Error code 2753

i installed virtualbox 316 and got the error code 2753. i found no information on the web site about installation error codes.

I found the answer on this post
https://discussions.apple.com/message/16191253#16191253

Similar Messages

Unable to install lightroom 3.6 error code 2753

Had issues with my computer today (windows 7 64 bit) finally was able to get a restore point that would allow the machine to access windows and all the programs (including Photoshop CS5) were functional except lightroom 3.6. I was not able to have the windows un-installer remove lightroom so I had to go and do it manually. I downloaded another copy from Adobe. When I try to install I get the error code 2753. The file Lightroom.exe is not marked for installation. I checked the FAQ's and there was only one reference to that code but it refered to lightroom 2.0 software installation. I re-installed lightroom 2.6 with no problems and I tried installing the 3.6 software after installing the 2.6 version. I had no luck still receive the 2753 error code. When I initially installed the 3.6 version on 12/4 there were not issues and the software worked with no problems. Any ideas / suggestions? Thank you.

Hello Jeff, Thanks for the reply. What had occured was when I was working inside of Lightroom one of those balloon messages popped up making note of a hardware driver not working or missing, I really did not pay attention to be honest I thought it may have had something to do with the download of files off of the compact flash card. After downloading the files into lightroom I turned off the machine. Later on when I came back to work on the files the machine would not boot up into windows 7 instead a sort of chkdsk utility initiated, after it finished checking the disk I was given the option of going to a previous restore point, the first time it did not work. On the second try with a different restore point selected I was able to bring up windows. Everything was working except for the lightroom software. After running Registry Reviver and also optimizing the registry I still was unable to get lightroom to work.
I decided to download another copy and re-install. Well the first trouble encountered was not being able to un-install the software from the control panel utility so I tried installing the software without the old software being removed, that is the first time I received the 2753 error code. I checked adobe.com FAQ page and the only mention about this code was in reference to the 2.X version. I tried the procedures there anyway. Still no success with the error code 2753 still coming up. I then decided to remove the software manually from the computer (only in windows, did not go through DOS or to regedit). I again ran Registry Reviver software and tried installing the software again with no success still.
Finally I decided to google the error code 2753 and review what was actually happening. Part of the instructions to clear the code required me to download some software that microsoft created (msicuu2) that would force the removal of the lightroom software from my machine (it was still showing up in the control panel un-install eventhough I removed it from the program file in windows). I again ran Registry Reviver and Optimized the registry, re-booted the machine gave it another try and this time I had success.
I am happy to report that Lightroom is working without any problems. I cannot say with any certainty what caused the problem initially for all I know it could be just a case of SH's syndrome.
I took note in your reply about the stability issue, I will pay more attention for now to see if there is a re-occurrence of this or a similar problem and then address it at that time. I would like to mention that I did not loose any photo files or have any files corrupted due to this problem........ so I am thinking more a windows problem as you alluded to in your reply than it being a Lightroom problem.

J6450 printer error code 2753

I have tried everything and I keep getting the same code 2753. How can i fix this. I'm using Vista.
Thanks,
Dave

Hi Msbkkp,
I think you are posting on wrong forum. This forum is to discuss CLR programming issue. Please post your problem on the following link.
http://answers.microsoft.com/en-us.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Bootcamp error code when installing drivers from lepard disk

hello everyone
ive just tryed to install windows on my new mbp and it was all going great till i put in the lepard disk to install the drivers
the disk starts up and appairs to start inputing the new drivers when is stops and tells me there is an error "code 2753"
im not sure what to do next to fix this anyone have any ideas?
thanks
sean o'hare

You might want to ask that question in the Boot Camp forum.

IBank error code

Good evening! When I use the widget to use iBank I get an error code -2753 and I cannot find anything about why I am getting this. I can use the main app just not the widget part. Any suggestions.

Hi ThePapaDot,
The 5100 error may indicate that an ink tank(s) is not seated properly, paper is jammed or there is an object inside the printer, the printer needs to be reset or the encoder film/strip may need to be cleaned. To try and resolve the error, please click on each of the links located here and follow the directions provided.
If you still experience difficulty, the printer will require servicing; please call or email us at one of the methods on the Contact Us page for your servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Cre...

Sir/Madam,
i am working on Windows Platform and I am getting this error when i want ot configure the LDAP.
Please suggest
javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Credentials]
     at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3005)
     at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2951)
     at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2753)
     at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2667)
     at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:287)
     at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
     at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193)
     at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(LdapCtxFactory.java:136)
     at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:66)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:197)
     at javax.naming.directory.InitialDirContext.<init>(InitialDirContext.java:82)
     at TestClient.main(TestClient.java:33)
Thanks in advance.
Regards
Neelamadhab

javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Credentials]LDAP is rejecting your credentials (username / password). Make sure your credentials are coorectly given, otherwise get help from LDAP admin.
regards,
Sekar

Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport. I've been using the passport for about a year now without any problems on older Macbooks in my house. I used to be able to read and write to this drive no problem. I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive. When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem. If I try to delete that folder I just created, I get this error:
The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
(Error code -36)
The folder has nothing in it whatsoever. I just created it. But if I go to Terminal and I run
rm -rf "untitled folder"
This works fine. Why is Terminal acting different than Finder? This does not happen on my other Macbooks. Thanks in advance.

Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

Report generation failed----error code:-17205; Access Denied.

Hi, All
    i have a trouble about report generation.it seems the error happened at the "write UUT report"--this step is teststand report generation'DLL.
    detail:
    An error occurred calling 'Save' in 'Report' of 'NI TestStand 2010 SP1 API'
Access Denied.. Error writing to file 'D:\program\seq\xxx.xml'.
The file might be open in another application. If file access is intermittently denied, you should try disabling the Microsoft FindFast utility.
    error code:-17205; Access Denied.
    locationtep 'Write UUT Report' of sequence 'Single Pass' in 'SequentialModel.Seq'
    How to fix it?
    Thanks a lot.
BR

Hm, it looks like the file might be open in another application. If you see that file accesss is intermittently denied, you should try disabling the Microsoft FindFast utility.
CTA, CLA, MTFBWY

There was a recent upadate on my PC, however it does not work. A error code comes up which says, min version is not compatible with max version. And I caanot open my browser. Please help.

I do a system restore which allows me to open my browser. Without this I cannot open my browser - the error code comes up every time.

Do a clean (re)install
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
From https://support.mozilla.com/en-US/questions/764376

My ipod touch is not list as a device on itunes. When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.

Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes

Capturing oracle error codes into a variable

Hi
Can someone show me how it is possible to save an Oracle defined error code into a variable? What I am trying to do is when a stored procedure fails an Oracle error is raised, such as ORA-xxxx, then pass this code into variable to be saved into a log.
How do I achieve this?

user633278 wrote:
How do I achieve this?Function SQLCODE in PL/SQL exception handler returns error code. SQLERRM returns message:
SQL> declare
2      x number;
3 begin
4      x := 1/0;
5    exception
6      when others
7        then
8          dbms_output.put_line('Error code: ' || SQLCODE);
9          dbms_output.put_line('Error message: ' || SQLERRM);
10 end;
11 /
Error code: -1476
Error message: ORA-01476: divisor is equal to zero
PL/SQL procedure successfully completed.
SQL> SY.

Error Code:942 While Scheduling a report in BI Publisher

Hi All,
I am trying to schedule one report in BI Publisher.
After Clicking Submit Button while scheduling report,i get following error:
Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 080319)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist Error Code: 942 Call: UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 50 WHERE SEQ_NAME = 'JOB_ID_SEQ' Query: DataModifyQuery()
Kindly Help me in resolving this issue
Regards
Amrita Singh

i know the issue,i can give quick fix, but in-order to make sure you don't get another glitch like this.
I would recommend, you to install the scheduler in another schema or another db.
Re-installing the scheduler schema tables will fix this.

ORA-00600: internal error code, arguments: [ktsircinfo_num1]

While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors.
. . exporting table TEST4
EXP-00003: no storage definition found for segment(29, 371385)
SQL >Drop table test4 cascade;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
sql> Desc test4;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
I dont want to log TAR with oracle right now... I tried dropping and recreating Undo tablespace but still did not help much . Database version is 9204

hi
read metalink ID - 153788.1
CHeers

Transport control program tp ended with error code 0212

Hi all,
I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
                                                                       service: transport service
                                                                       start : online
                                                                       Function: TMS_TP_SHOW_BUFFER
                                                                       message: TP_REPORTED_ERROR
In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
Can you tell me how to resolve this issue?

dev_tp contains:
This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
unicode enabled version
usage: R3trans.exe [<options>] <control_file>
The control_file describes what R3trans has to do.
The following options are possible:
-c f1 f2 : Copy file f1 to f2 with character set conversion.
-d       : DB connect. Test if SAP database is available.
-i file : Import from file without using a control file.
-l file : List the contents of file to the log file.
-m file : List the contents of file to allow tp to create a cofile.
-t       : Test. All database changes are rolled back.
-t4      : Trace level 4. Switch on developer trace.
-u <int> : Unconditional modes. See below.
-v       : Verbose. Write more details to the log file.
-w file : Log file. The default log file is 'trans.log'.
-x       : DB connect without access on any SAP table.
R3trans.exe finished (0012).
& the slog file is not there in the trans/log directory

While activating a request in DSO getting error code 10

While activating a request in DSO getting error code 10
Hi All,
I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
I have checked the formula in Transformation and it works fine. Still I am not able to load data.
Please help.
Thanks and regards
Vishal Pardeshi

Check the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
Otherwise you can check the error from the monitor screen of the request in Details tab.
Veerendra.

Error code 2753

Similar Messages

Maybe you are looking for