"error code-39 with core audio driver"

so I have a 75 minute continuous dj mix I recorded onto garageband... after having recorded this I then converted the file from a 120bpm to a 60bpm speed so as to fit it all in... now, however, towards the end (between 65-70 minutes into it) the mix suddenly is interuppted by a crude digital-type sound. a pop up then says "error code-39 with or in core audio driver"....
what gives here?
I'd appreciate any help you can give.
peace.

does this mean I have to re-record the audio file?
Probably. I guess you could try a commercial disc repair program like TechTool Pro or Disk Warrior, but odds are if the file system can't figure out where the end of file is, the file is hosed --Hang B-(>

Similar Messages

  • Error Code -1 Returned by core audio driver-Please help!

    I can't open GB3, each time I try, it gives this message error: Error Code -1 Returned by core audio driver
    What can I do?
    Intel 2.16, OS: Leopard, and I use Guitar Rig 2 which work fine.

    There is no such thing as a G5 Intel.
    Error -36 is an "I/O error", could mean a lot of things, you should give more details:
    • Does this happen during recording or playback?
    • Does it happen again if you re-open the project/re-start GB?
    • Does it happen with other projects too?

  • "error code -1 was returned by the core audio driver" battery multi?

    working on a track with NI's battery 3 loaded as a multi, eveyrthings fine. next day come to open the project and i get the following message:
    "error code -1 was returned by the core audio driver"
    everything is fine with the project except that in the channel where battery is loaded, the plugin name (where you insert the plugins) has a line strike through it, and the GUI wont open when you double click it?
    i tried re-loading the plugin as a multi instrument but get the same error message, but it loads fine as just a stereo or mono plugin.
    any ideas??
    thanks in advance.

    I just did a search using "search discussions" using the term:
    "-50"
    (use the quotes, because they're important when doing this kind of search)
    It returned a lot of hits, and apparently you're not alone in wondering what this error means. Lots of people reporting it as an error in iTunes, and also something related to 10.4.9. But in the event no one here answers your question, I suggest you do the search yourself, slog through the results, and see if anyone's come up with an explanation that fits your scenario.

  • Error Code -36 Returned by core audio driver-Please help!!!!

    8:03 into my new song and all of a sudden I get a pop up that says "error code -36 was returned by the core audio driver" I click it off and the track continues to play looping 3 seconds of the same thing over and over again as the track continues over what should be correctly playing.
    This is in garageband 08' on an up to date G5 intel with plenty of space and NO locked tracks. I also ran disk utility and nothing has helped.
    Any idea what is happening and how to save my song?
    Thanks for any help!
    Message was edited by: Howard Herrick

    There is no such thing as a G5 Intel.
    Error -36 is an "I/O error", could mean a lot of things, you should give more details:
    • Does this happen during recording or playback?
    • Does it happen again if you re-open the project/re-start GB?
    • Does it happen with other projects too?

  • Error code -36 was returned by the Core Audio driver.

    Hi; am receiving this error...
    Error code -36 was returned by the Core Audio driver.
    ...but am not finding any info about it or how to fix/update the driver. Anyone have this error before?
    thanks, Charlie

    There is no such thing as a G5 Intel.
    Error -36 is an "I/O error", could mean a lot of things, you should give more details:
    • Does this happen during recording or playback?
    • Does it happen again if you re-open the project/re-start GB?
    • Does it happen with other projects too?

  • Error code 25974 was returned by the core audio driver?

    hello, well ive been having a problem trying to record one of my dj sets directly from my mixer.
    This is my set up: My dj equipment is conected via my mixer to an m-audio ozone midi keyboard (1 stereo in 1/4 TRS jack), this keyboard is connected via usb to my computer (imac g4), and im using logic express 7.0.1 as my recording software.
    When i start recording, everything is working ok, i can see the signal on my
    m-audio keyboard, and i can see the signal on logic, on one of the audio tracks.
    But then, logic gives me an error message:
    "error code 25974 was returned by the core audio driver."
    and then the signal goes out, and i cant finish my recording session. The portion of the recorded set until the error, is perfect, but i need to be able to record the whole session.
    i hope i made my self clear. any help!!! thanks a lot
    Imac G4   Mac OS X (10.4.4)   1 g ram

    I just did a search using "search discussions" using the term:
    "-50"
    (use the quotes, because they're important when doing this kind of search)
    It returned a lot of hits, and apparently you're not alone in wondering what this error means. Lots of people reporting it as an error in iTunes, and also something related to 10.4.9. But in the event no one here answers your question, I suggest you do the search yourself, slog through the results, and see if anyone's come up with an explanation that fits your scenario.

  • Error Code -39 was returned by core audio driver

    Error Code -39 was returned by core audio driver.
    Does anyone know what that message means?
    Thanks.

    When did you see it?
    (It's an EOF error)

  • Error code -1 was returned by core audio driver

    Hello everyone,i have logic pro 7 fully registered and all of a sudden when i try and open any of my songs i get an error message.error -1 was returned by core audio driver?and battery is the only plug-in that has a line through it and it will not open?i rebooted,even tried to open a brand new autoload and everytime i try to load in battery i get the same error message?If anyone has a clue,cause i dont

    Try uninstalling 'battery' (I'm unfamiliar with that plug-in) & seeing if you still get error messages. If not, re-install 'battery'; but if the errors recur, you'll have to remove it again.
    N.B.: check the installation instructions first; manually removing the obvious components may not be sufficient (you may need to run the installer & select 'uninstall').

  • ERROR 39 WAS RETURNED BY THE CORE AUDIO DRIVER  ??"?????

    i keep getting this error
    ERROR 39 WAS RETURNED BY THE CORE AUDIO DRIVER ??"?????
    how do i make it go away!

    a -39 is an EoF (end of File) error. the first thing i'd suggest is to unlock all tracks, then re-lock them to let them re-render

  • Why is logic pro only showing 8 inputs with core audio?

    I use Logic Pro and Pro Tools HD TDM and I have 2 audio interfaces with a total of 20 analog inputs.  It seems that in Logic, I can only access 8 inputs. I suspect this has something to do with core audio and logic but there has to be a way around this that allows me to use all 20 inputs right?  Any help would be greatly appreciated.

    Too bad you're not running an earlier version of Pro Tools, prior to 8.03 or you could use your system under DAE and have access to the HD system in Logic, or at least in some versions of Logic 9.
    http://avid.force.com/pkb/articles/en_US/Compatibility/en363063
    You will be limited to 8 ins under core audio as I recall... this is due to Avid's core audio driver.
    Here's more about HD support.
    http://documentation.apple.com/en/logicpro/tdmguide/index.html#chapter=preface%2 6section=1%26tasks=true

  • Removing Core Audio driver

    I've recently tried to install the digidesign Mbox to run with garageband, but had no luck. I installed the appropriate Core Audio driver with no problem, but now I can't get it off of my system. I've ran the unistall that came with the download but it still is showing up in my activity monitor as "coreaudiod" and is slightly slowing down my machine. Any thoughts on how to completely remove this driver from my system? Thanks!

    What you see in Activity Monitor is the audio driver of the OS.
    You might quit it. It will automatically restart if any application that has sound implemented is active.
    I've done so when system sounds behave unnormal.

  • Stupid question...where does the digidesign core audio driver belong

    hey,
    I did something really stupid and took out the digidesign core audio driver and I can't remember where to put it back. I've got a tdm system and never use the digihardware via core audio. now in order to switch from core audio to dae I have to quit logic and reboot where as before I could launch dae from within logic with out having to quit the program. I suspect this is because I removed the digicore audio driver.
    any help would be appreciated.
    ej

    Probably get a faster response on the Digi forums.
    Good luck!

  • Error Code 39 returned by core audio driver

    Any idea what this is, it doesn't give me any other information. It comes within 2 seconds of playing my audio. I have a lot of stuff on there, but I also have a Big powerful Mac G5. I increased the buffer size, that didn't do anything. It doesn't crash, just won't let me do anything until I press continue, then comes up 2 seconds later.

    I have had the same happen to me. I did a search on the forum and the best I could find is that it isn't really listed anywhere what it means.
    I think it means that Core Audio needs to catch up. When this happens to me, I just hit return so that it starts playing again from the beginning.
    I have to ask, do you have a million (exaggeration) little regions in your Arrange window? Logic doesn't handle all those tiny pieces that well, so if you do you might consider making them into one big region to ease the load on Logic....
    Hope that helps, and welcome to the forum.
    X

  • Error code -36 with FAT 32 USB Flash Drive

    When copying files from my hard drive to a FAT32 formatted USB flash drive I keep getting error code -36 errors. I reformatted the flash drive to Mac OS Extended and the files copied fine. I formatted it back to FAT32 and the error returned. I need to use this drive with PC computers at school and can't leave it in the Mac format. Anyone know of a solution to this problem. It didn't do it with my G4 powermac and OS 10.4 but does with the mac mini with 10.6.

    This is a problem I've been dealing with since getting a new Macbook for christmas. In my case I use a Macbook with 10.6.2 at home, networked to a winxp computer, also use FAT formatted USB sticks for backups and taking files to work....and at work I use a mix of winxp machines and older macs running 10.3 and 10.4. I move files around between them all the time, and have had this annoying error -36 file copying problem with the 10.6.2 macbook since day 1.
    I did read about the dot_clean solution, and it does seem to work....sometimes. But the problem ISN'T just when copying a folder full of files. I also have the situation where I work on files in InDesign, and then export a PDF directly to the desktop. I then try to copy that ONE pdf file from the desktop to a FAT USB stick OR to an internet-accessed Appleshare volume, and I will get the dreaded error -36. MOST of the time when I get the error on a single file like this, it did actually copy and is useable on the USB stick / Appleshare volume and I can ignore the error. But sometimes not. Either way, it does show that the problem isn't just with folders of files, or even with the situation of copying a file from mac to windows to mac and then getting the error the next time you try to copy it to a win formatted volume.....you CAN get the error with an individual, just-created file in 10.6.2.
    I sure wish Apple would fix this already!

  • Garageband 1.1.0 Error code709 was returned by the Core Audio driver

    I receive this error code everytime I open Garageband.
    Once the error code is dislayed I need to quit GB and try to open it again but most times the error just reappears.
    G4 867MHZ   Mac OS X (10.3.9)   1.25GB Memory
    G4 867MHZ   Mac OS X (10.3.9)   1.25GB Memory

    I just did a search using "search discussions" using the term:
    "-50"
    (use the quotes, because they're important when doing this kind of search)
    It returned a lot of hits, and apparently you're not alone in wondering what this error means. Lots of people reporting it as an error in iTunes, and also something related to 10.4.9. But in the event no one here answers your question, I suggest you do the search yourself, slog through the results, and see if anyone's come up with an explanation that fits your scenario.

Maybe you are looking for

  • Please help me! Can´t turn off safari bookmarks

    iPhone 4s with latest software and iCloud. iCloud sync works fine with my iMac an MBP, but I have a major problem with the iPhone. Have read several tips on how to solve the sync issues, but my problem is that it the thing refuses to turn off the boo

  • New computer-how to transfer iTunes library?

    I am changing computers, and have my music on my old computer's iTunes library and my existing (good) iPod. If I sync my existing iPod to the new (blank) library I will lose my songs. I have not yet erased the iTunes library from the old computer. Ca

  • How do I update the RAW plug-in in CS5 so that it works with my Canon EOS700D?

    I have downloaded and installed version 7.4 of DNG but CS5 still shows a previous version.  Just to make sure, I opened CS5 as an Administrator ans I did when installing DNG 7.4, but CS5 still shows an earlier version (6.7.1.340).

  • Getting pictures off of VX5500?  "Lockdown phone"?

    Would anyone have a suggestion for getting pictures off of a VX5500?  I was told it's a "lockdown phone", what's the most economical way of doing this?  I'm trying a number of things, but they take too long etc

  • Thin Client and Mac Server OS

    Where would I go to see if it is possbile to run an os server like an application server with thin clients loggin on to different profile.