Error code 2130932483 after 98% of burn complete [was:question]

im getting an error code of 2130932483 with 98% of a burn done on my photo elements. just started after months of perfect working

You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Similar Messages

Error code msvcr80 after last update now itunes will not open

Error code msvcr80 after last update now itunes will not open. Reinstalled and still does not work

Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
(98968)

Installed new HD on Mid-2009 MBP, installed Mavericks, now getting "error code -50" after being on for a while.

So I had the stock 320gb drive that came with my machine. It started crashing, so I pre-empted the loss of data and installed a spare Western Digital 500gb Scorpio Blue drive, installed Mavericks, and restored my data. Almost immediately I began having sporadic issues with the machine being unable to write to the disk, giving me "error code -50" after being on for about a day or so. I usually just restart and it will work for another day or so, but this is getting very tedious, and I'm a bit worried it might be straining the machine, since I can only hard restart (holding power button) when this happens. Usually, right after restarting, I repair the disk permissions, and this seems to fix things.
Is this maybe a bad OS install? Maybe I should back up and try it all again? Or is there a software issue I'm not seeing a solution for anywhere? Most people who are getting the "error code -50" messages seem to be getting them on external drives. Is it just a compatibility issue and I need to seek a new drive?

Thank you for the tips!
OGELTHORPE wrote:
I would check to see if the WD HDD has its own Sudden Motion Sensor. If so, it may be coming in conflict with the one in the Mac. If that is the case, I suggest disabling the SMS in the Mac.
WD5000BEVT does indeed have it's own protection:
ShockGuard™ - Leading-edge ShockGuard technology combines firmware and hardware advancements to protect the drive mechanics and platter surface to meet the highest combined shock tolerance specifications required for mobile and notebook applications.
Source: http://www.wdc.com/en/company/pressroom/releases/?release=3cd471a1-66be-46ba-9f6 7-e15298b0f8a0
Even though I read about it I had not touched any SMS settings in OS X since I did not have any problems before. I disabled SMS in Mac, let's see now.
Melophage wrote:
this could be indicative of a faulty internal SATA cable. /.../
Reteep,
you could try the same thing as well.
In my case I doubt it is the problem because it worked fine before Mavericks, although forcing restart may have done something. I hope disabling SMS helped.

I am getting error code 0x8002006E when trying to burn a DVD

Hi, I am running the latest Lion update, on my MB Pro, and keep getting the error code 0x8002006E when trying to burn a DVD. Could this be a dirty lens issue in the drive. I see that many others have had the same problem, but relly cant seem to find anyone that has a solution that works.. Help

marobinson58 wrote:
keep getting the error code 0x8002006E when trying to burn a DVD.
It's an error thrown by Mac OS X's DiscRecording framework (as opposed to an error communicated by the drive's firmware). The message is (as you probably saw)
"The burn failed because of a medium write error."
Could this be a dirty lens issue in the drive.
I don't think there's one single cause for this error. It might be a dirty lens. It might be something else. Not all recordable optical discs work well with all burners. Try a different brand.

CC app manager update failed with error code 50 after reaching about 35%

Trying to update the CC app manager. The update is always very slow (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?

Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks. I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
The user suggested fix that worked for me was:
1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
2) Started the creative cloud desktop app.
3) The app said it needed to be updated. I hit the update button.
4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
5) Restarted computer in normal mode.
6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time.

Error code -42404 after the 10.4.1 update

Anyone getting the error code -42404 after installing the 10.4.1 update? It appears when I open the itunes store, and tells me to restore my ipod to original settings. I've tried reinstalling and I still get the error. I'm running windows 7 64-bit.

Yes I have 10.5.1.42 and Win7 x64 and have just started getting the same error when iTunes starts up today - although I think iTunes has not updated for a while?
I have just restored my iPhone 4S to a 3GS backup this morning, and now I see this error and am unable to sync with the iPhone - I was able to do this last week.
Have reinstalled iTunes as it suggests but this has not fixed it.
Help!!!

Keep getting error code -50 when trying to burn a disc. how do I solve this?

Does anyone know how to solve the problem of getting "unknown error" code (-50) when trying to burn a disc? I don't know how this happened

marobinson58 wrote:
keep getting the error code 0x8002006E when trying to burn a DVD.
It's an error thrown by Mac OS X's DiscRecording framework (as opposed to an error communicated by the drive's firmware). The message is (as you probably saw)
"The burn failed because of a medium write error."
Could this be a dirty lens issue in the drive.
I don't think there's one single cause for this error. It might be a dirty lens. It might be something else. Not all recordable optical discs work well with all burners. Try a different brand.

I have paid for ipages 09 on 15/05 but never succed to enter the serial code. After 45 days, altough I was charged by 20 chf, I cannot completely use all ipages tools(impossible to save ). How can I get again the serial code I paid for?

i have paid for ipages 09 on 15/05 but never succed to enter the serial code. After 45 days, altough I was charged by 20 chf, I cannot completely use all ipages tools(impossible to save ). How can I get again the serial code I paid for?

Getting the request for a serial number means that at some time you had the iWork ’09 trial installed. You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user. The easiest way to fix the problem is to use Yvan Koenig's AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip. Download uninstall iWork '09.zip, decompress it, open it in AppleScript Editor and click the Run button.
Apple's support article on the subject says it's due to having a copy of the trial that is a higher version that the one you've purchased, but I'm not sure that is very common. This problem started with Snow Leopard & it seems to be some code in the iWork installers that doesn't do what it should.

Error code: sec_error_untrusted_issuer, after i add the exception, get the certificate i get a blank page with big letters NOT FOUND.

www.google.com uses an invalid security certificate.
The certificate is not trusted because it is self-signed.
The certificate is only valid for 78-159-121-201.local
(Error code: sec_error_untrusted_issuer)
After i add an exception for the site, i get this:
Certificate Status:
This site attempts to identif itself with invalid information.
Wrong site:
Certificate belongs to a diffrent site, which could indicate an identity theft.
Unknown Identity
Certificate is not trusted, because it hasn't been verified by a recognized authority.
And then a blank page with big letters "Not Found"
== URL of affected sites ==
http://google.com , www.youtube.com , www.omegle.com , www.lockerz.com

Do NOT add a security exception: someone is tampering with your internet connection!
When you ask to connect to these sites using https, Firefox gets a certificate from the website which responds. Anyone can make a certificate, but to be valid the certificate must be signed by an organization which Firefox trusts.
The person responding provided a certificate with its response which which was not signed by anybody, so Firefox doesn't know who sent the response, and neither do you.
In short: you asked to talk to google and google did NOT send the response.
As this is happening for several different websites, the attacker is probably on the network between your computer and the internet. Ask the people you get your internet connection for help: they may have had their computers hacked, may discover that the problem exists further along in the network, or they may even be responsible themselves.

Error code 0x80020000 while trying to burn a disc? What does this mean?

error code 0x80020000 while trying to burn a disc? What does this mean?

Take a look under 'More like this' to the right on this page.

Error Code 2130932483 When Burning DVD

does anybody know what code 2130932483 means? i get this error when trying to creat and burn a dvd with menu on photo elements
[Title edited for clarity - Hunt]

dicktatorsmith
We first need to determine what program is involved and the details of what you are doing?
You cannot burn your content to DVD disc (assumed DVD-VIDEO on DVD disc) with just Photoshop Elements and its associated Elements Organizer? So, if you are getting this error in your burn to disc, I am suspecting that you are not working with Photoshop Elements.
So, what program and version of it are you working with and on what computer operating system is it running?
The error that you present at burn has been seen before with no one description of what it means (that I have ever seen). Sometimes defragmentation of the computer hard drive and/or using another brand/type DVD disc resolves the issue. If you are in Premiere Elements burn dialog, does hitting the Rescan button a few times have any impact on the situation?
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-system-errors-freezes-burning.htm l
Please review, consider, and then let us know the outcome.
Thank you.
ATR

Error code 0x80020022 when trying to burn regular CD-R but reads still ok

My imac has an optical drive that reads & plays DVD's but only burns CD's. *At least it used to* burn CD's. Now when I drag files to be burned, I get this:
"Burning the disc failed because communication to the disc drive failed.
(Error code 0x80020022)"
The machine will *READ Cd's* just fine, and will *PLAY DVDs* just fine. It just refuses to burn CD's for me, even just a little jpeg or text file or something. Have tried alternate media, no difference. Is this some bug in Tiger, or are these drives just starting to fail, and how easy is it to replace this myself in a domed-base imac?
Everything's been fine for well over a year. Problem just started appearing last week. No new apps added, nothing clanged. Appreciate any advice. Stats follow:
Machine Name: iMac
Machine Model: PowerMac4,2
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 1
CPU Speed: 700 MHz
L2 Cache (per CPU): 256 KB
Memory: 384 MB
Bus Speed: 100 MHz
Boot ROM Version: 4.4.1f1
System Software Overview:
System Version: Mac OS X 10.4.3 (8F46a)
Kernel Version: Darwin 8.3.0
Boot Volume: Main Hard Drive
The drive: MATSHITA CD-RW CW-8572:
Firmware Revision: 2A11
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
Burn Underrun Protection CD: Yes
Write Strategies: CD-TAO, CD-SAO
Media: No

Me again (answering myself ... things must be bad huh? After posting I continued to work on the problem. I first used Onyx to run cleanup scripts and verify etc. Then I decided to follow the advise from one blog and burt 2.5GB onto a DVD using x1 speed instead of default x4. THIS WORKED ... slow but sure. Good luck and don't worry ... if this was a one off "I'll be back" to let you know!
Also check out 2005 threads I mentioned at
http://forums.macosxhints.com/archive/index.php/t-45310.html
and ...
http://ask.metafilter.com/24882/Cant-burn-a-CD-on-external-drive-on-OS-X
and ...
http://en.allexperts.com/q/Macintosh-OS-1063/DVD-burning-problems-5.htm
and ...
http://forums.macrumors.com/showthread.php?t=231076
and ...

Unexpected Error Occurred (error code -600) after Leopard Installation

Installed Leopard for the second time.
Everything seems to work fine, but after opening and then closing Mail, I'm unable to open it via the dock. Tried to open by selecting from the applications menu, and get the following message:
The operation could not be completed.
An unexpected error occurred (error code -600)
Same thing with Backup, Parallels too.
Shutdown behavior is odd. From the apple icon, shutdown doesn't work, everything goes away on the desktop, then the spinning wheel (not beach ball), then nothing. Have to power off to quit, can't be good for the hardware.
Any suggestions, or am I doomed to a clean install and reinstalling all of my applications? Thankfully I have a drive backed up with SuperDuper with 10.4!
Thanks for the help.

OK, I've got ContentBarrier X4 installed and this was the cause of my error codes and it looks like several - if not all of my installation issues with Leopard.
Apparently, perhaps with Login KeyChain update, it wiped out the ContentBarrier administration name, and on launch, it was likely blocking the applications.
First, install the Login KeyChain update (see Apple software download page).
Reinstalled ContentBarrierX4 http://www.intego.com/services/updates.asp (make sure to select ContentBarrierX4).
Open ContentBarrierX4 - you'll have to sign in as the administer. You may have to go into Preferences > Accounts > to make sure that you've got admin rights.
Once you logged in, exit, then reboot.
For the first time since installing Leopard, I can shutdown without a hard power off.
Salvation...

Error code 1007F after file with question mark?!

I have a 13 inch MacBook pro which is just over a year old. For the past week or so it hasnt been connecting to my university wifi network, eduroam. Then this morning, when it started up, I received a blank screen with a question mark flashing, which I know is an error with startup. I followed advice on here and got to the Internet recovery stage. I got past that and had to wipe my hard drive, and was in the process of reinstalling OS X Mavericks when I lost connection (it was tethered to my phone as eduroam wasn't working). I have since rebooted but when I get to the internet recovery stage I am receiving error code -1007F. None of the advice so far on here has worked. Please help?! (And please note that I am a 19 year old who has very little technical knowledge)

First, you need to get a reliable Internet connection, preferably Ethernet.
Install OS X Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Error Code Ox8002006E when trying to burn files. Why? What can I do

I keep getting this error code and can't burn anything without getting it. Don't know what to do?

Have you checked if there is any video content in the file as I have just reburnt a number of disks after removing vidoe and have had no problems
Verbatim DVD-RW 4.7gb 6x

Error code 2130932483 after 98% of burn complete [was:question]

Similar Messages

Maybe you are looking for