting execution of workflow [SDE_ORA_Stage_ValueSetHier_Extract_Full] in folder [SDE_ORAR12_Adaptor] last saved by user [Administrator].
INFO : LM_44195 [Thu Apr 15 14:38:58 2010] : (4716|4956) Workflow [SDE_ORA_Stage_ValueSetHier_Extract_Full] service level [SLPriority:5,SLDispatchWaitTime:1800].
INFO : VAR_27085 [Thu Apr 15 14:38:58 2010] : (4716|4956) Parameter file [d:\Informatica\PowerCenter8.1.1\server\infa_shared\Temp\SDE_ORA_Stage_ValueSetHier_Extract_Full_a04956] is opened for [workflow [SDE_ORA_Stage_ValueSetHier_Extract_Full]].
INFO : LM_36330 [Thu Apr 15 14:38:58 2010] : (4716|4956) Start task instance [Start]: Execution started.
INFO : LM_36318 [Thu Apr 15 14:38:58 2010] : (4716|4956) Start task instance [Start]: Execution succeeded.
INFO : LM_36505 : (4716|4956) Link [Start --> SDE_ORA_Stage_ValueSetHier_Extract_Full]: empty expression string, evaluated to TRUE.
INFO : LM_36388 [Thu Apr 15 14:38:58 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] is waiting to be started.
INFO : LM_36330 [Thu Apr 15 14:38:59 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full]: Execution started.
INFO : LM_36488 [Thu Apr 15 14:38:59 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] : [TM_6793 Fetching initialization properties from the Integration Service. : (Thu Apr 15 14:38:58 2010)]
INFO : LM_36488 [Thu Apr 15 14:38:59 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] : [DISP_20305 The [Preparer] DTM with process id [7972] is running on node [node01_OBIEEDEV01].
: (Thu Apr 15 14:38:58 2010)]
INFO : LM_36488 [Thu Apr 15 14:38:59 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] : [PETL_24036 Beginning the prepare phase for the session.]
INFO : LM_36488 [Thu Apr 15 14:38:59 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] : [TM_6721 Started [Connect to Repository].]
INFO : LM_36488 [Thu Apr 15 14:38:59 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] : [TM_6722 Finished [Connect to Repository]. It took [0.234368] seconds.]
INFO : LM_36488 [Thu Apr 15 14:38:59 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] : [TM_6794 Connected to repository [PowerCenter] in domain [Domain_OBIEEDEV01] user [Administrator]]
INFO : LM_36488 [Thu Apr 15 14:38:59 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] : [TM_6721 Started [Fetch Session from Repository].]
INFO : LM_36488 [Thu Apr 15 14:38:59 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] : [TM_6722 Finished [Fetch Session from Repository]. It took [0.234367] seconds.]
INFO : LM_36488 [Thu Apr 15 14:38:59 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] : [VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].]
INFO : LM_36488 [Thu Apr 15 14:38:59 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] : [VAR_27028 Use override value [ORA_R12] for session parameter:[$DBConnection_OLTP].]
INFO : LM_36488 [Thu Apr 15 14:38:59 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] : [VAR_27028 Use override value [9] for mapping parameter:[$$DATASOURCE_NUM_ID].]
INFO : LM_36488 [Thu Apr 15 14:38:59 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] : [VAR_27027 Use default value [] for mapping parameter:[mplt_BC_ORA_ValueSetHier.$$LAST_EXTRACT_DATE].]
INFO : LM_36488 [Thu Apr 15 14:38:59 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] : [TM_6721 Started [Partition Group Formation].]
INFO : LM_36488 [Thu Apr 15 14:38:59 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] : [TM_6722 Finished [Partition Group Formation]. It took [0.031249] seconds.]
INFO : LM_36488 [Thu Apr 15 14:38:59 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] : [PETL_24037 Finished the prepare phase for the session.]
INFO : LM_36488 [Thu Apr 15 14:38:59 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] : [TM_6792 Notifying the Integration Service that the prepare phase has been completed. : (Thu Apr 15 14:38:59 2010)]
INFO : LM_36488 [Thu Apr 15 14:38:59 2010] : (4716|4956) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] : [TM_6228 Writing session output to log file [d:\Informatica\PowerCenter8.1.1\server\infa_shared\SessLogs\SDE_ORAR12_Adaptor.SDE_ORA_Stage_ValueSetHier_Extract_Full.log].]
INFO : LM_36682 [Thu Apr 15 14:38:59 2010] : (4716|4960) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full]: started a process with pid [7972] on node [node01_OBIEEDEV01].
ERROR : LM_36320 [Thu Apr 15 14:39:03 2010] : (4716|4964) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full]: Execution failed.
WARNING : LM_36331 : (4716|4964) Session task instance [SDE_ORA_Stage_ValueSetHier_Extract_Full] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_Stage_ValueSetHier_Extract_Full] will be failed.
ERROR : LM_36320 [Thu Apr 15 14:39:03 2010] : (4716|4964) Workflow [SDE_ORA_Stage_ValueSetHier_Extract_Full]: Execution failed.
Thanks

Can you please post the session log?
Thanks,
Austin

Error code -2003

Similar Messages

Maybe you are looking for