Error Code 2300 on Restore after failed Os4 upgrade.

Pretty simple. Attempted to upgrade to the new Os4 with a 2nd gen iPod touch. For whatever reason, iTunes recognizes it, but the update failed which sent it into recovery mode. After 6 attempts at a restore, error code 2300 doesn't fail to pop up while preparing the iPod for restore. I've also tried 3 different USB ports- aiming for different computers later in the day. I don't want to have to invest money into a newer iPod - even though this one is 1 1/2-2 years old just about. Thankfully music is on the computer happily waiting to be loaded back in - so the only issue is getting the iPod itself to restore or SOMETHING. Paper weight - no thanks.
Any help is appreciated.
-Mare.

I have the same issue. from what i've gathered the issue is with the data transfer via usb
try a different computer

Similar Messages

IPhone won't restore after attempted os4 upgrade

Like everyone else, I started updating last night (well this morning, at 1am) and after an hour of nothing happening, I impatiently unplugged the iphone, and wiped the phone, in an attempt to speed it up (at this point I hadn't read that other people were having similar problems)
After 7 hours of sleep the phone had still not restored successfully. The iPhone itself is stuck at 2/3 complete and iTunes says "Restoring iPhone software" and was stuck at what looked like 95% complete.
After an hour, it became stuck at around 97%. iTunes still works as I can use it to play songs using the keyboard controls and it does not offer me the option of force quitting (unless I use the force quit menu). I tried unplugging the phone again, and trying again, in case something somewhere had frozen.
The phone then asks to be plugged into iTunes, where it attempts to restore back to factory settings. It quickly restores until both phone and tunes get stuck at the exact same position.
I'm over an hour away from an Apple store.. Any suggestions?
And while I'm asking, will o2/carphone warehouse accept this phone as a trade in on Thursday when I go to buy the iPhone 4, or will they only accept fully working phones?
Thanks in advance.

Finally it updated to iOS5.
But EVERYTHING has disappeared off my iPhone. Music, photos, movies, podcasts, all installed apps.

Error 1604 - Can't restore after 2.0 upgrade

I have already reported this problem to Itunes and made a visit to the "Genius Bar". It was bricked during the firmware upgrade to 2.0 and all the Genius bar could do is restore it to the previous firmware even though I have a receipt showing I purchased 2.0. Ugh!!
Anyway, in searching my hard drive, I cannot find the 2.0 firmware and it looks like it never downloaded in the first place. I have searched for files with ipsw extension and there's nothing, anywhere. Are you allowed to download again for free? Maybe this is why it bricked trying to load a file that wasn't even there? Any insight and/or help greatly appreciated!

People who have still not solved error 1604 and had a bricked iPhone no matter what they tried, might manage to revive it by following these instructions (on how to downgrade from 2.0 to 1.1.4).
You will need the following:
- iTunes 7.5 (NOT 7.7)
- iPhone firmware iPhone1,11.1.4_4A102Restore.ipsw
Step 1:
Uninstall iTunes 7.7 completely if you have it and restart your computer.
Step 2:
Install iTunes 7.5
Step 3:
Your iPhone should be in 2 states, either stuck on the "Slide to make emergency calls" screen, or you tried to restore before and it's stuck on the new look "connect to iTunes" screen. Either way you're ok.
Enter the phone in DFU mode (You must have the iPhone connected to the computer and iTunes running). To do this, hold the power & the home button down for about 9 seconds.
Why 9s? Well people say 10s, but it depends how slow you are at counting. Too short and it doesn't work, too long and the apple logo appears.
When you hit about 6-7s the screen should turn off, leave it for 2 more seconds and release the power button, STILL holding the home button. If all went well, you should NOT see an apple logo, the screen should be dead.
Keep holding home until windows/Mac informs you that it's found new hardware, OR iTunes tells you that your iPhone is in recovery mode. Remember, screen should be blank.
If you see an apple logo, repeat the process for less time until you get it right. Took me a little time.
Step 4:
Shift/Option click the restore button in iTunes and select the iPhone1,1_1.1.4 firmware you downloaded.
Fingers crossed it should restore back to 1.1.4.

Getting error code 2300 when trying to restore iphone

I keep getting error code 2300 and can't restore my iphone. Any suggestions?

Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
If you also unsuccessful on another computer then time for an appointment at the Genius Bar of an Apple store. It would see that your iPod needs service as specified in the article.

TS3694 1656 is my error code i cant restore my iphone or update please help

1656 is my error code i cant restore or update my iphone please help

Follow the steps mentioned in this thread.
https://discussions.apple.com/thread/2778443?threadID=2778443&tstart=0

TS3694 How to resolve error code 1015 in restoring apple iphone. Please guide

How to resolve error code 1015 in restoring apple iphone. Please guide.

Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

What does this mean? Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.

This is the error that we get when we run the Tag File.
ERROR 04/16/2004 02:26:15 PM Server ERROR from Server: National Instruments.OPCLookoutDrivers. Status: -196608, Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.
What does it all mean?

ACRE,
this looks like the Industrial Automation OPC Server (Lookout OPC) is not correctly installed or configured and therefore the DSC Tag Engine - as OPC client - cannot launch the OPC server correctly.
Two checks I have in mind.
- Installation check: Check if the Industrial Automation Server is installed and configured correctly and that you will have a .lpd file as default. Could it be that the .lpd file is corrupted? BTW - what kind of protocol are you using and did you configure aliases for the LPD object? A good resource on checking the configuration might be the online help of Industrial Automation Server (Lookout Protocol Drivers) or the link penDocument>How Do I Configure My Devices with Lookout Protocol Drivers?
- Access rights, COM/DCOM problems: Can you launch the OPC Server with another OPC client? Is your OPC server running locally? If you don't know how to check on this I found a good KB Tools for Troubleshooting OPC Interface Problems E.g. can you access it with Server Explorer?
Last question... did you encounter this problem recently while it was working before? What changes have been done on your system?
Let us know if you have some questions and I hope some of the links help you further troubleshooting this issue.
Roland

How do i fix error code 1611 and restore my iphone 4

how do i fix error code 1611 and restore my iphone 4

The music continued to play with the iPod?
If so, when a call is received while listening to music with the iPod, when the call is answered the music should be paused. When ending the call, the music starts playing again from where is was paused.
There is no automatic mute with notifications for received email or messages while on a call and there is no setting for this.

I-tunes does not recognise ipad to restore after failed update to ios 5

i-tunes does not recognise ipad to restore after failed update to ios 5. Connected i-pad to update to new ios 5. Back-upp went fine but update failed and now i-tunes does not recognise the devise and i-pad will not work so I have no known way to restore.

Copied from that article.....
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
Are you releasing the home button when you see the connect to iTunes screen? Does iTunes start on its own? If it doesn't - start iTunes yourself.
Also copied from the article.....
5. If necessary, open iTunes. You should see the following "recovery mode" alert:

Error code: 3194 when restoring.. "Secure link to iTunes store failed" when diagnostics is ran..

as mentioned in the title, I have encountered 2 errors, one is when I am trying to restore my iphone and the other when iTunes diagnotics feature is ran..
I have read the information about the diagnostics result and saw something like "connection attempt to firmware update server unsuccessful". Because of this information I have concluded that the "error code 3194" happens because iTunes itself is unable to connect to the "firmware update server".
I am using Windows 7 64-bit and iTunes is now on the latest version.
below are the things I have done so far, but to no avail:
- removed/disabled my antivirus program
- put iTunes to exception list of WIndows Firewall
- disabled windows firewall and windows defender
- re-installed iTunes and made sure that it is of the latest version (version 10.6.1)
- performed recommendation from: https://discussions.apple.com/message/17409780#17409780
- perform flush dns command using command prompt
In addition to the steps I mentioned, I also tried running the diagnostics on two other computers running on different versions on iTunes, 10.5 and 10.6.0. I also did the same steps as above on these two computers, but I am getting the "secure connection to iTunes store failed" when the diagnostics were ran.
thanks for any help that you can give.

I think its weird that I experienced both the 3194 error code and "secure link to the itunes store failed" diagnostics error on three computers running on different OS (XP, vista and 7), itunes version and connectivity types (wireless and cabled). Could it be possible that there is a problem on Apple's server?
Are you still there, shintenhouji?
Perhaps try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(I've seen a few cases in recent times of this sort of thing being associated with LSP issues.)

Secure Connection Failed: Error code: ssl_error_illegal_parameter_alert - New problem after website moved to new server.

My website was migrated to a new cloud server last week and after the move visitors to my site using Firefox have been intermittently receiving the following error when visiting a https:// url.
Secure Connection Failed
An error occurred during a connection to www.url.com
SSL peer rejected a handshake message for unacceptable content. (Error code: ssl_error_illegal_parameter_alert)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
Upon a few refreshes the page may load again but often very slowly and often not all images will load.
The web hosts have tried many things, have had cpanel techs check the server and even set up a new ssl certificate to try and resolve the problem with no luck.
Researching the internet shows that people have faced this issue when upgrading Firefox or with certain AntiVirus software conflicts.
However I can't tell all FF visitors to start altering their config files in order to be able to visit my site.
I don't understand how I didn't have this issue prior to the migration but now something has changed that no one knows how to resolve.
For reference: I am using FF 28.0 and I am not experiencing this SSL error on any other site other than my own since the migration.
Does anyone have any information on what the web host may be able to do to fix this SSL issue that only occurs for FireFox users?
Thank you for any suggestions you may be able to offer.

Still experiencing this problem and hoping someone may have some ideas to try on the server.

I keep getting an error code -69 when restoring my itouch

downloaded io5. when i tried to restore my music, got an error message saying cannot sync file not found. error code -69 or -49

IMO Adobe left a Program out of the typically list namely Photoshop
Troubleshoot Update Errors
Many update errors are caused by missing or modified files required by Photoshop, typically by a disk cleanup utility (Ex: CleanMyMac, MacKeeper, etc). Make sure you have the latest updates for your clean-up utilities or discontinue use.
Explanations of error codes:
U = Updater.
44 = Install Update Error
M1 = Automatic
M2 = Standalone mode
P = Patcher
6 = Done With Errors
7 = Installation Failed
ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
ISSUE: The adobe update 13.0.1.2 errors with code U44M1I210.
SOLUTION: Restart your system, download and install the updates manually. See “Solution 3″ here. http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
========================================================================================== ======================================================
To fix the update install problems I've had with CC I use the direct installer I downloaded from Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools Follow the download instruction to the letter otherwise you will be denied access. Once to have it. Install CC on top of itself. That will back level CC to CC version 14.0. Then use Photoshop menu Help>Updates. All updates should install and all the extensions and addition you made to cc will still be there.

I have an (-1) error code and cannot restore my I Pad2

I have an (-1) srroe code and cannot restore my I Pad 2, any solutions

Usually a 1 or -1 error indicates a hardware problem.
See 2nd link below.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

TS1702 i keep receiving an error code during my restore

I'm trying to restore my iphone to original settings because it is jailbroke and keeps giving me a hard time. It begins to download and midway I receive an error code and then I get disconnected from my sync. How can I update and restore my phone?

Jailbreaking your phone not only voids any remaining warranty, but forfeits your right to assistance from Apple, including from this forum.
Discussion of jailbroken phones is strictly prohibited by the Terms of Use that YOU agreed to by signing up to post here.
You'll need to look elsewhere on the internet for assistance. I'm sure you're aware that jailbreaking often permanently damages the phone making it forever useless. Start saving up your money.

Any possible way to fix error code 28? Restore doesn't work and my ipod won't turn on.

One day my ipod just wouldn't turn on and from then on it has been a total black out. I have plugged it into iTunes and it has notified me that the ipod is in recovery mode. I tried to restore the iPod but right at the end it brings up the error code of 28.
I don't want to fork out a lot of money for a new ipod, so if anybody could help me that would be great. Please share your knowledge if you have experienced this and know how to fix it, your help would be great. Thanks!

Error 20, 21, 23, 26, 28, 29, 34, 37
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Note it could be a hardware problem If you can't get it to work an appointment at the Genius Bar of an Apple store is in order.

Error Code 2300 on Restore after failed Os4 upgrade.

Similar Messages

Maybe you are looking for