Error Code -36 Connect to Microsoft Windows StorageServer 2003

Hope someone can help me
Each time i connect to our office server cifs://192.XXX.X.XX logging into the server as the administrator i can open our office documents and see the files.. but i cant move any files over to it comes up with error -36
The office server is completely open with its permissions and i could access it with no problems using Tiger, but as soon as i use leopard im getting this error??
Any help would be most appreciated.

I was getting the same "-36" error while trying to backup to a Lacie firewire external drive.
I had a lot of people telling me to re-format, erase, reinstall, run utility programs ... yada, yada, yada.
First off, test to see if it is the connection type (firewire). I reconnected the offending external drive via USB, restarted the drive and ... BINGO! ... all transfers went perfectly.
Once i knew it was the firewire connection and not the drive itself i simply unplugged my iSight camera (the only other firewire device connected to my machine), reconnected my external drive via firewire and the problem is now corrected.
Firewire buses seem to be very finicky things ... i would suggest eliminating all firewire devices from the machine (except, of course, the external drive you're trying to transfer to) and see if the problem goes away.
Like i said, i simply unplugged my iSight camera and the transfer to my external drive went perfect and my transfer rates went from an average of 4MB/sec to over 19MB/sec.
P.S. BTW - prior to the error and after i corrected the error by unplugging the iSight camera, my internal and external drives all checked out 100% on Disk Utility, Disk Warrior and TechTool Pro.

Similar Messages

EVENT 36888, Schannel A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows SChannel error state is 252.

I keep losing my network connection for a few seconds at a time. Not a big deal unless I just spent time filling in a form and have to redo it.
Getting:
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows SChannel error state is 252. Using windows 8. I just installed the new ARRIS
TG862 provided by Comcast.
Any Ideas?
Also get the following errors in my events:
The name "WORKGROUP :1d" could not be registered on the interface with IP address 10.0.0.2. The computer with the IP address 10.0.0.3 did not allow the name to be claimed by this computer.
Realtek PCIe GBE Family Controller is disconnected from network.
Any help is appreciated

Hi,
Critical Kernel-power event ID 41 is used appear after PC restarts or randomly restarts with error
BugcheckCode listed or a cold reboot. Do you get BSOD and some dump files?
Default location is %SystemRoot%\Minidump. You can upload it to skydrive, then paste link here.
How to use Skydrive
http://www.wikihow.com/Use-SkyDrive
Kernel-PnP event ID 219: A Plug and Play device driver on your system is failing to load due to a device driver or device malfunction, you can unplug any external devices (except mouse and keyboard, but please keep the latest drivers), and
check device status in device manager, please also keep the all latest driver update of your PC.
And for error 36888, I found a similar thread, please refer to this link
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4c5430f5-43f6-41b4-97d3-03cfb3efa70b/schannel-error-event-id-36888-is-there-a-way-to-identify-what-causes-schannel-to-log-error?forum=winserverDS
Regards
Yolanda
TechNet Community Support

When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

FRANK M
What computer operating system is your Premiere Elements 9 running on? I will assume Windows 7, 8, or 8.1 64 bit for now.
As for the Help Menu/Update way for updating, are you doing that with antivirus and firewall(s) disabled? If not, please do so.
Do you have the 9.0.1 Update of the program installed? What version of Camera Raw do you have installed?
Premiere Elements 9 is an older program where you can still do manual installs for that one and only Update. And, Camera Raw for 9 is no longer being updated.
For the 9.0.1 Update
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4929
Camera Raw (last update possible for 9) is 6.5
Camera Raw-compatible Adobe applications
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.5 update
Please review and consider the above, and then let us know the outcome.
Thank you.
ATR

Error -42032 while connecting iPad2 to Windows PC / iTunes 10.5.0.142 to update iOS 5

Error -42032 while connecting iPad2 to Windows PC / iTunes 10.5.0.142 to update iOS 5. After downloading iOS 5 I'll get error -3259 and the updateprocess of my iPad2 don't starts.

I guess I should also note that sometimes it just crashes... just because.
So, get to fixin'.
No, seriously, fix it.

Every time I try to download itunes to my computer I receive an "error code 2721". I checked windows and they think it's itunes. How do I fix this?

I have windows 7 and have tried uninstalling and reinstaling itunes, trying to fix errors with my "Bonjur" service for itunes, and checked with windows to see if the error code 2721 came from a windows error but they say it's an issue with itunes. I'm not sure what else to try.

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Installation error : Can't connect to X11 window server using ':0.0

Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
WHILE INSTALLING ORACLE10g ON FC1 GETING THIS ERROR
Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
:0.0
:0.0
Unable to start an interactive install session because of the following error:Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
HOW SHOULD I MAKE THE REQUIRED CHANGES

Check this thread:
Re: Can't connect to X11 window server using 'localhost:0.0'

Error when configuring Siebel Server in Windows server 2003

Hi
I am getting below error when configuring Siebel server in Windows server 2003 VM. All the ODBC connections and SADMIN user id & password and gateway host name and port everything correct. Able to ping and telnet to gateway port 2320. Please help on how to overcome this situation....
2021 2012-03-08 01:13:22 0000-00-00 00:00:00 -0500 00000000 001 003f 0001 09 sw_cfg_util 3940 3332 C:\sba81\siebsrvr\log\sw_cfg_util.log 8.1.1 SIA [21111] ENU
GenericLog     GenericError     1     000000024f580f64:0     2012-03-08 01:13:22     Error in transferring input values ,num of arrays incorrect 0, expected : 1
GenericLog     GenericError     1     000000024f580f64:0     2012-03-08 01:13:22     TransferInputsToValues returned error:3611539 to SetControlValues
GenericLog     GenericError     1     000000024f58096c:0     2012-03-08 01:13:33     NSS - ErrCode 4597527 SysErr 0
GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     NSS - ErrCode 4597527 SysErr 0
GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     Validation failed : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸     ֓呸     ֓㷕粃Ꞡ粈㶻粃
GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     ValidateFailed for Gateway Name Server TCP/IP Port, error : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸     ֓呸     ֓㷕粃Ꞡ粈㶻粃

Please check Doc ID 1391312.1 on support.oracle.com, this article has a list of possible causes and resolutions for the error messages you are receiving.
Hope it helps,
Wilson

Problem of isFile on Microsoft Windows Server 2003

Dear all,
Thanx all for your support in case of previous questions...
Right now we are facing issue with isFile method of java.io.File class.....
On windows xp and unix machine it is returning true for files....but on one machine at client side it is returning false...
Please find os and jre details of same machine..
OS - Microsoft Windows Server 2003 ( Enterprise Edition - Service Pack 2 )
Java Version - JRE6 ( SUN MICROSYSTEMS, INC)
Main issue is same is working on other machines....
using filefilter....
it is returning false on .......if(tempFile.isFile())...statement......PLZ help me...is there any OS related dependency....
package com.hth.filter;
import static com.hth.vars.IbankVars.*;
import java.io.File;
import java.io.FilenameFilter;
import java.util.regex.Matcher;
import java.util.regex.Pattern;
public class FilesFilter implements FilenameFilter {
     private static Pattern p = Pattern.compile(FILES_PATTERN_TO_BE_EXCLUDED);
     private File tempFile=null;
     private static String fileSeparator=null;
     private static String excludeExtensionList="";
     private int corporateId =-1;
     public FilesFilter(int corporateId){
          this.corporateId=corporateId;
     static{
          try{
               fileSeparator=System.getProperty("file.separator");
          }catch(Exception e){
               fileSeparator="\\";
               e.printStackTrace(System.out);
     public boolean accept(File folder, String fileName) {
          // TODO Auto-generated method stub
          Matcher m = p.matcher(fileName);
     if(m.find()){
          return false;
     }else{
          tempFile=new File(folder,fileName);
               if(tempFile.isFile())
                    System.out.println("FilesFilter-fileName:"+fileName+"IS FILE");
                    //if(fileName !=null && fileName.indexOf(UNDERSCORE)!=-1){
                         /*     if(fileName.substring(0,fileName.indexOf(UNDERSCORE)).equalsIgnoreCase(String.valueOf(corporateId)))
                              if(fileName.lastIndexOf(DOT)!=-1)
                                   StringBuffer strFileExt =new StringBuffer(COMMA);
                                   strFileExt.append(fileName.substring(fileName.substring(0,fileName.lastIndexOf(DOT)).length()+1,fileName.length()));
                                   strFileExt.append(COMMA);
                                   if(excludeExtensionList.toLowerCase().indexOf(strFileExt.toString().toLowerCase()) != -1){
                                        //file extenstion is configured in property file for exclusion.Hence return false;
                                        return false;
                                   }else{
                                        //file extenstion is not configured in property file for exclusion.Hence return true;
                                        return true;
                              }else{
                                   return false;
                         /*}else
                              return false;
                    }else{
                         return false;
               }else{
                    System.out.println("FilesFilter-fileName:"+fileName+"IS FOLDER");
                    return false;
     public static void setExcludeExtensionList(String excludeExtensionList) {
          if(excludeExtensionList!=null)
               FilesFilter.excludeExtensionList = COMMA+excludeExtensionList+COMMA;
}

Right now we are facing issue with isFile method of java.io.File class.....
On windows xp and unix machine it is returning true for files....but on one machine at client side it is returning false...So it's a directory not a file.
Next time please use the CODE button above to format your code.

Which oracle software is suitable for Microsoft windows server 2003

Hi,
I'm suppose to install oracle 9i,10g on the system which i mentioned below.
Which oracle software is suitable for the system?
System:
Microsoft Windows Server 2003 R2
Standard x64 Edition
Service Pack 2
Computer:
Intel(R) Xenon CPU
E5335 @ 2.00Ghz
2.00Ghz, 2.00Gb of RAM
Waiting for your suggestion.
Thanks, Muhammed.

Thanks for your quick response.
As you said v11 can be installed and
Could you please say about the bit (32 or 64bit)? which oracle binaries i can download
because my system configuration is server 2003 - 64 is bit xeon process.
Many Thanks,
Muhammed

FMS on Microsoft Windows Server 2003, Enterprise Edition (64-bit)

Hi,
I am gotta buy Microsoft Windows Server 2003, Enterprise
Edition (64-bit) for my deployment of FMS 2.
As I read FMS 2 system requirement, it only support Microsoft
Windows Server 2003, Enterprise Edition (not mention 32 / 64-bit).
Does anyone got idea on this issue?
Thx a lot!
Alan

At this time, FMS is only officially supported on the 32 bit
version of Windows Server 2003.

Microsoft Windows Server 2003. Move from SP1 to Windows Service Pack 2?

Hello,
Our hosting system is:
Microsoft Windows Server 2003 R2 Server 5.2 Service Pack 1 (32-bit)
or
Microsoft Windows Server 2003 Server 5.2 Service Pack 1 (32-bit)
on which we have a Oracle Database 10g 10.2.0.3.0
running.
Now our IT is demanding the Windows Service Pack 2 to be installed on the server.
Are there known issues or can this be done (about 30 patches) without any considerations?
Thanks,
Marco

Oracle's general policy is:
Oracle certifies against the specific Microsoft operating system (OS) and, if applicable, service packs (SPs) stated in the Oracle product documentation. Oracle will support the use of our products on any later SP or OS security patch as soon as that SP or patch becomes generally available. Depending upon the severity, quantity, and impact of the SP or patch-related issues found, Oracle may recommend that customers wait until relevant Oracle patches have been released before upgrading to a particular SP or OS patch. Oracle may recommend or discourage the installation of specific SPs or patches if it will significantly affect the operation of Oracle software, either positively or negatively. If such a statement is deemed necessary, then Oracle Development will disseminate this statement in as timely a fashion as possible after the release of the SP or patch.
There are no known issues with ServicePack 2.
Werner

Does LV 7.0 PDA module support Microsoft Windows Mobile 2003 software for PocketPC?

I am evaluating the possible use of PDA
that runs Microsoft Windows Mobile 2003 software
for PocketPC and would like to know if the
LabVIEW 7.0 PDA module supports this software.
I am planning to scan barcodes with this PDA
and transmit this data over a WLAN to database.
Thanks!

Depending on the Pocket PC PDA type it is practical to add a barcode reader attachment and then use this as keyboard input into the PDA. You can look at a Grabba barcode Reader attachment (www.grabba.com)
I work for Grabba in R&D and we are looking at demand in this area (which is why I was looking at the forum to try and determine whether a need exists).
If we can help you let us know. I would be interested in knowing where you think this will help you. We have our own ideas but input from the field is most welcome.
cheers

Xserve Raid connected to a Windows Server 2003

We have xserve raid connected to a Windows 2003 Server. We just recently purchased a new Windows 2003 server to replace the existing server. How do we move the Xserve Raid from the existing server to the new server without losing the Windows shares?
Windows XP Pro
Windows XP Pro
Other OS Windows Server 2003

Hey GCA! Could you possibly take a look at my discusion entry? Topic: NTFS/RAID Config Dilemma, Link: http://discussions.apple.com/thread.jspa?threadID=757306
If you don't mind, I'd like to compare notes with you on how your managing your Xserve RAID connected to a Windows Server 2003. Thanks.

SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

Hi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan

Error code 0x80070570 during install of Windows 7 64-bit

Hi
I have a Macbook Pro 2008 - 2.53 Ghz Intel Core 2 Duo. It has 8Gb of RAM. I have run Windows 7 on this machine before successfully so I do not know what has changed except for the RAM.
The steps I took are below.
- start bootcamp
- repartition hard drive (successful) - 70GB
- insert Windows 7 64 bit disc (original - bought at launch) when instructed and select restart via Bootcamp
- boots into Windows 7 installer successfully
- I select Advanced installation
- I format the Bootcamp partition
- then installation starts. It reaches Expanding Windows File stage. At 42% an error occurs (below).
"Windows cannot install required files. The file maybe corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x080070570"
This can be reproduced every single time and at the same exact stage and percentage. I have tried different partition sizes with no success. I am using the original discs from Microsoft and also tried a copy of the disc with the same exact results. My Macbook Pro could install 8GB of RAM due to a secret firmware upgrade from Apple and it was discovered by some fix it site and they announced it which resulted in Kingston selling an upgrade kit which I purchased and installed. It works like a charm with OSX. Everything runs very smoothly and there are no errors at all on OSX. I can even run Final Cut Pro X and it uses all my RAM with no errors or crashes, so I am at a loss.
I hope someone out there has had similar issues and found a way to resolve it. Thank you.
Adam

I just successfully installed Windows 8.1 Update 1 on BootCamp on Mac OS X Yosemite. Here is a step by step I just wrote, hope it helps y'all:
How to successfully install Windows 8, or above, on Mac OS X Mavericks or above:
Requirements:
1- Windows OS ISO Image file
2- An 8GBs USB Flash Drive
3- A good Internet connection as you will need to download the Windows compatible drivers for your Mac
Steps:
1- Open up Disk Utility and create an additional partition for Windows formatted as ExFat. 100GBs, or above, is recommended as update to the operating system, as well as Apps requiere space on your HD or SSD [This step can be done during Mac OS X's installation process]
2- Open up BootCamp Assistant
3- Make sure only the 'Create a Windows 7 or later version install disk' is checked and your USB Flash Drive plugged in and click 'Continue'
4- Click 'Choose' and select your Windows ISO Image file
5- Select the USB Flash Drive you will be using during the installation process and click continue to confirm
6- Once done, restart your Mac and hold down the 'alt/option' key on your keyboard to bring up the Boot Menu
7- Select the USB Flash Drive named Windows, not the UEFI Boot
8- Install Windows as you normally would
* Remember to press and hold the 'alt/option' key, and select the Windows Partition, whenever the installation process requires your Mac to restart
* http://msdn.microsoft.com/en-us/library/windows/apps/jj945423.aspx
* http://windows.microsoft.com/en-us/windows-8/install-windows-on-mac

Error Code -36 Connect to Microsoft Windows StorageServer 2003

Similar Messages

Maybe you are looking for