Error code 2330. I cannot install or uninstall itunes  HELP PLEASE

I've tried SEVERAL times to download & update my itunes and keep getting error code 2330.  As suggested in other Q&A's, I've run disc check to clean the hard drive, but that's as far as my knowledge goes. I can neither install or delete itunes. What can I do ?  There must be a fix, how do I find it ?

You might need to run the Windows installer cleanup utility....start the troubleshooter for assistance at the following link:  http://support.microsoft.com/kb/2438651/

Similar Messages

  • I cannot install or uninstall itunes.  I get error message 2324?????

    I cannot install or uninstall itunes.  I get error message 2324?????

    You might need to run the Windows installer cleanup utility....start the troubleshooter for assistance at the following link:  http://support.microsoft.com/kb/2438651/

  • TS3694 Has anyone ever had an error code -1202? Cannot find any info on it, please help

    Has anyone ever had an error code -1202? Cannot find any info on it, please help

    Have you looked at the previous discussions on the right side of this page under the heading "More Like This"?

  • I have error code 2330 when i tried to download itunes 10.5, how do I fix the problem?

    I have error code 2330 when I tried to download itunes 10.5. Different sites I have visited give different solutions and most seem to indicate removing the current itunes program then reinstalling the new 10.5. I did try to remove the program but it took a long time and I had to reboot the computer. Has anyone had the same issue and how did they fix the problem?

    I was having this problem with my wife's computer today so I did a Check Disk from the command prompt. (start/run then type chkdsk) let it do its thing then restart windows and it does some other BS on the start up. Relaunch itunes and then retry to download. I went to the apple website and click on the download and saved the file to my desk top then ran it from there. Let me know if you have the same luck. -Mike

  • I keep getting error code 2330 while trying to update my itunes. I'm not able to udate, repair or uninstall., I keep getting error code 2330 while trying to update my itunes. I'm not able to udate, repair or uninstall.

    I'm getting error code 2330 when I try to update my itunes. I'm not able to update, repair or uninstall!!!!

    Hi I was having the same problem using ADE 2.0.
    I contacted the LiveChat support (link button did not show when using Firefox 31), which gave me this link. http://helpx.adobe.com/digital-editions/kb/error-e_act_not_ready.html 
    After I edited the Registry and then restarted ADE I was able to ReAuthorize my machine.  Hope this works for you.

  • Not able to download  10.5 file corrupted ja.lprog - file is empty error code 2330. Not able to unistall itunes to reinstall-same info given. Not able to dowloag on another drive or under another user account.  same info given,  Using windows vista 32bit.

    Not able to download itunes 10.5..says file ja.lprog is corrupted (its empty) and error code 2330. Not able to download/install on another drive...even external drive-same reason given.  Not able to uninstall itunes to reinstall...same reason given.  Using windows vista 32 bit.  Please help.  Difficult to upgrade apps.

    Yeah...I think I found that one out the hard way already. I'll cross that bridge when I get to it. I want to get this issue fixed before I start thinking about the license issue.
    ciscoasa#
    ciscoasa#
    ciscoasa#
    ciscoasa# sh flash
    --#--  --length--  -----date/time------  path
    2403  0           Apr 30 2008 02:00:56  test
    2285  196         Apr 30 2008 01:28:20  upgrade_startup_errors_200804300128.log
    2283  0           Apr 30 2008 01:28:20  coredumpinfo
    2284  59          Apr 30 2008 01:28:20  coredumpinfo/coredump.cfg
    2280  0           Apr 30 2008 01:27:56  crypto_archive
    2267  0           Apr 30 2008 01:27:38  log
    0 bytes total (0 bytes free)
    ciscoasa#
    ciscoasa#
    ciscoasa#
    ciscoasa# sh disk0
    --#--  --length--  -----date/time------  path
    2403  0           Apr 30 2008 02:00:56  test
    2285  196         Apr 30 2008 01:28:20  upgrade_startup_errors_200804300128.log
    2283  0           Apr 30 2008 01:28:20  coredumpinfo
    2284  59          Apr 30 2008 01:28:20  coredumpinfo/coredump.cfg
    2280  0           Apr 30 2008 01:27:56  crypto_archive
    2267  0           Apr 30 2008 01:27:38  log
    0 bytes total (0 bytes free)
    ciscoasa#

  • Getting error message2324 when downloading the new update for itunes help please

    getting error message 2324 when downloading the latest update of itunes help please.
    Will not let me uninstall itunes from my computer, gives me the message that I don't have access need administrator. ( I am the only user of this computer)
    Thank you
    Chris

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • Cannot install or uninstall iTunes

    When I tried to install the new V10.2 over 10.1.1.4 I continually got a message stating "The path to "c:.......iTunes64.msi" cannot be found. Verify that you have access to this location and try again, or try to find the installation package "iTunes64.msi" in a folder from which you can install the product iTunes.". I checked the path and the file is where it says it should be. So, I moved the file to the desktop and tried to run if from there but got the same message. So I tried to uninstall iTunes as suggested in the online support but couldn't uninstall as I got the same message. Now iTunes won't run at all. Help.

    "c:.......iTunes64.msi" cannot be found. Verify that you have access to this location and try again, or try to find the installation package "iTunes64.msi" in a folder from which you can install the product iTunes.".
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.

  • Error code 0x80020063 when trying to burn cds. HELP PLEASE

    I have a brand new Macbook Pro, less than 90 days old and am having CD burning issues.
    Every other cd I try to burn it fails at the end when it goes to verify the CD. This is getting old as I am throwing away half my CD's. I have searched all over and cannot find a fix. HELP, whats the deal here.

    If this is the error (error code 0x80020063) then it may be happening on verification. The second time it occurred I popped the disk back in and ran disk utilities to verify the "faulty" CD. It came up clean. When I double clicked on it, all the files I had copied were there. I even opened a few to make sure. It may be a spurious reading—at least it was in my case. Hope this helps.

  • Cannot install or uninstall iTunes 10.4

    Keep getting error 1336 system error 5 Cannot write to file C:\program files\itunes\mozilla pluging\npitunes.dll Verify you have access to file. At a loss as to the problem, I verified access, tried running as administrator, tried changing install folder and all results in same error

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Error installing/uninstalling itunes help please

    hello,
    got the latest itunes, and recently i had some hd troubles, so i had to restore my system from acronis (restored the partition using a backup i created).
    i try starting itunes and it doesn't want to work. i try installing/uninstalling and it doesn't want to work either.
    i get this message:
    "The folder path "My Pictures" contains an invalid character."
    i tried restoring 'My documents' to it's original and default locations, but i can't seem to get itunes to run.
    any1 know how to fix this ? thanks.

    It's a simple fix and doesn't involve reinstalling anything.
    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the libxml2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "libxml2.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "libxml2.dll" to the location.
    5. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • Since updating my computer i cannot install or open itunes, help!!!

    Since updating important installations on my computer i cannot open itunes. I unistalled it after hours of trying and now i can even install the software. very frustrated and confused can anyone help??

    Hi adora,
    Welcome to the Discussions.
    .exe are Windows programs. You need programs written for OS X. Most will be .dmg files (disk image) and will mount on the desktop just like a hard drive. With most you just drag the applications icon to your applications folder. Others need Stuffit Expander to decompress the file before installation.
    John

  • Error Code 1120 access of undefined property...help please

    I am fairly new to Flash - I have CS4 and am not sure if I am in the right place to get help.
    I am trying to build a click through gallery with small buttons that you click on and it switches the larger image out as you click through.
    I copied over a gallery I had successfully built with 10 images.  The new gallery has 20 images.
    Basically the movie just runs continuously without being able to click on the thumbnails.
    I am getting the following compiler errors
    Scene1 Layer 'actions', Frame 1, Line 42 1120:Access of undefined property btn11_btn Source - btn11_btn.addEventListener(MouseEvent.CLICK, showimage11);
    I get this for image 11 through 20
    The following is my code
    stop();
    btn1_btn.addEventListener(MouseEvent.MOUSE_OVER, showimage1);
    function showimage1(event:MouseEvent):void {
    gotoAndPlay("label1");
    btn2_btn.addEventListener(MouseEvent.CLICK, showimage2);
    function showimage2(event:MouseEvent):void {
    gotoAndPlay("label2");
    btn3_btn.addEventListener(MouseEvent.CLICK, showimage3);
    function showimage3(event:MouseEvent):void {
    gotoAndPlay("label3");
    btn4_btn.addEventListener(MouseEvent.CLICK, showimage4);
    function showimage4(event:MouseEvent):void {
    gotoAndPlay("label4");
    btn5_btn.addEventListener(MouseEvent.CLICK, showimage5);
    function showimage5(event:MouseEvent):void {
    gotoAndPlay("label5");
    btn6_btn.addEventListener(MouseEvent.CLICK, showimage6);
    function showimage6(event:MouseEvent):void {
    gotoAndPlay("label6");
    btn7_btn.addEventListener(MouseEvent.CLICK, showimage7);
    function showimage7(event:MouseEvent):void {
    gotoAndPlay("label7");
    btn8_btn.addEventListener(MouseEvent.CLICK, showimage8);
    function showimage8(event:MouseEvent):void {
    gotoAndPlay("label8");
    btn9_btn.addEventListener(MouseEvent.CLICK, showimage9);
    function showimage9(event:MouseEvent):void {
    gotoAndPlay("label9");
    btn10_btn.addEventListener(MouseEvent.CLICK, showimage10);
    function showimage10(event:MouseEvent):void {
    gotoAndPlay("label10");
    btn11_btn.addEventListener(MouseEvent.CLICK, showimage11);
    function showimage11(event:MouseEvent):void {
    gotoAndPlay("label11");
    btn12_btn.addEventListener(MouseEvent.CLICK, showimage12);
    function showimage12(event:MouseEvent):void {
    gotoAndPlay("label12");
    btn13_btn.addEventListener(MouseEvent.CLICK, showimage13);
    function showimage13(event:MouseEvent):void {
    gotoAndPlay("label31");
    btn14_btn.addEventListener(MouseEvent.CLICK, showimage14);
    function showimage14(event:MouseEvent):void {
    gotoAndPlay("label14");
    btn15_btn.addEventListener(MouseEvent.CLICK, showimage15);
    function showimage15(event:MouseEvent):void {
    gotoAndPlay("label15");
    btn16_btn.addEventListener(MouseEvent.CLICK, showimage16);
    function showimage16(event:MouseEvent):void {
    gotoAndPlay("label16");
    btn17_btn.addEventListener(MouseEvent.CLICK, showimage17);
    function showimage17(event:MouseEvent):void {
    gotoAndPlay("label17");
    btn18_btn.addEventListener(MouseEvent.CLICK, showimage18);
    function showimage18(event:MouseEvent):void {
    gotoAndPlay("label18");
    btn19_btn.addEventListener(MouseEvent.CLICK, showimage19);
    function showimage19(event:MouseEvent):void {
    gotoAndPlay("label19");
    btn20_btn.addEventListener(MouseEvent.CLICK, showimage20);
    function showimage20(event:MouseEvent):void {
    gotoAndPlay("label20");
    Any advice would be great
    I dont know if I have to start from scratch - which would be a pain for sure
    Thanks

    I feel foolish - I solved my own problem!
    I figured out that I had not given buttons 11 - 20 an instance name
    Once I did that - voila problem solved
    Sorry for bothering you all.

  • :"Required File Cannot Be Found' Ipod + Itunes Help Please.

    Hey
    I have accidently deleted some files from my Imac, since then I have been receiving a message in Itunes when I try to upload Photos to my Ipod which says ,'Required file cannot be found'.
    Is there any downloadable software to restore the missing files?
    (Would be prepared to pay for the software)
    Thanks In Advance
    Ricky

    Never mind, I figured it out. I think the name contained a symbol that the specific file type wouldn't recognize for a file name or the file name was too long. I shortened and took out the symbol and it worked done. Then re-added them back in the track name once I had it on iTunes. All is well. Answered my own qustion before anyone had the chance to help me, I'm good ;)

  • Cannot either install or uninstall iTunes

    I tried to update iTunes with v12.1.2 on my Win 8 64-bit computer by running the installation file over the current v12.0 and the installation failed. This is what occurred:
    1. The initial error I received was that it did not have access to the "C:\Program Files (x86)\iTunes folder. It then took about 10 minutes to do a "roll back".
    2. I then tried to uninstall the current iTunes and I received an error 2324.
    3. I then uninstalled all the Apple auxiliary programs (Update Service, Bonjour, etc.) and removed all the Apple associated folders.
    4. Ran the install again, failed again.
    5. I took a restore point before trying the initial install, so I restored the system to that.
    6. Tried the uninstall again, received an error that I was missing files and had to reinstall iTunes.
    CATCH 22. Cannot install or uninstall iTunes. I have not been able to do a clean update of that program for a good year. I should have known better and gone through the total uninstall/removal process first before trying the install. Any suggestions would be appreciated.
    Thanks,
      JohnD

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

Maybe you are looking for

  • With CS2 (Win XP), why am I not able to see a print option for 13x19" output?

    I have printed smaller pages, 4x6 and 8x10 inch, with my CS2 to my HP Photosmart Pro B9180 printer.  However, I am now ready to print 13 x 19" prints and there is not option in the printer setup in CS2 to select it.  I even converted 13x19 to 330mm x

  • Recording error File not found message?

    I am trying to record onto an audio track in logic. When I push the record button a error message comes up: File not found result code-43?? What does THAT mean? As long as I have a audio track selected, nothing works. I push play,..same error message

  • From Cover Flow repeat / play album only?

    Is there a way to have iTunes play/repeat just an album when selected via Cover Flow? (It's probably just me not seeing the option.) When one selects an album via 'Grid View -> Albums' only that album and its songs get selected. That's exactly what I

  • Recommend me an audio interface

    I need an audio interface - PCI, Firewire or USB-2 - with a bunch of inputs and outputs (min. 6 in, 4 out), a couple of universal XLR/minijack input jacks with good pre-amps and, here's the clincher, separate level controls for headphones and monitor

  • No error but...

    i have this form that i created following this book. everything was going fine until now. this is the page : Text As everyone can see, when clicking "View Urls" it suppose to show the list of categories in the drop down menu saved in my url table. bu