Error Code 326 in RBT Manager

I currently have a different RBT set to play each day of the week. I just recently bought a new RBT to put in my Thursday slot, but whenever I try to add or even remove any song that's already in the weekday slots I get an error which states "Some of the requested RBT deletion failed code: 326"
What is causing this and how can I fix it?

I have no idea what's causing it. To fix it, I would call customer service, and have them look at your account, since working through the online setup/manage is NOT working.
Good luck.....

Similar Messages

Trying to update Flash CS5 - two errors - Adobe Pixel Bender Toolkit 2.5 Update There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207 Adobe Extension Manager CS5 5.0 Update There was an error downloading this

Trying to update Flash CS5 but get the following error messages.
Adobe Pixel Bender Toolkit 2.5 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207
Adobe Extension Manager CS5 5.0 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207

Hi There,
Please try the below mentioned link.
Error downloading and installing Creative Cloud application
Thanks,
Atul Saini

Error Code U44M1P210 Adobe Application Manager?

After installing the trial for Adobe Premiere Elements 11, I get error messages whenever I run updates on my existing (installed) CS5 software.
The main error code is: Adobe Application Manager - There was an error installing this update. Please quit and try again later. Error Code: U44M1P210. None of the CS5 products were able to be updated including Camera Raw.
Any help/feedback would be awesome.
Thanks!

Hey Maria,
I think finally have a solution to your problem without a peek into your system
It took me a little while to confirm if the following links to the updates could be shared:
win: http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0/7.2.82/Setup.zip
mac: http://swupdl.adobe.com/updates/oobe/aam20/mac/PhotoshopCameraRaw7-7.0/7.2.82/Setup.dmg
Please download & install updates from one of the links above. I hope this resolves your update problem.
Please refer to the below mentioned link for more details around the links:
http://forums.adobe.com/message/4751351
Thanks.
~ Shefali

Error code = 0xEFFFF01 - HP recovery manager

Hello
I have made backup of my files through HP Recovery and Backup manager, due to some problems i had with my HP PC. I have reinstalled the PC, and now i want to recover my backup. But when i run the HP Recovery and backup manager through the restore.exe file in the backup folder, on my USB-device, I get an error which says Error Code = 0xEFFFF01, and I can't get any futher in the recovery process. I have tried to find an answer to the problem, without luck, which made my way to this forum. I Hope you kan give me some answers about why i can't recover my files.
Thank you in advance
Andreas

Hi @Jørge
Welcome to the HP Support Forums! I see that you are having some problems getting your backed up files from your USB. I also did some research into that error code and didn't find anything either. Let me start by getting your product number so I know what we are working with. Have you tried all the USB ports? You mentioned that you “reinstalled the PC” by that do you mean you used recovery media to bring the computer back to defaults or did you install it from an installation CD?
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Error code updating Adobe Application Manager

How do I get Adobe Application Manager to update, it either fails or I get Error code A12E1

Hi pawphoto,
Open Activity Monitor on Mac (It's the the Utilities folder in Applications)/ Task Manager on Windows
Look for "AAM Updates Notifier" in the list of processes (sorting by process name helps)
Highlight it and then click on "Quit Process" or "End Process", say yes to the warning
Quit Actiivty Manger/ Task Manager
Retry the install
Hope this helps.
Please let me know if you face any problem.
Regards,
Sumit Singh

Error code A12E6 in Application Manager

What does the error code A12E6 mean in Adobe Application Manager, came up when loading program.

I found this thread, may be helpful to you...
http://support.muse.adobe.com/thread/1087843?start=0&tstart=0
Looks like they just reinstalled it to get it back.

Satellite Pro L300-23L: error code 12 in device manager after Vista install

Ok,
So I've re-installed Vista (32 w/ SP2) on my Satellite L300-23L after a virus and I'm having a couple of issues:
Issue 1
A Code 12 on Intel Family Chipset 4 - There are two versions of this in the device manager, one is hidden. The one that isn't hidden is the one with the Code 12. I've tried installing latest drivers from both Toshiba and Intel. Problem still persists.
Issue 2
The sleep option on my power off section is greyed out and the hibernate option is missing altogether. Have tried upgrading BIOS but install says that they are up to date.
HELP! - I can find my way around a computer but don't assume I'll just know how to do something, I'd be grateful if you could walk me through any actions.
Thanks in advance. :)

Hi
The error code 12 means:
This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12)
Dont think this has something to do with the missing driver.
Would recommend doing this firstly:
1. Go to Start Menu-All Programs-Accessories, then right-click Command Prompt and select Run As Administrator
2. Enter: bcdedit /set CONFIGACCESSPOLICY DISALLOWMMCONFIG
3. Restart your PC

ReleaseRequest failed with error code 0x80004005 \ Task Sequence Manager could not release active TS request. code 80004005

Hi All,
I am trying to deploy an OS but the deployment is failing part way through. I have searched the logs and identified the error: Task Sequence Manager could not release active TS request. code 80004005
If anyone could assist with this is would be much appreciated.
Many thanks
Logs below:
<![LOG[Unlocked ActualConfig successfully]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="policyutil.cpp:7898">
<![LOG[Unlocked policy transaction lock successfully]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="policyutil.cpp:7904">
<![LOG[Raising event:
instance of CCM_PolicyAgent_SettingsEvaluationComplete
ClientID = "GUID:8388E2E2-7642-4436-88D0-FC9335F6D56E";
DateTime = "20141218122103.273000+000";
PolicyNamespace = "\\\\wst0339\\root\\ccm\\policy\\machine\\actualconfig";
ProcessID = 1748;
ThreadID = 1752;
]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="event.cpp:729">
<![LOG[Successfully submitted event to the Status Agent.]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="event.cpp:747">
<![LOG[End TS policy evaluation]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="policyutil.cpp:10580">
<![LOG[Policy evaluation initiated]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:3387">
<![LOG[Sending success status message]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanager.cpp:659">
<![LOG[MP server http://LONSVR0150.uk.ham.local. Ports 80,443. CRL=false.]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4855">
<![LOG[Setting authenticator]LOG]!><time="12:21:03.288+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4877">
<![LOG[Set authenticator in transport]LOG]!><time="12:21:03.288+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="libsmsmessaging.cpp:7592">
<![LOG[Sending StatusMessage]LOG]!><time="12:21:03.304+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="libsmsmessaging.cpp:4020">
<![LOG[Setting message signatures.]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:1292">
<![LOG[Setting the authenticator.]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:1322">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: LONSVR0150.uk.ham.local:80 CCM_POST /ccm_system/request]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="1"
thread="1752" file="libsmsmessaging.cpp:8422">
<![LOG[Request was succesful.]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:8758">
<![LOG[Finalize logging request ignored from process 1748]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tslogging.cpp:1737">
<![LOG[Waiting for CcmExec service to be fully operational]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4019">
<![LOG[CcmExec service is up and fully operational]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4024">
<![LOG[Access handle will be read from _SMSTSActiveRequestHandle]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:99">
<![LOG[Access handle: {9F9B91DA-055D-4B32-9817-52C369835080}]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:111">
<![LOG[Attempting to release request using {9F9B91DA-055D-4B32-9817-52C369835080}]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752"
file="tsmanagerutils.cpp:118">
<![LOG[CoCreateInstance succeeded]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:133">
<![LOG[pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136)]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager"
context="" type="0" thread="1752" file="tsmanagerutils.cpp:136">
<![LOG[ReleaseRequest failed with error code 0x80004005]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="3" thread="1752" file="tsmanagerutils.cpp:136">
<![LOG[Task Sequence Manager could not release active TS request. code 80004005]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="2" thread="1752"
file="tsmanagerutils.cpp:165">
<![LOG[Process completed with exit code 0]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="TSMBootstrap" context="" type="1" thread="1728" file="commandline.cpp:1098">
<![LOG[Exiting with return code 0x00000000]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="TSMBootstrap" context="" type="1" thread="1728" file="tsmbootstrap.cpp:1032">
<![LOG[Process completed with exit code 0]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="commandline.cpp:1098">
<![LOG[Task sequence completed 0x00000000]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1384">
<![LOG[Uninstalling Setup Hook]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1427">
<![LOG[Removing setup hook from registry.]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="0" thread="788" file="vistasetuphook.cpp:143">
<![LOG[Successfully removed C:\WINDOWS\system32\OSDGINA.DLL]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1183">
<![LOG[Successfully removed C:\WINDOWS\system32\OSDSETUPHOOK.EXE]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1183">
<![LOG[Successfully removed C:\WINDOWS\system32\_SMSOSDSetup]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1220">

4005 can mean a few things, Some common can be The wrong BIOS time, or a a bad Hard drive. look at those two first.

Satellite L300D - Error code 19 in device manager on CD/DVD drive

I have a Satellite L300D model PSLC0E and have just installed Windows 7 upgrade from Vista, all is running well apart from HL-DT-ST DVDRAM GSA-T50N ATA DEVICE and ATI. With the HL-DT-ST DVDRAM GSA-T50N ATA DEVICE there is a driver problem it says <Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)>it seems to do with NTI Backup 4, have tried updating to NTI Backup Now 4.5 but still no luck.
With ATI I have run updates and reinstalled the program, checking the system it shows that it is installed and the every thing is running but I do not seem to be able to change the display settings the largest is 1200 x 800, I seem to think that with ATI there should be more but not sure because when I start to run a game the screen size changes to 1024 x 768 and i cannot change anything. Any body got any Ideas?
Grommitt60

Hi
1)Have you also tried to remove the upper- and lowerfilters in registry? I have noticed in forum that this does solve this error code. On the Microsoft Knowledge Base you can find a workaround for this:
http://support.microsoft.com/kb/314060
2)I have also Satellite L300D and the maximum screen resolution is 1200x800. So you can set a higher screen resolution on internal monitor, this is only possible on external monitor.
And normally you can change the screen resolution in every game. Check this!!!

SD-R6112 drive no longer recognized - Error Code 19 in device manager

Hello!
I have two opticals (one internal, one external) that suddenly are unrecognized. Both are showing up in device manager with the same error message as follows:
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
After uninstalling and re- installing both several times, including rebooting the devices still will not change status.
The devises are: TOSHIBA DVD-ROM SD-R6112 (internal)
TSST corp CD/DVDW SH-S182M USB Device (external)
Both devices were working just fine the last time I was on my laptop, 2 days ago.
I assume I need to delete some registry entries, but without specifics, I'm not going there!
Can anyone help me?
Thanks so much
Photographer with customers waiting for images...
Susan DeFurianni

In my knowledge a registry problem was detected. This can occur when more than one service is defined for a device, if there is a failure opening the service registry entry, or if the driver name cannot be obtained from the service registry entry.
As far as I know Microsoft provides these solution options:
Click Uninstall, and then click Scan for hardware changes to load a usable driver.
Restart the computer in Safe Mode, and then select Last Known Good Configuration. This rolls back to the most recent successful registry configuration.
Furthermore you could try to remove the Upperfilters and LowersFilters from this registry entry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4 D36E965-E325-11CE-BFC1-08002BE10318}
If it doesnt help then access the device manager reinstalls the primary and secondary channel from the IDE ATA/ATAPI Controller section and reboot.
Good luck and Bye

Equium A200-26D - Error code 19 in device manager on USB ports

I have decided to try Windows 7 but the usb ports don't work in device manager all the usb root hubs have a yellow triangle and the device status says "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)".
I've tried uninstalling them through device manager and restarting the computer and downloading and reinstalling the vista drivers, as I can't seem to find Windows 7 drivers, but none of that fixed anything. I was wondering if there was anything else I could try or if I could get a link to the right drivers.

Firstly I'll state I know first hand that sarcasm and being generally rude via a forum will not get issue's resolved any faster , but I feel raped by Toshiba and 3rd parties and obliged to post
Lets start at the beginning , that's usually the best place .
On 2008 I bought a Toshiba , being a 3D artist I thought this would be a great investment .
But sadly I was wrong .
Purchased at PC WORLD GLASGOW - for 450 GBP "just for geographical reference "
Once I had opened the shinny new box and carefully unwrapped the dangerous contents , I switched on my laptop with bated breath........................
Guess what ?
3 dead pixels not at the side nor the top but right in the middle .
Now you can understand my concerns being a graphics artist , but this issue was quickly resolved "After a Huge fight with PC world because there generative manager policy for today was
" You cant return Unless it had 5 or more dead pixels "
" WRONG ANSWER MY FRIEND "
Ok ,so excellent they swapped it ,after I had to fork out another 50 GBP for an upgraded version because they had none in stock ! .
So effectively I got another machine that I didn't want for extra money .....superb
Ok so, I get this machine home , TOSHIBA EQUIUM A210
everythings fine and dandy for about 1 week
A) DVD DRIVE
-At first I notice the DVD drive acting funny , reading discs then not reading them it lost all function except the ability to read ,ok not a problem I have a home PC that can burn discs ,I'll let that one slip .
B) PAINT FLAKING OFF
the paint on front panel "where the lights are " starts to flake and fall off .
-Ok I'll put that down to wear and tear but its still only a month old
C) OVER HEATING (MEGA) Burnt my daughters arm .
- As I mentioned above I do graphics , this machine main purpose was to browse the internet ,maybe a few world docs , not render out 9 million polyz , I fully understand this concept .
but it started to overheat , I'm not talking about a little bit warm , I'm talking full on ,that much you could cook an egg on . not only did the machine but also the power pack . remembering this machine is still less than 2 months old .
The heat was that intense that it burnt a perfect rectangle onto my 3 year old daughters arm .
-arguing with my wife not to sue for faulty/dangerous electrical goods I phoned customer services up , and spoke to a very nice gentlemen that was happy to help .
Excellent Laptop getting picked up and taken away to get fixed ----SEE CUSTOMER SERVICES NOTES .
I was that considerate that I re-formatted the machine ,dragged all the essential tools onto the desktop ,you know control panel , system setting ect . and even made a nice jpeg schematic where the faults are "because I know how much off a pain in the teeth it can be working on the tech side and anything I can do to help "
1 or 2 weeks later I get my newly refurbished laptop back .
Superb , or so I thought ...................
Jump forward 6 months later , just before the manufactures warranty runs out IRONICALLY
Inbetween random faults and the paint starting to fall of AGAIN ,
The machine starts to switch its self randomly off ! without prior warning .
"Ok , maybe it was just a system fault , I'll restore .
Nope still doing it , Maybe its the battery not holding charge and it's struggling to detect it ?????
Nope its still cutting out ................
May I also add after the return off the machine ,which in my professional opp " YOU JUST REPLACED THE SHELL AND BLEW THE DUST OFF " . --------- PLEASE POST CUSTOMER SERVICES NOTES ...."maybe I'm wrong ?"
Now due to the machine randomly switching it's self off it caused massive corrupt sectors and chkdisk errors and loss of data ."some of which was costly , but functionally I'm an intelligent spices I managed to back MOST data up .
Ok so not a problem It's getting old (1year and 3weeks to be exact ) , its generally used for Internet ,theres some work and some personal photos ,nothing thats going to rock your world .
I'll use it for that .
OVERHEATING AGAIN :
Now this can be caused by dust ,also quoted by one of your ignorant members of staff .--
!!!!but this was caused by another mass produced product ,quickly shipped out and grossly missing product user safety testing .....................
HOW DO I KNOW THIS ::::::::::::::::::::::;
Mainly because when you Google Toshiba A210 it hits over 3 million user faults / problems
"Excuse me for sounding like one of your tech guys , but I used google search string to legitimize the search "
and the evidence is there .
Ok so its overheating ,thats maybe why it keeps cutting out ?
not a problem ,not UNTILL TODAY .
"sorry it took so long to get here "
So today My daughter "now 4 " is playing on nickjnr home page "Carefully avoiding the hot lava that pours from the heat vent at the side , and it cuts out again ....
Goto Switch back on
" A method we now call " PULL THE PLUG OUT AND SWITCH ON AND OFF 5 TIMES ,STAND ON 1 LEG & PRAY .............
and up pops this
some here may have seen this before ...................
THIS IS CAUSED by poor programming and bad development
BIOS :
Its called BIOS lock "and yes i did try , TOSHIBA , ADMIN , 12345678 blah blah blah " effectivily the machines decides to encrypt or maybe not encrypt a password , just depends how it feels that day .
Toshiba know about this fault and offer a fix ##maybe at a price ,just depends on what sales rep you get ##
This is the whole point of the conversation so If I lost you with bad grammer / spelling at any point in the post please PAY ATTENTION this is the IMPORTANT PART
================================================== ==========================
I searched ways to brute force , fix , remove battery and so on when I decided enough was enough this machine is faulty -------I'm going to give legal jargon here just so you know where on the same page .
The Sale of Goods Act 1979 as amended
Goods must be:
???????????????¢?????¢??? ??????¢???¬?????¢???????? ???¢fit for the purpose they are made for
???????????????¢?????¢??? ??????¢???¬?????¢???????? ???¢safe
???????????????¢?????¢??? ??????¢???¬?????¢???????? ???¢durable - last for a reasonable time
???????????????¢?????¢??? ??????¢???¬?????¢???????? ???¢have no minor defects
???????????????¢?????¢??? ??????¢???¬?????¢???????? ???¢acceptable in look and finish
There's others if you would like me to continue ,even better ones but I'll just use this one right now , just to be polite .
Your PRODUCT was faulty since it left the covaor belt , your people should have picked up on this when it got returned but I'm sure they may have been busy ! .
Now we can argue these points and justifications but ontop all that .................
this hurts the most .
Today I phoned - TOSHIBA CUSTOMER SERVICES :
"Sorry Mr Scott for the problem you can either wait and we'll send someone out to fix it , OR I QUOTE you can take it to PC WORLD and because there TECHGUYS they will be obliged to fix FOR FREE due to it being purchased there .
I PHONE SEVERAL PCWORLD NUMBERS UP and bounced there calls try to get an answer before someone on the end says # " Maybe you should take into your local store 15 miles away " ----
great thinking sherlock
OK
I GOTO PC WORLD : Yet another human with the capacity of a moth , 300 million sp3rm and that's the one that got threw .
TELLS ME " We don't do that because we are are not obliged to fix it " ,"But i have a piece of paper with a customer reference that a trusted toshiba services man gave me
Ok hold my breath walk out and go and phone TOSHIBA up again not a problem ................
This is where it gets good , I phone you after speaking to another 4 or 5 people on your side .
When I get to speak to someone that's happy to help but at a price ,who decides to become law and Order roled into one, the conversation gets silly and YOU throw potential threats and jargon around #congrates your grease monkey can read off a pdf document ,well so can mine ,but fortunate she has practiced Law for the last 10 years and is pretty accurate ...
but again I said Polite so here it is :
YOUR QUOTE TO FIX YOUR PRODUCT ::: 100 + GBP give or take just depends on how constructive your people decide to be that day ...
So here is my QUOTE
PHONE CALLS
TOSHIBA 8 : average length 20 minutes 8 GBP
PC WORLD 4 @ 1.50 min 15 GBP
GAS / FUEL : 15 GBP
Loss of Earnings : 90 GBP @ 5 DAYS 410 GBP
Damages " DO YOU GET MY POINT YET ? "
As I mentioned I'm a reserved man ,but getting shafted by TOSHIBA from all angles does has Limits
Now what I would like to see arriving on my front door is a new brand spanking Laptop with " WE ARE SORRY " note attached .
but for some reason I don't get that impression ?????
I'm hoping we can remedy this issue in a sensible fashion ,
If we can't , I do have a great idea of posting a YOUTUBE video of me destroying your product with several sharp objects , counter productive maybe ,but when it hits a million hits I'm sure I will get another company to give me a laptop out the kindness of there heart ................
Now for forum posters I apologize for raining on your day , to TOSHIBA please try to understand why I'm a little bit upset .
Have a nice day
PEACE .
onlinerender
PM ME .......................................

Error Code 0x8004fceb - Intellisync/Desktop Manager 4.3

I keep getting this error message using Vista O/S, yet works fine on XP O/S. Does anyone have a solution for this?

I found this on crackberry - it seemed to work then blew up again....with another error...intellisync error 0x80040fb3....yikes
The link i found is h t t p://forums.crackberry.com/f79/my-calendar-won-t-sync-23514/
I only use outlook to sync contacts and my calendar and i just sync once or twice a week and its working fine. But once i get an error i have to delete the calendar file in blackberry desktop manager.
My dad does the following for his blackberry
If you getting an error message on calendar sync delete the "intellisync"
folder and then resync. The folder will be rebuilt.
The folder on my computer is under Users/"me"/AppData/Roaming/Research in
Motion/Blackberry/
I hope this helps! I've read some posts from RIM reps that say this is basically a known problem and when they release the new OS for Pearls it will be fixed and you won't need these work arounds anymore.

Error Code -OVM-1000 OVM Manager could not connect to {0}, please check

Hi
When i tried to import the template through OVM Manager it throws the follownig error.(It was working fine before)
OVM Manager could not connect to {0}, please check the IP and Oracle VM agent password.
I did the following trouble shooting
1.Reset the OVS agent password but didnt work.
2.I am able to import ISO files and created the shared disks.
3.Checked the connectivity between OVM Manager to OVS server and checked /etc/hosts file,firewall settings ( disabled state in both) & timings also.
But i couldnt pinpoint the exact issue. Can anybody help me out on this?

Fixed it. Shutdown all the VMs and rebooted the base server. Configured the ovs-agent ( ovs-agent configure) again and restarted the ovs-agent.(ovs-agent restart). Now i am able to import the templates.
Also OVM Manager shows all the VMs in shutdown status after reboot the base server and i fixed it used "Reset" button in OVM Manager.
1) Click on the Virtual Machines tab found on the top left corner.
2) Select the radio button of the appropriate virtual machine that has the incorrect status displayed.
3) Click on the ‘More Actions:’ drop down box and select the option ‘Reset’
4) Click the ‘Go’ button for the reset to take place.
Once the ‘Go’ button is selected, the virtual machine will reset and display the appropriate virtual machine status.

Adobe Illustrator CS5 15.0.2 Update There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207 Adobe Extension Manager CS5 5.0 Update There was an error downloading this update. Please quit and try again later. Err

It is ******** that you can't get someone to help you and I have to post on this stupid forum thing. Help me! That is all I ask.

Use this link and download manually.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4905
This link is for Mac. If you need PC click "Illustrator" at the top and find the right download.
I had to do this because I was getting the same error message you're getting.

Error Code: U44M1I216 updating CS6 Creative Cloud

I am getting the following errors when updating via the update manager. I'm running OSX 10.6.8
Adobe Extension Manager CS6 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Adobe Media Encoder CS6 6.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Adobe CSXS InfrastructureCS6
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Any help on how to resolve these errors much appreciated

Hi,
Did exactly what was recommended and this was the result. Now there's a new error code for Premiere Pro.
Adobe After Effects CS6 11.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Adobe Extension Manager CS6 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Adobe Premiere Pro CS6 6.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I208
Adobe CSXS InfrastructureCS6
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216

Error Code 326 in RBT Manager

Similar Messages

Maybe you are looking for