Error code 3 on iPad 2

Since the 8.1.1 upgrade ny iPad 2 is not working well. I lost 3G connection for 3 weeks or more. When the 8.1.2 upgrade was pushed i could not do the upgrade directly from the iPad . i had to connect to my Mac through iTunes. Was able to get 3 G for about a week or 2. now i am back to not being able to get 3 G. I tried accepting the 8.1.3 upgrade and got error code 3. it asked me to restore the iPad to factory setting which i did but now the ipad is frozen with the iTunes symbol in the middle of the iPad screen. anyone knows what to do?

Hi GreatGrace1,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are not able to restore the iOS device. I would recommend that you read this article, it may be able to help the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Cheers,
Mario

Similar Messages

Error code - 50 IPad will not snyc -- Help

I have tried syncing my IPAD. It gets to about stage 4 of 5 and reports, the IPAD cannot sync. Error code 50. What does this mean and how do I correct it?
Thanks in advance for any help.

Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform http://support.apple.com/kb/TS1286, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
http://support.apple.com/kb/TS3125.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: http://support.microsoft.com/kb/299357 to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
 Cheers, Tom

Error code 1200 ipad

Cant log in to facebook, the same message each time. Anyone?
"Sorry an unexpected error occured, please try again later.
Error code 1200
(Nesurlerrordomain)"

When searching the Internet I came across this error several times, for instance here:
https://discussions.apple.com/message/7900002#7900002
My guess is that it is an error occurring in the software you are using, probably in the Facebook app, but not necessarily.
Are you using the latest Facebook app?
Are you trying to access Facebook via Wi-Fi or cellular?
Is the firmware in your Wi-Fi router up to date?

WHAT IS ERROR CODE 1671

can you tell me please what is error code 1971

1671
Ipad 3 Getting Error Message 1671
Get help with iOS update and restore errors - Apple Support
more
iphone error 1671

New iPad Air can't connect to iTunes; device "times out"; no error code given

my iMac (8 months old) is running 10.8.5 with latest version of iTunes. When I try to connect my new iPaid Air with a cable, iTunes open, after a few seconds, a windows appears saying "iTunes cannot connect to the device named Peggy's iPad because device timed out". no error code is given. I have restarted my computer and the iPad various times and tried different USB ports on the iMac. I am using the original lightning cable that came with the iPad to connect. I didn't have this problem with my old iPad 2 or with my iPod touch. I do not have any security software installed and no firewalls, etc. Any suggestions on what is causing this problem? Thanks.

You should repost this over in the "using iPad" forum. The iPad gurus hang out there. This is the MacBook Air forum. Here is the link:
https://discussions.apple.com/community/ipad/using_ipad
Regards,
Captfred

TS3694 i keep getting error code 3194 i just want update to5.1.1 on my ipad help

i keep getting error code 3194 i just want update to5.1.1 on my ipad help

Here you go: http://lmgtfy.com/?q=iphone+error+3194

TS3694 I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please

I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please help?

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

My Airport Express will not stream music to my remote speakers through the laptop (windows Vista), gives error code -15000. Works fine from my IPAD and Ipod. Any thoughts, suggestions?

Itunes is throwing a -15000 error code on my Windows vista. Ipad and Ipod work great for streaming to remote speakers, trying to use the computer and it throws the error code.
Any thoughts? I've rebooted the laptop, modem, and AE, even plugged in the laptop recommended by other users, still nothing.

the following is for W7 but might work for you:
Fix for error -15000 Remote speakers on iTunes / Windows 7

Error Code: "This computer is no longer authorized for purchased items that are on this iPad."

I'm getting Error Code: “This computer is no longer authorized for purchased items that are on this iPad.”
I have tried re-authorizing and the error persists.
I have also tried de-authorizing ALL my devices, then re-authorizing and that did not help either.
My husband and I share this iPad and we have set up family sharing.
We have also each purchased apps using our separate iTunes accounts before I set up the family sharing.
How can we fix this error message so that I can back the iPad up to my Mac again?
Husband thinks that at some point we each synced the iPad to our respective Macs.
Could that be it?
Thx!!

I'm not using family sharing, but if you want to sync or backup the iPad with ITunes, I believe that you have to be signed into the same ID on the iPad that you are signed into on the computer and you also have to be authorized for all Apple ID's on that computer that you want to sync or backup with.
DO you have multiple iTunes libraries on the one computer?
http://www.imore.com/how-use-multiple-apple-ids-one-computer-and-itunes

When I try to log on to Facebook, My iPad will not recognize my password, and I get an error code 190. What is it and why do I get it?

When I try to log onto Facebook, my iPad will not recognize my password, and I get an error code 190, but I can log on on my HP desktop. What is code 190, and why do I get it?

I was using the FB app that came with the iPad. What I eventually did was.
1. Held down both home key and on-off button until iPad shut down, then rebooted.
2. Uninstalled FB app.
3. Went to App Store and re-installed FB app.
The iPad had numerous problems. My son saw my plea on FB as I was accessing it through my HP computer, and he walked me through it. While he was at it, he taught me how to disconnect auto-correct. I am not certain that I want to keep that off, but everything is working the way it is supposed to the way it was in the beginning.
I am curious, though, as to what ears to the problem in the first place. After checking various sites, it seems that a code 190 has to do with windows not Apple.
But thank you for the response.

I am using an iPad 2 to view netflix and recieved an error code 144. How do I fix this?

The program just stopped and the screen went blank. I tried it again the next day and the error message said to try again later or select another movie. I tried again and tried selecting something else but got the same error code. 144. Help?

This is an iMac forum, the forum you want is the iPad forum. These are totally different machines and have different operating systems.

HT201210 what is - can not restore ipad due to error code 2006

trying to figure out what error code 2006 is - it is not one listed and I can't restore my ipad to factory settings

It is listed, you just sort have to play around on the support site in order to find it.
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

HT201413 Ipad Air in Recovery mode. Error Code 17

My Ipad Air is currently in Recovery mode after several failed attempts to update the software.
Error code 17 keeps coming up as I try to restore and update. Does any body know what error code 17 refers to?
I am running Windows 7 with the latest version of iTunes, 11.1.4 64 bit.
Any help or advice would be greatly appreciated.
Thanks

Hi there Bluedjlatte,
You may find the troubleshooting steps in the article below helpful.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
-Griff W.

Error code:201 - can't connect to DVR from ipad app, nor fiostvcentral website

Any ideas how to fix a Error Code 201.
When I try to connect to my DVR form the iPAd app, I get that message. The TV seems to be workign fine, and the remote control function in the app works... but it's not gettgin any DVR info beyond the name of the boxes.
Thanks for your help.
€

I've been having the same problem and was just able to solve it on my own using Verizon's in-Home agent. Here's how I did it.
The Problem
When attempting to connect to the Cable Box using the Verizon iPhone or iPad apps, you get the message "Network connction to FIOS services timed out (201)" or something similar. Everything works except for this: Your TV, your Internet, you Wifi network.
The Solution
From your desktop browser, go to http://www.verizon.com/inhomeagent, then download and install the in-Home agent application.
Launch in in-Home Agent App, click on "Quick Fixes", and then click on "Troubleshooting TV Issues"
Click through until you're prompted to select the Set Top Box (STB) you're trying to connect to. Then click "Next."
The agent will "send commands" to your STB. When it's done, turn on your STB (if it's not already on) and your TV. In my case, it said it was downloading and to wait a minute. Then my picture came back. This step may not be necessary to fix the problem, but it's what I did before attempting to use the iPhone/iPad apps.
Try accessing again using your iPhone/iPad app(s). If you're already connected, just use the refresh (circling arrow) button to check it out.
This worked for me. Let us know if it works for you.
Good luck.

It says Login failed. it shows error code: -1 . we have 2 ipads and the other one is log in

My ipad shows Login failed, error code: -1 whereby my husband's ipad is working fine

Well, I wanted to have the audio come from one camera scource and it seemed to be the only way that I could acomplish that by duplicating the cam 2 track. One thing that helped me trouble shoot this was to create a new event and project and optimize all of my media instead of using the proxy, (I don't know why but it worked)
I was able to edit the multicam track with two camera angles and it used the camera 2 angle's audio... as soon as I finished my project and exported the files.. my hard drive crashed. I don't know if it was a buggy software, or a failing drive that caused the blank angles in the original multicam edit. I guess I will have to find out weather or not this new hard drive crashes during my next job.
I appreciate your reply to this post Tom.

Ipad stuck in recovery mode and won't restore--error code 1604

I tried to backup and update my ipad this evening and when doing so it now is stuck on the itunes and USB screen. When I connect the Ipad to the Itunes it says the Ipad is in recivery mode and to restore. I click ok and it tells me i can't restore the ipad and gives me an error code of 1604. I have no idea where to go from here or what happened. Any ideas?

Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
   1. Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
   2. Restore and wait for error 1604.
   3. When prompted, click OK.
   4. Close and reopen iTunes while iPhone remains connected.
   5. iPhone should now be recognized in Recovery Mode again.
   6. Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
http://support.apple.com/kb/TS3694

Error code 3 on iPad 2

Similar Messages

Maybe you are looking for