Error Code -41 when connecting to WinXP shares

I used to be able to view and access my WinXP desktop's shared folders using my MacBook. Now, when I try, I get the following error:
"Sorry, the operation could not be completed because an unexpected error occurred (Error code -41)"
This happens after I select the folder on the desktop that I want to connect to.
I searched this forum and couldn't find any reference to Error Code -41. I googled it and found that others have had the error but the solutions proposed haven't helped.
Any ideas what could have caused it, and how to fix it?
MacBook Mac OS X (10.4.7)

Thanks for such an amazingly quick response.
I have downloaded Applejack and I'm glad to have learned of it (never heard of it before).
I also expanded my search in these forums and I found a reference that may solve the problem:
http://www.michna.com/kb/WxNotEnoughServerStorage.htm
This suggests that the problem is on the Windows machine. I checked my event log on the Windows machine looking for Event ID 2011 (as suggested by the page I found) and sure enough, there was one of those errors every time I tried to connect to the Windows machine from the Macbook. I have made the registry change suggested by the page above and with a little luck, that should solve the problem. (It figures that the problem is on the Windows machine rather than the Mac, huh?)
I'll report back.
MacBook Mac OS X (10.4.7)

Similar Messages

Error code 0xE800000 when connecting iPod Touch to iTunes 7.7

Since one week ago my iPod Touch 8GB was working properly with my iTunes. Then I upgraded to iTunes 7.7 and upgraded the Touch to 2.0. Now iTunes does not recognize the Touch anymore and does not connect to it. I cannot use the Touch anymore because it always tells me to connect to iTunes.
I tried to restore the Touch but nothing changes and iTunes refuse to recognize the device. Instead it responses with an unknown error (Error Code 0xE8000001). I tried all two USB 1.1 ports on my G4 400 Laptop as well as all two USB 2.0 over PCMCIA card. Always the same error.
Can anyone please let me know what I can do now to get the Touch back to work

Also getting this error and I can't seem to connect my iPhone to my laptop's iTunes. Tried re-installing iTunes but still no go.
Would appreciate any suggestion to try to resolve this issue.

HT1386 I keep getting error code OxE8000084 when connecting my ipod touch to iTunes?

Does anybody know what error code OxE8000084 means?

iTunes - Error codes and messages - http://support.apple.com/kb/TS3694.

Error code 306 when trying to connect to apple store

error code 306 when trying to connect to apple store

Refer here from Apple Article:
iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
For more information on other security software, see iTunes: Troubleshooting security software issues.

I keep getting error code 3212 when trying to connect to home sharing.. i am connected to the internet

i keep getting error code 3212 when trying to connect to home sharing.. i am connected to the internet

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Error code -50 when downloading music

I keep getting an error code -50 when I download music..it happens sporatically, about every third song I attempt to download. I have sent endless emails to suport..and no one has an answer--i've done the diagnostics and sent them to support--disabled my antivirus before downloading..Ive tried the check for purchases..nothing! the songs download to the point of "processing" then the error code pops up--I close iTunes and they just dissapear.the only thing on the hard drive I have ever found is files that will say "download" the do nothing if I import them to iTunes.Frankly, Im tired of losing music I wanted and can't re-download (as you can only download a song once-and even though its missing,it still shows in the purchase history)-I never have this problem if I get music from amazon.com. any ideas as to what causes this or how to fix it?

See if these help:
Tunes for Windows: Possible Music Store Errors
http://www.info.apple.com/kbnum/n93431
"Well Known" TCP and UDP Ports Used By Apple Software Products
http://www.info.apple.com/kbnum/n106439
iTunes for Windows: Connection Issues when using Internet Filters, Accelerators , or Firewalls
http://www.info.apple.com/kbnum/n93434
Instructions on using MSCONFIG to troubleshoot conflicts in Windows
http://www.info.apple.com/kbnum/n302538

Error code 0x80092013 when trying to access iTunes store

I currently have the lastest version of iTunes unstalled on a Windows Vista PC. For a few months now, I get the error code 0x80092013 when trying to connect to the iTunes store or log in to my iTunes account. I have tried to run diagnostics but there is no help availavle because iTunes will not connect to the internet to get the help I need.
I have scoured the interent for a solution to this problem and have tried everything I have come accross, from re-installing to reading every support page I can find. I am becoming so frustrated trying to fix this problem, it is not my apple ID as my iPad works perfectly fine. If anyone can give me a solution that actually works it would be greatley appreciated

After some research I found the following tip to be working:
https://discussions.apple.com/message/25038447#25038447
So I changed my IPv4 as well as IPv6 DNS-Servers under Windows Network Preferences and everything worked again.
HTH
Christian

Error code 32768 when trying to use recovery disks

does ayone know what an 32768 error code is when trying to load recovery disks and how to solve it will not load windows from ram drive any help is appreciateded thanks... bobby

Hello,
Clear now. Your created recovery disk will not be supported on your unit. You need original HP recovery kit (708649-DH1) to recover your unit. Please share privately your name/address/phone and RCD kit will be shipped to you.
I am an HP employee.

Error code 23 when trying to upgrade???

Error code 23 when trying to upgrade/ also have lost wi-fi connection. A coindence or related problem?

Hi Dauby51,
You may need to uninstall and reinstall PSE 11, then reapply the updates.
Make sure you don't have any disk cleanup utilities that might be running during and after the install that may be altering any of the files installed or installation paths.
Give this a try and let me know how it goes,
Regards,
Pete

HT201210 I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

Well I spoke too soon.
The update was successful, but now I cannot connect to the 3GS data network.
Cannot get email and cannot open a page in Safari.
+"Safari could not open the page because the server stopped responding."+
+"Cannot Get Mail+
+THe mail server is not responding. Verify that you have entered the correct account info in Mail settings."+
Email and internet work fine on WiFi.........no data using 3GS network.
Looks like I will have to revert back to old OS.

Error message -1073807298 when connecting through TCP

I get the error code -1073807298 when I try to connect to a TCP raw socket VISA resource, the weirdest thing is that I actually can read the result of the queries I make. I fixed the problem reading one byte at a time but this is very inefficient (it uses a while loop) and I still get warnings, so I'd like to know if there is a way to fix this or if there is an equivalent of the "Serial Settings: Number of Bytes at Serial Port" for VISA TCP connections....
This is the WARNING that I get when I read one byte at a time:
Warning 1073676294 occurred at VISA Read in LV.vi
Possible reason(s):
VISA: (Hex 0x3FFF0006) The number of bytes transferred is equal to the requested input count. More data might be available.
This is the ERROR that I get when I set the byte count to 1024:
Error -1073807298 occurred at VISA Read in LV.vi
Possible reason(s):
VISA: (Hex 0xBFFF003E) Could not perform operation because of I/O error.
I enclosed the VI for your review,
Thanx in advance for your help,
Attachments:
LV.vi ‏22 KB

Hi,
While there is no equivalent of the "Serial Settings: Number of Bytes at Serial Port" for VISA TCP connections, one strategy is to make the first byte in your TCP string to contain the number of bytes to follow it. That way you can read that byte then know what to set the byte count to.
Regards,
John E.
Applications Engineering
National Instruments

At first error code 205, Error code 1 when using new user profile

Hi,
I'm using Windows Professional 8.1 with CS6 installed.
I now decided for CC, but as many other users I'm not even able to install it!
On my admin account I get the error code 205 when trying to launch CreativeCloudSet-Up.exe.
I read lots of similar posts and tried everything I found, e.g. creating a new Windows admin user profile - this broughtt me just one step further as the installers quits a little bit later with another error code (1).
My PC is a Quad CPU with 2.4GHz, 8GB of RAM and a 512GB SSD - so technical limitations (as I figured out might be indicated by error code 1) shouldn't be an issue!
And it is not even possible to drop an Email to Adobe Support as there is only chat and phone from Mo-Fr 9-17h - this is ridiculous...
Anyway - why are there no more simple Download-Links for the Apps?
Obviously Adobe seems not to be able to provide working installers - this whole CC thing is absolutely crap as I'm not able to use it!
I'd really appreciate if someone who had/has the same problem(s) would come up with a solution - and please - no standard links to dummy Adobe support pages!
Thanks a lot in advance and best regards
Carsten

Error 205 is an network connectivity issue.
I guess you getting error message as "Installer Failed -Download appears to be corrupted (-60) "
The recommend solutions are provided in the below link :
https://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
Tips:
1)If you are using Wireless/Wifi Internet , try with Ethernet wired connection .
2)Disable FIrewall, if you are on office or managed corporate network, if it is not possible to disable Network FIrewall , try Adding ports list to network firewall Allow/Whitelist.
3)Check whether the LAN settings is set to detect settings Automatically.
4)Try with different Internet connection , possibly different Internet Service Provider.
If face same issue even using different Internet Service Provider connection , you may contact Adobe Support and inform them regarding the issue.
Because , it will be necessary to check log files like PDAPP , OOBELIB...etc
However , for time being , it is smart to install and use the Apps using alternative method .
There is a direct download links for all CC apps .
http://prodesigntools.com/adobe-cc-2014-direct-download-links.html
let me know if you need any help
Let me know if you are office network or any managed network , I will provide you list of Adobe ports .

Getting error code 49 when downloading Bridge. how do i fix this

I am getting error code 49 when downloading Bridge.
It seems Adobe CHAT is non-existent. Can anyone help?

The chat link can be elusive as can the people that support it over the weekend. It does work, at least for most people, but not all.
Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Make sure you are logged in to the Adobe site, have cookies enabled, clear your cookie cache. If it fails to connect try using a different browser.
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )
It looks somewhat like the following when it gets thru properly (I don't think the 24/7 is a true story)...

RW-50004: Error code received when running external process.

Hi,
I am trying to install 11.5.10 on windows vista and receiveing following error.
RW-50004: Error code received when running external process. Check log for details. Running Database Install Driver for VIS Instance
When checked on the log file following is the error. Could anyone pls help me with this regard
There was an error while running the command - c:\OracleApps\visdb\9.2.0\temp\VIS_erp\adrun9i.cmd APPS APPS
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process.
"dbInstancecfg" file shows below error
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=erp.erp)(Port=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 13-JUL-2008 05:48:04
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
32-bit Windows Error: 5: Input/output error
addlnctl.cmd exiting with status 3
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
System error 1060 has occurred.
The specified service does not exist as an installed service.
.end err out.
File c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp\afmkinit_inst.cmd not instantiated in the current pass, this file will not be executed
Executing script in InstantiateFile:
c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp\afmkinit.cmd
script returned:
Sun 07/13/2008
05:48 AM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping INSTE8_PRF
Skipping INSTE8_APPLY
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1

Thanks for the update and the link was informational.
Can I install following on windows vista? Pls confirm.
Oracle® Applications 11i Release 10.2 Media Pack for
Microsoft Windows (32-bit) No That's not possible, if you would like to use this machine for Applications then the OS needs to be changed or install vmware/Microsoft Virtual PC with a Certified Operating system to be able to use Applications.
Thanks
Ronald

I have an iPod 2nd gen. that keeps having an error code 9 when trying to restore. Any ideas on how to fix?

I have an iPod 2nd gen that keeps having an error code 9 when trying to restore. Any ideas on how to fix?

Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

Error Code -41 when connecting to WinXP shares

Similar Messages

Maybe you are looking for