Error code 21 on I tunes recovery

Hi,
I have a Iphone 3 gs, it went into recovery mode, so I logged in to I tunes recovery and my computer crashed!!!
Now when i sync it with I tunes it showes an Iphone connected but no serial number or memory size! also I tryed recovery again and it gets half way through then comes up with error code 21.
!!! Help please!!!

Try this support document for understanding error codes http://support.apple.com/kb/ts1275

Similar Messages

  • HT4623 iPhone 5, updating using iTunes, iphone could not be updated, error code 3014, iphone is in recovery mode, I have re-installed iTunes twice and each time got the same message

    iPhone 5, updating using iTunes, iphone could not be updated, error code 3014, iphone is in recovery mode, I have re-installed iTunes twice and each time got the same message

    Error 3014
    This error occurs when iTunes can't reach gs.apple.com in a timely fashion. Follow the steps below to contact the iOS software update server gs.apple.com.

  • TS3694 when in recovery mode iphone 3gs has a 1015  error code...can it recovery

    MY IPHONE 3GS WAS IN RECOVERY MODE AND I USED I TUNES TO RESTORE IT ....CAN A 1015 ERROR CODE BE RESTORE?

    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743
    ERROR 1015...
    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • Error code 0x0000003 on i tunes match upload this has apeared 3 times ??

    http://

    11:59:31,188 INFO [EntryPoint] Assets were resolved successfully. Script package created
    11:59:31,219 INFO [EntryPoint] Received StartScriptEvent
    11:59:31,219 INFO [EntryPoint] Running "CRMAP_Tabs_ATS" ...
    11:59:31,465 INFO [1] Initialized script service "oracle.oats.scripting.modules.http.api.HTTPService"
    11:59:31,466 INFO [1] Initialized script service "oracle.oats.scripting.modules.adfload.api.AdfLoadService"
    11:59:31,466 INFO [1] Initializing VU 1 for script CRMAP_Tabs_ATS
    11:59:31,569 INFO [1] Step: [1] Welcome
    11:59:34,794 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
    11:59:38,174 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
    11:59:40,151 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
    11:59:41,644 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
    11:59:45,874 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
    11:59:47,384 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
    11:59:48,905 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
    11:59:50,406 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
    11:59:51,925 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
    11:59:53,427 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
    11:59:55,584 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
    11:59:57,070 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
    11:59:57,767 ERROR [1] Error in section Run at line (script.java:113). Too many redirects. Browser will not redirect more than 30 times.
    Comparable WinInet error code: Error 12156: ERROR_HTTP_REDIRECT_FAILED.
    is this what you need ? thanks Claire

  • Getting error code 0x400110020000100b while doing system recovery for windows vista 32 bit.

    I attempted to do a system recovery on my Laptop using the included recovery discs and got this error 0x400110020000100B. THe disc looked pretty beat so last week I ordered a new set. Now when I got to put disc 2 in (at 80% complete) I get the same error.  I called customer support and he took me through the F9 process to no avail and I've also tried the F11 approach which got me no where.  I'm frustrated because I really don;t have the money for a new laptop.
    Laptop is a HP Pavilion DV6700. 
    Any help would be appreciated more than you know.
    System is Windows Vista 32 bit
    The guy on the phone said "well ya know thats a pretty old computer"...gee thanks..
    This question was solved.
    View Solution.

    You're very welcome.

  • Blue screen with error code and I have no recovery disks for HP Pavilion dv6-1260se

    I have a HP Pavilion dv6-1260se with factory installed operating system of Vista. When booting up the computer, I receive a blue screen with this error message: STOP:  c000021a {Fatal System Error}.
                                                                The verification of a KnownDLL failed.  system process terminated unexpectedly with
                                                                 a status of 0x0000221  (0x007fb9c0  0x00000000).
                                                                 The system has been shut down.
    I do not have recovery disks for this computer.  I tried to order them but them seem to not be available.  This is my daughter's computer.  She says she started to have trouble after downloading Frost Wire (music share) and then she removed it.  We tried going back to an earlier time and that didn't help and then the blue screen with error message appeared. What do I do now?
    This question was solved.
    View Solution.

    Hi,
    Assuming your in the US, recovery discs are available to order for that model here.  That may be the best option.
    You should also be able to do a recovery without the discs as well.  Take a look at this document: Recover Windows Vista Operating System Using HP Recovery, and look for the section Restore the PC to its original condition with the HP Recovery Manager if Windows Vista is not accessible.  This should allow you to recover the PC.
    R
    Although I am an HP Employee, I am speaking for myself and not for HP.

  • What is -2000F error code mean while doing Internet Recovery?

    My new macbookpro (1 hour old) crashed while trying to setup dual boot and now only works with internet recovery.
    But no matter how many times i restart and connect via wifi it always shows www.apple.com/support follow by -2000F in second line.
    What does this mean? Bad internet connection? None compatiable WIFI router? (Linksys E4200).
    Thanks

    Mike Yang wrote:
    My new macbookpro (1 hour old)
    You have 14 days to return the computer w/no questions asked.  Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
    Strongly suggest that you take FULL advantage of the above before it runs out.  Let Apple deal w/your problems.  A message board is the LAST place you should be.

  • Satellite C850-1NU does not boot Win 8.1 - Error Code 0xc0000098

    Windows 8.1 will not boot
    Laptop is *Toshiba Satellite C850 1NU*, as from Saturday it will not boot up!
    *Error states "The boot configuration Data File doesn't contain valid information for an operating system.*
    *File:\ BCD*
    *Error Code 0xc0000098*
    I have transferred recovery tools from another laptop to a USB stick and then enter bios of the Toshiba Laptop to make the USB drive to boot first.
    It then comes up with the recovery tools.
    I clicked on "Refresh your pc" it then reports "The drive where Windows is installed is locked. Unlock the drive and try again".
    I clicked on "Reset your pc" it then reports "Unable to reset your pc. A required drive partition is missing".
    I have also tried "Automatic Repair" and it reports "Repair couldn't repair your PC".
    I am at a loss as to get my sons laptop up and running again. Advice would be much appreciated. Thank you.

    Further to my question, *I have now resolved the issue.*
    Thanks to phanlon7 on this link
    [http://answers.microsoft.com/en-us/windows/forum/windows_8-system/windows-crash-refresh-hard-drive-locked-unlock/a6bb04ff-5dba-4e10-a849-644cd0851bc6?page=2&rtAction=1390385080363]
    I used a usb stick and copied recovery from another windows 8 laptop.

  • Error code 0xe0ef0038

    I got error code 0xe0ef0038 when using my recovery discs with a new hard drive.  Please Help!!!!!

    Sorry, unable to find anything on that error code, please confirm that the number is correct.
    Were these recovery disks made when you first got the computer?
    When you changed the hard drive was it the same size or greater to what you had and I hope it was not an AF hard drive
    Also please review this on how to change the hard drive in the event something was missed:
    http://support.hp.com/us-en/product/HP-Pavilion-p6​000-Desktop-PC-series/4079858/model/4161954/docume​...
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • Error Code 0xc000000e

    My daughters Satellite Pro C650-ez1522 has this error code 0xc000000e.We have no recovery disks.How do i recover the laptop. Everytime i restart i just get the " The Boot Selection Failed Because Required Device is unaccessable" Is there a way i can do a system recover without the disks.It has win7 pro    Help Me

    Satellite Pro C650-EZ1522 (PSC09U-01J01T)
    Satellite Pro C650-EZ1522 (PSC09U-01J01TB)
    Satellite Pro C650-EZ1523 (PSC09U-01J01T)
    Satellite Pro C650-EZ1522D (PSC2FU-00R005) <-- Amazon, CompUSA, Circuit City,..
    Satellite Pro C650-EZ1523D (?)
    I found all of those combinations listed on the web in various places. When you go here, what do you see for the Part Number?
       Start > All Programs > Toshiba > Utilities > PC Diagnostic Tools
    Is there a way i can do a system recover without the disks.
    See the section Recovering to out-of-box state (recommended recovery method), which begins on p. 64 of the User's Guide.
       Satellite/Satellite Pro C600 Series User’s Guide
    -Jerry

  • Tried to download ios 7. Connected to i-tunes and wants to restore my phone - says its in recovery mode. No other options available. Goes near to success then always get error code 29. Have tried to re-set my security software etc.

    My iPhone is now dead. Downloaded ios 7 by wifi on the phone. It then asked me to connect to i-tunes. I-tunes says the phone must be restored. Goes a long way down the restore and then get error code 29. I have tried turning off security software and firewalls as suggested by the Apple site but no difference. Can anyone help?

    Spent hours trying everything suggested and finally this morning hit on a solution. iTunes must be run as an administrator. Even though you are logged into your PC as an administrator, using the iTunes shortcut does not make you an administrator in iTunes. I found this out by using the diagnostics in iTunes and reading through the results report.
    I am using Windows 7, so I clicked the start button and right clicked on iTunes and selected "Run as an adimistrator". The first restore attempt got the 4013 error. I then did the DFU thing, hold power and home buttons for 10 seconds, release power and continue holding home for 10 more seconds.
    iTunes gave me the restore message and I clicked it. I clicked the restore iPhone button and it started. The drivers loaded a couple of times. I got the apple logo with the progress bar and this time instead of disappearing, it started to fill in.
    End result, a successful restore to factory settings and a happy 14 year old.
    Hope this helps others.

  • HT1414 iphone stuck in recovery mode cant restore error cod 2001

    My phone is not able to turn on and when i plug it in on a charger it just says plug into i tunes. When i plug it into i tunes it says its in recovery mode and its going to restore then my phone just restarts and it says unable to restore Error code is 2001 Anybody know whats wrong????

    Hi Matt,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694#error2001
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    Hope this information helps ...
    - Judy

  • How do I get rid of error code 2001/2006? My phone is in recovery mode. I have tried several different cords, all USB ports, my macbook, and a friends PC. This is the second time my phone has done this, the first time it was an easy fix.

    I have an iPhone 4. It is in great condition, always protected. A couple months ago, it randomly went black and wouldn't turn on. I put it in recovery mode, plugged it in to my MacBook Pro and would get error code 2001 then I'd get error code 2006. I read some different forums and many people said to try using a different USB port and different cords. The last cord I tried, worked and my phone was back. Last night, my phone did the same exact thing. So I used the same method I used last time, however nothing has worked. I tried plugging it in to a PC and that didn't work either. This seems like a hopeless problem that's going to continue to happen. Any advice?

    Soooooooo.... You obviously need to restore the device
    It seems that you have tried several options to restore it. What I would do is leave it plugged it and hold down the Home button AND the Power button together till you see the white apple appears. Then let go of the Power button but continue to hold the home button. You should get the message in iTunes again saying that the iPhone needs to be restored. Hit OK then RESTORE.
    Hope this helps!!

  • Lenovo G560 OneKey Recovery 7.0 error code 0xEB1b068A

    Hi 
    I recently purchased a Lenovo G560. First I turned it on I've tried to create DVD recovery (Default factory discs) but this error occured during the process: Failed: error code 0xEB1b068A. the softwar I used was neKey Recovery 7.0.
    I had tried it twice but it wasted me two DVDs already. I looked up on the web and I've notices that it's a common problem of the lenovo think-pad computers.
    If any one has the same problem that he resolved or if there is anyone who knws something about the issue please post your answers.
    Thank you
    Solved!
    Go to Solution.

    Admin note - this discussion had been combined with other discussion on OKR, but since this error code is specific and we have several different discussions already with different potential causes, it may be worth keep this one separate so that we can hopefully arrive at a specific solution on this case.
    Pooryamd,
    Thanks for your suggested solution based on that KB article.
    We've seen this error code come up a couple times year, and one scenario had to do with changes to the partition sizes. 
    So, aklee13, did you change any of the partitions?
    Another reason for the errror code might be that you are not running as the administrator on the system - if you have multiple user IDs on your system - if you are sharing the PC with someone else and have a log on for them.  Try right click and run as administrator.
    Searching a bit, I find same error code reported for ASUS system, so this doesn't seem to be a Lenovo unique issue, maybe something underlying in Windows.  Not assigning blame, just saying that there may be somethign going on that isn't specific to One Key Recovery.
    Can you tell us a bit more about your system and situation.  Have you made any changes to the system since you got it?  What kind of DVDs are you using?  Brand and type.
    The more you can share with the community, the more we can help.
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Hi i have an i phone 4 that unfortunately is just out of warranty, and when i plug it in to i tunes shows error code 9, i am due to buy a new phone and am looking at an i phone 5, can anyone advise me if the 5 is as unreliable and rubbish like the 4

    Can anyone advise me i have an i phone 4 and unfortunately when i plug it in to I tunes its picked up by the lap top but when it goes to reload with the bar on the screen it goes off and all i get is error code 9, i have tried for weeks to fix this and get no were if even tried putting on new firm ware ect but still has nothing, the sync is all grey so i cant click that, basically its a black bit of platic ive got here not an iphone and unfortunately one that has ran out of warranty. I have recently started my own company and need 4 contract phone 1 for me and 3 for my staff, i no the i phone 5 is a new phone so no will be able to tell me if its going to be as useless or unreliable as my 4,my staff are telling me to got for the 5 but im woried about waisting my money, or could any one advise me on an alternative for my lads. Thanks

    Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
    http://support.apple.com/kb/TS3694
    Solution below.
    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

Maybe you are looking for

  • The changes made in the WAD web template is not replicating on web browser

    Hi, We are using BI 7.0 WAD. Suppose if i create a one web template and if i run it ...it is working fine. If i change the present web template and if i do change anything on the present web template and if run this web template it is giving the prev

  • Prepayment / Downpayment

    I got to do some set-up on pre-payment. Is pre-payment and down-payment different ?  I know SAP has separate process for downpayment. If yes - do we have separate processs to handle them in SAP? If customer does pre-payment - we need to offer x% disc

  • Can't get Photoshop to run correctly.

    Hi I have a monthly CC subscription but can not update from Photoshop v14.0 which is now two updates behind. When I try to update I get a message telling me that Photoshop is up to date when it is obviously not. I also appear to be missing some featu

  • HT1918 itunes credit card info....

    i keep entering the correct security code on  my mastercard and it says it is invalid... help!!!

  • Photos uploaded by iPhoto not visible to Finder

    I took a bunch of photos at a friend's party on new year's eve. I had my powerbook with me because I only had two 256 SD cards for my HP camera. Each time I filled up a card I'd go upload into iPhoto with a Jumpdrive Trio card reader. Because the pho